SYMBOL-WS5000-MIB Table View

Wireless Switch  Policy Table.

ccPolicyEntry row .1.3.6.1.4.1.388.6.1.2.1

The entries of information about the Wireless Switch Policies.

Indexes

ccPolicyIndex

Column	Syntax	OID
ccPolicyIndex The index of the policy.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.2.1.1
ccPolicyName The name of the policy. The Maximum length of the Policy Name can be 50 characters, Note that the following characters cannot be part of Policy Name field, double quotes,',.,\,& and #.	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.1.2.1.2
ccPolicyDesc The description of the policy. The Maximum length of the description can be 128 characters, please note that the following characters cannot be part of description double quotes,' and #.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.388.6.1.2.1.3
ccPolicyCountry The Country Code chosed by this policy.	OctetStringr/w Constraints: range: 0-2	.1.3.6.1.4.1.388.6.1.2.1.4
ccPolicyDefAdoptAPPolicydeprecated The default AP policy for any adopted Access Port.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.1.2.1.5
ccPolicyAPPolicyCount The number of Access Port policies used by the Wireless Switch policy.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.388.6.1.2.1.6
ccPolicyAPNameOfPolicy A list of AP policies applied for this ccPolicy.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.1.2.1.7
ccPolicyAddAPPolicy Add an AP policy to the Wireless Switch Policy. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes. This OID is write-only.	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.1.2.1.8
ccPolicyRmvAPPolicy Remove an AP policy from the Wireless Switch Policy. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and double quotes. This OID is write-onl…	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.1.2.1.9
ccPolicyExcludeInfo Add new entries to be excluded from adoption by the WS5000 Wireless Switch, and view the current exclusion list. This table includs MAC-Start and MAC-End address,and the radio type. The returned string has the format: …	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.388.6.1.2.1.10
ccPolicyExcludeEdit Edit the existing Exclude Table. Note: the input string format must be in the following format: 1. <OldMacStartAddr,OldRadioType,NewMacStartAddr,NewRadioType> 2. <OldMacStartAddr,OldRadioType,NewMacStartAddr-NewMacEndAd…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.388.6.1.2.1.11
ccPolicyExcludeRmv Remove an existing entry from the Exclude Table in the Adoption List. Note: the input string must be in the format: <Start-MAC, RadioType>, where Start-MAC is the starting MAC address of a particular entry…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.388.6.1.2.1.12
ccPolicyIncludeInfo Add new entries to be included for adoption by the WS5000 Wireless Switch. This table includes MAC-Start and MAC-End address,the radio type, and the APPolicy with which the radio will be adopted, upon inclusion. The ret…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.388.6.1.2.1.13
ccPolicyIncludeEdit Edit an existing entry in the Include list for adoption. The entered string should have either of the following format: 1. <OldMacStartAddr,OldRadioType,NewMacStartAddr,NewRadioType,NewAPPolicyName> 2. <OldMacStartAddr,…	OctetStringr/w Constraints: range: 0-225	.1.3.6.1.4.1.388.6.1.2.1.14
ccPolicyIncludeRmv Remove an existing entry from the Include Table in the Adoption List. Note: the input string must be in the format: <Start MAC, RadioType>, where Start-MAC is the starting MAC address of a particular entr…	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.388.6.1.2.1.15
ccPolicyEtherPolicy The current active Ethernet policy for the Ethernet Port.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.1.2.1.16
ccPolicyTrap The true(1) indicates: send a SNMP trap when deny an AP adoption. The false(2) indicates: not send a SNMP trap when deny an AP adoption	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.1.2.1.17
ccPolicyDefChanneldeprecated The default Channel to be used.	Integer32r/w Constraints: range: 1-14	.1.3.6.1.4.1.388.6.1.2.1.18
ccPolicyDefPowerdeprecated The default power to be used (in mW). Valid values are :1,5,10,15,100.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.2.1.19
ccPolicyChannel11a The Channel to be used for 11a radios. Valid values for this channel are: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161 You can also input 'auto-always' for allowing the switch to choose channels automatically. 'au…	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.2.1.20
ccPolicyPower11a The power to be used (in dbM). Valid values are :4-20	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.1.2.1.21
ccPolicyChannel11b The Channel to be used for 11b radios. Valid values range from 1,2,3... through 14. You can also input 'auto-always' for allowing the switch to choose channels automatically. 'auto-once' can be input if you want the sw…	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.2.1.22
ccPolicyPower11b The power to be used (in dBm). Valid values are :4-20	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.1.2.1.23
ccPolicyDSCoExistence Enable(true)/disable(false) FH and DS coexistence. Set for country code US,Israel,Mexico,Sri Lanka,Japan returns an error and Get returns -1.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.1.2.1.24
ccPolicyDefAdoptAPPolicy11a The default AP policy to be used for adopted 11a radios. To clear the existing policy, leave the input blank.	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.388.6.1.2.1.25
ccPolicyDefAdoptAPPolicy11b The default AP policy to be used for adopted 11b radios. To clear the existing policy, leave the input blank.	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.388.6.1.2.1.26
ccPolicyDefAdoptAPPolicyFH The default AP policy to be used for adopted FH radios. To clear the existing policy, leave the input blank.	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.388.6.1.2.1.27
ccPolicyDefAdoptAPPolicy11g The default AP policy to be used for adopted 11g radios. To clear the existing policy, leave the input blank.	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.388.6.1.2.1.28
ccPolicyChannel11g The default Channel to be used for 11g radios. Valid values are 1 to 14. You can also input 'auto-always' for allowing the switch to choose channels automatically. 'auto-once' can be input if you want the switch to c…	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.2.1.29
ccPolicyPower11g The power to be used (in dBm). Valid values are :4-20	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.1.2.1.30

Country Information Table.

ccCountryInfoEntry row .1.3.6.1.4.1.388.6.1.3.1

An entry in this table indicates one country information.

