Standard view Table view

TED-MIB

        This MIB module contains managed object definitions for TED in
support of MPLS/GMPLS TE Database.
        
Copyright (c) 2013 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or without
modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in
Section 4.c of the IETF Trust's Legal Provisions Relating to IETF
Documents (http://trustee.ietf.org/license-info).
Source file
TED-MIB
Last revised
Identity
tedMIB
Base OID
1.3.6.1.2.1.10.273
Imported Objects
FLOAT-TC-MIB Float32TC
IANA-GMPLS-TC-MIB IANAGmplsLSPEncodingTypeTC IANAGmplsSwitchingTypeTC
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32
SNMPv2-TC RowPointer TEXTUAL-CONVENTION
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'TED-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TED-MIB::tedMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TED-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TED-MIB::tedMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (65)
tedMIB
.1.3.6.1.2.1.10.273
tedNotifications
.1.3.6.1.2.1.10.273.0
tedObjects
.1.3.6.1.2.1.10.273.1
tedTable
.1.3.6.1.2.1.10.273.1.1
tedEntry
tedLocalRouterIdtedRemoteRouterIdtedLinkInformationSourcetedLinkIndex
 .1.3.6.1.2.1.10.273.1.1.1
tedLinkInformationSource
Enumeration
 .1.3.6.1.2.1.10.273.1.1.1.1
tedTeRouterIdAddr
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.2.1.10.273.1.1.1.10
tedLinkIdAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.2.1.10.273.1.1.1.11
tedLinkIdAddr
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.2.1.10.273.1.1.1.12
tedMetric
SNMPv2-SMIInteger32
 .1.3.6.1.2.1.10.273.1.1.1.13
tedMaxBandwidth
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.14
tedMaxReservableBandwidth
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.15
tedUnreservedBandwidthPri0
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.16
tedUnreservedBandwidthPri1
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.17
tedUnreservedBandwidthPri2
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.18
tedUnreservedBandwidthPri3
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.19
tedLocalRouterId
TedRouterIdTC
 .1.3.6.1.2.1.10.273.1.1.1.2
tedUnreservedBandwidthPri4
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.20
tedUnreservedBandwidthPri5
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.21
tedUnreservedBandwidthPri6
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.22
tedUnreservedBandwidthPri7
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.1.1.23
tedAdministrativeGroup
SNMPv2-SMIInteger32
 .1.3.6.1.2.1.10.273.1.1.1.24
tedLocalId
SNMPv2-SMIInteger32
 .1.3.6.1.2.1.10.273.1.1.1.25
tedRemoteId
SNMPv2-SMIInteger32
 .1.3.6.1.2.1.10.273.1.1.1.26
tedLinkProtectionType
Bits
 .1.3.6.1.2.1.10.273.1.1.1.27
tedRemoteRouterId
TedRouterIdTC
 .1.3.6.1.2.1.10.273.1.1.1.3
tedLinkIndex
TedLinkIndexTC
 .1.3.6.1.2.1.10.273.1.1.1.4
tedLinkInformationData
SNMPv2-TCRowPointer
 .1.3.6.1.2.1.10.273.1.1.1.5
tedLinkState
Enumeration
 .1.3.6.1.2.1.10.273.1.1.1.6
tedAreaId
TedAreaIdTC
 .1.3.6.1.2.1.10.273.1.1.1.7
tedLinkType
Enumeration
 .1.3.6.1.2.1.10.273.1.1.1.8
tedTeRouterIdAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.2.1.10.273.1.1.1.9
tedLocalIfAddrTable
.1.3.6.1.2.1.10.273.1.2
tedLocalIfAddrEntry
tedLinkIndextedLocalIfAddr
 .1.3.6.1.2.1.10.273.1.2.1
tedLocalIfAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.2.1.10.273.1.2.1.1
tedLocalIfAddr
OctetString
 .1.3.6.1.2.1.10.273.1.2.1.2
tedRemoteIfAddrTable
.1.3.6.1.2.1.10.273.1.3
tedRemoteIfAddrEntry
tedLinkIndextedRemoteIfAddr
 .1.3.6.1.2.1.10.273.1.3.1
tedRemoteIfAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.2.1.10.273.1.3.1.1
tedRemoteIfAddr
OctetString
 .1.3.6.1.2.1.10.273.1.3.1.2
tedSwCapTable
.1.3.6.1.2.1.10.273.1.4
tedSwCapEntry
tedLinkIndextedSwCapIndex
 .1.3.6.1.2.1.10.273.1.4.1
tedSwCapIndex
Unsigned32
 .1.3.6.1.2.1.10.273.1.4.1.1
tedSwCapMaxLspBandwidthPri6
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.10
tedSwCapMaxLspBandwidthPri7
