TIMETRA-ETH-RING-MIB Table View

The tmnxEthRingConfigTable consists of the Ethernet Ring configuration
information.

tmnxEthRingConfigEntry row .1.3.6.1.4.1.6527.3.1.2.72.1.1.1

The tmnxEthRingConfigEntry contains information pertaining to an
individual Ethernet Ring.

Rows in this table are created and destroyed using the
tmnxEthRingRowStatus object.

Indexes

tmnxEthRingIndex

Column	Syntax	OID
tmnxEthRingIndex The value of tmnxEthRingIndex specifies the row index of the Ethernet Ring Group.	Unsigned32 Constraints: range: 1-4294967294	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.1
tmnxEthRingRowStatus The value of tmnxEthRingRowStatus controls the creation and deletion of row entries in the tmnxEthRingConfigTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.2
tmnxEthRingTimeStamp The value of tmnxEthRingTimeStamp indicates the time, since system startup, of the last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.3
tmnxEthRingDescription The value of tmnxEthRingDescription specifies the user supplied description of the Ethernet Ring.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.4
tmnxEthRingAdminState The value of tmnxEthRingAdminState specifies the administrative state of the Ethernet Ring.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.5
tmnxEthRingOperState The value of tmnxEthRingOperState indicates the operational state of the Ethernet Ring.	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.6
tmnxEthRingGuardTime The value of tmnxEthRingGuardTime specifies the guard timer, in deciseconds, of a Ring-APS (R-APS) node. The guard timer is used to prevent the Ethernet Ring node from acting upon outdated R-APS messages …	decisecondsUnsigned32r/w Constraints: range: 1-20	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.7
tmnxEthRingRevertTime The value of tmnxEthRingRevertTime specifies the Wait-To-Restore (WTR) timer, in seconds, of a Ring-APS (R-APS) node. The WTR timer is used to prevent frequent operation of the protection switching due to…	secondsUnsigned32r/w Constraints: range: 0-0 range: 60-720	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.8
tmnxEthRingRevertTimeCountDn The value of tmnxEthRingRevertTimeCountDn indicates the remaining time, in seconds, before the Ethernet Ring can revert to its original state.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.9
tmnxEthRingCcmHoldDownTime The value of tmnxEthRingCcmHoldDownTime specifies the time, in centiseconds, used for the hold-timer for associated Continuity Check (CC) Session down event dampening. This guards against reporting excessive path operat…	centisecondsUnsigned32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.10
tmnxEthRingCcmHoldUpTime The value of tmnxEthRingCcmHoldUpTime specifies the time, in deciseconds, used for the hold-timer for associated Continuity Check (CC) Session up event dampening. This guards against reporting excessive path operational…	decisecondsUnsigned32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.11
tmnxEthRingRplNode The value of tmnxEthRingRplNode specifies the Ring Protection Link (RPL) type of the Ethernet Ring Node.	TmnxEthRingRplNodeTyper/w Type Values: 0 rplNone 1 rplOwner 2 rplNeighbor	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.12
tmnxEthRingNodeId The value of tmnxEthRingNodeId specifies the Ethernet Ring Node ID. The default value is the system's MAC address. Writing the MAC address value 00:00:00:00:00:00 to tmnxEthRingNodeId will …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.13
tmnxEthRingTxApsPdu The value of tmnxEthRingTxApsPdu indicates the contents of the R-APS PDU transmitted on the Ethernet Ring.	TmnxEthRingApsInfoType Type Constraints: range: 0 range: 8..32	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.14
tmnxEthRingDefectStatus The value of tmnxEthRingDefectStatus indicates what defects are active on the Ethernet Ring. The defects are defined as: dFopPM -- Provisioning Mismatch	Bits Enumerated Values: 0 dFopPM	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.15
tmnxEthRingSubRingType The value of tmnxEthRingSubRingType specifies whether this Ethernet Ring is a sub-ring or not. A value of 'none (0)' specifies that the Ethernet Ring is not a sub-ring. A value 'virtualLink (1)' specifies that the Ether…	Enumerationr/w Enumerated Values: 0 none 1 virtualLink 2 nonVirtualLink	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.16
tmnxEthRingSubRingInterconnectId The value of tmnxEthRingSubRingInterconnectId specifies whether the Ethernet sub-ring is interconnected to an Ethernet Ring, as identified by the Ethernet Ring ID, a VPLS service (4294967295), or is not interconnected (…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.17
tmnxEthRingSubRingPropTopChange The value of tmnxEthRingSubRingPropTopChange specifies whether or not the Ethernet sub-ring propagates topology changes to the interconnected ring as specified by the value of tmnxEthRingSubRingInterconnectId. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.18
tmnxEthRingCompatibleVersion The value of tmnxEthRingCompatibleVersion specifies the backward compatibility logic for the Ethernet Ring. If this object is set to 'version1 (1)' then: 1. Attempts at setting tmnxEthRingCommandSwitc…	Enumerationr/w Enumerated Values: 1 version1 2 version2	.1.3.6.1.4.1.6527.3.1.2.72.1.1.1.19

The tmnxEthRingPathTable consists of the paths associated with the
corresponding tmnxEthRingConfigEntry.

tmnxEthRingPathEntry row .1.3.6.1.4.1.6527.3.1.2.72.1.3.1

The tmnxEthRingPathEntry contains information pertaining to an
individual path associated with a tmnxEthRingConfigEntry.

