TIMETRA-MIRROR-MIB Table View

The tMirrorDestinationTable has an entry for each mirror destination
configured on the virtual router.

tMirrorDestinationEntry row .1.3.6.1.4.1.6527.3.1.2.18.1.1.1

Each row represents information about a particular mirror destination.
Entries are created by user. Entries are deleted by user.

Entries in this table have an implied StorageType of 'nonVolatile'.
That is, …

Indexes

tMirrorDestinationIndex

Column	Syntax	OID
tMirrorDestinationIndex Since packet mirroring is setup like a service, tMirrorDestinationIndex represents the Service ID associated with this mirror destination. It is used as unique index in to this table. Only 255 mirror destination service…	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.1
tMirrorDestinationRowStatus The row status used for creation and deletion of entries in tMirrorDestinationTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.2
tMirrorDestinationDescription Generic information about this mirror destination.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.3
tMirrorDestinationFC The forwarding class for all packets transmitted to this mirror destination.	TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.4
tMirrorDestinationRemoteSource When this value is 'true', the sources of the mirrored packets can be on remote ESRs. If 'false', no remote ESR access is allowed to the mirror destination.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.5
tMirrorDestinationSapPortId The ID of the access port where the Service Access Point (SAP) associated with this mirror destination service is defined. The default value for this object indicates invalid port-id.	TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.6
tMirrorDestinationSapEncapValue The value of the label used to identify the SAP on the access port specified by tMirrorDestinationSapPortId.	TIMETRA-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.7
tMirrorDestinationSdpNumberobsolete The ID for the Service Destination Point (SDP) associated with this mirror destination service. A value of 0 indicates that no SDP is associated with the mirror service	TIMETRA-SERV-MIBSdpIdr/w Type Constraints: range: 0..32767	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.8
tMirrorDestinationSdpDestEncapobsolete The frame type expected by the far end ESR at the other end of the SDP identified by tMirrorDestinationSdpNumber.	Enumerationr/w Enumerated Values: 1 none 2 pos 3 ethernet	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.9
tMirrorDestinationAdminStatus The administrative status for this destination entry	TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.10
tMirrorDestinationOperStatus The operational status for this destination entry	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.11
tMirrorDestinationTranslateDisableobsolete When this value is 'true', automatic translation of Ethernet to PPP/BCP and PPP to PPPoE is disabled. When 'false' the translation is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.12
tMirrorDestinationSliceSize The value of the slice-size i.e. maximum portion of the mirrored frame that will be transmitted to the mirror destination. Any frame larger than the slice-size will be truncated to this value before transmission to the …	Unsigned32r/w Constraints: range: 128-9216 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.13
tMirrorDestinationPppoeDestMacAddrobsolete This value specifies the MAC address to be used for the Destination MAC Address field of the PPPoE Header when using PPPoE encapsulation of PPP mirrored packets. (The tMirrorDestinationTranslateDisable should be 'false'…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.14
tMirrorDestinationPppoeSrcMacAddrobsolete This value specifies the MAC address to be used for the Source MAC Address field of the PPPoE Header when using PPPoE encapsulation of PPP mirrored packets. This MAC address must not be a broadcast or multicast address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.15
tMirrorDestinationPppoeEtypeobsolete This value defines the PPPoE Ethertype that will be included in the PPPoE header for PPPoE encapsulation of PPP mirrored packets.	TEtherTyper/w Type Constraints: range: 1536..65535	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.16
tMirrorDestinationPppoeSessionIdobsolete This value defines the PPPoE session ID that will be included in the PPPoE header for PPPoE encapsulation of PPP mirrored packets.	TSessionIdr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.17
tMirrorDestinationSdpEgrSvcLabelobsolete This value specifies the egress service label. It is used by the SDP associated with this mirror destination entry to differentiate to the far-end each mirror destination service bound to the SDP. This label is obtained…	Unsigned32r/w Constraints: range: 16-1048575 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.18
tMirrorDestinationSapEgressQosPolicyId This value specifies a row in the tSapEgressTable corresponding to the egress QoS policy. A value of 0 means that no QoS policy is specified.	TIMETRA-TC-MIBTPolicyIDr/w Type Constraints: range: 0..65540	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.19
tMirrorDestinationEncapsulation This value maintains the encapsulation supported by this service.	TmnxMirrorEncapTyper/w Type Values: 1 ether 2 frameRelay 3 ppp 4 atmSdu 5 satopE1 6 satopT1 7 satopE3 8 satopT3 9 cesopsn 10 cesopsnCas 11 ipOnly	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.20
tMirrorDestinationSdpOperEgrSvcLabelobsolete If there is an active sdp being used by this service, tMirrorDestinationSdpOperEgrSvcLabel maintains the operational label being used by the SDP. If the SDP is being used, a value of '0' means the SDP transport is inact…	TMplsLabel Type Constraints: range: 0..1048575	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.21
tMirrorDestinationEnablePortId The value of tMirrorDestinationEnablePortId specifies whether the port-id of the system is to be included in the mirrored packets. The value of 'true' indicates that the port-id is to be included in the m…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.22
tMirrorDestSapEgrIpMirrorSA This value of tMirrorDestSapEgrIpMirrorSA specifies the MAC address to be used for the Source MAC Address field in the mirrored packets when using IP mirror service. This MAC address must not be a broadca…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.23
tMirrorDestSapEgrIpMirrorDA This value of tMirrorDestSapEgrIpMirrorDA specifies the MAC address to be used for the destination MAC Address field in the mirrored packets when using IP mirror service. An 'inconsistentValue' error is r…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.24
tMirrorDestLastChanged The value of tMirrorDestLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.25
tMirrorDestSapEgrPortQGrp The value of tMirrorDestSapEgrPortQGrp specifies the access egress port queue group Policy for this SAP. This object must be set along with tMirrorDestSapEgrPortQGrpInstId object. An 'inconsistentValue' e…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.26
tMirrorDestSapEgrPortQGrpInstId The value of tMirrorDestSapEgrPortQGrpInstId specifies the access egress port queue group Policy for this SAP. This object must be set along with tMirrorDestSapEgrPortQGrp object. An 'inconsistentValue' e…	TIMETRA-TC-MIBTQosQGrpInstanceIDorZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.27
tMirrorDestCreationOrigin The value of tMirrorDestCreationOrigin indicates the protocol or mechanism that created this conceptual row.	TIMETRA-TC-MIBTmnxCreateOrigin Type Values: 1 manual 2 bgp-l2vpn 3 radius 4 bgpSignalL2vpn 5 multiSegmentPW 6 vplsPmsi 7 dynScript 8 bof 9 bgpSignalVpws 12 vsd 13 evpn 14 vsd-sd 15 satellites 16 fpe 17 evpnIsa 18 greBridged 19 tli 20 pdn 23 ipsec 24 esa 25 pfcpCups 26 manual-mci	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.28
tMirrorDestinationName The value of tMirrorDestinationName specifies the name of the mirror destination service. This value should be unique within the service domain.	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.29
tMirrorDestPcapSessionName The value of tMirrorDestPcapSessionName indicates the Packet Capture (PCAP) session name for the PCAP session that is currently configured on this mirror destination service.	TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.30
tMirrorDestSamplingRate The value of tMirrorDestSamplingRate is used by the collector to determine the rate at which traffic information is checked for the purposes of analytics.	Unsigned32r/w Constraints: range: 256-10000 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.1.1.1.31