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.11
tedSwCapMinLspBandwidth
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.12
tedSwCapIfMtu
SNMPv2-SMIInteger32
 .1.3.6.1.2.1.10.273.1.4.1.13
tedSwCapIndication
Enumeration
 .1.3.6.1.2.1.10.273.1.4.1.14
tedSwCapType
IANA-GMPLS-TC-MIBIANAGmplsSwitchingTypeTC
 .1.3.6.1.2.1.10.273.1.4.1.2
tedSwCapEncoding
IANA-GMPLS-TC-MIBIANAGmplsLSPEncodingTypeTC
 .1.3.6.1.2.1.10.273.1.4.1.3
tedSwCapMaxLspBandwidthPri0
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.4
tedSwCapMaxLspBandwidthPri1
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.5
tedSwCapMaxLspBandwidthPri2
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.6
tedSwCapMaxLspBandwidthPri3
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.7
tedSwCapMaxLspBandwidthPri4
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.8
tedSwCapMaxLspBandwidthPri5
Byte per secondFLOAT-TC-MIBFloat32TC
 .1.3.6.1.2.1.10.273.1.4.1.9
tedSrlgTable
.1.3.6.1.2.1.10.273.1.5
tedSrlgEntry
tedLinkIndextedSrlgIndex
 .1.3.6.1.2.1.10.273.1.5.1
tedSrlgIndex
Unsigned32
 .1.3.6.1.2.1.10.273.1.5.1.1
tedSrlg
SNMPv2-SMIInteger32
 .1.3.6.1.2.1.10.273.1.5.1.2
tedStatusChangeNotificationMaxRate r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.10.273.1.6
tedCreatedDeletedNotificationMaxRate r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.10.273.1.7
tedConformance
.1.3.6.1.2.1.10.273.2
tedCompliances
.1.3.6.1.2.1.10.273.2.1
tedGroups
.1.3.6.1.2.1.10.273.2.2
Dependencies (6) 6 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. FLOAT-TC-MIBrfc
  4. IANA-GMPLS-TC-MIBrfc
  5. INET-ADDRESS-MIBrfc
  6. SNMPv2-CONFrfc
  7. TED-MIBrfcselected
Type Definitions (3)
TedAreaIdTC
OctetString range: 0..20
TedLinkIndexTC
OctetString range: 0..8
TedRouterIdTC
OctetString range: 0..6
Conformance Groups (10)
tedMainGroup
tedLinkState tedAreaId tedLinkType tedTeRouterIdAddrType tedTeRouterIdAddr tedLinkIdAddrType tedLinkIdAddr tedMetric tedMaxBandwidth tedMaxReservableBandwidth tedUnreservedBandwidthPri0 tedUnreservedBandwidthPri1 tedUnreservedBandwidthPri2 tedUnreservedBandwidthPri3 tedUnreservedBandwidthPri4 tedUnreservedBandwidthPri5 tedUnreservedBandwidthPri6 tedUnreservedBandwidthPri7 tedAdministrativeGroup tedLinkProtectionType tedLinkInformationData
Collection of objects for TED management
 .1.3.6.1.2.1.10.273.2.2.1
tedObjectsGroup
tedStatusChangeNotificationMaxRate tedCreatedDeletedNotificationMaxRate
The objects needed to implement notification.
 .1.3.6.1.2.1.10.273.2.2.2
tedNotificationGroup
tedStatusChange tedEntryCreated tedEntryDeleted
This group is mandatory for those implementations that can
implement the notifications contained in this group.
 .1.3.6.1.2.1.10.273.2.2.3
tedUnnumberedLinkGroup
tedLocalId tedRemoteId
The objects needed to implement the unnumbered links.
 .1.3.6.1.2.1.10.273.2.2.4
tedNumberedLinkGroup
tedLocalIfAddrType tedRemoteIfAddrType
The objects needed to implement the numbered links.
 .1.3.6.1.2.1.10.273.2.2.5
tedSwCapGroup
tedSwCapType tedSwCapEncoding tedSwCapMaxLspBandwidthPri0 tedSwCapMaxLspBandwidthPri1 tedSwCapMaxLspBandwidthPri2 tedSwCapMaxLspBandwidthPri3 tedSwCapMaxLspBandwidthPri4 tedSwCapMaxLspBandwidthPri5 tedSwCapMaxLspBandwidthPri6 tedSwCapMaxLspBandwidthPri7
The objects needed to implement the TE links with GMPLS TE
switching capability information.
 .1.3.6.1.2.1.10.273.2.2.6
tedSwCapMinLspBandwidthGroup
tedSwCapMinLspBandwidth
The objects needed to implement the minimum bandwidth of the
TE link for GMPLS LSP creation.
 .1.3.6.1.2.1.10.273.2.2.7
tedSwCapIfMtuGroup
tedSwCapIfMtu
The objects needed to implement the MTU information of the
local or remote TE link.
 .1.3.6.1.2.1.10.273.2.2.8
tedSwCapIndicationGroup
tedSwCapIndication
The objects needed to implement the indication of whether the
interface supports Standard or Arbitrary SONET/SDH.
 .1.3.6.1.2.1.10.273.2.2.9
tedSrlgGroup
tedSrlg
The objects needed to implement multiple SRLG values with
GMPLS TE information.
 .1.3.6.1.2.1.10.273.2.2.10
Compliance Statements (2)