Indexes

ccCCIndex

Column	Syntax	OID
ccCCIndex Index of the table.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.3.1.1
ccCCode The Country Code for this country	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.388.6.1.3.1.2
ccFullName The name of this country.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.388.6.1.3.1.3
cc11aChannels The list of 11a channels applicable to this country.	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.388.6.1.3.1.6
cc11bChannels The list of 11b channels applicable to this country.	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.388.6.1.3.1.7
ccFHTableNum The hop sequence table number	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.388.6.1.3.1.8
ccFHChannels List of all FH Channels	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.388.6.1.3.1.9
ccFHAlgorithm The algorithm used for frequency hopping.	FHAlgorithm Type Values: 0 ieee 1 hopdelta	.1.3.6.1.4.1.388.6.1.3.1.10
ccFHContiguous Number of total contiguous channels	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.388.6.1.3.1.11
ccFHHopSequence The Hop Sequence used in the frequency hopping algorithm	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.388.6.1.3.1.12
cc11gChannels The list of 11g channels applicable to this country.	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.388.6.1.3.1.13

A table of remote Slave-KDC information.
Then we assume that the current on-board KDC is a master KDC.

slaveEntry row .1.3.6.1.4.1.388.6.1.4.4.4.1

The entries of information about the remote Slave-KDC.

Indexes

slaveIndex

Column	Syntax	OID
hostName The host name of a remote slave KDC. The Maximum length of the KDC Host Name can be 50 characters. For hostname, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxy…	OctetString Constraints: range: 1-50	.1.3.6.1.4.1.388.6.1.4.4.4.1.1
realM The realm for the remote Slave-KDC. The Maximum length of the KDC Realm can be 32 characters. Note that the following characters cannot be part of KDC Realm field - `@#$&()|\\;'<>/ = and double quotes.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.1.4.4.4.1.2
ipAddress The IP address of the remote Slave-KDC.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.388.6.1.4.4.4.1.3
domainName The domain name of a remote slave KDC. For domain, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or last char…	OctetString Constraints: range: 0-50	.1.3.6.1.4.1.388.6.1.4.4.4.1.4
slaveIndex The index of the SlaveTable	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.4.4.4.1.5

The (conceptual) table listing the RADIUS authentication
servers with which the client shares a secret.

radiusAuthServerEntry row .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1

An entry (conceptual row) representing a RADIUS
authentication server with which the client shares
a secret.

Indexes

radiusAuthServerIndex

Column	Syntax	OID
radiusAuthServerIndex A number uniquely identifying each RADIUS Authentication server with which this client communicates. Note that Index 1 denotes the Primary RADIUS server, while 2 denotes the secondary RADIUS server.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.1
radiusAuthServerAddress The IP address or the name of the RADIUS authentication server referred to in this table entry.The syntax for the input is :<host_name/IP>,<RADIUS Secret>.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.2
radiusAuthClientServerPortNumber The UDP port the client is using to send requests to this server.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.3
radiusAuthClientRoundTripTime The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.4
radiusAuthClientAccessRequests The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.5
radiusAuthClientAccessRetransmissions The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.6
radiusAuthClientAccessAccepts The number of RADIUS Access-Accept packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.7
radiusAuthClientAccessRejects The number of RADIUS Access-Reject packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.8
radiusAuthClientAccessChallenges The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.9
radiusAuthClientMalformedAccessResponses The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Signature attributes or unknown types are not included as…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.10
radiusAuthClientBadAuthenticators The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.11
radiusAuthClientPendingRequests The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an A…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.12
radiusAuthClientTimeouts The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a t…	Integer32r/w Constraints: range: 5-20	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.13
radiusAuthClientUnknownTypes The number of RADIUS packets of unknown type which were received from this server on the authentication port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.14
radiusAuthClientPacketsDropped The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.15
radiusAuthClientIdentifier The NAS identifier of the RADIUS authentication client.	SnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.16

A list of Syslog predefined events

ccEventEntry row .1.3.6.1.4.1.388.6.1.6.5.1

An entry in the Events Table

Indexes

ccEventIndex

Column	Syntax	OID
ccEventIndex Index of an specific event.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.6.5.1.1
ccEventDescr Description of an specific event.	OctetString Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.6.5.1.2
ccEventDefault Set the event to its default state. Only 'true' is an acceptable value. This variable is SET-only.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.1.6.5.1.3
ccEventSyslog Enable/Disable Syslog for this Event. In order to SET the Syslog level for this Event to a particular severity level, enter the severity level as the input. The accepted severity levels are: 'emerg' for emergency lev…	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.1.6.5.1.4
ccEventSNMPTrap Current SNMP-Trap's status of an specific event. Setting it to 'true' activates the SNMP trap for this particular Event, while 'false' deactivates it	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.1.6.5.1.5
ccEventLocalLog Activate/Deactivate local logging. 'true' activates local logging. 'false' deactivates local logging for this particular Event.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.1.6.5.1.6

A list of Syslog Hosts

ccSyslogHostsEntry row .1.3.6.1.4.1.388.6.1.6.6.2.3.1

An entry in Syslog Hosts table

Indexes

ccSyslogHostIndex

Column	Syntax	OID
ccSyslogHostIndex Index of specific Syslog Host.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.6.6.2.3.1.1
ccSyslogHostName DNS name of specific Syslog Host.	OctetString Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.6.6.2.3.1.2
ccSyslogHostIPAddr IP address of the Syslog Host	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.388.6.1.6.6.2.3.1.3
ccSyslogHostDomain Domain Name of the Syslog Host. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or la…	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.6.6.2.3.1.4
ccSyslogHostSetSeverity Set the severity level for which this particular host will receive syslog messages. The input format is: <SeverityLevel/'all','on'/'off'> where SeverityLevel can be one of the following strings: 'emerg' for emergency …	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.6.6.2.3.1.5
ccSyslogHostSeverityList The list of all severity levels whose messages this host is configured to receive.	OctetString Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.6.6.2.3.1.6

A list of Syslog Hosts

ccSystemHostsEntry row .1.3.6.1.4.1.388.6.1.7.3.1

An entry in Syslog Hosts table

Indexes

ccSystemHostIndex

Column	Syntax	OID
ccSystemHostIndex Index of specific System Host.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.7.3.1.1
ccSystemHostName DNS name of specific System Host.	OctetString Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.7.3.1.2
ccSystemHostIPAddr IP address of the System Host	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.388.6.1.7.3.1.3
ccSystemHostDomain Domain Name of the System Host. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the first or la…	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.1.7.3.1.4

A list of objects used to add/remove items from
the Restricted channels list

ccPolicyRCAddRemEntry row .1.3.6.1.4.1.388.6.1.8.1.1

An entry in the table of RC Add Remove objects.
The two indices are ccPolicyIndex and ccPolicyRadioType.
ccPolicyIndex is taken from the ccPolicyTable, and specifies which
CCPolicy's Restricted Channel table is being a…