Each row in this table represents a remote source bound to a the
mirror destination service.

tMirrorDestinationRemoteSourceEntry row .1.3.6.1.4.1.6527.3.1.2.18.1.2.1

Each row represents information about a remote source associated with
a mirror destination entry defined in tMirrorDestinationTable. Each
mirror destination may be associated with 0 or more remote sources.
Entries are c…

Indexes

tMirrorDestinationIndex tMirrorDestinationRemoteSourceAddr

Column	Syntax	OID
tMirrorDestinationRemoteSourceAddr The IP address of the remote source or the far-end ESR which is allowed to be a source of packets for the mirror destination service defined by tMirrorDestinationIndex.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.1
tMirrorDestinationRemoteSourceLabelSignaling This object specifies the label signaling protocol used to obtain the ingress labels associated with the far-end ESR. When the value of this object is none(1) then the labels are manually assigned at the time the remote…	Enumerationr/w Enumerated Values: 1 none 2 tldp	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.2
tMirrorDestinationRemoteSourceIngSvcLabel This value specifies the ingress service label. It is used to identify a remote source bound to the mirror destination service. This label is obtained manually or through signalling with the far end. When…	Unsigned32r/w Constraints: range: 32-1048575 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.3
tMirrorDestinationRemoteSourceRowStatus The row status used for creation and deletion of entries in tMirrorDestinationRemoteSourceTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.4
tMirrorDestinationRemoteSourceOperIngSvcLabel This value indicates the ingress service label. It is used to identify a remote source bound to the mirror destination service. This label is obtained manually or through signalling with the far end. A value of '0' impl…	TMplsLabel Type Constraints: range: 0..1048575	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.5
tMirrorDestRemoteSrcLastChgd The value of tMirrorDestRemoteSrcLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local ne…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.6
tMirrorDestRemoteSrcIsICB The value of tMirrorDestRemoteSrcIsICB specifies whether this is an inter-chassis backup remote source.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.7
tMirrorDestRemoteSrcVcId The value of the object tMirrorDestRemoteSrcVcId specifies the virtual circuit associated with this remote source. The default value of this object is equal to the service ID.	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.6527.3.1.2.18.1.2.1.8

The tMirrorDestL3EncTable serves to configure Layer-3 encapsulation
information for the mirror destinations.
          
The encapsulation referred to the encapsulation header added to
identify a particular mirrored source flow.

tMirrorDestL3EncEntry row .1.3.6.1.4.1.6527.3.1.2.18.1.6.1

Each row represents information about the Layer-3 encapsulation header
of a particular mirror destination.

Rows in this table can be created or deleted via SNMP operations.

A row can only be cr…

Indexes

tMirrorDestinationIndex

Column	Syntax	OID
tMirrorDestL3EncRowStatus The value of tMirrorDestL3EncRowStatus specifies the row status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.1.6.1.1
tMirrorDestL3EncLastCh The value of tMirrorDestL3EncLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.1.6.1.2
tMirrorDestL3EncHeaderType The value of tMirrorDestL3EncHeaderType specifies the type of header encapsulation of this mirror destination. A value for this object must be provided when the row is created.	TmnxMirrorDestinationHeaderTyper/w Type Values: 1 ipUdpShim 2 ipGre 4 ipUdpShimSampled	.1.3.6.1.4.1.6527.3.1.2.18.1.6.1.3
tMirrorDestL3EncRouter The value of tMirrorDestL3EncRouter specifies the identifier of the router instance to be used with routed encapsulation.	TIMETRA-TC-MIBTmnxVRtrIDr/w Type Constraints: range: 1..10240	.1.3.6.1.4.1.6527.3.1.2.18.1.6.1.4
tMirrorDestL3EncUseDirectionBit The value of tMirrorDestL3EncUseDirectionBit specifies if the highest bit in the Interception ID field of the shim header is used to indicate the direction of the mirrored traffic flow. If the value of tM…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.1.6.1.5

The tMirrorDestL3GwTable serves to configure Layer-3 encapsulation
information for mirror destination gateways.
          
The encapsulation referred to is the prepended encapsulation header
added to identify a particular mirrored source flow.

tMirrorDestL3GwEntry row .1.3.6.1.4.1.6527.3.1.2.18.1.8.1

Each row represents information about the Layer-3 encapsulation header
of a particular mirror destination gateway.

Rows in this table can be created or deleted via SNMP operations.

A row can on…

Indexes

tMirrorDestinationIndex tMirrorDestL3GwRole

Column	Syntax	OID
tMirrorDestL3GwRole The value of tMirrorDestL3GwRole specifies the role of this gateway. The only value supported is 'primary'.	Enumeration Enumerated Values: 1 primary	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.1
tMirrorDestL3GwRowStatus The value of tMirrorDestL3GwRowStatus specifies the row status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.2
tMirrorDestL3GwLastCh The value of tMirrorDestL3GwLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.3
tMirrorDestL3GwSrcAddrType The value of tMirrorDestL3GwSrcAddrType specifies the address type of tMirrorDestL3GwSrcAddr. The only values supported are 'unknown' and 'ipv4'.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.4
tMirrorDestL3GwSrcAddr The value of tMirrorDestL3GwSrcAddr specifies the source IP address to be used with this gateway. Only IPv4 addresses are supported.	OctetStringr/w Constraints: range: 4-4 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.5
tMirrorDestL3GwDstAddrType The value of tMirrorDestL3GwDstAddrType specifies the address type of tMirrorDestL3GwDstAddr. The only values supported are 'unknown' and 'ipv4'.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.6
tMirrorDestL3GwDstAddr The value of tMirrorDestL3GwDstAddr specifies the destination IP address of this gateway. Only IPv4 addresses are supported.	OctetStringr/w Constraints: range: 4-4 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.7
tMirrorDestL3GwUdpSrcPort The value of tMirrorDestL3GwUdpSrcPort specifies the UDP source port to be used with this gateway if the value of the object tMirrorDestL3EncHeaderType in the corresponding row in the is equal to 'ipUdpShim'.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.8
tMirrorDestL3GwUdpDstPort The value of tMirrorDestL3GwUdpDstPort specifies the UDP source port to be used with this gateway if the value of the object tMirrorDestL3EncHeaderType in the corresponding row in the is equal to 'ipUdpShim'.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.18.1.8.1.9

The tMirrorSourceTable has information about each mirror source.

tMirrorSourceEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.1.1

Each row represents information about a particular mirror source.
Entries are created and deleted when the mirror destination service
associated with this mirror source is created or deleted respectively.

