T11-FC-SP-AUTHENTICATION-MIB

        This MIB module specifies the management information
required to manage the Authentication Protocols defined by
Fibre Channel's FC-SP specification.
        
This MIB module defines three tables:
        
 - t11FcSpAuEntityTable is a table of Fibre Channel
   entities that can be authenticated using FC-SP's
   Authentication Protocols.
        
 - t11FcSpAuIfStatTable is a table with one row for each
   mapping of an Authentication entity onto an interface,
   containing statistics information.
        
 - t11FcSpAuRejectTable is a table of volatile information
   about FC-SP Authentication Protocol transactions
   that were most recently rejected.
        
Copyright (C) The IETF Trust (2008).  This version
of this MIB module is part of RFC 5324;  see the RFC
itself for full legal notices.
    

Imported Objects

FcNameIdOrZero, fcmInstanceIndexFC-MGMT-MIB
InterfaceIndexIF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUPSNMPv2-CONF
OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, mib-2, Counter32, Unsigned32, MODULE-IDENTITYSNMPv2-SMI
TimeStamp, TruthValue, AutonomousType, StorageTypeSNMPv2-TC
t11FamLocalSwitchWwnT11-FC-FABRIC-ADDR-MGR-MIB
T11FcSpDhGroups, T11FcSpHashFunctions, T11FcSpSignFunctions, T11FcSpLifetimeLeft, T11FcSpLifetimeLeftUnits, T11FcSpAuthRejectReasonCode, T11FcSpAuthRejReasonCodeExpT11-FC-SP-TC-MIB
T11FabricIndexT11-TC-MIB

Objects

t11FcSpAuthenticationMIB .1.3.6.1.2.1.176
t11FcSpAuMIBNotifications .1.3.6.1.2.1.176.0
t11FcSpAuMIBObjects .1.3.6.1.2.1.176.1
t11FcSpAuEntityTable .1.3.6.1.2.1.176.1.1
t11FcSpAuEntityEntry
.1.3.6.1.2.1.176.1.1.1
t11FcSpAuEntityName .1.3.6.1.2.1.176.1.1.1.1
t11FcSpAuDhChapHashFunctions
.1.3.6.1.2.1.176.1.1.1.10
t11FcSpAuDhChapDhGroups
.1.3.6.1.2.1.176.1.1.1.11
t11FcSpAuFcapHashFunctions
.1.3.6.1.2.1.176.1.1.1.12
t11FcSpAuFcapCertsSignFunctions
.1.3.6.1.2.1.176.1.1.1.13
t11FcSpAuFcapDhGroups
.1.3.6.1.2.1.176.1.1.1.14
t11FcSpAuFcpapHashFunctions
.1.3.6.1.2.1.176.1.1.1.15
t11FcSpAuFcpapDhGroups
.1.3.6.1.2.1.176.1.1.1.16
t11FcSpAuFabricIndex
.1.3.6.1.2.1.176.1.1.1.2
t11FcSpAuServerProtocol
.1.3.6.1.2.1.176.1.1.1.3
t11FcSpAuStorageType
.1.3.6.1.2.1.176.1.1.1.4
t11FcSpAuSendRejNotifyEnable
.1.3.6.1.2.1.176.1.1.1.5
t11FcSpAuRcvRejNotifyEnable
.1.3.6.1.2.1.176.1.1.1.6
t11FcSpAuDefaultLifetime
.1.3.6.1.2.1.176.1.1.1.7
t11FcSpAuDefaultLifetimeUnits
.1.3.6.1.2.1.176.1.1.1.8
t11FcSpAuRejectMaxRows .1.3.6.1.2.1.176.1.1.1.9
t11FcSpAuIfStatTable .1.3.6.1.2.1.176.1.2
t11FcSpAuIfStatEntry
.1.3.6.1.2.1.176.1.2.1
t11FcSpAuIfStatInterfaceIndex
.1.3.6.1.2.1.176.1.2.1.1
t11FcSpAuIfStatFabricIndex
.1.3.6.1.2.1.176.1.2.1.2
t11FcSpAuIfStatTimeouts
.1.3.6.1.2.1.176.1.2.1.3
t11FcSpAuIfStatInAcceptedMsgs
.1.3.6.1.2.1.176.1.2.1.4
t11FcSpAuIfStatInLsSwRejectedMsgs
.1.3.6.1.2.1.176.1.2.1.5
t11FcSpAuIfStatInAuthRejectedMsgs
.1.3.6.1.2.1.176.1.2.1.6
t11FcSpAuIfStatOutAcceptedMsgs
.1.3.6.1.2.1.176.1.2.1.7
t11FcSpAuIfStatOutLsSwRejectedMsgs
.1.3.6.1.2.1.176.1.2.1.8
t11FcSpAuIfStatOutAuthRejectedMsgs
.1.3.6.1.2.1.176.1.2.1.9
t11FcSpAuRejectTable .1.3.6.1.2.1.176.1.3
t11FcSpAuRejectEntry
.1.3.6.1.2.1.176.1.3.1
t11FcSpAuRejInterfaceIndex
.1.3.6.1.2.1.176.1.3.1.1
t11FcSpAuRejFabricIndex
.1.3.6.1.2.1.176.1.3.1.2
t11FcSpAuRejTimestamp
.1.3.6.1.2.1.176.1.3.1.3
t11FcSpAuRejDirection .1.3.6.1.2.1.176.1.3.1.4
t11FcSpAuRejType .1.3.6.1.2.1.176.1.3.1.5
t11FcSpAuRejAuthMsgString .1.3.6.1.2.1.176.1.3.1.6
t11FcSpAuRejReasonCode
.1.3.6.1.2.1.176.1.3.1.7
t11FcSpAuRejReasonCodeExp
.1.3.6.1.2.1.176.1.3.1.8
t11FcSpAuMIBConformance .1.3.6.1.2.1.176.2
t11FcSpAuMIBCompliances .1.3.6.1.2.1.176.2.1
t11FcSpAuMIBGroups .1.3.6.1.2.1.176.2.2
t11FcSpAuMIBIdentities .1.3.6.1.2.1.176.3
t11FcSpAuServerProtocolRadius .1.3.6.1.2.1.176.3.1
t11FcSpAuServerProtocolDiameter .1.3.6.1.2.1.176.3.2
t11FcSpAuServerProtocolTacacs .1.3.6.1.2.1.176.3.3

Notifications/Traps

NameOIDDescription
t11FcSpAuRejectSentNotify





.1.3.6.1.2.1.176.0.1
This notification indicates that a Switch (identified
by the value of t11FamLocalSwitchWwn) has sent a reject
message of the type indicated by t11FcSpAuRejType in
response to an AUTH message.
          
The content of the rejected AUTH message is given by the
value of t11FcSpAuRejAuthMsgString.  The values of the
Reason Code and Reason Code Explanation in the
AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp.
t11FcSpAuRejectReceivedNotify





.1.3.6.1.2.1.176.0.2
This notification indicates that a Switch (identified
by the value of t11FamLocalSwitchWwn) has received a
reject message of the type indicated by t11FcSpAuRejType
in response to an AUTH message.
          
The content of the rejected AUTH message is given by the
value of t11FcSpAuRejAuthMsgString.  The values of the
Reason Code and Reason Code Explanation in the
AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp.