TIMETRA-DYNAMIC-SERVICES-MIB Table View

The tmnxDynSvcPlcyTable allows configuration of policies for Dynamic
Services.

tmnxDynSvcPlcyEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.1.1

Each entry represents the configuration for a particular Dynamic
Services profile.

Entries in this table can be created and deleted via SNMP SET
operations to tmnxDynSvcPlcyRowStatus.

Indexes

tmnxDynSvcPlcyName

Column	Syntax	OID
tmnxDynSvcPlcyName The value of tmnxDynSvcPlcyName specifies the identifier name of this Dynamic Services policy.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.84.1.1.1.1
tmnxDynSvcPlcyRowStatus The value of tmnxDynSvcPlcyRowStatus controls the creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.84.1.1.1.2
tmnxDynSvcPlcyLastCh The value of tmnxDynSvcPlcyLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.1.1.3
tmnxDynSvcPlcyDescription The value of tmnxDynSvcPlcyDescription specifies the description of this Dynamic Services policy.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.84.1.1.1.4
tmnxDynSvcPlcyScriptPlcy The value of tmnxDynSvcPlcyScriptPlcy specifies the identifier name of the script policy associated with this Dynamic Services policy. For a non-empty value, a row with the same value for the object tmnxR…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.1.1.5
tmnxDynSvcPlcyCliUser The value of tmnxDynSvcPlcyCliUser specifies the identifier name of the CLI user associated with this Dynamic Services policy. For a non-empty value, a row with the same value for the object tmnxUserName …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.1.1.6
tmnxDynSvcPlcySapLimit The value of tmnxDynSvcPlcySapLimit specifies the limit of the number of SAPs (Service Access Point) that can be created using this Dynamic Services policy. Each SAP counts for a dynamic service instance.…	Unsigned32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.6527.3.1.2.84.1.1.1.7

The tmnxDynSvcPlcyApTable allows configuration of accounting policies
associated with Dynamic Services policies.

tmnxDynSvcPlcyApEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.2.1

Each entry represents the configuration for a particular Dynamic
Services profile.

Two rows in this table are created automatically by the system for
each row in the tmnxDynSvcPlcyTable.

Indexes

tmnxDynSvcPlcyName tmnxDynSvcPlcyApIndex

Column	Syntax	OID
tmnxDynSvcPlcyApIndex The value of tmnxDynSvcPlcyApIndex specifies the identifier number of this row within the scope of a Dynamic Services policy.	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.6527.3.1.2.84.1.2.1.1
tmnxDynSvcPlcyApLastCh The value of tmnxDynSvcPlcyApLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.2.1.2
tmnxDynSvcPlcyApName The value of tmnxDynSvcPlcyApName specifies the identifier name of a RADIUS server policy to be used for accounting. For a non-empty value, a row with the same value for the object tmnxRadSrvPlcyName must…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.2.1.3
tmnxDynSvcPlcyApStatsType The value of tmnxDynSvcPlcyApStatsType specifies what type of statistics are sent to the accounting server.	TmnxDynSrvAcctStatsTyper/w Type Values: 1 volumeTime 2 time	.1.3.6.1.4.1.6527.3.1.2.84.1.2.1.4
tmnxDynSvcPlcyApUpdateInterval The value of tmnxDynSvcPlcyApUpdateInterval specifies the time interval between consecutive accounting updates when using this Dynamic Services policy. The value zero specifies that no intermediate update…	minutesUnsigned32r/w Constraints: range: 0-0 range: 5-259200	.1.3.6.1.4.1.6527.3.1.2.84.1.2.1.5
tmnxDynSvcPlcyApUpdateIvlJitter The value of tmnxDynSvcPlcyApUpdateIvlJitter specifies the amount of jitter to be applied on the update interval which is configured in tmnxDynSvcPlcyApUpdateInterval and can be overruled by RADIUS. A val…	Integer32r/w Constraints: range: -10--10 range: 0-3600	.1.3.6.1.4.1.6527.3.1.2.84.1.2.1.6

The tmnxDynSvcSapTable contains the Service Access Points (SAPs)
created for Dynamic Services.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcSapEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.4.1

Each conceptual row presents information about a particular Dynamic
Services SAP.