E…

Indexes

tMirrorSourceIndex

Column	Syntax	OID
tMirrorSourceIndex The mirror destination service ID that defines the context of the mirror source. The mirror destination service represented by this ID must exist as an entry within the tMirrorDestinationTable.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.18.2.1.1.1
tMirrorSourceAdminStatus The admininstrative status for this Mirror source entry.	TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.2.1.1.2
tMirrorSourceRowStatus The row status used for creation and deletion of entries in tMirrorSourceTable. The mirror destination service represented by the tMirrorSourceIndex must exist as an entry within the tMirrorDestinationTable or row crea…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.1.1.3
tMirrorSourceLastChgd The value of tMirrorSourceLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.1.1.4
tMirrorSourceCreationOrigin The value of tMirrorSourceCreationOrigin specifies the protocol or mechanism that created this conceptual row. The only value that can be set in an SNMP SET PDU is 'config (3)'. A 'wrongValue' error is r…	Enumerationr/w Enumerated Values: 1 debug 2 li 3 config	.1.3.6.1.4.1.6527.3.1.2.18.2.1.1.5
tMirrorSourceName The value of tMirrorSourceName specifies the Mirror Source name which identifies the source for mirroring.	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.18.2.1.1.6

Each row in this table represents an IP Filter Entry associated with a
mirror source.

tMirrorSourceIpFilterEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.2.1

Each row represents information about a particular IP Filter Entry
associated with a mirror source defined in the tMirrorSourceTable.
Entries are created by user. Entries are deleted by user, or by agent
when the tMirro…

Indexes

tMirrorSourceIndex tMirrorSourceIpFilter tMirrorSourceIpFilterParams

Column	Syntax	OID
tMirrorSourceIpFilter This value specifies the IP Filter ID of the IP Filter Entry associated with the mirror source defined by tMirrorSourceIndex.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.18.2.2.1.1
tMirrorSourceIpFilterParams This value corresponds to the Entry ID which identifies a specific 'Entry' within the IP Filter defined by tMirrorSourceIpFilter above. Each IP Filter has a number of 'Entries' associated with it and each…	TIMETRA-FILTER-MIBTEntryId Type Constraints: range: 1..2097151	.1.3.6.1.4.1.6527.3.1.2.18.2.2.1.2
tMirrorSourceIpFilterRowStatus The row status used for creation and deletion of entries in tMirrorSourceIpFilterTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.2.1.3
tMirrorSourceIpFilterLastChgd The value of tMirrorSourceIpFilterLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local n…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.2.1.4
tMirrorSourceIpFilterIntceptId The value of tMirrorSourceIpFilterIntceptId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifierr/w Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.2.2.1.5
tMirrorSourceIpFilterSessionId The value of tMirrorSourceIpFilterSessionId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.2.2.1.6

The tMirrorSourceMacFilterTable contains information about each MAC
Filter Entry associated with a mirror source.

tMirrorSourceMacFilterEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.3.1

Each row represents information about a MAC Filter Entry associated
with a mirror source defined in the tMirrorSourceTable. Entries are
created by user. Entries are deleted by user, or by agent when the
tMirrorSourceTab…

Indexes

tMirrorSourceIndex tMirrorSourceMacFilter tMirrorSourceMacFilterParams

Column	Syntax	OID
tMirrorSourceMacFilter This value specifies the MAC Filter ID of the MAC Filter Entry associated with the mirror source defined by tMirrorSourceIndex.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.18.2.3.1.1
tMirrorSourceMacFilterParams This value corresponds to the Entry ID which identifies a specific 'Entry' within the MAC Filter defined by tMirrorSourceMacFilter. Each MAC Filter has a number of 'Entries' associated with it and each En…	TIMETRA-FILTER-MIBTEntryId Type Constraints: range: 1..2097151	.1.3.6.1.4.1.6527.3.1.2.18.2.3.1.2
tMirrorSourceMacFilterRowStatus The row status used for creation and deletion of entries in tMirrorSourceMacFilterTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.3.1.3
tMirrorSourceMacFilterLastChgd The value of tMirrorSourceMacFilterLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.3.1.4
tMirrorSourceMacFilterIntceptId The value of tMirrorSourceMacFilterIntceptId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifierr/w Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.2.3.1.5
tMirrorSourceMacFilterSessionId The value of tMirrorSourceMacFilterSessionId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.2.3.1.6

Each row in this table represents an MPLS ingress label filter entry
associated with a mirror source.

tMirrorSourceIngressLabelEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.4.1

Each row represents information about an MPLS ingress label filter
entry associated with a mirror source. Entries are created by user.
Entries are deleted by user, or by agent when the tMirrorSourceTable
entry is destro…

Indexes

tMirrorSourceIndex tMirrorSourceIngressLabelIndex

Column	Syntax	OID
tMirrorSourceIngressLabelIndex This value specifies the MPLS label associated with this MPLS ingress label filter entry. Ingress MPLS frames with top-of-stack label matching to this value will be mirrored to a given mirror destination.	TMplsLabel Type Constraints: range: 0..1048575	.1.3.6.1.4.1.6527.3.1.2.18.2.4.1.1
tMirrorSourceIngressLabelRowStatus The row status used for creation and deletion of entries in tMirrorSourceIngressLabelTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.4.1.2
tMirrorSourceIngLabelLastChgd The value of tMirrorSourceIngLabelLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local n…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.4.1.3

This table defines a list of (physical interface) ports for each
mirror source

tMirrorSourcePortEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.5.1

Each row represents information about a port associated with a Mirror
source defined in tMirrorSourceTable. Entries are created by user.
Entries are deleted by user, or by agent when the tMirrorSourceTable
entry is dest…

Indexes

tMirrorSourceIndex tMirrorSourcePortIndex

Column	Syntax	OID
tMirrorSourcePortIndex This value defines the Ethernet physical interface associated with the mirror source defined by tMirrorSourceIndex.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.18.2.5.1.1
tMirrorSourcePortRowStatus The row status used for creation and deletion of entries in tMirrorSourcePortTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.5.1.2
tMirrorSourcePortEgressEnabled If this value is set to 'true', packets egressing the port will be mirrored. If 'false', egress packets will not be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.5.1.3
tMirrorSourcePortIngressEnabled If this value is set to 'true', packets ingressing the port will be mirrored. If 'false', ingress packets will not be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.5.1.4
tMirrorSourcePortLastChgd The value of tMirrorSourcePortLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local netwo…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.5.1.5
tMirrorSourcePortLicenseState The value of tMirrorSourcePortLicenseState indicates the state of the li-source port license configured for this system. This field is only relevant for lawful intercept configuration.	Enumeration Enumerated Values: 0 unknown 1 ok 2 insufficient 3 violation	.1.3.6.1.4.1.6527.3.1.2.18.2.5.1.6

Each row in this table represents a SAP (Service Access Point)
associated with a mirror source.

tMirrorSourceSapEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.6.1

Each row represents information about a SAP associated with a mirror
source defined in tMirrorSourceTable. Entries are created by user.
Entries are deleted by user, or by agent when the tMirrorSourceTable
entry is destr…