Indexes

ccPolicyIndex ccPolicyRadioType

Column	Syntax	OID
ccPolicyRadioType ccPolicyRadioType is used as one of the indicies to specify the type of the radio (A or B) to which the Restricted Channel table belongs. A value of 1 for this index denotes an 11a radio and 2 denotes an 11b r…	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.388.6.1.8.1.1.1
ccPolicyRCAdd Add an entry into the RC Table for this CCPolicy and radiotype. If you want to specify a reason for declaring a particular channel as a restricted channel, you can enter the data in this format: <Channel number, reason>…	OctetStringr/w Constraints: range: 1-44	.1.3.6.1.4.1.388.6.1.8.1.1.2
ccPolicyRCRem Remove an entry from the RC Table for this CCPolicy and radiotype. You just need to specify the channel number which you want to be removed from the table.	OctetStringr/w Constraints: range: 1-300	.1.3.6.1.4.1.388.6.1.8.1.1.3

A list of restricted channels and their descriptions.
(Per CCPolicy, per RadioType)

ccPolicyRCEntry row .1.3.6.1.4.1.388.6.1.8.2.1

An entry in the Restricted Channels table.
The three indices are ccPolicyIndex,ccPolicyRadioType, and ccPolicyRcIndex.
ccPolicyIndex is taken from the ccPolicyTable, and specifies which
CCPolicy's Restricted Channel ta…

Indexes

ccPolicyIndex ccPolicyRadioType ccPolicyRcIndex

Column	Syntax	OID
ccPolicyRcIndex The index of the restricted channel	Integer32 Constraints: range: 1-300	.1.3.6.1.4.1.388.6.1.8.2.1.1
ccPolicyRCChannelDescr The channel number and description,at this particular index in the Restricted channel table. The returned string is in the format <channel,description>. Note that if no description has been entered for that particular …	OctetString Constraints: range: 1-44	.1.3.6.1.4.1.388.6.1.8.2.1.2

Table of APPolicies per Wireless Switch Policy

ccPolicyAPPolicyEntry row .1.3.6.1.4.1.388.6.1.9.2.1

The entries of APPolicies per Wireless Switch Policy.

Indexes

ccPolicyIndex ccPolicyAPPolicyIndex

Column	Syntax	OID
ccPolicyAPPolicyIndex The index of the AP policy.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.1.9.2.1.1
ccPolicyAPPolicyName A list of AP policies applied for this Switch Policy.	OctetString Constraints: range: 1-50	.1.3.6.1.4.1.388.6.1.9.2.1.2

The Table of AccessPorts.

ccAPEntry row .1.3.6.1.4.1.388.6.2.10.1

An AccessPort Configuration entry.

Indexes

ccRadioIndex

Column	Syntax	OID
ccRadioIndex The Index for the Access port.	Integer32 Constraints: range: 1-300	.1.3.6.1.4.1.388.6.2.10.1.28
ccRadioName The Name of the Access port. The Maximum length of the Radio Name can be 50 characters. Note that the following characters cannot be part of Radio Name field - ',.,\,&, # and double quotes	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.2.10.1.29
ccRadioDesc The description of the Access port. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# and double quotes.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.388.6.2.10.1.30
ccRadioOnlineStatus Online status for this Access port. 0(zero) means 'unavailable' or non-existent. 1 means 'active',, i.e. functional 2 means 'inactive',existent but not functional. 3 means 'alert' indicating that some errors have occur…	APOnlineStatus Type Values: 0 unavailable 1 active 2 inactive 3 alert 4 reset	.1.3.6.1.4.1.388.6.2.10.1.31
ccRadioMAC The MAC address of this radio.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.388.6.2.10.1.32
ccDeviceMAC The MAC address of the device to which this radio belongs.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.388.6.2.10.1.33
ccDeviceLocation The location of this device.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.388.6.2.10.1.34
ccRadioType The type of this radio. 'A' or 'B' denote 802.11a and 802.11b respectively. 'FH' denotes an FH radio.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.10.1.35
ccRadioChannel The channel on which this radio is operating. Valid values for 11a are:34,36,38,40...64. Valid values for 11b are:1,2,3,...14. Also, 'auto-once' is a valid channel if you want switch to choose channel automaticlly. 'au…	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.2.10.1.36
ccRadioPowerdeprecated The power on which this radio is operating. Valid values for both 11a and 11b are :1,5,15,30,Full.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.10.1.37
ccRadioPolicy The policy governing this radio. To clear the existing policy, leave the input blank.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.388.6.2.10.1.38
ccDeviceNic The NIC number on which this device is connected to the WS5000 wireless Switch. Valid Values are 1 or 2	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.10.1.39
ccDeviceType The type of the device. Expect either of 'AP200','AP100','AP300','AP4121','AP3020/3021' as the value.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.10.1.40
ccRadioCCAmode The CCA Mode for the Access port.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.388.6.2.10.1.41
ccRadioCCAthresh The CCA threshold for the Access port.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.388.6.2.10.1.42
ccRadioDiversity The antenna setting for the Access Port. Valid values are 0,1 and 2. 0 indicates Full, 1 indicates primary, and 2 indicates secondary.	Integer32r/w Constraints: range: 0-10	.1.3.6.1.4.1.388.6.2.10.1.43
ccDeviceVlanid The VLAN id for the Access port.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.388.6.2.10.1.44
ccDeviceVlanTagsSeen The Vlan Tags seen by this device.	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.10.1.45
ccRadioUptime The time for which this radio has been up.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.10.1.46
ccRadioTxpps The number of packets transmitted per second between AP and MU.	Integer32 Constraints: range: 1-100000	.1.3.6.1.4.1.388.6.2.10.1.47
ccRadioMUs The number of MUs associated with this radio.	Integer32 Constraints: range: 0-200	.1.3.6.1.4.1.388.6.2.10.1.48
ccRadioGatherStatistics true(1)/false(2) to turn on/off the functionality of gathering AP statistic data.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.10.1.49
ccRadioReset A 'true' as input will reset the Radio. 'false' is not an acceptable input. Note that a Reset message can be sent out only if the radio is in 'active' state. This object is SET-only.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.10.1.50
ccDeviceClearSeenVlanTagsdeprecated true(1) will clear the seen Vlans	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.10.1.51
ccDeviceReset A 'true' as input will reset the Device. 'false' is not an acceptable input. This object is SET-only.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.10.1.52
ccRadioAutodeprecated 'true' enables ACS-on-adoption for this particular radio.'false' disables it.	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.10.1.53
ccRadioMUPowerdeprecated The power value to be put in the beacon of this radio. Valid values are : 1,5,15,30,Full,default. Note that 'default' as input causes the beacon to have the same power level as this radio.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.388.6.2.10.1.54
ccRadioProtection Defines whether 'Protection' is On or Off.	OctetString Constraints: range: 1-5	.1.3.6.1.4.1.388.6.2.10.1.55
ccRadioShortSlot Defines whether Short Slot is On or Off.	OctetString Constraints: range: 1-5	.1.3.6.1.4.1.388.6.2.10.1.56
ccRadioAntenna Defines whether antenna type is internal, external or unknown.	OctetString Constraints: range: 1-10	.1.3.6.1.4.1.388.6.2.10.1.57
ccRadioCurrentChannel Current channel.	OctetString Constraints: range: 1-200	.1.3.6.1.4.1.388.6.2.10.1.58
ccRadioAllChannels A comma seperated list of all channels valid for this radio.	OctetString Constraints: range: 1-200	.1.3.6.1.4.1.388.6.2.10.1.59
ccRadioPowerdBm The power on which the radio is configured to operate in dBm. Valid range depends on the country and radio configuration. It is as defined in the 'ccRadioAllPower' object.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.10.1.60
ccRadioCurrentPower The power on which the radio is currently operating in dBm.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.10.1.61
ccRadioAllPower The valid power range for the radio in the format 'min_power-max_power'.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.10.1.62
ccRadioMUPowerdBm Power level adjustment for MU. The valid range is -20 to 20 dB.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.10.1.63
ccRadioAntCorrection Antenna correction factor. The valid range is -20 to 20dBi. Note:This OID is supported only for AP300 device with external antenna	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.388.6.2.10.1.64
ccRadioIndoor Radio location indoor or outdoor. Valid values are 'in' or 'out'. Note:This OID is supported only for AP300 device with external antenna	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.10.1.65
ccRadioDFS DFS status. Valid values are:off,on,active,channel scan. Supported only for 11a radio.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.10.1.66
ccRadioTPC TPC status. Valid values are: off,on. Supported only for 11a radio.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.10.1.67
ccRadioRadarChannels A comma seperated list of all channels with timestamps where radar was detected.	OctetString Constraints: range: 1-200	.1.3.6.1.4.1.388.6.2.10.1.68
ccDetectorAp If this is enabled, the switch uses this AP to detect Rogue APs.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.10.1.69
ccRadioMaxMUs The number of maximum MUs for the Access port	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.388.6.2.10.1.70
ccSimulateRadar True(1) value will set simulateradar. Setting it true sets the Dwell time value. Note: A get over it always return idealState(2) and this OID is supported only for AP300 device type A set…	DoActionNowr/w Type Values: 1 doActionRightNow 2 idleState	.1.3.6.1.4.1.388.6.2.10.1.71
ccRadioUser802x Set the 802.1x user name and password Syntax: <user name>,<password> Note: This OID is supported only for AP300 device type The maximum length of user and password is 32 each.	OctetStringr/w	.1.3.6.1.4.1.388.6.2.10.1.72

