SYMBOL-AP-MIB Table View

Column Syntax OID

dot1xAuthBackendAuthState

The Port number associated with this Port.

Integer32

Constraints:
range: 1-200

.1.3.6.1.4.1.388.11.3.3.1.1.1.1

dot1xPaeState

The current value of the Authenticator PAE state machine.

Enumeration

Enumerated Values:

1	intialize
2	disconnected
3	connecting
4	authenticating
5	authenticated
6	aborting
7	held
8	forceAuth
9	forceUnauth

.1.3.6.1.4.1.388.11.3.3.1.1.1.2

The current state of the Backend Authentication state machine.

Enumeration

Enumerated Values:

1	request
2	response
3	success
4	fail
5	timeout
6	idle
7	initialize

.1.3.6.1.4.1.388.11.3.3.1.1.1.3

dot1xAuthAdminControlledDirections

The current value of the administrative controlled
directions parameter for the Port.

dot1xAuthOperControlledDirections

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.3.1.1.1.4

The current value of the operational controlled
directions parameter for the Port.

dot1xAuthAuthControlledPortStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.3.1.1.1.5

The current value of the controlled Port
status parameter for the Port.

dot1xAuthAuthControlledPortControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.3.1.1.1.6

The current value of the controlled Port
control parameter for the Port.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.3.1.1.1.7

dot1xAuthQuietPeriod

The value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.1.1.8

dot1xAuthTxPeriod

The value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.1.1.9

dot1xAuthSuppTimeout

The value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.1.1.10

dot1xAuthServerTimeout

The value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.1.1.11

dot1xAuthMaxReq

The value of the maxReq constant currently in use by
the Backend Authentication state machine.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.1.1.12

dot1xAuthReAuthPeriod

The value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.1.1.13

dot1xAuthReAuthEnabled

The enable/disable control used by the Reauthentication
Timer state machine

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.3.1.1.1.14

dot1xAuthKeyTxEnabled

The value of the keyTransmissionEnabled constant
currently in use by the Authenticator PAE state
machine.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.3.1.1.1.15

dot1xAuthStatsTable

table

.1.3.6.1.4.1.388.11.3.3.1.2 · 1 row entry · 12 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk dot1xAuthStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::dot1xAuthStatsTable'

A table that contains the statistics objects for the
Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself.

dot1xAuthStatsEntry row .1.3.6.1.4.1.388.11.3.3.1.2.1

The statistics information for an Authenticator PAE.

Indexes

Column	Syntax	OID
dot1xAuthEapolFramesRx The number of valid EAPOL frames of any type that have been received by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.1`
dot1xAuthEapolFramesTx The number of EAPOL frames of any type that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.2`
dot1xAuthEapolStartFramesRx The number of EAPOL Start frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.3`
dot1xAuthEapolLogoffFramesRx The number of EAPOL Logoff frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.4`
dot1xAuthEapolRespIdFramesRx The number of EAP Resp/Id frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.5`
dot1xAuthEapolRespFramesRx The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.6`
dot1xAuthEapolReqIdFramesTx The number of EAP Req/Id frames that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.7`
dot1xAuthEapolReqFramesTx The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.8`
dot1xAuthInvalidEapolFramesRx The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.9`
dot1xAuthEapLengthErrorFramesRx The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.10`
dot1xAuthLastEapolFrameVersion The protocol version number carried in the most recently received EAPOL frame.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.388.11.3.3.1.2.1.11`
dot1xAuthLastEapolFrameSource The source MAC address carried in the most recently received EAPOL frame.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.388.11.3.3.1.2.1.12`

dot1xAuthDiagTable

table

.1.3.6.1.4.1.388.11.3.3.1.3 · 1 row entry · 18 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk dot1xAuthDiagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::dot1xAuthDiagTable'

A table that contains the diagnostics objects for the
Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself.

dot1xAuthDiagEntry row .1.3.6.1.4.1.388.11.3.3.1.3.1

The diagnostics information for an Authenticator PAE.

Indexes

Column	Syntax	OID
dot1xAuthEntersConnecting Counts the number of times that the state machine transitions to the CONNECTING state from any other state.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.1`
dot1xAuthEapLogoffsWhileConnecting Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.2`
dot1xAuthEntersAuthenticating Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.3`
dot1xAuthAuthSuccessWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuc…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.4`
dot1xAuthAuthTimeoutsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.5`
dot1xAuthAuthFailWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.6`
dot1xAuthAuthReauthsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.7`
dot1xAuthAuthEapStartsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.8`
dot1xAuthAuthEapLogoffWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.9`
dot1xAuthAuthReauthsWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.10`
dot1xAuthAuthEapStartsWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.11`
dot1xAuthAuthEapLogoffWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.12`
dot1xAuthBackendResponses Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator at…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.13`
dot1xAuthBackendAccessChallenges Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentica…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.14`
dot1xAuthBackendOtherRequestsToSupplicant Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). In…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.15`
dot1xAuthBackendNonNakResponsesFromSupplicant Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.16`
dot1xAuthBackendAuthSuccesses Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplican…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.17`
dot1xAuthBackendAuthFails Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has …	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.3.1.3.1.18`

dot1xAuthSessionStatsTable

table

.1.3.6.1.4.1.388.11.3.3.1.4 · 1 row entry · 9 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk dot1xAuthSessionStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::dot1xAuthSessionStatsTable'

A table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself.

dot1xAuthSessionStatsEntry row .1.3.6.1.4.1.388.11.3.3.1.4.1

The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
th…

Indexes

Column Syntax OID

dot1xAuthSessionOctetsRx

The number of octets received in user data
frames on this Port during the session.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.4.1.1

dot1xAuthSessionOctetsTx

The number of octets transmitted in user data
frames on this Port during the session.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.4.1.2

dot1xAuthSessionFramesRx

The number of user data frames received
on this Port during the session.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.4.1.3

dot1xAuthSessionFramesTx

The number of user data frames transmitted
on this Port during the session.

dot1xAuthSessionAuthenticMethod

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.4.1.4

dot1xAuthSessionId

A unique identifier for the session, in the
form of a printable ASCII string of at least
three characters.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.388.11.3.3.1.4.1.5

The authentication method used to establish the
session.

Enumeration

Enumerated Values:

1	remoteAuthServer
2	localAuthServer

.1.3.6.1.4.1.388.11.3.3.1.4.1.6

dot1xAuthSessionTime

The duration of the session in seconds.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.3.1.4.1.7

dot1xAuthSessionTerminateCause

The reason for the session termination.