Indexes

tMirrorSourceIndex tMirrorSourceSapPortId tMirrorSourceSapEncapValue

Column	Syntax	OID
tMirrorSourceSapPortId The ID of the access port for the Service Access Point (SAP) associated with the mirror source defined by tMirrorSourceIndex.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.2
tMirrorSourceSapEncapValue The value of the label used to identify the SAP on the access port specified by tMirrorSourceSapPortId.	TIMETRA-TC-MIBTmnxEncapVal	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.3
tMirrorSourceSapRowStatus The row status used for creation and deletion of entries in tMirrorSourceSapTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.4
tMirrorSourceSapEgressEnabled If this value is set to 'true', packets egressing the SAP will be mirrored. If 'false', egress packets will not be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.5
tMirrorSourceSapIngressEnabled If this value is set to 'true', packets ingressing the SAP will be mirrored. If 'false', ingress packets will not be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.6
tMirrorSourceSapLastChgd The value of tMirrorSourceSapLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local networ…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.7
tMirrorSourceSapIntceptId The value of tMirrorSourceSapIntceptId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifierr/w Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.8
tMirrorSourceSapSessionId The value of tMirrorSourceSapSessionId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.2.6.1.9

Each row in this table represents a subscriber associated with a
mirror source.

tMirrorSourceSubscriberEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.8.1

Each row represents information about a subscriber associated with a
mirror source defined in tMirrorSourceTable.

Entries are created by user.

Entries are deleted by user, or by agent when the …

Indexes

tMirrorSourceIndex tMirrorSourceSubIdent

Column	Syntax	OID
tMirrorSourceSubIdent The value of tMirrorSourceSubIdent specifies the subscriber identification of this subscriber on this mirror source.	TIMETRA-TC-MIBTLNamedItem Type Constraints: range: 1..64	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.1
tMirrorSourceSubRowStatus The row status used for creation and deletion of entries in the tMirrorSourceSubscriberTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.2
tMirrorSourceSubLastChanged The value of tMirrorSourceSubLastChanged is the timestamp of the last change to this row in the tMirrorSourceSubscriberTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.3
tMirrorSourceSubPortId The value of tMirrorSourceSubPortId specifies the ID of the access port for the Service Access Point (SAP) associated with the mirror source defined by tMirrorSourceIndex.	TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.4
tMirrorSourceSubEncapValue The value of tMirrorSourceSubEncapValue specifies the label used to identify the SAP on the access port specified by tMirrorSourceSubPortId.	TIMETRA-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.5
tMirrorSourceSubIpAddrType The value of tMirrorSourceSubIpAddrType specifies the address type of address in tMirrorSourceSubIpAddr.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.6
tMirrorSourceSubIpAddr The value of tMirrorSourceSubIpAddr specifies the IP address of the remote source or the far-end ESR which is allowed to be a source of packets for the mirror destination service defined by tMirrorDestinationIndex.	OctetStringr/w Constraints: range: 20-20 range: 16-16 range: 4-4 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.7
tMirrorSourceSubMacAddr This value of tMirrorSourceSubMacAddr specifies the MAC address to be used to match the packets for tMirrorSourceSubIdent subscriber on tMirrorSourceIndex mirror source.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.8
tMirrorSourceSubSLAProfName The value of tMirrorSourceSubSLAProfName specifies the SLA profile name which identifies the hosts as source for mirroring.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.9
tMirrorSourceSubFC The value of tMirrorSourceSubFC specifies the forwarding classes traffic which should be mirrored. Setting multiple bits will mirror traffic from several forwarding classes.	TIMETRA-TC-MIBTFCSetr/w Type Values: 0 be 1 l2 2 af 3 l1 4 h2 5 ef 6 h1 7 nc	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.10
tMirrorSourceSubEgressEnabled The value of tMirrorSourceSubEgressEnabled specifies whether packets egressing the SAPs will be mirrored. If set to 'true', egress packets will be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.11
tMirrorSourceSubIngressEnabled The value of tMirrorSourceSubIngressEnabled specifies whether packets ingressing the SAPs will be mirrored. If set to 'true', ingress packets will be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.12
tMirrorSourceSubIntceptId The value of tMirrorSourceSubIntceptId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifierr/w Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.13
tMirrorSourceSubSessionId The value of tMirrorSourceSubSessionId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.14
tMirrorSourceSubHostType The value of tMirrorSourceSubHostType specifies the type of host to be mirrored.	Enumerationr/w Enumerated Values: 1 any 2 ipoe 3 ppp	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.15
tMirrorSourceSubIpFamily The value of tMirrorSourceSubIpFamily specifies the family of IP flows to be monitored for an IPoE type of host.	Enumerationr/w Enumerated Values: 1 any 2 ipv4 3 ipv6	.1.3.6.1.4.1.6527.3.1.2.18.2.8.1.16

This table defines a list of (physical interface) tmnxBsxIsaAaGrpEntry
rows for each mirror source

tMirrorSourceIsaAaGrpEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.9.1

Each row represents information about an tmnxBsxIsaAaGrpEntry
associated with a Mirror source defined in tMirrorSourceTable. Entries
are created by user. Entries are deleted by user, or by agent when the
tMirrorSourceTa…

Indexes

tMirrorSourceIndex tMirrorSourceIsaAaGrpIndex

Column	Syntax	OID
tMirrorSourceIsaAaGrpIndex tMirrorSourceIsaAaGrpIndex specifies the ISA Application Assurance Group TIMETRA-BSX-NG-MIB::tmnxBsxIsaAaGroupIndex as the mirror source defined by tMirrorSourceIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.18.2.9.1.1
tMirrorSourceIsaAaGrpRowStatus tMirrorSourceIsaAaGrpRowStatus specifies the creation and deletion of entries in tMirrorSourceIsaAaGrpTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.9.1.2
tMirrorSourceIsaAaGrpUnknownOnly tMirrorSourceIsaAaGrpUnknownOnly specifies the type of traffic to be mirrored by the ISA-AA Group. If this value is set to 'true', packets traversing the ISA-AA Group will be mirrored only if not identifi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.9.1.3
tMirrorSourceIsaAaGrpLastChgd The value of tMirrorSourceIsaAaGrpLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local ne…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.9.1.4

Each row in this table represents an IPv6 Filter Entry associated with
a mirror source.

tMirrorSourceIpv6FilterEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.17.1

Each row represents information about a particular IPv6 Filter Entry
associated with a mirror source defined in the tMirrorSourceTable.
Entries are created by user. Entries are deleted by user, or by agent
when the tMir…

Indexes

tMirrorSourceIndex tMirrorSourceIpv6Filter tMirrorSourceIpv6FilterParams

Column	Syntax	OID
tMirrorSourceIpv6Filter This value specifies the IPv6 Filter ID of the IPv6 Filter Entry associated with the mirror source defined by tMirrorSourceIndex.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.18.2.17.1.1
tMirrorSourceIpv6FilterParams This value corresponds to the Entry ID which identifies a specific 'Entry' within the IPv6 Filter defined by tMirrorSourceIpFilter above. Each IPv6 Filter has a number of 'Entries' associated with it and …	TIMETRA-FILTER-MIBTEntryId Type Constraints: range: 1..2097151	.1.3.6.1.4.1.6527.3.1.2.18.2.17.1.2
tMirrorSourceIpv6FilterRowStatus The row status used for creation and deletion of entries in tMirrorSourceIpFilterTable. The only values supported during a set operation are createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.17.1.3
tMirrorSourceIpv6FilterLastChgd The value of tMirrorSourceIpv6FilterLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.17.1.4
tMirrorSourceIpv6FilterIntceptId The value of tMirrorSourceIpv6FilterIntceptId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifierr/w Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.2.17.1.5
tMirrorSourceIpv6FilterSessionId The value of tMirrorSourceIpv6FilterSessionId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.2.17.1.6

The tMirrorSourceStatsTable contains statistical information about
each mirror source.

tMirrorSourceStatsEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.18.1

Each row contains statistical information about a particular mirror
source.

