TIMETRA-ETH-TUNNEL-MIB Table View

The tmnxEthTunnelConfigTable consists of the Ethernet Tunnel Group
configuration information.

tmnxEthTunnelConfigEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.1.1

The tmnxEthTunnelConfigEntry contains information pertaining to an
individual Ethernet Tunnel Group.

Rows in this table are created and destroyed using the
tmnxEthTunnelRowStatus object.

A corr…

Indexes

tmnxEthTunnelIndex

Column	Syntax	OID
tmnxEthTunnelIndex The tmnxEthTunnelIndex specifies the row index of the Ethernet Tunnel Group.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6527.3.1.2.64.1.1.1.1
tmnxEthTunnelRowStatus The tmnxEthTunnelRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelConfigTable. A corresponding row in the tmnxPortTable is created by the system when a tmnxEthTunnelRowStatu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.64.1.1.1.2
tmnxEthTunnelTimeStamp The tmnxEthTunnelTimeStamp indicates the time, since system startup, of the last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.64.1.1.1.3
tmnxEthTunnelHoldDownTimeMember The value of tmnxEthTunnelHoldDownTimeMember specifies the time, in centiseconds, used for the hold-timer for associated Continuity Check (CC) Session down event dampening. This guards against reporting excessive member…	centisecondsUnsigned32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.6527.3.1.2.64.1.1.1.4
tmnxEthTunnelProtectionType The value of tmnxEthTunnelProtectionType specifies the model used for determining which members are actively receiving and transmitting data. When the value is set to 'g8031-1to1 (1)', as per G.8031 spec,…	Enumerationr/w Enumerated Values: 1 g8031-1to1 2 loadsharing	.1.3.6.1.4.1.6527.3.1.2.64.1.1.1.5
tmnxEthTunnelRevertTime The value of tmnxEthTunnelRevertTime specifies the time, in seconds, that the tunnel waits to restore the working member. A value of zero (0) sets the behavior of the Ethernet Tunnel Group to be non-rever…	secondsUnsigned32r/w Constraints: range: 0-720	.1.3.6.1.4.1.6527.3.1.2.64.1.1.1.6
tmnxEthTunnelHoldUpTimeMember The value of tmnxEthTunnelHoldUpTimeMember specifies the time, in deciseconds, used for the hold-timer for associated Continuity Check (CC) Session up event dampening. This guards against reporting excessive member ope…	decisecondsUnsigned32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.6527.3.1.2.64.1.1.1.7

The tmnxEthTunnelOperTable consists of the Ethernet Tunnel Group
operational information.
          
This table augments the tmnxEthTunnelConfigTable.

tmnxEthTunnelOperEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.2.1

The tmnxEthTunnelOperEntry contains information pertaining to an
individual Ethernet Tunnel Group's operational state.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxEthTunnelChassisIndex The tmnxEthTunnelChassisIndex indicates the chassis index for the Ethernet Tunnel Group. The tmnxEthTunnelChassisIndex along with the tmnxEthTunnelIfIndex specifies the row in tmnxPortEntry that corresponds to the Ether…	TIMETRA-CHASSIS-MIBTmnxChassisIndex Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.64.1.2.1.1
tmnxEthTunnelIfIndex The tmnxEthTunnelIfIndex indicates the tmnxPortPortID for the Ethernet Tunnel Group. The tmnxEthTunnelChassisIndex along with the tmnxEthTunnelIfIndex specifies the row in tmnxPortEntry that corresponds to the Ethernet…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.64.1.2.1.2
tmnxEthTunnelMgmtMemberIfIndex The tmnxEthTunnelMgmtMemberIfIndex indicates the tmnxEthTunnelMemberIfIndex of the Ethernet Tunnel Group member with which the Ethernet Tunnel Group port (tmnxEthTunnelIfIndex) inherits its port configurations. …	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.64.1.2.1.3
tmnxEthTunnelActiveMembers The tmnxEthTunnelActiveMembers indicates which members are actively receiving and transmitting data for the Ethernet Tunnel Group.	TmnxEthTunnelMemberList Type Values: 0 member1 1 member2 2 member3 3 member4 4 member5 5 member6 6 member7 7 member8 8 member9 9 member10 10 member11 11 member12 12 member13 13 member14 14 member15 15 member16	.1.3.6.1.4.1.6527.3.1.2.64.1.2.1.4
tmnxEthTunnelRevertTimeCountDn The tmnxEthTunnelRevertTimeCountDn indicates the remaining time, in seconds, before the Ethernet Tunnel Group reverts back to the working member. A tmnxEthTunnelRevertTimeCountDn value of '0' indicates th…	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.64.1.2.1.5

The tmnxEthTunnelMemberTable consists of the members associated with
the corresponding tmnxEthTunnelConfigEntry.

tmnxEthTunnelMemberEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.3.1

The tmnxEthTunnelMemberEntry contains information pertaining to an
individual member interface associated with a
tmnxEthTunnelConfigEntry.