Enumeration

Enumerated Values:

1	supplicantLogoff
2	portFailure
3	supplicantRestart
4	reauthFailed
5	authControlForceUnauth
6	portReInit
7	portAdminDisabled
999	notTerminatedYet

.1.3.6.1.4.1.388.11.3.3.1.4.1.8

dot1xAuthSessionUserName

The User-Name representing the identity of the
Supplicant PAE.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.388.11.3.3.1.4.1.9

apRadioSettingsTable

table

.1.3.6.1.4.1.388.11.3.4.1.1 · 1 row entry · 43 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioSettingsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioSettingsTable'

Use apRadioSettingsTable to view and set the properties
of the radios.

apRadioSettingsEntry row .1.3.6.1.4.1.388.11.3.4.1.1.1

Indexes

Column Syntax OID

Simple index.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.388.11.3.4.1.1.1.1

apRadioSettingsEnable

Row enable.

apRadioSettingsPointersToWlans

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.1.1.2

apRadioSettingsBand

In a system that contains only 1 radio, Radio 1
can be configured for 802.11b/g or 802.11a.

In a system that contains 2 radios, Radio 1 will
be configured for 802.11b/g and Radio 2 will be
configured for …

Enumerationr/w

Enumerated Values:

1	aRadio
2	bgRadio

.1.3.6.1.4.1.388.11.3.4.1.1.1.3

This scalar points to multiple WLANs that use this radio.

apRadioSettingsMacAddress

Type Values:

0	null
1	referToEntry001
2	referToEntry002
3	referToEntry003
4	referToEntry004
5	referToEntry005
6	referToEntry006
7	referToEntry007
8	referToEntry008
9	referToEntry009
10	referToEntry010
11	referToEntry011
12	referToEntry012
13	referToEntry013
14	referToEntry014
15	referToEntry015
16	referToEntry016
17	referToEntry017
18	referToEntry018
19	referToEntry019
20	referToEntry020
21	referToEntry021
22	referToEntry022
23	referToEntry023
24	referToEntry024
25	referToEntry025
26	referToEntry026
27	referToEntry027
28	referToEntry028
29	referToEntry029
30	referToEntry030
31	referToEntry031
32	referToEntry032
33	referToEntry033
34	referToEntry034
35	referToEntry035
36	referToEntry036
37	referToEntry037
38	referToEntry038
39	referToEntry039
40	referToEntry040
41	referToEntry041
42	referToEntry042
43	referToEntry043
44	referToEntry044
45	referToEntry045
46	referToEntry046
47	referToEntry047
48	referToEntry048
49	referToEntry049
50	referToEntry050
51	referToEntry051
52	referToEntry052
53	referToEntry053
54	referToEntry054
55	referToEntry055
56	referToEntry056
57	referToEntry057
58	referToEntry058
59	referToEntry059
60	referToEntry060
61	referToEntry061
62	referToEntry062
63	referToEntry063

.1.3.6.1.4.1.388.11.3.4.1.1.1.4

apRadioSettingsName

Name of Radio.

Note that 'radio802dt11a' means an 802.11a standard radio that uses the
5GHz band, and, 'radio802dt11bg' means an 802.11b and 802.11g standards
radio that use the 2.4 GHz band.
An 802.11n…

Enumeration

Enumerated Values:

1	radio802dt11a
2	radio802dt11bg
3	radio802dt11n2400MHz
4	radio802dt11n5000MHz

.1.3.6.1.4.1.388.11.3.4.1.1.1.5

MAC address of the radio.

apRadioSettingsShortPreamble

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.4.1.1.1.6

apRadioSettingsAntenna

The antenna diversity setting for the radio.

Note that this setting does not apply for an 802.11n radio.

Enumerationr/w

Enumerated Values:

1	fullDiversity
2	primaryOnly
3	secondaryOnly

.1.3.6.1.4.1.388.11.3.4.1.1.1.7

Enable support for Short Preamble when MUs
associate with the Access Point. Enabling Short
Preamble may cause incompatibility with some older
clients.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.1.1.8

apRadioSettingsRtsThresh

The Request To Send(RTS) threshold(in bytes) for use
by the radio for the WLAN.

apRadioSettingsBasicRates

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.9

apRadioSettingsBeaconInt

Specify a beacon interval in units of 1,000
microseconds (K-us). This is a multiple of the DTIM
(apRadioSettingDtimPrd) value, for example,
100 : 10.

Integer32r/w

Constraints:
range: 50-200

.1.3.6.1.4.1.388.11.3.4.1.1.1.10

apRadioSettingsDtimPrd

Specify a period for the Delivery Traffic Indication
Message (DTIM). This is a divisor of the beacon
interval (in milliseconds), for example, 10 : 100.

Note that this object's status is current for 802…

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.388.11.3.4.1.1.1.11

List of basic rates for the radio.

Note that this setting does not apply for an 802.11n radio.

Bitsr/w

Enumerated Values:

0	null
1	rate1Mb
2	rate2Mb
3	rate5pt5Mb
4	rate6Mb
5	rate9Mb
6	rate11Mb
7	rate12Mb
8	rate18Mb
9	rate22Mb
10	rate24Mb
11	rate36Mb
12	rate48Mb
13	rate54Mb

.1.3.6.1.4.1.388.11.3.4.1.1.1.12

apRadioSettingsSupportedRates

List of supported rates for the radio.

Bitsr/w

Enumerated Values:

0	null
1	rate1Mb
2	rate2Mb
3	rate5pt5Mb
4	rate6Mb
5	rate9Mb
6	rate11Mb
7	rate12Mb
8	rate18Mb
9	rate22Mb
10	rate24Mb
11	rate36Mb
12	rate48Mb
13	rate54Mb

.1.3.6.1.4.1.388.11.3.4.1.1.1.13

apRadioSettingsBGMode

Radio mode.

Note that this setting does not apply for an 802.11n radio.
Please use the object apRadioNSettingsMode under apRadioNSettingsTable
for 802.11n radios.