Indexes

TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue

Column	Syntax	OID
tmnxDynSvcSapAcctSessionId The value of tmnxDynSvcSapAcctSessionId indicates the identifier used for accounting.	TIMETRA-TC-MIBTmnxSubAcctSessionId Type Constraints: range: 0..22	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.1
tmnxDynSvcSapAcctSessionIdCtrl The value of tmnxDynSvcSapAcctSessionIdCtrl indicates the identifier used for accounting of the Customer Premises Equipment's (CPE) control channel that is associated with this SAP.	TIMETRA-TC-MIBTmnxSubAcctSessionId Type Constraints: range: 0..22	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.2
tmnxDynSvcSapPolicy The value of tmnxDynSvcSapPolicy indicates the Dynamic Services policy associated with this SAP. It refers to a conceptual row in the tmnxDynSvcPlcyTable.	TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.3
tmnxDynSvcSapScriptsExecuted The value of tmnxDynSvcSapScriptsExecuted indicates the number of times a script was executed for this SAP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.4
tmnxDynSvcSapScriptsSuccess The value of tmnxDynSvcSapScriptsSuccess indicates the number of times a script was successfully executed for this SAP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.5
tmnxDynSvcSapLastScriptAction The value of tmnxDynSvcSapLastScriptAction indicates the action of the last script executed for this SAP.	Enumeration Enumerated Values: 1 setup 2 modify 3 teardown 4 commit 5 revert	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.6
tmnxDynSvcSapLastScriptTime The value of tmnxDynSvcSapLastScriptTime indicates the time when the last script executed for this SAP.	OctetString Constraints: range: 11-11	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.7
tmnxDynSvcSapOrphanedobsolete The value of tmnxDynSvcSapOrphaned indicates whether the corresponding SAP was not deleted after running the teardown portion of the script. If set to 'true', the SAP was not deleted, and manual action is…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.8
tmnxDynSvcSapService The value of tmnxDynSvcSapService indicates the parent service of this SAP. The value zero indicates that the parent service is currently unknown.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.9
tmnxDynSvcSapLastScriptParams The value of tmnxDynSvcSapLastScriptParams indicates the parameter string of the script instance that was last executed on this SAP. The value of this object corresponds with the content of the RADIUS ven…	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.6527.3.1.2.84.1.4.1.10

The tmnxDynSvcSapAcctTable contains the Dynamic Services SAP's
accounting information.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcSapAcctEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.5.1

Each conceptual row presents information about an accounting instance
of a particular Dynamic Services SAP.

Indexes

TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue tmnxDynSvcSapAcctIndex

Column	Syntax	OID
tmnxDynSvcSapAcctIndex The value of tmnxDynSvcSapAcctIndex specifies the identifier number of this conceptual row within the scope of a Dynamic Services SAP.	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.6527.3.1.2.84.1.5.1.1
tmnxDynSvcSapAcctAcctStatus The value of tmnxDynSvcSapAcctAcctStatus indicates the operational status of this accounting instance.	TIMETRA-TC-MIBTmnxEnabledDisabled Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.84.1.5.1.2
tmnxDynSvcSapAcctStatsType The value of tmnxDynSvcSapAcctStatsType indicates the actual type of accounting statistics gathered by this accounting instance. It can be specified by the associated Dynamic Services policy (the object t…	TmnxDynSrvAcctStatsType Type Values: 1 volumeTime 2 time	.1.3.6.1.4.1.6527.3.1.2.84.1.5.1.3
tmnxDynSvcSapAcctAcctInterval The value of tmnxDynSvcSapAcctAcctInterval indicates the actual accounting update interval for this accounting instance. It can be specified by the associated Dynamic Services policy (the object tmnxDynSv…	minutesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.5.1.4

The tmnxDynSvcRootObjTable contains information of the Root objects
created by Dynamic Services.
          
A root object is an object created by a Dynamic Service of which the
parent is not created by a Dynamic Service.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcRootObjEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.6.1

Each conceptual row presents information about a Dynamic Services root
object.

Indexes

tmnxDynSvcRootObjIndex

Column	Syntax	OID
tmnxDynSvcRootObjIndex The value of tmnxDynSvcRootObjIndex specifies the index that identifies this conceptual row within the scope of a Dynamic Services Root object.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.6.1.1
tmnxDynSvcRootObjInstance The value of tmnxDynSvcRootObjInstance indicates the concerned root object.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.6527.3.1.2.84.1.6.1.2
tmnxDynSvcRootObjOrphanTime The value of tmnxDynSvcRootObjOrphanTime indicates the sysUpTime when the object was orphaned. When the object is not orphaned or when the time is unknown, the tmnxDynSvcRootObjOrphanTime is set to 0.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.6.1.3
tmnxDynSvcRootObjSnippetName The value of tmnxDynSvcRootObjSnippetName indicates the type-name from the snippet to which the root object belongs. A 'snippet' is the name of a set of python functions to create, modify or destroy confi…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.84.1.6.1.4
tmnxDynSvcRootObjSnippetInstance The value of tmnxDynSvcRootObjSnippetInstance indicates the identifier from the snippet to which the object belongs and is unique within the snippet scope. A 'snippet instance' is an instance of the confi…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.84.1.6.1.5

