TELESTE-COMMON-MIB Table View

A table of manager trap receiver addresses, ports and
communities. Total number of entries can not exceed 
elementNumberTrapReceivers. An entry is deleted from this
table by setting its IP address to '0.0.0.0'.
          
Note: one of the community strings must match to 
commonTrapCommunityString in SCTE-HMS-COMMON-MIB, if 
that is implemented.

controlTrapReceiverEntry row .1.3.6.1.4.1.3715.99.1.3.5.1

Indexes

receiverEntryId

Column	Syntax	OID
receiverEntryIdmandatory Unique table index. Makes possible to have several ip-address of 0.0.0.0 entries so that no mechanism for row manipulation of table is needed.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.3715.99.1.3.5.1.1
receiverAddressmandatory Ip address of the manager receiving Traps.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.3715.99.1.3.5.1.2
receiverPortmandatory Trap UDP port number. Default port is the standard trap port 162.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3715.99.1.3.5.1.3
receiverCommunitymandatory Community string for the trap receiver. The agent is allowed to limit the length of the string. Minimum length of eight characters must be supported. Note: one of the community strings mus…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.1.3.5.1.4

This table lists basic module identification and 
configuration data of modules installed inside 
the managed element.
          
The first row in the table list information about the
element itself. If the element is not modular, only the 
first row exists in the table.
          
Object moduleId is used for indexing the modules
in all module section tables.

moduleEntry row .1.3.6.1.4.1.3715.99.2.1.1.1

Indexes

moduleId

Column	Syntax	OID
moduleIdmandatory An unique module index identifying the (physical) modules inside the network element. The exact conjunction between the index and the physical modules depends on the element structural principle. For netw…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.3715.99.2.1.1.1.1
moduleNameoptional The identification name ('aliasname') of the module.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.2.1.1.1.2
moduleHwTypemandatory The hardware type name of the module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.3715.99.2.1.1.1.3
moduleRackNooptional Rack number of the module. This can be used to identify the physical position of the module in the case where the agent manages modules that are in several racks.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.1.1.1.4
moduleSlotNooptional Slot number of the module (within rack).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.1.1.1.5

This table lists detailed module data of modules installed
inside the element.
          
The first row in the table list information about the 
element itself. If the element is not modular, only the 
first row exists in the table.

moduleDetailEntry row .1.3.6.1.4.1.3715.99.2.1.2.1

Indexes

moduleId

Column	Syntax	OID
moduleMacAddressoptional Module MAC address. If the MAC address is unknown '00.00.00.00.00.00' is returned.	TELESTE-ROOT-MIBTPhysAddress Type Constraints: range: 6	.1.3.6.1.4.1.3715.99.2.1.2.1.1
moduleBusAddressoptional Module bus address.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.1.2.1.2
moduleAppDatemandatory Module application software date.	TELESTE-ROOT-MIBDateAndTime Type Constraints: range: 16..28	.1.3.6.1.4.1.3715.99.2.1.2.1.3
moduleAppVersionmandatory Module application software version. If software version is undefined, then zero length string is returned.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.3715.99.2.1.2.1.4
moduleBiosDatemandatory Module BIOS date.	TELESTE-ROOT-MIBDateAndTime Type Constraints: range: 16..28	.1.3.6.1.4.1.3715.99.2.1.2.1.5
moduleBiosVersionmandatory Module BIOS version. If bios version is undefined, a zero length string is returned.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.3715.99.2.1.2.1.6
moduleHwSerialNumbermandatory Module serial number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.3715.99.2.1.2.1.7
moduleHwVersionmandatory Module hardware version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.3715.99.2.1.2.1.8

This table contains status objects for modules inside
the network element.The first row in the table lists 
information about the host module. If the element is 
not modular, only the first row exists in the table.

moduleStatusEntry row .1.3.6.1.4.1.3715.99.2.2.1.1

Row in moduleStatusTable. The index is moduleId from
the moduleTable. Row in this table exist only if
there is a row with the same moduleId in the moduleTable.