Rows in this table are created and destroyed using the
tmnxEthRingPathRowStatus objec…

Indexes

tmnxEthRingIndex tmnxEthRingPathIndex

Column	Syntax	OID
tmnxEthRingPathIndex The tmnxEthRingPathIndex specifies the row index of the member.	TmnxEthRingPathIndex Type Values: 0 pathA 1 pathB	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.1
tmnxEthRingPathRowStatus The tmnxEthRingPathRowStatus, along with tmnxEthRingPathIfIndex and tmnxEthRingPathIfRapsCcTag, control the creation and deletion of row entries in the tmnxEthRingPathTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.2
tmnxEthRingPathTimeStamp The value of tmnxEthRingPathTimeStamp indicates the time, since system startup, of the last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.3
tmnxEthRingPathIfIndex The value of tmnxEthRingPathIfIndex specifies the member's port tmnxPortPortID associated with the tmnxEthRingConfigEntry. This object must be included in the same SNMP PDU as that of the tmnxEthRingPathR…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.4
tmnxEthRingPathIfRapsCcTag The value of tmnxEthRingPathIfRapsCcTag specifies the member's encapsulation. This object must be included in the same SNMP PDU as that of the tmnxEthRingPathRowStatus object for creation of the path. The…	TIMETRA-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.5
tmnxEthRingPathDescription The value of tmnxEthRingPathDescription specifies a detailed description of the Ethernet Ring path.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.6
tmnxEthRingPathAdminStatus The value of tmnxEthRingPathAdminStatus specifies the administrative state of the path. 'outOfService (3)' specifies that the member will not partake in Ring Redundancy.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.7
tmnxEthRingPathOperStatus The tmnxEthRingPathOperStatus indicates the operational state of of the path. The tmnxEthRingPathOperStatus supports the following two TmnxOperState values: inService (2) outOfService (3)	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.8
tmnxEthRingPathType The value of tmnxEthRingPathType specifies the Ethernet Ring Node Path acts as an rplEnd or in a normal state. This is only configurable if tmnxEthRingRplNode is set to 'rplOwner (1)' or 'rplNeighbor (2)'.	Enumerationr/w Enumerated Values: 0 normal 1 rplEnd	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.9
tmnxEthRingPathFwdState The value of tmnxEthRingPathFwdState indicates whether the Ethernet Ring Node Path blocks the transmission and reception of traffic on the ring port.	Enumeration Enumerated Values: 0 unblocked 1 blocked	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.10
tmnxEthRingPathFwdStateChgTime The value of tmnxEthRingPathFwdStateChgTime indicates the time, since system startup, that the Ethernet Ring Path last experienced a change in the forwarding state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.11
tmnxEthRingPathRxApsPdu The value of tmnxEthRingPathRxApsPdu indicates the contents of the R-APS PDU received on the Ethernet Ring path.	TmnxEthRingApsInfoType Type Constraints: range: 0 range: 8..32	.1.3.6.1.4.1.6527.3.1.2.72.1.3.1.12

The tmnxEthRingSAPPathTable consists of the configuration for Ethernet
Ring Group members associated to SAPs.

tmnxEthRingSAPPathEntry row .1.3.6.1.4.1.6527.3.1.2.72.1.4.1.1

The tmnxEthRingSAPPathEntry contains the SAP information pertaining to
an Ethernet Ring Group member.

Entries in the tmnxEthRingSAPPathTable are created and destroyed by
the system when the TIMETRA-SAP-MIB:…

Indexes

TIMETRA-SERV-MIBsvcId TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue

Column	Syntax	OID
tmnxEthRingSAPPathIndex The value of tmnxEthRingSAPPathIndex indicates the corresponding path index of the tmnxEthRingPathEntry for this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.72.1.4.1.1.1
tmnxEthRingSAPPathControlFlag The value of tmnxEthRingSAPPathControlFlag indicates whether or not this row corresponds to the control SAP of the tmnxEthRingConfigEntry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.72.1.4.1.1.2

The tmnxEthRingCommandTable consists of the one-shot action commands
that effect the state of the Ethernet Ring operation.

tmnxEthRingCommandEntry row .1.3.6.1.4.1.6527.3.1.2.72.1.5.1

The tmnxEthRingCommandEntry contains the commands available to execute
on an existing Ethernet Ring Group Path.

Rows in this table are created and destroyed by the system.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxEthRingCommandSwitch The value of tmnxEthRingCommandSwitch specifies the switch command to initiate on a path of an Ethernet Ring Group. When read, this object returns the last command written or 'noCmd (0)' if no command has…	Enumerationr/w Enumerated Values: 0 noCmd 1 clear 2 forceSwitch 3 manualSwitch	.1.3.6.1.4.1.6527.3.1.2.72.1.5.1.1