Enumerationr/w

Enumerated Values:

1	modeBandG
2	modeG
3	modeB

.1.3.6.1.4.1.388.11.3.4.1.1.1.14

apRadioSettingsBackgroundModeobsolete

This QOS parameter is used by the AP for the
Background access category.

apRadioSettingsBackgroundCwMin

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.1.1.15

This QOS parameter is used by the AP for the
Background access category.

apRadioSettingsBackgroundCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.16

This QOS parameter is used by the AP for the
Background access category.

apRadioSettingsBackgroundAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.17

This QOS parameter is used by the AP for the
Background access category.

apRadioSettingsBackgroundTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.18

This QOS parameter is used by the AP for the
Background access category.

apRadioSettingsBackgroundTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.19

This QOS parameter is used by the AP for the
Background access category.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.20

apRadioSettingsBestEffortModeobsolete

This QOS parameter is used by the AP for the
Best Effort access category.

apRadioSettingsBestEffortCwMin

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.1.1.21

This QOS parameter is used by the AP for the
Best Effort access category.

apRadioSettingsBestEffortCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.22

This QOS parameter is used by the AP for the
Best Effort access category.

apRadioSettingsBestEffortAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.23

This QOS parameter is used by the AP for the
Best Effort access category.

apRadioSettingsBestEffortTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.24

This QOS parameter is used by the AP for the
Best Effort access category.

apRadioSettingsBestEffortTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.25

This QOS parameter is used by the AP for the
Best Effort access category.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.26

apRadioSettingsVideoModeobsolete

This QOS parameter is used by the AP for the
Video access category.

apRadioSettingsVideoCwMin

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.1.1.27

This QOS parameter is used by the AP for the
Video access category.

apRadioSettingsVideoCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.28

This QOS parameter is used by the AP for the
Video access category.

apRadioSettingsVideoAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.29

This QOS parameter is used by the AP for the
Video access category.

apRadioSettingsVideoTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.30

This QOS parameter is used by the AP for the
Video access category.

apRadioSettingsVideoTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.31

This QOS parameter is used by the AP for the
Video access category.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.32

apRadioSettingsVoiceModeobsolete

This QOS parameter is used by the AP for the
Voice access category.

apRadioSettingsVoiceCwMin

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.1.1.33

This QOS parameter is used by the AP for the
Voice access category.

apRadioSettingsVoiceCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.34

This QOS parameter is used by the AP for the
Voice access category.

apRadioSettingsVoiceAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.35

This QOS parameter is used by the AP for the
Voice access category.

apRadioSettingsVoiceTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.36

This QOS parameter is used by the AP for the
Voice access category.

apRadioSettingsVoiceTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.37

This QOS parameter is used by the AP for the
Voice access category.

apRadioSettingsE2BMapMessage

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.1.1.38

Global ESS to BSS mapping status message.

apRadioSettingsERPProtectionStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.1.1.1.39

Whether ERP Protection is ON or OFF.

apRadioSettingsWMMQosParam

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.1.1.40

Pre-Programmed WMM QOS Parameters.
manual - Modify parameters
wifi11agn - WiFi 11a/11g/11n defaults
wifi11b - WiFi 11b defaults
default11agn - Symbol 11a/11g/11n defaults
default11b - Symbol 11b defaults
voice11agn - …

Enumerationr/w

Enumerated Values:

1	manual
2	wifi11agn
3	wifi11b
4	default11agn
5	default11b
6	voice11agn
7	voice11b

.1.3.6.1.4.1.388.11.3.4.1.1.1.41

apRadioSettingsQBSSChannelBeaconInt

Channel Utilization Beacon Intervals for QBSS Load Element (802.11e)

Integer32r/w

Constraints:
range: 10-200

.1.3.6.1.4.1.388.11.3.4.1.1.1.42

apRadioSettingsQBSSLoadElementMode

Enable/Disable QBSS Load Element.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.388.11.3.4.1.1.1.43

apRadioCfgTable

table

.1.3.6.1.4.1.388.11.3.4.1.2 · 1 row entry · 15 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioCfgTable'

Use apRadioCfgTable to view and set the radio 
properties of the Access Points.
          
          
The process can be broken down into the following steps:
1. Set apRadioCfgReset to TRUE.
2. Set apRadioCfgDesPlacement
3. Get apRadioCfgPosChannel
4. Set apRadioCfgDesChannel
5. Get apRadioCfgPosPowerLevel
6. Set apRadioCfgDesPowerLevel
7. Get apRadioCfgPowerInMW
8. Set and pull progress of apRadioCfgSet 
9. Validate the configuration has been set by getting
     apRadioCfgPlacement
     apRadioCfgChannel
     apRadioCfgPowerLevel

apRadioCfgEntry row .1.3.6.1.4.1.388.11.3.4.1.2.1

Indexes

Column Syntax OID

apRadioCfgChannelMode

Channel Mode for the Radio.
The user is allowed to enter the apRadioDesChannel
value only if the Channel Mode is Set to userSelect.

The values autoSelect40(4) and uniformSpreading40(5) are
applicable onl…

Enumerationr/w

Enumerated Values:

1	userSelect
2	autoSelect
3	uniformSpreading
4	autoSelect40
5	uniformSpreading40

.1.3.6.1.4.1.388.11.3.4.1.2.1.1

apRadioCfgDesPlacement

The desired placement for radio.

Enumerationr/w

Enumerated Values:

1	indoor
2	outdoor

.1.3.6.1.4.1.388.11.3.4.1.2.1.2

apRadioCfgPosChannel

The possible channels that can be set when placement =
apRadioCfgDesPlacement.

Bits

Enumerated Values:

0	null
1	bchannel01
2	bchannel02
3	bchannel03
4	bchannel04
5	bchannel05
6	bchannel06
7	bchannel07
8	bchannel08
9	bchannel09
10	bchannel10
11	bchannel11
12	bchannel12
13	bchannel13
14	bchannel14
15	achannel36
16	achannel40
17	achannel44
18	achannel48
19	achannel52
20	achannel56
21	achannel60
22	achannel64
23	achannel149
24	achannel153
25	achannel157
26	achannel161
27	achannel165

.1.3.6.1.4.1.388.11.3.4.1.2.1.3

apRadioCfgDesChannel

The desired channel for radio.

Please do not use this object for an access point
that supports 802.11n radio.
Use apRadioNCfgDesChannel instead.

Enumerationr/w

Enumerated Values:

0	null
1	bchannel01
2	bchannel02
3	bchannel03
4	bchannel04
5	bchannel05
6	bchannel06
7	bchannel07
8	bchannel08
9	bchannel09
10	bchannel10
11	bchannel11
12	bchannel12
13	bchannel13
14	bchannel14
36	achannel36
40	achannel40
44	achannel44
48	achannel48
52	achannel52
56	achannel56
60	achannel60
64	achannel64
149	achannel149
153	achannel153
157	achannel157
161	achannel161
165	achannel165

.1.3.6.1.4.1.388.11.3.4.1.2.1.4

apRadioCfgPosPowerLevel

The max possible power level (dBm) that can be set when
channel= apRadioCfgDesChannel. The range is 4 to 20 dBm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.2.1.5

apRadioCfgDesPowerLevel

The desired power level (dBm) for radio.

The following power levels are available
4dBm=3mW, 5dBm=3mW, 6dBm=4mW,
7dBm=5mW, 8dBm=6mW, 9dBm=8mW,
10dBm=10mW, 11dBm=13mW, 12dBm=16mW,
13dBm=20mW, 14dBm…

Integer32r/w

Constraints:
range: 4-20

.1.3.6.1.4.1.388.11.3.4.1.2.1.6

apRadioCfgDesPowerInMW

apRadioCfgDesPowerLevel in mW.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.2.1.7

apRadioCfgSet

Validate values in apRadioCfgDes_ fields. If it is
a valid combination, configure the switch with this
combination and set apRadioCfg_ to these values.