The tmnxDynSvcStatsTable shows statistics information of the Dynamic
Services.

tmnxDynSvcStatsEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.7.1

Each conceptual row represents a statistic counter.

Entries in this table are created and destroyed by the system.

Rows are only created where the statistics value is nonzero; this
allows faste…

Indexes

tmnxDynSvcStatsId

Column	Syntax	OID
tmnxDynSvcStatsId The value of tmnxDynSvcStatsId specifies the number that identifies this conceptual row within the scope of a Dynamic Services.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.7.1.1
tmnxDynSvcStatsDescr The value of the object tmnxDynSvcStatsDescr indicates the description of the statistic counter contained in this conceptual row.	TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.84.1.7.1.2
tmnxDynSvcStatsVal The value of the object tmnxDynSvcStatsVal indicates the value of the statistics contained in this conceptual row.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.7.1.3

The tmnxDynSvcSnippetTable contains information of the snippets
created by Dynamic Services.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcSnippetEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.8.1

Each conceptual row presents information about a snippet within the
scope of Dynamic Services.

Indexes

tmnxDynSvcSnippetName tmnxDynSvcSnippetInstance

Column	Syntax	OID
tmnxDynSvcSnippetName The value of tmnxDynSvcSnippetName specifies the type-name from the snippet that identifies this conceptual row within the scope of a Dynamic Services. The type-name is used to lookup the set of python fu…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.84.1.8.1.1
tmnxDynSvcSnippetInstance The value of the object tmnxDynSvcSnippetInstance specifies the identifier from the snippet that in combination with the type-name uniquely identifies a snippet. A 'snippet instance' is an instance of the…	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.6527.3.1.2.84.1.8.1.2
tmnxDynSvcSnippetRefCount The value of the object tmnxDynSvcSnippetRefCount indicates the number of times this snippet is referenced by other snippets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.8.1.3
tmnxDynSvcSnippetDictLength The value of the object tmnxDynSvcSnippetDictLength indicates the length of the python dictionary stored for this snippet.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.8.1.4

The tmnxDynSvcSnippetRootObjTable contains information of the root
objects created by a snippet within the scope of a Dynamic Service.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcSnippetRootObjEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.9.1

Each conceptual row presents information about a root object created
by a snippet within the scope of a Dynamic Service.

Indexes

tmnxDynSvcSnippetName tmnxDynSvcSnippetInstance tmnxDynSvcSnippetRootObjIdx

Column	Syntax	OID
tmnxDynSvcSnippetRootObjIdx The value of the object tmnxDynSvcSnippetRootObjIdx specifies the index that identifies this conceptual row within the scope of the snippet.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.9.1.1
tmnxDynSvcSnippetRootObjOid The value of the object tmnxDynSvcSnippetRootObjOid indicates the concerned root object that was created by the snippet.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.6527.3.1.2.84.1.9.1.2

The tmnxDynSvcSnippetRefTable contains information of the referenced
snippets created by a python script within the scope of a Dynamic
Service.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcSnippetRefEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.10.1

Each conceptual row presents information about a referenced snippet
created by a python script within the scope of a Dynamic Service.

Indexes

tmnxDynSvcSnippetName tmnxDynSvcSnippetInstance tmnxDynSvcSnippetRefIdx

Column	Syntax	OID
tmnxDynSvcSnippetRefIdx The value of the object tmnxDynSvcSnippetRefIdx specifies the index that identifies this conceptual row within the scope of the snippet.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.10.1.1
tmnxDynSvcSnippetRefSnipName The value of the object tmnxDynSvcSnippetRefSnipName indicates the type-name from the snippet created or referenced by a python script.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.84.1.10.1.2
tmnxDynSvcSnippetRefSnipInst The value of the object tmnxDynSvcSnippetRefSnipInst indicates the identifier from the snippet created or referenced by a python script.	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.6527.3.1.2.84.1.10.1.3

The tmnxDynSvcSnippetResIdTable contains information of the
identifiers reserved by a python script within the scope of a Dynamic
Service.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcSnippetResIdEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.11.1

Each conceptual row presents information about an identifier reserved
by a python script within the scope of a Dynamic Service.