Rows in this table are created and destroyed using the
tmnxEthTunne…

Indexes

tmnxEthTunnelIndex tmnxEthTunnelMemberIndex

Column	Syntax	OID
tmnxEthTunnelMemberIndex The tmnxEthTunnelMemberIndex specifies the row index of the member.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.1
tmnxEthTunnelMemberRowStatus The tmnxEthTunnelMemberRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelMemberTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.2
tmnxEthTunnelMemberTimeStamp The value of tmnxEthTunnelMemberTimeStamp indicates the time, since system startup, of the last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.3
tmnxEthTunnelMemberIfIndex The value of tmnxEthTunnelMemberIfIndex specifies the member's port tmnxPortPortID associated with the tmnxEthTunnelConfigEntry. Once specified, the tmnxEthTunnelMemberIfIndex can not be changed; the row …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.4
tmnxEthTunnelMemberIfCtlTag The value of tmnxEthTunnelMemberIfCtlTag specifies the member's encapsulation. Once specified, the tmnxEthTunnelMemberIfCtlTag can not be changed; the row must be destroyed and recreated. T…	TIMETRA-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.5
tmnxEthTunnelMemberDescription The value of tmnxEthTunnelMemberDescription specifies a detailed description of the Ethernet Tunnel member.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.6
tmnxEthTunnelMemberAdminStatus The value of tmnxEthTunnelMemberAdminStatus specifies the administrative state of the member. 'outOfService (3)' specifies that the member will not partake in Tunnel Redundancy or load sharing.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.7
tmnxEthTunnelMemberOperStatus The tmnxEthTunnelMemberOperStatus indicates the operational state of of the member. The tmnxEthTunnelMemberOperStatus supports the following two TmnxOperState values: inService (2) outOfService (3)	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.8
tmnxEthTunnelMemberPrecedence The value of tmnxEthTunnelMemberPrecedence specifies the precedence level of the Member. When tmnxEthTunnelProtectionType of the group is set to 'g8031-1to1 (1)', only two precedence values are valid, and…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6527.3.1.2.64.1.3.1.9

The tmnxEthTunnelApsTable consists of APS configuration for Ethernet
Tunnel Groups configured with a tmnxEthTunnelProtectionType set to
'g8031-1to1 (1)'.

tmnxEthTunnelApsEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1

The tmnxEthTunnelApsEntry contains APS information for an individual
Ethernet Tunnel Group.

Entries in the tmnxEthTunnelApsTable are created and destroyed by the
system by changing the tmnxEthTunnelProtecti…

Indexes

tmnxEthTunnelIndex

Column	Syntax	OID
tmnxEthTunnelApsRxPdu The value of tmnxEthTunnelApsRxPdu indicates the PDU last received on the Ethernet Tunnel Group.	TmnxEthTunnelApsPduType	.1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.1
tmnxEthTunnelApsTxPdu The value of tmnxEthTunnelApsTxPdu indicates the PDU last transmitted on the Ethernet Tunnel Group.	TmnxEthTunnelApsPduType	.1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.2
tmnxEthTunnelApsDefectStatus The value of tmnxEthTunnelApsDefectStatus indicates what defects are active on the Ethernet Tunnel Group. The Defects are defined as: dFopCM -- Configuration Mismatch dFopPM -- Provisionin…	Bits Enumerated Values: 0 dFopCM 1 dFopPM 2 dFopNR	.1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.3
tmnxEthTunnelApsSwitchoverTime The value of tmnxEthTunnelApsSwitchoverTime indicates the time that the Ethernet Tunnel Group last experienced an APS switchover.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.4

The tmnxEthTunnelApsMemberTable consists of Ethernet Tunnel Group
members which are associated with an Ethernet Tunnel Group where the
tmnxEthTunnelProtectionType is set to 'g8031-1to1 (1)'.

tmnxEthTunnelApsMemberEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1

The tmnxEthTunnelApsMemberEntry contains the APS information
pertaining to an Ethernet Tunnel Group member.