DoActionShowProgressr/w

Type Values:

1	doActionRightNow
2	idleState

.1.3.6.1.4.1.388.11.3.4.1.2.1.8

apRadioCfgReset

Reset the following OIDs.

apRadioCfgDesPlacement
apRadioCfgDesChannel
apRadioCfgDesPowerLevel
apRadioCfgPosChannel
apRadioCfgPosPowerLevel
apRadioCfgPowerInMW

DoActionShowProgressr/w

Type Values:

1	doActionRightNow
2	idleState

.1.3.6.1.4.1.388.11.3.4.1.2.1.9

apRadioCfgPlacement

The placement configuration for radio.

Enumeration

Enumerated Values:

1	indoor
2	outdoor

.1.3.6.1.4.1.388.11.3.4.1.2.1.10

apRadioCfgChannel

The channel configuration for radio.

Enumeration

Enumerated Values:

0	null
1	bchannel01
2	bchannel02
3	bchannel03
4	bchannel04
5	bchannel05
6	bchannel06
7	bchannel07
8	bchannel08
9	bchannel09
10	bchannel10
11	bchannel11
36	achannel36
40	achannel40
44	achannel44
48	achannel48
52	achannel52
56	achannel56
60	achannel60
64	achannel64
149	achannel149
153	achannel153
157	achannel157
161	achannel161
165	achannel165

.1.3.6.1.4.1.388.11.3.4.1.2.1.11

apRadioCfgPowerLevel

The power level (dBm) configuration for radio.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.2.1.12

apRadioCfgPowerInMW

apRadioCfgPowerLevel in mW.

apRadioCfgExceptionChannel

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.2.1.13

apRadioCfgRfFunction

WLAN or WIPS sensor operation mode for the Radio.

Enumerationr/w

Enumerated Values:

1	wlan
2	wips

.1.3.6.1.4.1.388.11.3.4.1.2.1.14

The channels that will be excluded from scanning when channelMode is autoSelect.

Bitsr/w

Enumerated Values:

0	null
1	bchannel01
2	bchannel02
3	bchannel03
4	bchannel04
5	bchannel05
6	bchannel06
7	bchannel07
8	bchannel08
9	bchannel09
10	bchannel10
11	bchannel11
12	bchannel12
13	bchannel13
14	bchannel14
15	achannel36
16	achannel40
17	achannel44
18	achannel48
19	achannel52
20	achannel56
21	achannel60
22	achannel64
23	achannel149
24	achannel153
25	achannel157
26	achannel161
27	achannel165

.1.3.6.1.4.1.388.11.3.4.1.2.1.15

apRadioWlanBssTable

table

.1.3.6.1.4.1.388.11.3.4.1.3 · 1 row entry · 1 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioWlanBssTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioWlanBssTable'

Table of BSSIDs mapped to WLANs.

apRadioWlanBssEntry row .1.3.6.1.4.1.388.11.3.4.1.3.1

Indexes

apRadioSettingsIndex apWlanIndex

Column	Syntax	OID
apRadioWlanBssid BSSID assigned to this particular WLAN.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.1.3.1.1`

apRadioBssTable

table

.1.3.6.1.4.1.388.11.3.4.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioBssTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioBssTable'

Use apRadioBssTable to view and set the properties
of the Bss's.

apRadioBssEntry row .1.3.6.1.4.1.388.11.3.4.1.4.1

Indexes

apRadioSettingsIndex apRadioBssIndex

Column	Syntax	OID
apRadioBssIndex	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.388.11.3.4.1.4.1.1`
apRadioBssPrimaryWlan Primary WLAN used by the AP to send beacons.	Integer32r/w Constraints: `range: 0-16`	`.1.3.6.1.4.1.388.11.3.4.1.4.1.2`
apRadioBssDtimPrd Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. Note that BSS DTIM period is not supported for 80…	Integer32r/w Constraints: `range: 1-50`	`.1.3.6.1.4.1.388.11.3.4.1.4.1.3`

apRadioE2BMapStatusTable

table

.1.3.6.1.4.1.388.11.3.4.1.5 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioE2BMapStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioE2BMapStatusTable'

The table describes the ESS to BSS mapping status.

apRadioE2BMapStatusEntry row .1.3.6.1.4.1.388.11.3.4.1.5.1

Indexes

apRadioSettingsIndex apWlanIndex

Column Syntax OID

apRadioE2BMapStatusBcMcEncCipher

Broadcast/Mulitcast Encryption cipher
based on the ESS to BSS mapping.

Enumeration

Enumerated Values:

1	open
2	wep64
3	wep128
4	keyguard
5	wpaTkip
6	wpa2Ccmp

.1.3.6.1.4.1.388.11.3.4.1.5.1.1

apRadioE2BMapStatus

ESS to BSS map status.

Enumeration

Enumerated Values:

1	good
2	warning
3	error

.1.3.6.1.4.1.388.11.3.4.1.5.1.2

apRadioE2BMapStatusMessage

ESS to BSS map status message.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.1.5.1.3

apRadioMeshTable

table

.1.3.6.1.4.1.388.11.3.4.1.6.1 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioMeshTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioMeshTable'

Table for MESH configuration for Radio.

apRadioMeshEntry row .1.3.6.1.4.1.388.11.3.4.1.6.1.1

Indexes

apRadioMeshBaseBridgeMode

Column Syntax OID

MESH base bridge mode for radio.

apRadioMeshClientBridgeMode

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.6.1.1.1

apRadioMeshMaxClients

Maximum number of MESH client bridges.

Integer32r/w

Constraints:
range: 1-12

.1.3.6.1.4.1.388.11.3.4.1.6.1.1.2

MESH client bridge mode for radio.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.6.1.1.3

apRadioMeshWlanPtr

MESH client bridge WLAN.
For the value 0 there is no WLAN assigned
for Client Bridge connection.

apRadioMeshConnAutoSelect

Constraints:
range: 0-16

.1.3.6.1.4.1.388.11.3.4.1.6.1.1.4

Enable/Disable the MESH Auto Connection Select Mode.

apRadioSettingsIndex apRadioMeshAvailableConnIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.6.1.1.5

apRadioMeshTimeout

Mesh Timeout Status.

Enumerationr/w

Enumerated Values:

0	disabled
1	uplinkDetect
2	enabled

.1.3.6.1.4.1.388.11.3.4.1.6.1.1.6

apRadioMeshTimeoutValue

If Mesh is not connected after Timeout period (in seconds),
stop the AP from sending beacons.