Indexes

tmnxDynSvcSnippetName tmnxDynSvcSnippetInstance tmnxDynSvcSnippetResIdIdx

Column	Syntax	OID
tmnxDynSvcSnippetResIdIdx The value of the object tmnxDynSvcSnippetResIdIdx specifies the index that identifies this conceptual row within the scope of the snippet.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.11.1.1
tmnxDynSvcSnippetResIdType The value of the object tmnxDynSvcSnippetResIdType indicates the type-name from the identifier reserved by a python script.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.84.1.11.1.2
tmnxDynSvcSnippetResIdValue The value of the object tmnxDynSvcSnippetResIdValue indicates the value from the identifier reserved by a python script.	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.6527.3.1.2.84.1.11.1.3

The tmnxDynSvcPlcyAuthTable allows configuration of authentication
parameters associated with Dynamic Services policies.

tmnxDynSvcPlcyAuthEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.13.1

Each entry represents the configuration for a particular Dynamic
Services profile.

An entry in this table is automatically created by the system for each
row in the tmnxDynSvcPlcyTable.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxDynSvcPlcyAuthLastCh The value of tmnxDynSvcPlcyAuthLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.13.1.1
tmnxDynSvcPlcyAuthRadiusSrvPlcy The value of tmnxDynSvcPlcyAuthRadiusSrvPlcy specifies the RADIUS server policy to be used for authentication. For a non-empty value, a row with the same value for the object tmnxRadSrvPlcyName must exist…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.13.1.2
tmnxDynSvcPlcyAuthPassword The value of tmnxDynSvcPlcyAuthPassword specifies the password for going to the RADIUS server. An empty string is returned on SNMP GET requests.	TIMETRA-TC-MIBTmnxAuthPasswordr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.6527.3.1.2.84.1.13.1.3
tmnxDynSvcPlcyAuthLocalDb The value of tmnxDynSvcPlcyAuthLocalDb specifies the local database to be used for authentication. For a non-empty value, a row with the same value for the object tmnxDynSvcLocAuthDbName must exist in the…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.13.1.4

A table that contains Dynamic Services configuration for capture SAPs.
It allows to dynamically create dynamic SAPs based on incoming data
packets.
          
A row is automatically created in the tmnxDynSvcCaptureSapTable for an
entry in the sapBaseInfoTable where the value of the object sapSubType
is equal to 'capture' and the SAP's encapsulation allows creation of
dynamic SAPs.

tmnxDynSvcCaptureSapEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.14.1

Dynamic Services specific configuration for a capture SAP.

Indexes

TIMETRA-SERV-MIBsvcId TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue

Column	Syntax	OID
tmnxDynSvcCaptureSapLastCh The value of tmnxDynSvcCaptureSapLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.14.1.1
tmnxDynSvcCaptureSapAdminState The value of tmnxDynSvcCaptureSapAdminState specifies the administrative state of this capture SAP. If the value of this field is set 'inService', data packets coming in on this capture SAP will get authe…	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.84.1.14.1.2
tmnxDynSvcCaptureSapPolicy The value of tmnxDynSvcCaptureSapPolicy specifies the Dynamic Services policy associated with this capture SAP. Its use is twofold: - define the parameters to authenticate the incoming data packet - used as default Dyna…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.14.1.3

The tmnxDynSvcCaptureSapStatsTable contains statistics about the
capture SAPs of this system.

tmnxDynSvcCaptureSapStatsEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.15.1

Each conceptual row represents statistics about a particular capture
SAP.

Rows are created and destroyed automatically by the system.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxDynSvcCSapStatsRxPackets The value of tmnxDynSvcCSapStatsRxPackets indicates the total number of data packets received by this capture SAP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.15.1.1

The tmnxDynSvcCaptureSapDropTable contains data-trigger related drop
statistics about the capture SAPs of this system.

tmnxDynSvcCaptureSapDropEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.16.1

Each conceptual row represents information about a specific drop
reason.

Rows are created and destroyed automatically by the system.