APPolicy Table.

ccAPPolicyEntry row .1.3.6.1.4.1.388.6.2.11.1

An entry in this table indicates the interface policy information.

Indexes

ccAPPolicyIndex

Column	Syntax	OID
ccAPPolicyIndex The index of the AP policy.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.11.1.1
ccAPPolicyName The name of the policy. The Maximum length of the Policy Name can be 50 characters, Note that the following characters cannot be part of Policy Name field, double quotes,',.,\,& and #.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.2.11.1.2
ccAPPolicyDesc The description of the AP policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description double quotes,' and #	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.388.6.2.11.1.3
ccAPPolicyPreAmble Long/Short preamble feature for the WLANs in this APPolicy.	OctetStringr/w Constraints: range: 4-5	.1.3.6.1.4.1.388.6.2.11.1.10
ccAPPolicyBeaconInterval The interval at which beacons are transmitted. Valid values are between 20 to 1000	Integer32r/w Constraints: range: 20-1000	.1.3.6.1.4.1.388.6.2.11.1.11
ccAPPolicyRTSThreshold The RTS (Request To Send) threshold for this WLAN. This threshold means that any unicast data or management frames larger than this setting must be transmitted using the RTS/CTS (Clear to Send) handshake exchange. By …	Integer32r/w Constraints: range: 0-2347	.1.3.6.1.4.1.388.6.2.11.1.12
ccAPPolicyDTIM This setting, always a multiple of the beacon period, determines how often the beacon contains a delivery traffic indication message(DTIM). The DTIM tells power-save client devices that a packet is waiting for them. …	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.388.6.2.11.1.13
ccAPPolicyBasicRates11a The Basic Rate set for 11a radios which shall be governed by this policy. Valid values could be any combination of 6,9,12,18,24,36,48,54.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.14
ccAPPolicySupportedRates11a The Supported Rate set for 11a radios which shall be governed by this policy. Valid values could be any combination of 6,9,12,18,24,36,48,54	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.15
ccAPPolicyBasicRates11b The Basic Rate set for 11b radios which shall be governed by this policy. Valid values are any combination of 1,2,5.5,11	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.16
ccAPPolicySupportedRates11b The Supported Rate set for 11b radios which shall be governed by this policy. Valid values are any combination of 1,2,5.5,11	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.17
ccAPPolicyBasicRatesFH The Basic Rate set for FH radios which shall be governed by this policy. Valid values are any combination of 1 and 2	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.18
ccAPPolicySupportedRatesFH The Supported Rate set for FH radios which shall be governed by this policy. Valid values are any combination of 1 and 2, or blank	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.19
ccAPPolicyBasicRates11g The Basic Rate set for 11g radios that shall be governed by this policy. Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.20
ccAPPolicySupportedRates11g The Supported Rate set for 11g radios that shall be governed by this policy. Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54 or blank.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.21
ccAPPolicyNonSpectrumMgmt Allow non DFC/TPC MU to associate when spectrum management is required. Valid values:true,false.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.11.1.22
ccAPPolicyAddAllWlan Add a WLAN to a Access Port Policy, WLAN added should be a valid WLAN and should not have already been added to this policy. Upto 16 WLANs can be added to a AP Policy. A get on this object returns nothing. The WLAN adde…	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.2.11.1.23
ccAPPolicyRemAllWlan Removes a WLAN from a Access Port Policy. The WLAN to be removed should have already been added to this policy. Thw WLAN will be removed from all the mappings and the corresponding primary settings will be reset.	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.2.11.1.24
ccAPPolicyWMEEnable Description. Enable/Disable of WME for APPolicy	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.2.11.1.25
ccAPPolicyWMEProfile Description. WME Profile of APpolicy.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.2.11.1.26
ccAPPolicyDTIM2 Description.	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.11.1.27
ccAPPolicyDTIM3 Description.	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.11.1.28
ccAPPolicyDTIM4 Description.	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.11.1.29

EtherPorts entries.

ccEPEntry row .1.3.6.1.4.1.388.6.2.12.1

An ethernet port configuration entry.