Indexes

tMirrorSourceIndex

Column	Syntax	OID
tMirrorSourceStatsTotalSrc The value of tMirrorSourceStatsTotalSrc indicates the total number of sources configured under this mirror source entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.2.18.1.1

This table defines a list of physical interfaces with the port VLAN
for each mirror source

tMirrorSourcePortVlanEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.19.1

Each row represents information about mirror of a VLAN associated with
a mirror source defined in tMirrorSourceTable.

Entries are created and deleted by setting
tMirrorSourcePortVlanRowStatus.

…

Indexes

tMirrorSourceIndex tMirrorSourcePortVlanPortId tMirrorSourcePortVlanVlan

Column	Syntax	OID
tMirrorSourcePortVlanPortId The value of tMirrorSourcePortVlanPortId specifies the Ethernet physical interface port index associated with the mirror source defined by tMirrorSourceIndex.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.18.2.19.1.1
tMirrorSourcePortVlanVlan The value of tMirrorSourcePortVlanVlan specifies the VLAN ID associated with the mirror source defined by tMirrorSourceIndex.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.6527.3.1.2.18.2.19.1.2
tMirrorSourcePortVlanRowStatus The value of tMirrorSourcePortVlanRowStatus specifies the row status used for creation and deletion of entries in table tMirrorSourcePortVlanTable The only values supported during a set operation are active(1), createAn…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.2.19.1.3
tMirrorSourcePortVlanEgrEnabled The value of tMirrorSourcePortVlanEgrEnabled specifies whether packets egressing the VLAN will be mirrored. If it is set to 'true', egress packets will be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.19.1.4
tMirrorSourcePortVlanIngEnabled The value of tMirrorSourcePortVlanIngEnabled specifies whether packets ingressing the VLAN will be mirrored. If it is set to 'true', ingress packets will be mirrored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.2.19.1.5
tMirrorSourcePortVlanLastChgd The value of tMirrorSourcePortVlanLastChgd specifies the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local ne…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.2.19.1.6

The table tMirrorSourceSapShimTable contains information used by the
collector for the purposes of analytics.

tMirrorSourceSapShimEntry row .1.3.6.1.4.1.6527.3.1.2.18.2.21.1

Each row of tMirrorSourceSapShimEntry represents information about a
mirror-source SAP used by the collector for the purposes of
analytics.

Entries are created by the agent when the associated
tMirrorSourc…

Indexes

tMirrorSourceSapShimPortId tMirrorSourceSapShimEncapValue

Column	Syntax	OID
tMirrorSourceSapShimPortId The object tMirrorSourceSapShimPortId indicates the ID of the access port for the mirror-source Service Access Point (SAP).	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.18.2.21.1.1
tMirrorSourceSapShimEncapValue The object tMirrorSourceSapShimEncapValue indicates the value of the label used to identify the mirror-source Service Access Point (SAP).	TIMETRA-TC-MIBTmnxEncapVal	.1.3.6.1.4.1.6527.3.1.2.18.2.21.1.2
tMirrorSourceSapShimId The object tMirrorSourceSapShimId indicates the shim ID corresponding to the mirror source Service Access Point (SAP). The ID is used by the collector for analytics.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.2.21.1.3

The tMirrorRadiusLiTable contains information about each mirror source
installed for LI (Lawful Intercept) on request by Radius.

tMirrorRadiusLiEntry row .1.3.6.1.4.1.6527.3.1.2.18.4.1.1

Each row represents information about a particular mirror source.
Entries are created and deleted by the system while processing LI
mirror requests from Radius.

Indexes

tRadiusLiMirrorDestinationIndex tRadiusLiSrcHostServiceId tRadiusLiSrcHostSapPortId tRadiusLiSrcHostsapEncapValue tRadiusLiSrcHostIpAddrType tRadiusLiSrcHostIpAddr tRadiusLiSrcHostMacAddr tRadiusLiSrcHostPppoeSessionId

Column	Syntax	OID
tRadiusLiMirrorDestinationIndex Since packet mirroring is setup like a service, tRadiusLiMirrorDestinationIndex represents the Service ID associated with this mirror destination.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.1
tRadiusLiSrcHostServiceId tRadiusLiSrcHostServiceId indicates the serviceId of the host being mirrored for LI.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.2
tRadiusLiSrcHostSapPortId tRadiusLiSrcHostSapPortId indicates the SAP port ID of the host being mirrored for LI.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.3
tRadiusLiSrcHostsapEncapValue tRadiusLiSrcHostsapEncapValue indicates the SAP Encap Value of the host being mirrored for LI.	TIMETRA-TC-MIBTmnxEncapVal	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.4
tRadiusLiSrcHostIpAddrType The value of tRadiusLiSrcHostIpAddrType indicates the address type of address in tRadiusLiSrcHostIpAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.5
tRadiusLiSrcHostIpAddr The value of tRadiusLiSrcHostIpAddr indicates the IP address of the subscriber host being mirrored for LI.	OctetString Constraints: range: 16-16 range: 4-4 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.6
tRadiusLiSrcHostMacAddr The value of tRadiusLiSrcHostMacAddr indicates the MAC address of the subscriber host being mirrored for LI.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.7
tRadiusLiSrcHostPppoeSessionId The value of tRadiusLiSrcHostPppoeSessionId indicates the PPPoE Session Id of the subscriber host being mirrored for LI.	TIMETRA-TC-MIBTmnxPppoeSessionId Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.8
tRadiusLiSrcHostId The value of tRadiusLiSrcHostId indicates the host Id of the subscriber host being mirrored for LI.	TIMETRA-TC-MIBTSubHostId	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.9
tRadiusLiMirrorDirection The value of tRadiusLiMirrorDirection indicates the direction of the packets being mirrored for LI.	TIMETRA-TC-MIBTDirection Type Values: 0 both 1 ingress 2 egress	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.10
tRadiusLiMirrorForwClassMap The value of tRadiusLiMirrorForwClassMap indicates the forwarding class(es) of the packets being mirrored for LI.	TIMETRA-TC-MIBTFCSet Type Values: 0 be 1 l2 2 af 3 l1 4 h2 5 ef 6 h1 7 nc	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.11
tRadiusLiSrcIntceptId The value of tRadiusLiSrcIntceptId indicates an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifier Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.12
tRadiusLiSrcSessionId The value of tRadiusLiSrcSessionId indicates an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.13
tRadiusLiSrcNatUsingOutsideIp The value of tRadiusLiSrcNatUsingOutsideIp indicates if this source corresponds to a Layer-2-Aware NAT subscriber and the system delivers the subscriber's outside IP address. The value of tRadiusLiSrcNatU…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.4.1.1.14

The table tMirrorLiDestTmplTable contains the templates for mirror
destination service instances invoked by Radius.

tMirrorLiDestTmplEntry row .1.3.6.1.4.1.6527.3.1.2.18.4.4.1

Each conceptual row represents a template for mirror destination
service instances invoked by Radius.