OID .1.3.6.1.2.1.10.273.2.1.1
Compliance statement for agents provides full support for the
TED MIB.
Required groups
mandatory tedMainGroup
mandatory tedObjectsGroup
mandatory tedNotificationGroup
optional tedUnnumberedLinkGroup This group is mandatory for TE links that support the
unnumbered links.
optional tedNumberedLinkGroup This group is mandatory for TE links that support the
numbered links.
optional tedSwCapGroup This group is mandatory for TE links that support GMPLS
switching capability.
optional tedSwCapMinLspBandwidthGroup This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4.
optional tedSwCapIfMtuGroup This group is mandatory for TE links that support the MTU of
the local or remote TE link.
optional tedSwCapIndicationGroup This group is mandatory for TE links that support Standard or
Arbitrary SONET/SDH.
optional tedSrlgGroup This group is mandatory for TE links that support SRLG
information.

OID .1.3.6.1.2.1.10.273.2.1.2
Compliance requirement for implementations only provides read-
only support for TED. Such devices can then be monitored but
cannot be configured using this MIB module.
Required groups
mandatory tedMainGroup
optional tedUnnumberedLinkGroup This group is mandatory for TE links that support the
unnumbered links.
optional tedNumberedLinkGroup This group is mandatory for TE links that support the
numbered links.
optional tedSwCapGroup This group is mandatory for TE links that support some GMPLS
switching capabilities.
optional tedSwCapMinLspBandwidthGroup This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4.
optional tedSwCapIfMtuGroup This group is mandatory for TE links that support the MTU of
the local or remote TE link.
optional tedSwCapIndicationGroup This group is mandatory for TE links that support Standard or
Arbitrary SONET/SDH.
optional tedSrlgGroup This group is mandatory for TE links that support SRLG
information.
Notifications / Traps (3)
NameOIDDescription
tedStatusChange
tedLinkState
.1.3.6.1.2.1.10.273.0.1
This notification signifies that there has been change in the
TE information of tedTable, tedLocalIfAddrTable,
tedRemoteIfAddrTable, tedSwCapTable, and/or tedSrlgTable. For
example, this should be generated when tedUnreservedBandwidth is
changed to create or delete LSP using the registered TE link.
tedEntryCreated
tedLinkState
.1.3.6.1.2.1.10.273.0.2
This notification signifies that there has been new
registration in the TED table by receiving new TE link
information. For example, this should be generated when a new
index (tedLinkIndex) is registered in the TED table.
tedEntryDeleted
tedLinkState
.1.3.6.1.2.1.10.273.0.3
This notification signifies that there has been deletion of an
entry in the TED table. For example, this should be generated
when one of the existing entries is deleted in the TED table.