TCP-MIB
Monitored by Observium The MIB module for managing TCP implementations.
Copyright (C) The Internet Society (2005). This version
of this MIB module is a part of RFC 4022; see the RFC
itself for full legal notices.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Network statistics
Explore Observium network monitoring
- Source file
TCP-MIB- Last revised
- Identity
tcpMIB- Base OID
1.3.6.1.2.1.49
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'TCP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TCP-MIB::tcpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TCP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TCP-MIB::tcpMIB'
Objects (44)
10 directly used by Observium
Showing 44 of 44 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.49 |
||
.1.3.6.1.2.1.49.2 |
||
.1.3.6.1.2.1.49.2.1 |
||
.1.3.6.1.2.1.49.2.2 |
||
.1.3.6.1.2.1.6 |
||
|
Enumeration
|
.1.3.6.1.2.1.6.1 |
|
|
|
.1.3.6.1.2.1.6.10 |
|
|
|
.1.3.6.1.2.1.6.11 |
|
|
|
.1.3.6.1.2.1.6.12 |
|
|
|
.1.3.6.1.2.1.6.13 |
|
|
|
.1.3.6.1.2.1.6.13.1 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.6.13.1.1 |
|
|
.1.3.6.1.2.1.6.13.1.2 |
|
|
|
Integer32
|
.1.3.6.1.2.1.6.13.1.3 |
|
|
.1.3.6.1.2.1.6.13.1.4 |
|
|
|
Integer32
|
.1.3.6.1.2.1.6.13.1.5 |
|
|
.1.3.6.1.2.1.6.14 |
|
|
|
.1.3.6.1.2.1.6.15 |
|
.1.3.6.1.2.1.6.17 |
||
.1.3.6.1.2.1.6.18 |
||
.1.3.6.1.2.1.6.19 |
||
.1.3.6.1.2.1.6.19.1 |
||
.1.3.6.1.2.1.6.19.1.1 |
||
.1.3.6.1.2.1.6.19.1.2 |
||
.1.3.6.1.2.1.6.19.1.3 |
||
.1.3.6.1.2.1.6.19.1.4 |
||
.1.3.6.1.2.1.6.19.1.5 |
||
.1.3.6.1.2.1.6.19.1.6 |
||
|
Enumeration
|
.1.3.6.1.2.1.6.19.1.7 |
|
.1.3.6.1.2.1.6.19.1.8 |
||
|
millisecondsInteger32
|
.1.3.6.1.2.1.6.2 |
|
.1.3.6.1.2.1.6.20 |
||
.1.3.6.1.2.1.6.20.1 |
||
.1.3.6.1.2.1.6.20.1.1 |
||
.1.3.6.1.2.1.6.20.1.2 |
||
.1.3.6.1.2.1.6.20.1.3 |
||
.1.3.6.1.2.1.6.20.1.4 |
||
|
millisecondsInteger32
|
.1.3.6.1.2.1.6.3 |
|
|
Integer32
|
.1.3.6.1.2.1.6.4 |
|
|
|
.1.3.6.1.2.1.6.5 |
|
|
|
.1.3.6.1.2.1.6.6 |
|
|
|
.1.3.6.1.2.1.6.7 |
|
|
|
.1.3.6.1.2.1.6.8 |
|
|
|
.1.3.6.1.2.1.6.9 |
Dependencies (4) 3 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- TCP-MIBrfcselected
Conformance Groups (5)
|
tcpGroup
deprecated
|
tcpRtoAlgorithm tcpRtoMin tcpRtoMax tcpMaxConn tcpActiveOpens tcpPassiveOpens tcpAttemptFails tcpEstabResets tcpCurrEstab tcpInSegs tcpOutSegs tcpRetransSegs tcpConnState tcpConnLocalAddress tcpConnLocalPort tcpConnRemAddress tcpConnRemPort tcpInErrs tcpOutRsts
The tcp group of objects providing for management of TCP
entities. |
.1.3.6.1.2.1.49.2.2.1
|
|
tcpRtoAlgorithm tcpRtoMin tcpRtoMax tcpMaxConn tcpActiveOpens tcpPassiveOpens tcpAttemptFails tcpEstabResets tcpCurrEstab tcpInSegs tcpOutSegs tcpRetransSegs tcpInErrs tcpOutRsts
The group of counters common to TCP entities.
|
.1.3.6.1.2.1.49.2.2.2
|
|
|
The group provides general information about TCP
connections. |
.1.3.6.1.2.1.49.2.2.3
|
|
|
This group has objects providing general information about
TCP listeners. |
.1.3.6.1.2.1.49.2.2.4
|
|
|
The group of objects providing for counters of high speed
TCP implementations. |
.1.3.6.1.2.1.49.2.2.5
|
Compliance Statements (2)
OID
.1.3.6.1.2.1.49.2.1.1The compliance statement for IPv4-only systems that
implement TCP. In order to be IP version independent, this
compliance statement is deprecated in favor of
tcpMIBCompliance2. However, agents are still encouraged
to implement these objects in order to interoperate with
the deployed base of managers.
implement TCP. In order to be IP version independent, this
compliance statement is deprecated in favor of
tcpMIBCompliance2. However, agents are still encouraged
to implement these objects in order to interoperate with
the deployed base of managers.
Required groups
| mandatory | tcpGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| tcpConnState | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.49.2.1.2The compliance statement for systems that implement TCP.
A number of INDEX objects cannot be
represented in the form of OBJECT clauses in SMIv2 but
have the following compliance requirements,
expressed in OBJECT clause form in this description
clause:
-- OBJECT tcpConnectionLocalAddressType
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
-- DESCRIPTION
-- This MIB requires support for only global IPv4
-- and IPv6 address types.
--
-- OBJECT tcpConnectionRemAddressType
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
-- DESCRIPTION
-- This MIB requires support for only global IPv4
-- and IPv6 address types.
--
-- OBJECT tcpListenerLocalAddressType
-- SYNTAX InetAddressType { unknown(0), ipv4(1),
-- ipv6(2) }
-- DESCRIPTION
-- This MIB requires support for only global IPv4
-- and IPv6 address types. The type unknown also
-- needs to be supported to identify a special
-- case in the listener table: a listen using
-- both IPv4 and IPv6 addresses on the device.
--
A number of INDEX objects cannot be
represented in the form of OBJECT clauses in SMIv2 but
have the following compliance requirements,
expressed in OBJECT clause form in this description
clause:
-- OBJECT tcpConnectionLocalAddressType
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
-- DESCRIPTION
-- This MIB requires support for only global IPv4
-- and IPv6 address types.
--
-- OBJECT tcpConnectionRemAddressType
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
-- DESCRIPTION
-- This MIB requires support for only global IPv4
-- and IPv6 address types.
--
-- OBJECT tcpListenerLocalAddressType
-- SYNTAX InetAddressType { unknown(0), ipv4(1),
-- ipv6(2) }
-- DESCRIPTION
-- This MIB requires support for only global IPv4
-- and IPv6 address types. The type unknown also
-- needs to be supported to identify a special
-- case in the listener table: a listen using
-- both IPv4 and IPv6 addresses on the device.
--
Required groups
| mandatory | tcpBaseGroup | |
| mandatory | tcpConnectionGroup | |
| mandatory | tcpListenerGroup | |
| optional | tcpHCGroup |
This group is mandatory for systems that are capable of receiving or transmitting more than 1 million TCP segments per second. 1 million segments per second will cause a Counter32 to wrap in just over an hour. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| tcpConnectionState | readonly |
Enumeration
closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11)
|
Write access is not required, nor is support for the value deleteTCB (12). |