Conceptual rows are created and destroyed by SNMP SET operations on
the object tMirrorLiDestTmplRowStatu…

Indexes

tMirrorLiDestTmplName

Column	Syntax	OID
tMirrorLiDestTmplName The value of tMirrorLiDestTmplName specifies the name of the mirror destination template.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.1
tMirrorLiDestTmplLastChanged The value of tMirrorLiDestTmplLastChanged indicates the sysUpTime at the time of the last modification of this entry.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.2
tMirrorLiDestTmplRowStatus The value of tMirrorLiDestTmplRowStatus controls the creation and deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.3
tMirrorLiDestTmplEncapsulation The value of tMirrorLiDestTmplEncapsulation specifies the encapsulation supported by the mirror destination instances associated with this template.	TmnxMirrorEncapTyper/w Type Values: 1 ether 2 frameRelay 3 ppp 4 atmSdu 5 satopE1 6 satopT1 7 satopE3 8 satopT3 9 cesopsn 10 cesopsnCas 11 ipOnly	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.4
tMirrorLiDestTmplL3EncHeaderType The value of tMirrorLiDestTmplL3EncHeaderType specifies the type of header encapsulation supported by the mirror destination instances associated with this template.	TmnxMirrorDestinationHeaderTyper/w Type Values: 1 ipUdpShim 2 ipGre 4 ipUdpShimSampled	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.5
tMirrorLiDestTmplL3EncUseDirect The value of tMirrorLiDestTmplL3EncUseDirect specifies if the highest bit in the Interception ID field of the shim header is used to indicate the direction of the mirrored traffic flow. If the value of tM…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.6
tMirrorLiDestTmplL3EncRouter The value of tMirrorLiDestTmplL3EncRouter specifies the identifier of the router instance to be used with routed encapsulation, by default of a Radius attribute that specifies it. Use only in classic configuration mode;…	TIMETRA-TC-MIBTmnxVRtrIDr/w Type Constraints: range: 1..10240	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.7
tMirrorLiDestTmplL3SrcAddrType The value of tMirrorLiDestTmplL3SrcAddrType specifies the address type of tMirrorDestL3GwSrcAddr. The only values supported are 'unknown' and 'ipv4'.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.8
tMirrorLiDestTmplL3SrcAddr The value of tMirrorLiDestTmplL3SrcAddr specifies the source IP address to be used in the Layer-3 encapsulation. Only IPv4 addresses are supported.	OctetStringr/w Constraints: range: 4-4 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.9
tMirrorLiDestTmplL3UdpSrcPort The value of tMirrorLiDestTmplL3UdpSrcPort specifies the UDP source port to be used in the Layer-3 encapsulation if the value of the object tMirrorLiDestTmplL3EncHeaderType is equal to 'ipUdpShim'.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.10
tMirrorLiDestTmplL3UdpDstPort The value of tMirrorLiDestTmplL3UdpDstPort specifies the default UDP destination port to be used in the Layer-3 encapsulation if the value of the object tMirrorLiDestTmplL3EncHeaderType is equal to 'ipUdpShim'. …	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.11
tMirrorLiDestTmplL3EncRouterName The value of tMirrorLiDestTmplL3EncRouterName specifies the name of the router instance to be used with routed encapsulation, by default of a Radius attribute that specifies it. Use only in mixed configuration mode; oth…	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.18.4.4.1.12

The tMirrorLiSourceNatTable contains mirror source information for
NAT.
          
Conceptual rows in this table are created automatically by the system
for each row in the tMirrorSourceTable where the value of
tMirrorSourceIndex refers to a row in the  tMirrorDestinationTable
where the value of tMirrorDestinationEncapsulation is equal to 'ether'.

tMirrorLiSourceNatEntry row .1.3.6.1.4.1.6527.3.1.2.18.5.100.1

Each row represents NAT information about for a mirror source defined
in tMirrorSourceTable.

Indexes

tMirrorSourceIndex

Column	Syntax	OID
tMirrorLiSourceNatLastChanged The value of tMirrorLiSourceNatLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.100.1.2
tMirrorLiSourceNatDestMacAddr The value of tMirrorLiSourceNatDestMacAddr specifies the Destination MAC Address field of the of the ethernet encapsulation used for the NAT subscribers associated with this mirror source. The value of tM…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.5.100.1.3
tMirrorLiSourceNatSrcMacAddr The value of tMirrorLiSourceNatSrcMacAddr specifies the Source MAC Address field of the of the ethernet encapsulation used for the NAT subscribers associated with this mirror source. The value of tMirrorL…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.5.100.1.4
tMirrorLiSourceNatEthertype The value of tMirrorLiSourceNatEthertype specifies the ethertype of the ethernet encapsulation used for the NAT subscribers associated with this mirror source that have an intercept identifier. If no inte…	TEtherTyper/w Type Constraints: range: 1536..65535	.1.3.6.1.4.1.6527.3.1.2.18.5.100.1.5

The tMirrorLiNatLsnSubTable contains mirror source information
installed for Large Scale NAT (LSN) subscribers, including Dual Stack
Lite subscribers.

tMirrorLiNatLsnSubEntry row .1.3.6.1.4.1.6527.3.1.2.18.5.101.1

Each row represents information about a NAT LSN subscriber associated
with a mirror source defined in tMirrorSourceTable.

Indexes

tMirrorSourceIndex TIMETRA-VRTR-MIBvRtrID tMirrorLiNatLsnSubAddrType tMirrorLiNatLsnSubAddr tMirrorLiNatLsnSubPrefixLength

Column	Syntax	OID
tMirrorLiNatLsnSubAddrType The value of tMirrorLiNatLsnSubAddrType indicates the address type of tMirrorLiNatLsnSubAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.1
tMirrorLiNatLsnSubAddr The value of tMirrorLiNatLsnSubAddr indicates the inside IP address of the subscriber.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.2
tMirrorLiNatLsnSubPrefixLength The value of tMirrorLiNatLsnSubPrefixLength indicates the prefix length of the subscriber. If the value of tMirrorLiNatLsnSubAddrType is equal to 'ipv4', the value of tMirrorLiNatLsnSubPrefixLength must b…	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.3
tMirrorLiNatLsnSubRowStatus The row status used for creation and deletion of rows in the tMirrorLiNatLsnSubTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.4
tMirrorLiNatLsnSubLastChanged The value of tMirrorLiNatLsnSubLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.5
tMirrorLiNatLsnSubInterceptId The value of tMirrorLiNatLsnSubInterceptId specifies the intercept identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.6
tMirrorLiNatLsnSubSessionId The value of tMirrorLiNatLsnSubSessionId specifies the session identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.7
tMirrorLiNatLsnSubOperState The value of tMirrorLiNatLsnSubOperState indicates the operational state of this NAT LSN subscriber mirror source. The operational state depends on either the operational state of the ISA MDA where the mi…	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.5.101.1.8

The tMirrorLiNatL2awSubTable contains mirror source information
installed for Layer-2-Aware subscribers.

tMirrorLiNatL2awSubEntry row .1.3.6.1.4.1.6527.3.1.2.18.5.102.1

Each row represents information about a Layer-2-Aware NAT subscriber
associated with a mirror source defined in tMirrorSourceTable.