Indexes

TIMETRA-SERV-MIBsvcId TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue tmnxDynSvcCSapDropIndex

Column	Syntax	OID
tmnxDynSvcCSapDropIndex The value of tmnxDynSvcCSapDropIndex specifies the index of this row.	Unsigned32 Constraints: range: 1-9	.1.3.6.1.4.1.6527.3.1.2.84.1.16.1.1
tmnxDynSvcCSapDropReason The value of tmnxDynSvcCSapDropReason indicates a descriptive reason explaining the cause of drop.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.6527.3.1.2.84.1.16.1.2
tmnxDynSvcCSapDropCounter The value of tmnxDynSvcCSapDropCounter indicates the amount of data-triggers dropped corresponding to this row.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.84.1.16.1.3

The tmnxDynSvcDataTriggerTable contains the Data Triggers created for
Dynamic Services.
          
Conceptual rows in this table are created and destroyed automatically
by the system.

tmnxDynSvcDataTriggerEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.17.1

Each conceptual row presents information about a particular Data
Trigger.

Indexes

TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue

Column	Syntax	OID
tmnxDynSvcDTriggerAcctSessionId The value of tmnxDynSvcDTriggerAcctSessionId indicates the identifier used for accounting.	TIMETRA-TC-MIBTmnxSubAcctSessionId Type Constraints: range: 0..22	.1.3.6.1.4.1.6527.3.1.2.84.1.17.1.1
tmnxDynSvcDTriggerMacAddress The value of tmnxDynSvcDTriggerMacAddress indicates the MAC address of the incoming data packet triggering the creation of this row.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.84.1.17.1.2
tmnxDynSvcDTriggerIpAddressType The value of tmnxDynSvcDTriggerIpAddressType indicates the type of address stored in tmnxDynSvcDTriggerIpAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.84.1.17.1.3
tmnxDynSvcDTriggerIpAddress The value of tmnxDynSvcDTriggerIpAddress indicates the IP address of the incoming data packet triggering the creation of this row. If this row was created by a non-IP packet, the value of tmnxDynSvcDTriggerIpAddressType…	OctetString Constraints: range: 4-4 range: 16-16 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.84.1.17.1.4
tmnxDynSvcDTriggerState The value of tmnxDynSvcDTriggerState indicates the current state of the Data Trigger corresponding to this row: - 'pending' : authentication is going on - 'accepted' : authentication has been finished and was success…	Enumeration Enumerated Values: 1 pending 2 accepted 3 sapCreated	.1.3.6.1.4.1.6527.3.1.2.84.1.17.1.5

The tmnxDynSvcLocalAuthDbTable allows configuration of local
authentication databases for data-triggered Dynamic Services.

tmnxDynSvcLocalAuthDbEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.18.1

Each entry represents the configuration for a particular database.

Entries in this table can be created and deleted via SNMP SET
operations to tmnxDynSvcLocAuthDbRowStatus.

Indexes

tmnxDynSvcLocAuthDbName

Column	Syntax	OID
tmnxDynSvcLocAuthDbName The value of tmnxDynSvcLocAuthDbName specifies the identifier name of this database.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.84.1.18.1.1
tmnxDynSvcLocAuthDbRowStatus The value of tmnxDynSvcLocAuthDbRowStatus controls the creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.84.1.18.1.2
tmnxDynSvcLocAuthDbLastCh The value of tmnxDynSvcLocAuthDbLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.18.1.3
tmnxDynSvcLocAuthDbAdminState The value of tmnxDynSvcLocAuthDbAdminState specifies the administrative state of this database.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.84.1.18.1.4
tmnxDynSvcLocAuthDbDescription The value of tmnxDynSvcLocAuthDbDescription specifies the description of this database.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.84.1.18.1.5

The tmnxDynSvcLocalAuthDbUserTable allows configuration of user
entries in the local authentication databases defined in the
tmnxDynSvcLocalAuthDbTable.

tmnxDynSvcLocalAuthDbUserEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.19.1

Each entry represents the configuration for a particular user entry.

Entries in this table can be created and deleted via SNMP SET
operations to tmnxDynSvcLocADbUsrRowStatus.

Indexes

tmnxDynSvcLocAuthDbName tmnxDynSvcLocADbUsrName

Column	Syntax	OID
tmnxDynSvcLocADbUsrName The value of tmnxDynSvcLocADbUsrName specifies the user-name of this entry.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.6527.3.1.2.84.1.19.1.1
tmnxDynSvcLocADbUsrRowStatus The value of tmnxDynSvcLocADbUsrRowStatus controls the creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.84.1.19.1.2
tmnxDynSvcLocADbUsrLastCh The value of tmnxDynSvcLocADbUsrLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.19.1.3
tmnxDynSvcLocADbUsrAdminState The value of tmnxDynSvcLocADbUsrAdminState specifies the administrative state of this user entry.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.84.1.19.1.4
tmnxDynSvcLocADbUsrDescription The value of tmnxDynSvcLocADbUsrDescription specifies the description of this user entry.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.84.1.19.1.5

The tmnxDynSvcLocalAuthDbSapTable allows configuration of per-user SAP
entries in the local authentication databases defined in the
tmnxDynSvcLocalAuthDbUserTable.

tmnxDynSvcLocalAuthDbSapEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.20.1

Each entry represents the configuration for a particular per-user SAP
entry.