Integer32r/w

Constraints:
range: 45-65535

.1.3.6.1.4.1.388.11.3.4.1.6.1.1.7

apRadioMeshAvailableConnTable

table

.1.3.6.1.4.1.388.11.3.4.1.6.2 · 1 row entry · 4 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioMeshAvailableConnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioMeshAvailableConnTable'

Table of Available Base Bridge MESH connections.

apRadioMeshAvailableConnEntry row .1.3.6.1.4.1.388.11.3.4.1.6.2.1

Indexes

Column	Syntax	OID
apRadioMeshAvailableConnIndex Simple Index.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.388.11.3.4.1.6.2.1.1`
apRadioMeshAvailableConnMac Mac Address of Available Base Bridge.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.388.11.3.4.1.6.2.1.2`
apRadioMeshAvailableConnChannel Channel of Available Base Bridge.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.1.6.2.1.3`
apRadioMeshAvailableConnRssi RSSI value of Available Base Bridge.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.1.6.2.1.4`

apRadioMeshPreferredConnTable

table

.1.3.6.1.4.1.388.11.3.4.1.6.3 · 1 row entry · 4 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioMeshPreferredConnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioMeshPreferredConnTable'

Table of Preferred Base Bridge MESH connections.

apRadioMeshPreferredConnEntry row .1.3.6.1.4.1.388.11.3.4.1.6.3.1

Indexes

apRadioSettingsIndex apRadioMeshPreferredConnIndex

Column Syntax OID

apRadioMeshPreferredConnIndex

Simple Index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.4.1.6.3.1.1

apRadioMeshPreferredConnPriority

Preferred Base Bridge Priority.

apRadioMeshPreferredConnMac

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.6.3.1.2

Preferred Base Bridge MAC Address.

apRadioMeshPreferredConnRowStatus

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.4.1.6.3.1.3

Row Status used to add or delete entries.

apRadioSettingsIndex apWlanIndex

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.1.6.3.1.4

apRadioWlanBandwidthTable

table

.1.3.6.1.4.1.388.11.3.4.1.7 · 1 row entry · 1 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioWlanBandwidthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioWlanBandwidthTable'

Table of Radio Wlan Bandwidth management.

apRadioWlanBandwidthEntry row .1.3.6.1.4.1.388.11.3.4.1.7.1

Indexes

Column	Syntax	OID
apRadioWlanWeight The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.1.7.1.1`

apRadioNSettingsTable

table

.1.3.6.1.4.1.388.11.3.4.1.8 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioNSettingsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioNSettingsTable'

This table adds 802.11n specific settings for an 'n' radio in 
addition to the common settings under apRadioSettingsTable.

apRadioNSettingsEntry row .1.3.6.1.4.1.388.11.3.4.1.8.1

An 802.11n radio settings entry.

Indexes

apRadioNSettingsHTProtectionStatus

Column Syntax OID

apRadioNSettingsMode

The modes available for an 802.11n radio depend on the radio band.
For 5.0 GHz (11an), the modes are:

modeA
modeN5000MHz
modeAandN

For 2.4 GHz (11bgn), the …

Enumerationr/w

Enumerated Values:

1	modeA
2	modeB
3	modeG
4	modeN2400MHz
5	modeN5000MHz
6	modeAandN
7	modeBandG
8	modeGandN
9	modeBGandN

.1.3.6.1.4.1.388.11.3.4.1.8.1.1

This is a new setting for 802.11n radios that indicates
the HT Protection Status. The possible values are:

Pure HT (1)
non-HT STA on Channel (2)
HT with 20 MHz-only STA (3)
…

Enumeration

Enumerated Values:

1	pureHt
2	nonHtStaOnChannel
3	htWith20MHzOnlySta
4	nonHtStaAssociated

.1.3.6.1.4.1.388.11.3.4.1.8.1.2

apRadioNSettingsBasicRates

For basic rate the following options are available:
(1) 1 and 2 Mbps
(2) 1, 2, 5.5 and 11 Mbps
(3) 1, 2, 5.5, 11 and 6, 12, 24 Mbps
(4) 6, 12 and 24 Mbps
(5) MCS 0-7
(6) 6, 12 and 24 Mbps and MCS 0-7
(7) 1, 2, 5.5, 11 a…

Enumerationr/w

Enumerated Values:

1	rate1and2Mbps
2	rate1and2and5point5and11Mbps
3	rate1and2and5point5and11and6and12and24Mbps
4	rate6and12and24Mbps
5	rateMCS0to7
6	rate6and12and24MbpsandMCS0to7
7	rate1and2and5point5and11and6and12and24MbpsandMCS0to7

.1.3.6.1.4.1.388.11.3.4.1.8.1.3

apRadioNCfgTable

table

.1.3.6.1.4.1.388.11.3.4.1.9 · 1 row entry · 12 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioNCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioNCfgTable'

Description.

apRadioNCfgEntry row .1.3.6.1.4.1.388.11.3.4.1.9.1

Description.

Indexes

Column Syntax OID

apRadioNCfgPosChannel

The possible channels that can be set when placement =
apRadioCfgDesPlacement

Bits

Enumerated Values:

0	null
1	bgnChannel1
2	bgnChannel2
3	bgnChannel3
4	bgnChannel4
5	bgnChannel5
6	bgnChannel6
7	bgnChannel7
8	bgnChannel8
9	bgnChannel9
10	bgnChannel10
11	bgnChannel11
12	bgnChannel12
13	bgnChannel13
14	bgnChannel14
15	anChannel36
16	anChannel40
17	anChannel44
18	anChannel48
19	anChannel52
20	anChannel56
21	anChannel60
22	anChannel64
23	anChannel100
24	anChannel104
25	anChannel108
26	anChannel112
27	anChannel116
28	anChannel120
29	anChannel124
30	anChannel128
31	anChannel132
32	anChannel136
33	anChannel140
34	anChannel149
35	anChannel153
36	anChannel157
37	anChannel161
38	anChannel165

.1.3.6.1.4.1.388.11.3.4.1.9.1.1

apRadioNCfgDesChannel

The desired channel for the 'n' radio.