Indexes

tMirrorSourceIndex tMirrorLiNatL2awSubIdent

Column	Syntax	OID
tMirrorLiNatL2awSubIdent The value of tMirrorLiNatL2awSubIdent specifies the subscriber identification of this subscriber.	TIMETRA-TC-MIBTmnxSubIdentString Type Constraints: range: 1..64	.1.3.6.1.4.1.6527.3.1.2.18.5.102.1.1
tMirrorLiNatL2awSubRowStatus The row status used for creation and deletion of rows in the tMirrorLiNatL2awSubTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.102.1.2
tMirrorLiNatL2awSubLastChanged The value of tMirrorLiNatL2awSubLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.102.1.3
tMirrorLiNatL2awSubInterceptId The value of tMirrorLiNatL2awSubInterceptId specifies the intercept identifier. The value zero specifies that there is no intercept identifier configured.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.102.1.4
tMirrorLiNatL2awSubSessionId The value of tMirrorLiNatL2awSubSessionId specifies the session identifier. The value zero specifies that there is no intercept identifier configured.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.102.1.5
tMirrorLiNatL2awSubOperState The value of tMirrorLiNatL2awSubOperState indicates the operational state of this Layer-2-Aware NAT subscriber mirror source. The operational state depends on the operational state of the ISA MDA where th…	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.5.102.1.6

The tMirrorSourceLiMacFltrTable contains information about each
Li-mac-filter Entry associated with a mirror source.

tMirrorSourceLiMacFltrEntry row .1.3.6.1.4.1.6527.3.1.2.18.5.103.1

Each row represents information about a li-mac-filter Entry associated
with a mirror source defined in the tMirrorSourceTable. Entries are
created by user. Entries are deleted by user, or by agent when the
tMirrorSource…

Indexes

tMirrorSourceIndex tMirrorSourceLiMacFltr tMirrorSourceLiMacFltrParams

Column	Syntax	OID
tMirrorSourceLiMacFltr The value of the object tMirrorSourceLiMacFltr specifies the li-mac-filter name of the li-mac-filter entry associated with the mirror source defined by tMirrorSourceIndex.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.18.5.103.1.1
tMirrorSourceLiMacFltrParams The value tMirrorSourceLiMacFltrParams specifies the Entry ID which identifies a specific 'Entry' within the li-mac-filter defined by tMirrorSourceLiMacFltr. Each li-mac-filter has a number of 'Entries' …	TIMETRA-FILTER-MIBTLimitedEntryId Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.18.5.103.1.2
tMirrorSourceLiMacFltrRowStatus The value of the object tMirrorSourceLiMacFltrRowStatus is used for creation and deletion of entries in tMirrorSourceLiMacFltrTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.103.1.3
tMirrorSourceLiMacFltrLastChgd The value of tMirrorSourceLiMacFltrLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.103.1.4
tMirrorSourceLiMacFltrIntceptId The value of tMirrorSourceLiMacFltrIntceptId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifierr/w Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.5.103.1.5
tMirrorSourceLiMacFltrSessionId The value of tMirrorSourceLiMacFltrSessionId specifies an identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.103.1.6

The tMirrorLiNat64SubTable contains mirror source information
installed for Large Scale NAT (LSN) subscribers, including Dual Stack
Lite subscribers.

tMirrorLiNat64SubEntry row .1.3.6.1.4.1.6527.3.1.2.18.5.104.1

Each row represents information about a NAT64 subscriber associated
with a mirror source defined in tMirrorSourceTable.

Indexes

tMirrorSourceIndex TIMETRA-VRTR-MIBvRtrID tMirrorLiNat64SubAddrType tMirrorLiNat64SubAddr tMirrorLiNat64SubPrefixLength

Column	Syntax	OID
tMirrorLiNat64SubAddrType The value of tMirrorLiNat64SubAddrType indicates the address type of tMirrorLiNat64SubAddr. The value of tMirrorLiNat64SubAddrType is always equal to 'ipv6'.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.1
tMirrorLiNat64SubAddr The value of tMirrorLiNat64SubAddr indicates the inside IP address of the subscriber.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.2
tMirrorLiNat64SubPrefixLength The value of tMirrorLiNat64SubPrefixLength indicates the prefix length of the subscriber.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.3
tMirrorLiNat64SubRowStatus The row status used for creation and deletion of rows in the tMirrorLiNat64SubTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.4
tMirrorLiNat64SubLastChanged The value of tMirrorLiNat64SubLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.5
tMirrorLiNat64SubInterceptId The value of tMirrorLiNat64SubInterceptId specifies the intercept identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.6
tMirrorLiNat64SubSessionId The value of tMirrorLiNat64SubSessionId specifies the session identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.7
tMirrorLiNat64SubOperState The value of tMirrorLiNat64SubOperState indicates the operational state of this NAT64 subscriber mirror source. The operational state depends on either the operational state of the ISA MDA where the mirro…	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.5.104.1.8

The tMirrorLiNatLsnSub2Table contains mirror source information
installed for Large Scale NAT (LSN) subscribers, including Dual Stack
Lite subscribers.

tMirrorLiNatLsnSub2Entry row .1.3.6.1.4.1.6527.3.1.2.18.5.106.1

Each row represents information about a NAT LSN subscriber associated
with a mirror source defined in tMirrorSourceTable.