Indexes

ccEPIndex

Column	Syntax	OID
ccEPIndex The Index for the Ethernet port.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.12.1.1
ccEPNic This number indicates an index of NIC cards in the system.	Integer32 Constraints: range: 0-10	.1.3.6.1.4.1.388.6.2.12.1.2
ccEPName The Name of this ethernet port.	OctetString Constraints: range: 1-50	.1.3.6.1.4.1.388.6.2.12.1.3
ccEPDesc The detailed description for the ethernet port. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# and double quotes.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.388.6.2.12.1.4
ccEPMacAddr The Mac address for the Ethernet port.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.388.6.2.12.1.5
ccEPEnable Enable/Disable the ethernet port to be a 802.1q Trunk port. Syntax:For enabling <1,PrimaryVLanId> For disabling <0>.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.2.12.1.6
ccEPSpeeddeprecated The speed of the ethernet port, such as 10 means the 10 Mps or 100 means 100 Mps.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.388.6.2.12.1.7
ccEPEnableDHCP Enable/Disable DHCP server for this Ethernet port.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.12.1.8
ccEPIPAddr The IP address of Ethernet port.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.388.6.2.12.1.9
ccEPNetMask The netmask address for the Ethernet port.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.388.6.2.12.1.10
ccEPDnsCount The number of DNS used by the ethernet port.	Integer32 Constraints: range: 0-999	.1.3.6.1.4.1.388.6.2.12.1.13
ccEPDnsList A list of DNS address for Ethernet port.	OctetString Constraints: range: 0-1042	.1.3.6.1.4.1.388.6.2.12.1.14
ccEPPrimaryVid Primary VLANId for this etherport. Note: 0 or 4096 means non-trunked(no VLAN)	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.388.6.2.12.1.15
ccEPOnline false(2) means the online status of the ethernet port is NOT Active. true(1) means the ethernet port is Active.	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.12.1.16
ccEPDisplayName The user-friendly name of the Ethernet Port.	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.12.1.17
ccEPUptime The time elapsed since the EtherPort has been up.	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.12.1.18
ccEPTx The number of output packets transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.2.12.1.19
ccEPRx The number of input packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.388.6.2.12.1.20
ccEPDomain The domain name on this Ethernet Port. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._- Also, '_' , '-' and '.' cannot be the firs…	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.2.12.1.21
ccEPGateway The gateway address being used by the Ethernet port. Note:To add a gateway use ccTaf OID.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.388.6.2.12.1.22
ccEPCFGMode The configured mode of this Etherport. Valid inputs are : '10_half','10_full','100_half', '100_full','auto'.	OctetStringr/w Constraints: range: 4-10	.1.3.6.1.4.1.388.6.2.12.1.23
ccEPDuplex Negotiated mode - duplex	OctetString Constraints: range: 4-5	.1.3.6.1.4.1.388.6.2.12.1.24
ccEPMode Negotiated mode - speed	OctetString Constraints: range: 4-5	.1.3.6.1.4.1.388.6.2.12.1.25
ccEPDhcpPriVlan Description.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.12.1.26
ccEPDDNSStatus Enable (1) / Disable (2) DDNS updates by DHCP Server	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.12.1.27
ccEPDDNSttl TTL for DDNS	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.12.1.28
ccEPDDNSUpdateAll Update all DDNS entries	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.2.12.1.29
ccEPDDNSMUserStatus Enable (1) / Disable (2) RFC 3004 Multiple User Class	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.12.1.30
ccEPDDNSDomainName the domain to be updated by DDNS	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.2.12.1.31

A list of Ethernet port policy entries.

ccEPPEntry row .1.3.6.1.4.1.388.6.2.13.1

An Ethernet port policy entry.

Indexes

ccEPPIndex

Column	Syntax	OID
ccEPPIndex The Index for the Ethernet policy.	Integer32 Constraints: range: 1-200	.1.3.6.1.4.1.388.6.2.13.1.1
ccEPPName Ethernet policy name for one record.	OctetString Constraints: range: 1-50	.1.3.6.1.4.1.388.6.2.13.1.2
ccEPPAlias The Alias for this EtherPort Policy. The Maximum length of the EP Policy Name can be 50 characters. Note that the following characters cannot be part of EP Policy Name field - ',.,\,&, # and double quotes.	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.2.13.1.3
ccEPPDesc A description about this ethernet policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description ',# and double quotes.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.388.6.2.13.1.4
ccEPPRonnic This object indicates a NIC port number through which the WS-5000 Wireless Switch will talk to the rest of network. That means, in case of NO VLAN, every incoming packet will go out at this NIC port number.	Integer32r/w Constraints: range: 0-200	.1.3.6.1.4.1.388.6.2.13.1.5
ccEPPVlanCount The number of VLANs attached to the Ethernet policy.	Integer32 Constraints: range: 0-500	.1.3.6.1.4.1.388.6.2.13.1.6
ccEPPVlanList Show a list of VLAN objects attatched to this ethernet policy. Display Format LAN1,LAN2,VLAN:Interface number	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.388.6.2.13.1.7
ccEPPCreateNewVlan Create a new VLAN in this EtherPort Policy. The input has to be of the format: <VlanID,NicNumber>, where VlanID can be any integer from 1 through 4095, and NicNumber is the etherport on which this VLAN is set. The NicNu…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.13.1.8
ccEPPRemVlan Remove one VLAN from this Etherport policy. Only the Vlan Id needs to be input for removal	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.13.1.9
ccEPPDropVlan Drop all the VLANs for this Etherpolicy. A 'true' does the job	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.2.13.1.10

The table for FH specific configuration parameters

ccdot11FHPhyEntry row .1.3.6.1.4.1.388.6.2.14.1

An entry in the FH Phy Table.