Entries in the tmnxEthTunnelApsMemberTable are created and destroyed
by the system, when the Ether…

Indexes

tmnxEthTunnelIndex tmnxEthTunnelMemberIndex

Column	Syntax	OID
tmnxEthTunnelApsMemberActCount The value of tmnxEthTunnelApsMemberActCount indicates the number of times, since system startup, that the Ethernet Tunnel Group member has been active.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1.1
tmnxEthTunnelApsMemberActTime The value of tmnxEthTunnelApsMemberActTime indicates the accumulative time (in seconds) that the Ethernet Tunnel Group member has been active.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1.2

The tmnxEthTunnelApsCommandTable consists of the one-shot action
commands that effect state of Ethernet Tunnel APS configuration.

tmnxEthTunnelApsCommandEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1

The tmnxEthTunnelApsCommandEntry contains the commands available to
exist on an existing Ethernet Tunnel APS Group Member.

Rows in this table are created and destroyed by the system.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxEthTunnelApsCommandSwitch The value of tmnxEthTunnelApsCommandSwitch specifies the switch command to initiate on an Ethernet Tunnel APS Group. When read, this object returns the last command written or 'noCmd (0)' if no command ha…	Enumerationr/w Enumerated Values: 0 noCmd 1 clear 2 lockoutOfSecondary 3 forceSwitchPrimaryToSecondary 4 manualSwitchPrimaryToSecondary 5 exercise	.1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1.1
tmnxEthTunnelApsCommandExsResult The value of tmnxEthTunnelApsCommandExsResult indicates the result of the last 'exercise (5)' command issued from the tmnxEthTunnelApsCommandSwitch object. When this object returns 'unknown (4)' no 'exerc…	Enumeration Enumerated Values: 1 passed 2 failed 3 preempted 4 unknown	.1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1.2

The tmnxEthTunnelLETable consists of the configuration for Ethernet
Tunnel Groups that have tmnxEthTunnelProtectionType set to
'loadsharing (2)'.

tmnxEthTunnelLEEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1

The tmnxEthTunnelLEEntry contains the load sharing information
pertaining to an Ethernet Tunnel Group.

Entries in the tmnxEthTunnelLETable are created or destroyed by
setting the tmnxEthTunnelProtectionType…

Indexes

tmnxEthTunnelIndex

Column	Syntax	OID
tmnxEthTunnelLEAccessAdaptQos The value of tmnxEthTunnelLEAccessAdaptQos specifies how the Ethernet Tunnel Group SAP queue and virtual scheduler buffering and rate parameters are adapted over multiple active MDAs. link (1) - The Ethernet Tun…	Enumerationr/w Enumerated Values: 1 link 2 distribute 3 portFair	.1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.1
tmnxEthTunnelLEPerFpIngQueueing The value of tmnxEthTunnelLEPerFpIngQueueing specifies whether a more efficient method of queue allocation for Ethernet Tunnel Group SAPs should be utilized. An 'inconsistentValue' error is returned if th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.2
tmnxEthTunnelLEMbrThreshold The value of tmnxEthTunnelLEMbrThreshold specifies the threshold for the Ethernet Tunnel Group. When a physical port member state changes and the number of operational physical port members is less than o…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.3

The tmnxEthTunnelSAPMemberTable consists of the configuration for
Ethernet Tunnel Group members associated to SAPs.

tmnxEthTunnelSAPMemberEntry row .1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1

The tmnxEthTunnelSAPMemberEntry contains the SAP information
pertaining to an Ethernet Tunnel Group member.

Entries in the tmnxEthTunnelSAPMemberTable are created and destroyed
by setting the tmnxEthTunnelS…

Indexes

TIMETRA-SERV-MIBsvcId TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue tmnxEthTunnelMemberIndex

Column	Syntax	OID
tmnxEthTunnelSAPMemberRowStatus The tmnxEthTunnelSAPMemberRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelSAPMemberTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1.1
tmnxEthTunnelSAPMemberTagValue The value of tmnxEthTunnelSAPMemberTagValue specifies the members' encapsulation for the SAP. The default value of all ones (0xFFFFFFFF) represents an invalid or unspecified tag.	TIMETRA-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1.2