Indexes

moduleId

Column	Syntax	OID
statusResetCausemandatory Reason for the last reset. If the reason is unknown, the value is reasonUnknown(1). If the device makes self reset and it can detect it, then value is reasonSelfReset(2). If the reset was made by the use…	Enumeration Enumerated Values: 1 unknown 2 selfReset 3 powerReset 4 commandedReset 5 softdownloadReset	.1.3.6.1.4.1.3715.99.2.2.1.1.1
statusRunningSwImagemandatory Currently running software image number. Bios is 0, applications are numbered from 1..n, where n is the maximum image number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.2.1.1.2
statusInternalTemperaturemandatory Device temperature, unit 0.1 deg C. Value is zero (0), if temperature is not available.	Integer32 Constraints: range: -600-1300	.1.3.6.1.4.1.3715.99.2.2.1.1.3
statusLidStatusoptional Current lid status detected by the device. May or may not be the same variable as the elementLidStatus.	Enumeration Enumerated Values: 1 noLid 2 closed 3 open	.1.3.6.1.4.1.3715.99.2.2.1.1.4
statusRestartCounteroptional This objects counts the number of restarts of the module. A start can be a cold start or a warm start.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3715.99.2.2.1.1.5

This table contains common control commands for all the
modules inside the element.

moduleControlEntry row .1.3.6.1.4.1.3715.99.2.3.1.1

Indexes

moduleId

Column	Syntax	OID
controlLedUsageoptional A variable to instruct how device LED's behave when the lid is closed.	Enumerationr/w Enumerated Values: 1 notSupported 2 alwaysOn 3 offWhenLidClosed	.1.3.6.1.4.1.3715.99.2.3.1.1.1
controlMarkStateoptional A variable to instruct the device to start and stop showing mark (blinking module LED). On read requests returns the current mark state.	Enumerationr/w Enumerated Values: 1 notSupported 2 on 3 off	.1.3.6.1.4.1.3715.99.2.3.1.1.2
controlResetoptional On write requests this object commands the module to reset itself. If softReset(3) or hardReset(2) can not be performed, then BAD VALUE error is returned. On read requests value noReset(1)…	Enumerationr/w Enumerated Values: 1 noReset 2 hardReset 3 softReset	.1.3.6.1.4.1.3715.99.2.3.1.1.3
controlTempLimitHiHioptional Module temperature HiHi (high alarm) limit in 0.1 degC.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.3.1.1.4
controlTempLimitHioptional Module temperature Hi (high warning) limit in 0.1 degC.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.3.1.1.5
controlTempLimitLooptional Module temperature Lo (low warning) limit in 0.1 degC.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.3.1.1.7
controlTempLimitLoLooptional Module temperature LoLo (low alarm) limit in 0.1 degC.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.3.1.1.8
controlTempDeadBandoptional Module temperature alarm/warning deadband in 0.1 degC. Common to all limit values (LoLo, Lo, Hi, HiHi). The deadband defines the difference between the 'ON' limit and the 'OFF' limit of the corresponding alarm. …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.3.1.1.9
controlInternalAppAccessoptional This object defines whether the internal controller application is able to access the module parameters. This corresponds to the BXX module setting 'Allow Functions'. 1 = allow internal control 2 = deny internal control…	Enumerationr/w Enumerated Values: 1 allowIntControl 2 denyIntControl	.1.3.6.1.4.1.3715.99.2.3.1.1.10
controlLocalAccessoptional This object defines whether the local user interface (buttons, knobs etc.) is enabled or disabled. Values: 1 = disabled, local UI is locked 2 = enabled, local UI is active For modules/devices with no local UI this objec…	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.3715.99.2.3.1.1.11

A table of software update control objects.

moduleSWUpdateEntry row .1.3.6.1.4.1.3715.99.2.3.2.1

Indexes

moduleId

Column	Syntax	OID
sWUpdateControloptional Writing value updateStart(4) commands the module to run a software update. The software image location and file name are specified in sWUpdateURL and sWUpdateFilename. Writing a updateIdle(1) when the …	Enumerationr/w Enumerated Values: 1 updateIdle 2 updateRunning 3 updateFailed 4 updateStart	.1.3.6.1.4.1.3715.99.2.3.2.1.1
swUpdateURLoptional The URL where the software image can be downloaded. Format e.g. TFTP:\\downloads\swupdate\.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.2.3.2.1.2
sWUpdateFileNameoptional File name of the software image file to be downloaded.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.2.3.2.1.3
sWUpdateStatusoptional Description of the software update result. After successful update this object should return a string 'Software updated successfully on <date and time>'. If the update failed the returned value should b…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.3715.99.2.3.2.1.4