Indexes

ccdot11FHIndex

Column	Syntax	OID
ccdot11FHIndex The index of this FH radio.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.388.6.2.14.1.1
ccdot11FHHopTime The time in microseconds for the PMD to change from channel 2 to channel 80.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.14.1.2
ccdot11FHCurrentChannelNumber The current channel number of the frequency output by the RF synthesizer.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.14.1.3
ccdot11FHMaxDwellTime The maximum time in TU that the transmitter is permitted to operate on a single channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.14.1.4
ccdot11FHCurrentDwellTime The current time in TU that the transmitter shall operate on a single channel, as set by the MAC. The valid range is from 25 to 1000 milliseconds (both inclusive). A value of 65535 returned by the switch indicates that …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.14.1.5
ccdot11FHCurrentSet The current set of patterns the PHY LME is using to determine the hopping sequence. A value of 255 returned by the switch indicates that there is no value set for this variable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.14.1.6
ccdot11FHCurrentPattern The current pattern the PHY LME is using to determine the hop sequence. A value of 255 returned by the switch indicates that there is no value set for this variable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.14.1.7
ccdot11FHCurrentIndex The current index value the PHY LME is using the determine the CurrentChannelNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.388.6.2.14.1.8

A table for adding and removing WLANs

ccAPPolicyAddRemWLANEntry row .1.3.6.1.4.1.388.6.2.16.2.1

A table for adding and removing WLANs. Select/Unselect and WLAN for a mapping. The second index is the mapping.
1 as its value indicates addition/removal of a WLAN to/from an AP100 (4BSS-4ESS mapping).
2 as its value …

Indexes

ccAPPolicyIndex ccAPPolicyDeviceType

Column	Syntax	OID
ccAPPolicyDeviceType The type of mapping to/from which WLANs will be selected/unselected.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.388.6.2.16.2.1.1
ccAPPolicyAddWLANdeprecated Add a WLAN to this particular APPolicy and device. The format for entering the input is <existing Wlan,bandwidth>, where the sum of all bandwidth for this AP policy and Device Type should be less than or equal to 100…	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.16.2.1.2
ccAPPolicyRemWLANdeprecated Remove a WLAN from this particular APPolicy and device. Note:Default AP Policy cannot be edited	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.16.2.1.3
ccAPPolicySelectWLAN Select a WLAN for this mapping. The WLAN should already be added to this Access Port Policy for mapping. (4BSS-4ESS) :Four WLANs can be selected, if full unselect a existing WLAN before selectin…	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.16.2.1.4
ccAPPolicyUnselectWLAN UnSelect a WLAN for this mapping. The WLAN should already have been selected for this mapping. WLAN can be unselected for (4BSS-4ESS) and (1BSS-1ESS) mapping only.	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.16.2.1.5

A table for setting attributes of a wlan for a particular mapping for a Access Port Policy.

ccAPPolicyWLANEntry row .1.3.6.1.4.1.388.6.2.16.3.1

This table allows Get/Set attributes of a WLAN for a mapping for a particular AP policy.
First index is a AP Policy, Second index is the Mapping
1 indicates mapping to/from an AP100 (4BSS-4ESS mapping).
2 indicates map…

Indexes

ccAPPolicyIndex ccAPPolicyDeviceType ccAPPolicyWLANIndex

Column	Syntax	OID
ccAPPolicyWLANIndex The index of this particular WLAN.	Integer32 Constraints: range: 1-200	.1.3.6.1.4.1.388.6.2.16.3.1.1
ccAPPolicyWLAN Name of this particular WLAN which belongs to this APPolicy and this devicetype.	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.16.3.1.2
ccAPPolicyWLANBW The bandwidth allocated to this particular WLAN, which belongs to this APPolicy and this devicetype. Bandwidth of an FH port is 100% by default, and any attempt to set the bandwidth of an FH port results in an error.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.16.3.1.3
ccAPPolicyWLANNP The Network Policy which belongs to this particular WLAN, which belongs to this APPolicy. WLAN must already be configured for this AP Policy to set the Network Policy. SETting of Network Policy takes effect across all…	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.388.6.2.16.3.1.4
ccAPPolicyWLANBSS The BSS of this particular WLAN, which belongs to this APPolicy and this devicetype. BSS ID for AP 100, FHSS, AP200a is set to 1 by default and cannot be modifed. BSS ID of AP200b can be set from 1 through 4.	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.388.6.2.16.3.1.5

A table to GET/SET the primary wlan property of a particular bss and device type

ccAPPolicyBSSEntry row .1.3.6.1.4.1.388.6.2.16.4.1

This table will GET/SET the primary wlan property 'per APPolicy, per devicetype,per BSS.
ccAPPolicyIndex and ccDeviceType are defined earlier. ccAPPolicyBSS is the current BSS whose
primary WLAN is being GET/SET.
1 ind…

Indexes

ccAPPolicyIndex ccAPPolicyDeviceType ccAPPolicyBSS

Column	Syntax	OID
ccAPPolicyBSS The BSS for which the primary wlan property needs to be get/set	OctetString Constraints: range: 1-10	.1.3.6.1.4.1.388.6.2.16.4.1.1
ccAPPolicyPrimaryWLAN The primary wlan property for this particular APPolicy, per device type and per BSS, the WLAN marked as primary should already be added as a wlan into this policy. Primary WLAN cannot be set for any device except for …	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.16.4.1.2

A list of LAN descriptors.
          
Note:This Feature is VPN dependent feature hence
if vpnsupport is not enabled then the walk over
this table will not return anything and the set
operation over any OID under this table will return 
an error message- No creation.

ccFWLANEntry row .1.3.6.1.4.1.388.6.2.17.1

A LAN descriptor.

Indexes

ccEPPIndex

Column	Syntax	OID
ccLANIndex The Index for the LAN descriptor.	Integer32 Constraints: range: 0-200	.1.3.6.1.4.1.388.6.2.17.1.1
ccLANName LAN name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.17.1.2
ccLANDesc LAN description.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.388.6.2.17.1.3
ccLANNATCount The number of NAT entries attached to a LAN.	Integer32 Constraints: range: 0-200	.1.3.6.1.4.1.388.6.2.17.1.4
ccLANAddNAT Create a new NAT entry for this LAN. Syntax: <RemoteRealIP,LocalNatIP> OR <RemoteRealIP,LocalNatIP,NumberOfEntries> The agent will execute the appropriate code depending on the number …	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.17.1.5
ccLANRemNAT Remove one NAT entry from this LAN. Syntax: <RemoteRealIP,LocalNatIP> OR <RemoteRealIP,LocalNatIP,NumberOfEntries> The agent will execute the appropriate code depending o…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.17.1.6
ccLANEp LAN Ethernet Port. Enter an ethernet port number. Valid port numbers are 1 and 2 (for the two physical ethernet ports) as well as 3 (for a virtual VPN port connection). 0 as a port number removes Ethernet Port.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.388.6.2.17.1.7
ccLANNp Network policy associated with this LAN. Enter either the name of an existing network policy, or enter 'remove' to set the current value to blank.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.388.6.2.17.1.8
ccLANPfAllow Port Filter for this LAN. Valid input values are https ,http ,ftp and telnet .The input values are case sensitive. Only one value can be set at a time.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.17.1.9
ccLANPfDeny Port Filter for this LAN. Valid input values are https ,http ,ftp and telnet and web. Only one value can be given at a time.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.2.17.1.10

A list of LAN NAT Entries.  This is a
dual-index table, NAT entries for all
LANs are displayed.  A single entry of
0.0.0.0 for a LAN means that LAN has
no NAT entries.
          