Entries in this table can be created and deleted via SNMP SET
operations to tmnxDynSvcLocADbSapRowStatus.

Indexes

tmnxDynSvcLocAuthDbName tmnxDynSvcLocADbUsrName tmnxDynSvcLocADbSapIndex

Column	Syntax	OID
tmnxDynSvcLocADbSapIndex The value of tmnxDynSvcLocADbSapIndex specifies the index of this entry.	Unsigned32 Constraints: range: 1-32	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.1
tmnxDynSvcLocADbSapRowStatus The value of tmnxDynSvcLocADbSapRowStatus controls the creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.2
tmnxDynSvcLocADbSapLastCh The value of tmnxDynSvcLocADbSapLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.3
tmnxDynSvcLocADbSapSapId The value of tmnxDynSvcLocADbSapSapId specifies the SAP identifier of this SAP entry.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.4
tmnxDynSvcLocADbSapPolicy The value of tmnxDynSvcLocADbSapPolicy specifies the Dynamic Services policy of this SAP entry.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.5
tmnxDynSvcLocADbSapScriptParams1 The value of tmnxDynSvcLocADbSapScriptParams1 specifies the Python script parameters of this SAP entry.	OctetStringr/w Constraints: range: 0-250	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.6
tmnxDynSvcLocADbSapScriptParams2 The value of tmnxDynSvcLocADbSapScriptParams2 specifies the Python script parameters of this SAP entry.	OctetStringr/w Constraints: range: 0-250	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.7
tmnxDynSvcLocADbSapScriptParams3 The value of tmnxDynSvcLocADbSapScriptParams3 specifies the Python script parameters of this SAP entry.	OctetStringr/w Constraints: range: 0-250	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.8
tmnxDynSvcLocADbSapScriptParams4 The value of tmnxDynSvcLocADbSapScriptParams4 specifies the Python script parameters of this SAP entry.	OctetStringr/w Constraints: range: 0-250	.1.3.6.1.4.1.6527.3.1.2.84.1.20.1.9

The tmnxDynSvcLocalAuthDbAcctTable allows accounting configuration of
per-user SAP entries in the local authentication databases defined in
the tmnxDynSvcLocalAuthDbSapTable.

tmnxDynSvcLocalAuthDbAcctEntry row .1.3.6.1.4.1.6527.3.1.2.84.1.21.1

Each entry represents the configuration for a particular accounting
instance.

Entries in this table can be created and deleted via SNMP SET
operations to tmnxDynSvcLocADbAcctRowStatus.

Indexes

tmnxDynSvcLocAuthDbName tmnxDynSvcLocADbUsrName tmnxDynSvcLocADbSapIndex tmnxDynSvcLocADbAcctIndex

Column	Syntax	OID
tmnxDynSvcLocADbAcctIndex The value of tmnxDynSvcLocADbAcctIndex specifies the accounting instance.	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.6527.3.1.2.84.1.21.1.1
tmnxDynSvcLocADbAcctRowStatus The value of tmnxDynSvcLocADbAcctRowStatus controls the creation and deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.84.1.21.1.2
tmnxDynSvcLocADbAcctLastCh The value of tmnxDynSvcLocADbAcctLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.84.1.21.1.3
tmnxDynSvcLocADbAcctStatsType The value of tmnxDynSvcLocADbAcctStatsType specifies the type of statistics.	Enumerationr/w Enumerated Values: 1 off 2 volumeTime 3 time	.1.3.6.1.4.1.6527.3.1.2.84.1.21.1.4
tmnxDynSvcLocADbAcctUpdateIvl The value of tmnxDynSvcLocADbAcctUpdateIvl specifies the time interval between consecutive accounting updates. The value zero specifies that no intermediate updates be sent.	minutesUnsigned32r/w Constraints: range: 0-0 range: 5-259200	.1.3.6.1.4.1.6527.3.1.2.84.1.21.1.5