This table defines maximum number of entries 
in the registry tables. All the registry tables have
fixed size defined in this table.

moduleSizeOfEntry row .1.3.6.1.4.1.3715.99.2.4.1.1

Indexes

moduleId

Column	Syntax	OID
sizeOfRegistrymandatory Max number of entries in the registryTable. The entries in the registryTable are numbered from 1..sizeofRegistry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.4.1.1.1
sizeOfRepairlogoptional Max number of entries in the repairlogTable. First entry (oldest entry) is deleted, when a new entry is added and the table is full.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.4.1.1.2
sizeOfNotebookoptional Max number of entries in the notebookTable. The lines in the notebookTable are numbered from 1..sizeofNotebook.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3715.99.2.4.1.1.3

This table lists user data for all modules 
installed inside the element.
          
Table is indexed by the moduleId and regIndex.
regIndex can have values 1..sizeofRegistry.
          
A registryEntry is 'deleted' by setting its name
to an empty string.

moduleRegistryEntry row .1.3.6.1.4.1.3715.99.2.4.2.1

Indexes

moduleId regIndex

Column	Syntax	OID
regIndexoptional A second index to registryTable. Can have values 1..sizeofRegistryTable.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.3715.99.2.4.2.1.1
regNameoptional Descriptive name for the parameter. The agent is allowed to limit the length of the name. Minimum length of eight characters must be supported. Writing empty string to this object removes…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.2.4.2.1.2
regValueoptional Textual information describing the parameter information. The agent is allowed to limit the length of the name. Minimum length of eight characters must be supported.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.2.4.2.1.3

This table contains repair history entries for modules
in the element. The table is indexed with moduleId and 
repairLogDate.
          
The table can have sizeofRepairlog number of entries. 
If this number is exceeded when writing a new entry, 
the oldest entry is deleted and and a new entry is added.

moduleRepairLogEntry row .1.3.6.1.4.1.3715.99.2.4.3.1

Row entry in RepairLogTable.

Note that it uses double index: moduleId repairIndex.
that uniquely identify each log entry. Rows for particular
module exist only if there is row, that represents this
module…

Indexes

moduleId repairIndex

Column	Syntax	OID
repairIndexoptional Row number of the Repairlog entry. Can have values between 1..sizeOfRepairlog. This field is a second index to moduleRepairLogTable.	Integer32 Constraints: range: 1-32767	.1.3.6.1.4.1.3715.99.2.4.3.1.1
repairDateoptional Date of this repair entry formatted as CCYY-MM-DD.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.2.4.3.1.2
repairReasonCodeoptional Repair code for this entry.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.3715.99.2.4.3.1.3
repairNameCodeoptional Repairer name code (initials) for this entry.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.3715.99.2.4.3.1.4
repairCommentoptional Comment of the repair event. The agent is allowed to truncate the length of the comment, if it is too long to internal storage.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3715.99.2.4.3.1.5

Notebook is a free text area for manager or serviceman 
notes. It is divided into 50 character long character
blocks or lines. Each line is an entry in the 
notebookTable.
          
Indices are moduleName and lineNumber.
          
A new line with the same lineNumber overwrites 
the old line.

moduleNotebookEntry row .1.3.6.1.4.1.3715.99.2.4.4.1

Indexes

moduleId notebookLineNumber

Column	Syntax	OID
notebookLineNumberoptional The line number of the notebookTextLine. The number must be in between 1..sizeofNotebook. inclusive. Numbers should be used consecutively.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.3715.99.2.4.4.1.1
notebookLineTextoptional Text field for storing notes about the module.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.3715.99.2.4.4.1.2