When changing 802.11n channels, make changes in the following order:
1) Width (apRadioNCfgChannelWidth)
2) Offset (apRadioNCfgChannelOffset)
3) Channel (apRadioNCfgD…

AllowedChannelsr/w

Type Values:

1	channel1
2	channel2
3	channel3
4	channel4
5	channel5
6	channel6
7	channel7
8	channel8
9	channel9
10	channel10
11	channel11
12	channel12
13	channel13
14	channel14
36	channel36
40	channel40
44	channel44
48	channel48
52	channel52
56	channel56
60	channel60
64	channel64
100	channel100
104	channel104
108	channel108
112	channel112
116	channel116
120	channel120
124	channel124
128	channel128
132	channel132
136	channel136
140	channel140
149	channel149
153	channel153
157	channel157
161	channel161
165	channel165

.1.3.6.1.4.1.388.11.3.4.1.9.1.2

apRadioNCfgChannel

The channel configuration for the 'n' radio.

apRadioNCfgAmsduAggregationMaxRecvSize

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.9.1.3

apRadioNCfgChannelWidth

When this value is set to twentyMhz, the AP works on
20MHz mode for both transmit and receive operations.

dynamic: The 20/40 MHz operation is a dynamic feature in which
the AP can receive packets from c…

Enumerationr/w

Enumerated Values:

1	twentyMHz
2	dynamic

.1.3.6.1.4.1.388.11.3.4.1.9.1.4

The AP will always be enabled to receive AMSDU frames.

The user will be able to set the AMSDU limit to 3839 bytes.
This value will be advertised in the HT Capabilities
element.

The user m…

bytesEnumeration

Enumerated Values:

3839

size3839

.1.3.6.1.4.1.388.11.3.4.1.9.1.5

apRadioNCfgAmsduTransmitEnabled

When set to TRUE it enables the transmission of AMSDU frames.
Setting it to FALSE disable AMSDU transmission.
This object is not supported in the current release, hence
it will not be returned during a get/get-next/wal…

apRadioNCfgAmpduAggregationMaxRecvSize

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.9.1.6

This value is used to tell other stations the maximum length AMPDU
that they can send. The allowed values are:
0 bytes (special case, to disable AMPDU rx-limit).
8191 bytes
16383 bytes
32767 bytes
65535 …

bytesEnumerationr/w

Enumerated Values:

0	size0
8191	size8191
16383	size16383
32767	size32767
65535	size65535

.1.3.6.1.4.1.388.11.3.4.1.9.1.7

apRadioNCfgAmpduAggregationDensity

Used to configure the AMPDU density which controls how close
together the MPDU?s are within the AMPDU.

The choices are: 0 (none), 1/4 usec, 1/2 usec, 1 usec, 2 usec,
4 usec and 8 usec.

Si…

nanosecondsEnumerationr/w

Enumerated Values:

0	zero
250	onefourth
500	onehalf
1000	one
2000	two
4000	four
8000	eight

.1.3.6.1.4.1.388.11.3.4.1.9.1.8

apRadioNCfgAmpduTransmitSizeLimit

This is a threshold that controls when the AP will setup a
Block ACK agreement with a client to begin aggregating,
that is, sending A-MPDU frames, to that client.
It takes a range from 0-65535 bytes.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.388.11.3.4.1.9.1.9

apRadioNCfgShortGuardInterval

This is a boolean. The 802.11n AP has an option to configure
short guard interval(SGI).

The possible values of guard interval are 400ns or 800ns.

When the user turns SGI on, both 400ns an…

apRadioNCfgAmpduTransmitEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.9.1.10

When set to TRUE it enables the transmission of AMPDU frames.
Setting it to FALSE disable AMPDU transmission.

apRadioSettingsIndex apRadioNMcsRateIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.9.1.11

apRadioNCfgChannelOffset

The channel offset.

When changing 802.11n channels, make changes in the following order:
1) Width (apRadioNCfgChannelWidth)
2) Offset (apRadioNCfgChannelOffset)
3) Channel (apRadioNCfgDesChannel)

Enumerationr/w

Enumerated Values:

1	none
2	above
3	below

.1.3.6.1.4.1.388.11.3.4.1.9.1.12

apRadioNMcsRateTable

table

.1.3.6.1.4.1.388.11.3.4.1.10 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadioNMcsRateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadioNMcsRateTable'

The AP with the 802.11n radio supports modulation coding schemes 
(MCS) 0-15. This maps to the table entries 1-16.
To the user, this is part of the Set Rates function.

apRadioNMcsRateEntry row .1.3.6.1.4.1.388.11.3.4.1.10.1

An entry which gives the MCS supported by an 'n' radio in the AP.

Indexes

Column Syntax OID

apRadioNMcsRateIndex

MCS index, from 1-16, corresponding to schemes 0-15.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.4.1.10.1.1

apRadioNMcsRate20MHzChanSgiDisabled

Rate on 20MHz channel with SGI disabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.10.1.2

apRadioNMcsRate20MHzChanSgiEnableddeprecated

Rate on 20MHz channel with SGI enabled

apRadioNMcsRate40MHzChanSgiDisabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.10.1.3

Rate on 40MHz channel with SGI disabled

apRadioNMcsRate40MHzChanSgiEnabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.10.1.4

Rate on 40MHz channel with SGI enabled.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.1.10.1.5

apRadioNMcsRateType

Whether this MCS rate is basic or supported.

Enumerationr/w

Enumerated Values:

1	basic
2	supported

.1.3.6.1.4.1.388.11.3.4.1.10.1.6

apRadioNMcsRateEnabled

Whether this MCS is disabled (false), or, enabled (true) for this 'n' radio.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.1.10.1.7

apWlanTable

table

.1.3.6.1.4.1.388.11.3.4.2.1 · 1 row entry · 21 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanTable'

Table of wireless LANs configured on the AP.

apWlanEntry row .1.3.6.1.4.1.388.11.3.4.2.1.1

Indexes

Column Syntax OID

Simple index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.4.2.1.1.1

apWlanName

Name of the WLAN.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.2.1.1.2

apWlanEssid

ESSID of the WLAN.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.2.1.1.3

apWlanUseRadio

Use either 802.11a radio or 802.11b/g radio, or, for 802.11n radios,
select the frequency band i.e. 2.4 GHz or 5.0 GHz.

Enumerationr/w

Enumerated Values:

0	noneBand
1	bgRadio
2	aRadio
3	bothBand
4	nRadio2400MHz
5	nRadio5000MHz

.1.3.6.1.4.1.388.11.3.4.2.1.1.4

apWlanMaxMus

Maximum number of MU associations is allowed for the
WLAN. The total number of MUs for the entire AP cannot
exceed 127.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.1.1.5

apWlanAclPolicy

Point to the ACL policy used for this WLAN.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.1.1.6

apWlanSecurityPolicy

Point to the Security policy used for this WLAN.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.1.1.7

apWlanQosPolicy

Point to the QOS policy used for this WLAN.

apWlanAuthKerberosUsername

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.1.1.8

Kerberos Username which is the same as the ESSID
if the WLAN uses Kerberos Authentication

apWlanAuthKerberosPassword

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.2.1.1.9

Kerberos Password for authenticating the AP to the KDC.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.1.1.10

apWlanDisallowMuToMu

Set to true to prohibit MU-to-MU communication.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.1.1.11

apWlanUseSecureBeacon

Enable the Secure Beacon checkbox to disallow the
Access Point from broadcasting an ESSID in its
beacons. This is a safeguard to prevent intruders
from tapping into the WLAN. Consider this security
measure for a pri…

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.1.1.12

apWlanAnswerBroadcastEss

Answer broadcast ESS.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.1.1.13

apWlanWeightobsolete

The weight to be used when QoS for all WLANs
is set to weighted-round-robin.