Note:This Feature is VPN dependent feature hence
if vpnsupport is not enabled then the walk over
this table will not return anything and the set
operation over any OID under this table will return 
an error message- No creation.

ccFWLANNATEntry row .1.3.6.1.4.1.388.6.2.18.1

A LAN descriptor.

Indexes

ccEPPIndex ccLANNATIndex

Column	Syntax	OID
ccLANNATIndex The Index for the NAT entry.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.18.1.1
ccLANNATRemoteRealIP The Remote Real IP address in a NAT translation.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.388.6.2.18.1.2
ccLANNATLocalNatIP The Local NAT IP address in a NAT translation.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.388.6.2.18.1.3

Display current network routing table.

ccRouteEntry row .1.3.6.1.4.1.388.6.2.19.1

A Route entry.

Indexes

ccRouteIndex

Column	Syntax	OID
ccRouteIndex The Index for the Route entry.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.19.1.1
ccRouteDest The Destination for the Route entry.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.19.1.2
ccRouteGateway The Gateway for the Route entry.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.19.1.3
ccRouteFlags The Flags for the Route entry. These are standard 'netstat' flags, including (but not limited to): C - Generate new routes on use G - Destination requires forwarding by intermediary H - Hos…	OctetString Constraints: range: 1-10	.1.3.6.1.4.1.388.6.2.19.1.4
ccRouteRefs The number of references to the Route entry.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.19.1.5
ccRouteUse The Use count for the Route entry.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.19.1.6
ccRouteInterface The Interface for the Route entry.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.19.1.7
ccRouteGenMask The netmask for the Route entry	OctetString	.1.3.6.1.4.1.388.6.2.19.1.8

A table of DHCP IP Ranges for Ethernet 1.

ccDhcp1IPRangeEntry row .1.3.6.1.4.1.388.6.2.23.11.1

A DHCP IP Range entry.

Indexes

ccDhcp1RangeIndex

Column	Syntax	OID
ccDhcp1RangeIndex An integer index for ccDhcp1IPRangeTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.23.11.1.1
ccDhcp1RangeStartIP The DHCP IP Range Start IP Address.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.11.1.2
ccDhcp1RangeEndIP The DHCP IP Range End IP Address.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.11.1.3

A table of DHCP Static Entries for Ethernet 1.

ccDhcp1StaticIPEntry row .1.3.6.1.4.1.388.6.2.23.14.1

A DHCP Static IP entry.

Indexes

ccDhcp1StaticIPIndex

Column	Syntax	OID
ccDhcp1StaticIPIndex An integer index for ccDhcp2StaticIPTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.23.14.1.1
ccDhcp1StaticIP The DHCP Static Entry IP Address.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.14.1.2
ccDhcp1StaticMac The DHCP Static Entry MAC Address.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.14.1.3
ccDhcp1StaticHost The DHCP Static Entry host name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.14.1.4

A table of DHCP Options for Ethernet 1.

ccDhcp1OptionEntry row .1.3.6.1.4.1.388.6.2.23.17.1

A DHCP Option entry.

Indexes

ccDhcp1OptionIndex

Column	Syntax	OID
ccDhcp1OptionIndex An integer index for ccDhcp1OptionTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.23.17.1.1
ccDhcp1OptionName The DHCP Option name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.17.1.2
ccDhcp1OptionCode The DHCP Option Code.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.17.1.3
ccDhcp1OptionType The DHCP Option type.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.17.1.4
ccDhcp1OptionValue The DHCP option value.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.17.1.5

A table of DHCP Leases for Ethernet 1.

ccDhcp1LeasesEntry row .1.3.6.1.4.1.388.6.2.23.20.1

A DHCP lease entry.

Indexes

ccDhcp1LeaseIndex

Column	Syntax	OID
ccDhcp1LeaseIndex An integer index for ccDhcpLeaseTable1.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.23.20.1.1
ccDhcp1LeaseIP The DHCP lease IP address assigned to MU.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.20.1.2
ccDhcp1LeaseMac The DHCP lease MAC address for MU.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.20.1.3
ccDhcp1LeaseStartTime The DHCP lease start time.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.20.1.4
ccDhcp1LeaseEndTime The DHCP lease expiration time.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.23.20.1.5

A table of DHCP IP Ranges for Ethernet 2.

ccDhcp2IPRangeEntry row .1.3.6.1.4.1.388.6.2.24.11.1

A DHCP IP Range entry.

Indexes

ccDhcp2RangeIndex

Column	Syntax	OID
ccDhcp2RangeIndex An integer index for ccDhcp1IPRangeTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.24.11.1.1
ccDhcp2RangeStartIP The DHCP IP Range Start IP Address.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.11.1.2
ccDhcp2RangeEndIP The DHCP IP Range End IP Address.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.11.1.3

A table of DHCP Static Entries for Ethernet 2.

ccDhcp2StaticIPEntry row .1.3.6.1.4.1.388.6.2.24.14.1

A DHCP Static IP entry.

Indexes

ccDhcp2StaticIPIndex

Column	Syntax	OID
ccDhcp2StaticIPIndex An integer index for ccDhcp2StaticIPTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.24.14.1.1
ccDhcp2StaticIP The DHCP Static Entry IP Address.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.14.1.2
ccDhcp2StaticMac The DHCP Static Entry MAC Address.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.14.1.3
ccDhcp2StaticHost The DHCP Static Entry host name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.14.1.4

A table of DHCP Options for Ethernet 2.

ccDhcp2OptionEntry row .1.3.6.1.4.1.388.6.2.24.17.1

A DHCP Option entry.