Indexes

tMirrorSourceIndex tMirrorLiNatLsnSub2RouterName tMirrorLiNatLsnSub2AddrType tMirrorLiNatLsnSub2Addr tMirrorLiNatLsnSub2PrefixLength

Column	Syntax	OID
tMirrorLiNatLsnSub2RouterName The value of tMirrorLiNatLsnSub2RouterName specifies the name of the router instance of the NAT LSN subscriber.	TIMETRA-TC-MIBTLNamedItem Type Constraints: range: 1..64	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.1
tMirrorLiNatLsnSub2AddrType The value of tMirrorLiNatLsnSub2AddrType indicates the address type of tMirrorLiNatLsnSub2Addr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.2
tMirrorLiNatLsnSub2Addr The value of tMirrorLiNatLsnSub2Addr indicates the inside IP address of the subscriber.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.3
tMirrorLiNatLsnSub2PrefixLength The value of tMirrorLiNatLsnSub2PrefixLength indicates the prefix length of the subscriber. If the value of tMirrorLiNatLsnSub2AddrType is equal to 'ipv4', the value of tMirrorLiNatLsnSub2PrefixLength mus…	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.4
tMirrorLiNatLsnSub2RowStatus The row status used for creation and deletion of rows in the tMirrorLiNatLsnSub2Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.5
tMirrorLiNatLsnSub2LastChanged The value of tMirrorLiNatLsnSub2LastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.6
tMirrorLiNatLsnSub2InterceptId The value of tMirrorLiNatLsnSub2InterceptId specifies the intercept identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.7
tMirrorLiNatLsnSub2SessionId The value of tMirrorLiNatLsnSub2SessionId specifies the session identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.8
tMirrorLiNatLsnSub2OperState The value of tMirrorLiNatLsnSub2OperState indicates the operational state of this NAT LSN subscriber mirror source. The operational state depends on either the operational state of the ISA MDA where the m…	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.5.106.1.9

The tMirrorLiNat64Sub2Table contains mirror source information
installed for Large Scale NAT (LSN) subscribers, including Dual Stack
Lite subscribers.

tMirrorLiNat64Sub2Entry row .1.3.6.1.4.1.6527.3.1.2.18.5.108.1

Each row represents information about a NAT64 subscriber associated
with a mirror source defined in tMirrorSourceTable.

Indexes

tMirrorSourceIndex tMirrorLiNat64Sub2RouterName tMirrorLiNat64Sub2AddrType tMirrorLiNat64Sub2Addr tMirrorLiNat64Sub2PrefixLength

Column	Syntax	OID
tMirrorLiNat64Sub2RouterName The value of tMirrorLiNat64Sub2RouterName specifies the name of the router instance of the NAT64 subscriber.	TIMETRA-TC-MIBTLNamedItem Type Constraints: range: 1..64	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.1
tMirrorLiNat64Sub2AddrType The value of tMirrorLiNat64Sub2AddrType indicates the address type of tMirrorLiNat64Sub2Addr. The value of tMirrorLiNat64Sub2AddrType is always equal to 'ipv6'.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.2
tMirrorLiNat64Sub2Addr The value of tMirrorLiNat64Sub2Addr indicates the inside IP address of the subscriber.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.3
tMirrorLiNat64Sub2PrefixLength The value of tMirrorLiNat64Sub2PrefixLength indicates the prefix length of the subscriber.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.4
tMirrorLiNat64Sub2RowStatus The row status used for creation and deletion of rows in the tMirrorLiNat64Sub2Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.5
tMirrorLiNat64Sub2LastChanged The value of tMirrorLiNat64Sub2LastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.6
tMirrorLiNat64Sub2InterceptId The value of tMirrorLiNat64Sub2InterceptId specifies the intercept identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.7
tMirrorLiNat64Sub2SessionId The value of tMirrorLiNat64Sub2SessionId specifies the session identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.8
tMirrorLiNat64Sub2OperState The value of tMirrorLiNat64Sub2OperState indicates the operational state of this NAT64 subscriber mirror source. The operational state depends on either the operational state of the ISA MDA where the mirr…	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.18.5.108.1.9

The table tMirrorSourceLiIpFltrTable contains information about each
LI IP filter or LI IPv6 filter entry associated with a mirror source.

tMirrorSourceLiIpFltrEntry row .1.3.6.1.4.1.6527.3.1.2.18.5.151.1

Each row represents information about an LI IP filter entry or an LI
IPv6 filter entry associated with a mirror source defined in
tMirrorSourceTable.

Entries can be created and deleted via SNMP SET operatio…

Indexes

tMirrorSourceIndex tMirrorSourceLiIpFltrType tMirrorSourceLiIpFltr tMirrorSourceLiIpFltrParams

Column	Syntax	OID
tMirrorSourceLiIpFltrType The value of the object tMirrorSourceLiIpFltrType specifies the type of the LI IP filter identified by the value of the object tMirrorSourceLiIpFltr. Only values fltrtypeselIp (1) and fltrtypeselIpv6 (4) …	TIMETRA-FILTER-MIBTFilterType Type Values: 0 fltrtypeselNone 1 fltrtypeselIp 2 fltrtypeselMac 3 fltrtypeselCpm 4 fltrtypeselIpv6 5 fltrtypeselCpm6 6 fltrtypeselCpmMac	.1.3.6.1.4.1.6527.3.1.2.18.5.151.1.1
tMirrorSourceLiIpFltr The value of the object tMirrorSourceLiIpFltr specifies the name of an LI IP/IPv6 filter associated with the mirror source defined by tMirrorSourceIndex.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.18.5.151.1.2
tMirrorSourceLiIpFltrParams The value of the object tMirrorSourceLiIpFltrParams specifies the entry ID which identifies a specific entry within the LI IP/IPv6 filter defined by the values of tMirrorSourceLiIpFltrType and tMirrorSourceLiIpFltr. …	TIMETRA-FILTER-MIBTLimitedEntryId Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.18.5.151.1.3
tMirrorSourceLiIpFltrRowStatus The value of the object tMirrorSourceLiIpFltrRowStatus is used for creation and deletion of entries in tMirrorSourceLiIpFltrTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.151.1.4
tMirrorSourceLiIpFltrLastChgd The value of the object tMirrorSourceLiIpFltrLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.151.1.5
tMirrorSourceLiIpFltrIntceptId The value of the object tMirrorSourceLiIpFltrIntceptId specifies the identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	TmnxInterceptionIdentifierr/w Type Constraints: range: 0..1073741823	.1.3.6.1.4.1.6527.3.1.2.18.5.151.1.6
tMirrorSourceLiIpFltrSessionId The value of the object tMirrorSourceLiIpFltrSessionId specifies the identification of the traffic flow corresponding to this conceptual row for the Lawful Intercept Gateway.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.151.1.7

The tMirrorLiDsmSubTable contains mirror source information installed
for Wireless LAN (WLAN) Gateway Dsm Subscribers.
          
Conceptual rows in this table are created and destroyed by SNMP set
operations on the tMirrorLiDsmSubRowStatus object.

tMirrorLiDsmSubEntry row .1.3.6.1.4.1.6527.3.1.2.18.5.152.1

Each conceptual row represents information about a WLAN Gateway dsm
subscriber associated with a mirror source defined in
tMirrorSourceTable.

Indexes

tMirrorSourceIndex tMirrorLiDsmSubMacAddress

Column	Syntax	OID
tMirrorLiDsmSubMacAddress The value of tMirrorLiDsmSubMacAddress specifies the MAC address of the User Equipment whose traffic is intercepted.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.18.5.152.1.1
tMirrorLiDsmSubRowStatus The row status used for creation and deletion of rows in the tMirrorLiDsmSubTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.18.5.152.1.2
tMirrorLiDsmSubLastChanged The value of tMirrorLiDsmSubLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.18.5.152.1.3
tMirrorLiDsmSubInterceptId The value of tMirrorLiDsmSubInterceptId specifies the intercept identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.152.1.4
tMirrorLiDsmSubSessionId The value of tMirrorLiDsmSubSessionId specifies the session identifier.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.18.5.152.1.5