Note that the sum of all weights across all
WLANs need not total 100.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.1.1.14

apWlanVlanMode

VLAN mode can either Dynamic or Static.

Enumerationr/w

Enumerated Values:

1	modeDynamic
2	modeStatic

.1.3.6.1.4.1.388.11.3.4.2.1.1.15

apWlanVlanId

Point to the VLAN id corresponding to WLAN.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.1.1.16

apWlanSubnet

The LAN to which a WLAN is mapped.

Enumerationr/w

Enumerated Values:

1	lan1
2	lan2

.1.3.6.1.4.1.388.11.3.4.2.1.1.17

apWlanClientBackHaul

Enable/Disable MESH Client Backhaul on this WLAN.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.1.1.18

apWlanHotspot

Enable or Disable Hotspot functionality on this WLAN.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.1.1.19

apWlanEnable

Row enable/disable.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.1.1.20

apWlanMuIdleTimeout

Maximum MU idle time in minutes.

minutesInteger32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.388.11.3.4.2.1.1.21

apWlanSecPolicyTable

table

.1.3.6.1.4.1.388.11.3.4.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanSecPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanSecPolicyTable'

Security Policy that can be used by different WLANs.

apWlanSecPolicyEntry row .1.3.6.1.4.1.388.11.3.4.2.2.1

Indexes

Column Syntax OID

Simple index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.4.2.2.1.1

apWlanSecPolicyName

Name of security policy.

apWlanSecPolicyAuthentication

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.2.2.1.2

If auth802dot1xEap, additional EAP settings for this
WLAN will be used from the matching entry in the
apWlanAuthEapTable.

Likewise, if authKerberos, use the settings in the
matching entry in the apWlanAut…

Enumerationr/w

Enumerated Values:

1	authNone
2	auth802dot1xEap
3	authKerberos

.1.3.6.1.4.1.388.11.3.4.2.2.1.3

apWlanSecPolicyEncryption

If cryptoWep40 or cryptoWep128, additional WEP
settings for this WLAN will be used from the matching
entry in the apWlanCryptoWepTable.

Likewise, if cryptoWpaTkip, use the settings in the
matching entry …

Enumerationr/w

Enumerated Values:

1	cryptoNone
2	cryptoWep40
3	cryptoWep128
4	cryptoKeyguardMcm
5	cryptoWpaTkip
6	cryptoCcmp

.1.3.6.1.4.1.388.11.3.4.2.2.1.4

apWlanSecPolicyPointerToWlan

Points to the WLAN which have this
particular security policy.

Type Values:

0	null
1	referToEntry001
2	referToEntry002
3	referToEntry003
4	referToEntry004
5	referToEntry005
6	referToEntry006
7	referToEntry007
8	referToEntry008
9	referToEntry009
10	referToEntry010
11	referToEntry011
12	referToEntry012
13	referToEntry013
14	referToEntry014
15	referToEntry015
16	referToEntry016
17	referToEntry017
18	referToEntry018
19	referToEntry019
20	referToEntry020
21	referToEntry021
22	referToEntry022
23	referToEntry023
24	referToEntry024
25	referToEntry025
26	referToEntry026
27	referToEntry027
28	referToEntry028
29	referToEntry029
30	referToEntry030
31	referToEntry031
32	referToEntry032
33	referToEntry033
34	referToEntry034
35	referToEntry035
36	referToEntry036
37	referToEntry037
38	referToEntry038
39	referToEntry039
40	referToEntry040
41	referToEntry041
42	referToEntry042
43	referToEntry043
44	referToEntry044
45	referToEntry045
46	referToEntry046
47	referToEntry047
48	referToEntry048
49	referToEntry049
50	referToEntry050
51	referToEntry051
52	referToEntry052
53	referToEntry053
54	referToEntry054
55	referToEntry055
56	referToEntry056
57	referToEntry057
58	referToEntry058
59	referToEntry059
60	referToEntry060
61	referToEntry061
62	referToEntry062
63	referToEntry063

.1.3.6.1.4.1.388.11.3.4.2.2.1.5

apWlanSecPolicyRowStatus

Row Status used for Creation or Deletion.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.2.2.1.6

apWlanAuthEapTable

table

.1.3.6.1.4.1.388.11.3.4.2.3.1 · 1 row entry · 23 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanAuthEapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanAuthEapTable'

Table of EAP authentication settings
for each Security Policy using this method.

apWlanAuthEapEntry row .1.3.6.1.4.1.388.11.3.4.2.3.1.1

Indexes

apWlanAuthEapReauthenticationEnable

Column Syntax OID

Enable reauthentication.

apWlanAuthEapReauthenticationPeriod

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.1

Reauthentication period.

secondsUnsigned32r/w

Constraints:
range: 30-9999

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.2

apWlanAuthEapReauthenticationMaxRetries

Reauthentication max retries.

Unsigned32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.3

apWlanAuthEapRadius1Server

IP address of the primary RADIUS server.
Use 127.0.0.1 to use the Local Radius Server on the AP5131.

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.4

apWlanAuthEapRadius1Port

Port number of the primary RADIUS server.

apWlanAuthEapRadius1SharedSecret

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.5

Shared secret of the primary RADIUS server.

apWlanAuthEapRadius2Server

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.6

IP address of the secondary RADIUS server.
Use 127.0.0.1 to use the Local Radius Server on the AP5131.

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.7

apWlanAuthEapRadius2Port

Port number of the secondary RADIUS server.

apWlanAuthEapRadius2SharedSecret

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.8

Shared secret of the secondary RADIUS server.

apWlanAuthEapMuQuietPeriod

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.9

MU quiet period.

secondsUnsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.10

apWlanAuthEapMuTimeout

MU timeout.

secondsUnsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.11

apWlanAuthEapMuTxPeriod

MU Tx period.

secondsUnsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.12

apWlanAuthEapMuMaxRetries

MU max retries.

Unsigned32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.13

apWlanAuthEapServerTimeout

Server timeout.

secondsUnsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.14

apWlanAuthEapServerMaxRetries

Server max retries.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.15

apWlanAuthEapRadiusAcctMode

Radius Accounting Mode.

apWlanAuthEapRadiusAcctMuTimeout

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.16

Radius Accounting MU Timeout value

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.17

apWlanAuthEapRadiusAcctMuRetries

Radius Accounting Number of MU Retries.