Indexes

ccDhcp2OptionIndex

Column	Syntax	OID
ccDhcp2OptionIndex An integer index for ccDhcp2OptionTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.24.17.1.1
ccDhcp2OptionName The DHCP Option name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.17.1.2
ccDhcp2OptionCode The DHCP Option Code.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.17.1.3
ccDhcp2OptionType The DHCP Option type.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.17.1.4
ccDhcp2OptionValue The DHCP option value.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.17.1.5

A table of DHCP Leases for Ethernet 2.

ccDhcp2LeasesEntry row .1.3.6.1.4.1.388.6.2.24.20.1

A DHCP lease entry.

Indexes

ccDhcp1LeaseIndex

Column	Syntax	OID
ccDhcp2LeaseIndex An integer index for ccDhcp2LeaseTable.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.388.6.2.24.20.1.1
ccDhcp2LeaseIP The DHCP lease IP address assigned to MU.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.20.1.2
ccDhcp2LeaseMac The DHCP lease MAC address for MU.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.20.1.3
ccDhcp2LeaseStartTime The DHCP lease start time.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.20.1.4
ccDhcp2LeaseEndTime The DHCP lease expiration time.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.2.24.20.1.5

User information table entries.

ccUserEntry row .1.3.6.1.4.1.388.6.3.21.1

User Information entries.

Indexes

ccUserIndex

Column	Syntax	OID
ccUserID The user name. Cannot change the user id, but can achieve the same goal through removing and recreating a new user with a different name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.388.6.3.21.1.1
ccUserFullName The full name of the user. The Maximum length of the User name can be 20 characters. Note that the following characters cannot be part of User Name field - ',&,#,space and double quotes.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.388.6.3.21.1.2
ccUserPwd The user login password to access Wireless Switch services. The Maximum length of the Password is 20 characters. Note that the following characters cannot be part of the password field - ',&,#,\,space and double quote…	OctetStringr/w Constraints: range: 6-20	.1.3.6.1.4.1.388.6.3.21.1.3
ccUserAdminRightdeprecated Setting this object to the value <true(1)> gives the user admin rights, <false(2)> takes away the admin rights from the user.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.21.1.4
ccUserProfileMgmtRight Setting this object to the value <true(1)> gives the user Profile Management rights, <false(2)> takes away the Profile Management rights from the user.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.21.1.5
ccUserSysAdminRight Setting this object to the value <true(1)> gives the user Sys-Admin rights, <false(2)> takes away the Sys-Admin rights from the user.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.21.1.6
ccUserSNMPAdminRight Setting this object to the value <true(1)> gives the user SNMP- Admin rights, <false(2)> takes away the SNMP-Admin rights from the user.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.21.1.7
ccUserSecurityAdminRight Setting this object to the value <true(1)> gives the user Security- Admin rights, <false(2)> takes away the Security-Admin rights from the user.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.21.1.8
ccUserIndex The index of the user table.	Integer32 Constraints: range: 1-200	.1.3.6.1.4.1.388.6.3.21.1.10

A list of WLAN Object entries.

ccWLANEntry row .1.3.6.1.4.1.388.6.3.22.1

A WLAN Object entry.

Indexes

ccWLANIndex

Column	Syntax	OID
ccWLANIndex The index for this WLAN object.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.388.6.3.22.1.1
ccWLANName The WLAN object name. The Maximum length of the WLAN Name can be 50 characters. Note that the following characters cannot be part of WLAN Name field - ',.,\,&,# and double quotes.	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.3.22.1.2
ccESSID The ESSID for the interface.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.3.22.1.3
ccSecurity A security Policy to be used by this WLAN. If your Network Manager/MIB Browser displays an error message, it is likely that the security policy being added is invalid. To find out what the problem could be with this pa…	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.388.6.3.22.1.4
ccACLEnabled Enable or Disable ACL feature.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.22.1.5
ccMaxMus The maximum number of MUs supported by this WLAN.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.388.6.3.22.1.14
ccKerberosAuthName The name used for authenticating to a Kerberos Server.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.3.22.1.15
ccKerberosAuthPass The password for authenticating to a Kerberos Server. The minimum length of a password to 6 characters.	OctetStringr/w Constraints: range: 6-32	.1.3.6.1.4.1.388.6.3.22.1.16
ccWLANACL The ACL used by this WLAN. For removing the ACL from this WLAN, just input an empty string.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.388.6.3.22.1.17
ccWLANIsAuthenticated Tells whether the WLAN is authenticated or not.	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.22.1.18
ccWLANMUTraffic Changes the results of an MU to MU commmunication. 0 indicates that MU to MU traffic is allowed, 1 indicates that it is not allowed and 2 indicates that all MU to MU traffic is dropped.	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.388.6.3.22.1.19
ccWLANSecuredBeacon 'true' indicates that beacons need to be secured, while 'false' allows them to be unsecured.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.22.1.20
ccWLANCurrentMU The current number of MUs on this WLAN	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.388.6.3.22.1.21
ccWLANNetMask The Network Mask for the subnet.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.388.6.3.22.1.22
ccWLANDefaultRoute The IP Address of the default route.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.388.6.3.22.1.23
ccWLANBCMC11A WLAN broadcast/multicast encryption type on 802.11a radios.	EncrType Type Values: 0 unknown 1 open 2 wep40 4 wep104 8 keyguard 16 tkip 32 aesCcmp	.1.3.6.1.4.1.388.6.3.22.1.24
ccWLANBCMC11B WLAN broadcast/multicast encryption type on 802.11b radios.	EncrType Type Values: 0 unknown 1 open 2 wep40 4 wep104 8 keyguard 16 tkip 32 aesCcmp	.1.3.6.1.4.1.388.6.3.22.1.25
ccWLANBCMCFH WLAN broadcast/multicast encryption type on FH radios.	EncrType Type Values: 0 unknown 1 open 2 wep40 4 wep104 8 keyguard 16 tkip 32 aesCcmp	.1.3.6.1.4.1.388.6.3.22.1.26
ccBroadcastEss Enable (true)/Disable (false) Broadcast ESS feature for the WLAN. Broadcast ESS feature implies that a probe request containing a zero length SSID will be allowed to associate to the particular SSID that is designated …	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.388.6.3.22.1.27
ccWLANDesc The description of the WLAN. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# and double quotes.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.388.6.3.22.1.28
ccWlanWMEEnable Description. Enable/Disable of WME for WLAN.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.3.22.1.29
ccWlanWMEProfile Description. WME Profile for WLan	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.388.6.3.22.1.30