Unsigned32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.18

apWlanAuthEapSyslogMode

Syslogging Mode.

apWlanAuthEapSyslogServerIp

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.19

Syslog Server IP Address.

apWlanAuthEapRadiusExtAcctServer

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.20

External Radius Accounting Server IP Address.

apWlanAuthEapRadiusExtPort

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.21

Port number of the external RADIUS server.

apWlanAuthEapRadiusExtSharedSecret

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.22

Shared secret of the external RADIUS server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.3.1.1.23

apWlanAuthKerberosTable

table

.1.3.6.1.4.1.388.11.3.4.2.3.2 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanAuthKerberosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanAuthKerberosTable'

Table of Kerberos authentication settings
for each Security Policy using this method.

apWlanAuthKerberosEntry row .1.3.6.1.4.1.388.11.3.4.2.3.2.1

Indexes

Column	Syntax	OID
apWlanAuthKerberosRealmName Realm name.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.388.11.3.4.2.3.2.1.1`
apWlanAuthKerberosKdcServerIp1 Primary KDC server IP addr.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.4.2.3.2.1.2`
apWlanAuthKerberosKdcPort1 Primary KDC port.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.4.2.3.2.1.3`
apWlanAuthKerberosKdcServerIp2 Backup KDC server IP addr.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.4.2.3.2.1.4`
apWlanAuthKerberosKdcPort2 Backup KDC port.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.4.2.3.2.1.5`
apWlanAuthKerberosKdcServerIpR Remote KDC server IP addr.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.4.2.3.2.1.6`
apWlanAuthKerberosKdcPortR Remote KDC port.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.4.2.3.2.1.7`

apWlanCryptoWepTable

table

.1.3.6.1.4.1.388.11.3.4.2.4.1 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanCryptoWepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanCryptoWepTable'

Table of WEP encryption settings
for each Security Policy using this method.

apWlanCryptoWepEntry row .1.3.6.1.4.1.388.11.3.4.2.4.1.1

Indexes

Column Syntax OID

apWlanCryptoWepPassKey

Pass key.

If this value is written, the four WepKey1..4 will
be overwritten.

Constraints:
range: 4-32

.1.3.6.1.4.1.388.11.3.4.2.4.1.1.1

apWlanCryptoWepKey1

WEP key #1

exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key).

OctetStringr/w

Constraints:
range: 0-13

.1.3.6.1.4.1.388.11.3.4.2.4.1.1.2

apWlanCryptoWepKey2

WEP key #2

exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key).

OctetStringr/w

Constraints:
range: 0-13

.1.3.6.1.4.1.388.11.3.4.2.4.1.1.3

apWlanCryptoWepKey3

WEP key #3

exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key).

OctetStringr/w

Constraints:
range: 0-13

.1.3.6.1.4.1.388.11.3.4.2.4.1.1.4

apWlanCryptoWepKey4

WEP key #4

exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key).

OctetStringr/w

Constraints:
range: 0-13

.1.3.6.1.4.1.388.11.3.4.2.4.1.1.5

apWlanCryptoWepKeyToUse

Specifies which WEP key to use.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.388.11.3.4.2.4.1.1.6

apWlanCryptoWepMixedMode

Allow WEP128 clients

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.4.1.1.7

apWlanCryptoTkipTable

table

.1.3.6.1.4.1.388.11.3.4.2.4.2 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanCryptoTkipTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanCryptoTkipTable'

Table of WPA-TKIP encryption settings
for each Security Policy using this method.

apWlanCryptoTkipEntry row .1.3.6.1.4.1.388.11.3.4.2.4.2.1

Indexes

apWlanCryptoTkipBcastKeyRotation

Column Syntax OID

Use broadcast key rotation.

apWlanCryptoTkipKeyRotationInterval

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.4.2.1.1

Broadcast key rotation, (if enabled), occurs every
this many seconds.

secondsUnsigned32r/w

Constraints:
range: 30-604800

.1.3.6.1.4.1.388.11.3.4.2.4.2.1.2

apWlanCryptoTkipKeyToUse

Specifies whether to use ASCII Passphrase
or 256-bit Hex Key.

Enumerationr/w

Enumerated Values:

1	useAsciiPassphrase
2	use256bitKey

.1.3.6.1.4.1.388.11.3.4.2.4.2.1.3

apWlanCryptoTkipPassphrase

ASCII Passphrase.

OctetStringr/w

Constraints:
range: 8-63

.1.3.6.1.4.1.388.11.3.4.2.4.2.1.4

apWlanCryptoTkipKey

WPA/TKIP 256 bit Key.
No need to enter key if ASCII passphrase is entered.

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.388.11.3.4.2.4.2.1.5

apWlanCryptoTkipAllowWpa2Client

Allows WPA2 TKIP.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.388.11.3.4.2.4.2.1.6

apWlanCryptoTkipFastRoamPreAuth

Allows Pre-Authentication.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.388.11.3.4.2.4.2.1.7

apWlanCryptoCcmpTable

table

.1.3.6.1.4.1.388.11.3.4.2.4.3 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanCryptoCcmpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanCryptoCcmpTable'

Table of WPA2-CCMP encryption settings
for each Security Policy using this method.

apWlanCryptoCcmpEntry row .1.3.6.1.4.1.388.11.3.4.2.4.3.1

Indexes

apWlanCryptoCcmpBcastKeyRotation

Column Syntax OID

Use broadcast key rotation.

apWlanCryptoCcmpKeyRotationInterval

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.4.3.1.1

Broadcast key rotation, (if enabled), occurs every
this many seconds.

secondsUnsigned32r/w

Constraints:
range: 30-604800

.1.3.6.1.4.1.388.11.3.4.2.4.3.1.2

apWlanCryptoCcmpKeyToUse

Specifies whether to use ASCII Passphrase
or 256-bit Hex Key.

Enumerationr/w

Enumerated Values:

1	useAsciiPassphrase
2	use256bitKey

.1.3.6.1.4.1.388.11.3.4.2.4.3.1.3

apWlanCryptoCcmpPassphrase

ASCII Passphrase.

OctetStringr/w

Constraints:
range: 8-63

.1.3.6.1.4.1.388.11.3.4.2.4.3.1.4

apWlanCryptoCcmpKey

WPA2/CCMP 256 bit Key.
No need to enter key if ASCII passphrase is entered.

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.388.11.3.4.2.4.3.1.5

apWlanCryptoCcmpMixedMode

Allow WPA-TKIP clients

apWlanCryptoCcmpFastRoamPreAuth

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.4.3.1.6

Enabling this option enables a client associated with one
Access Point to carry out an 802.1x authentication with
another Access Point before it roams over to it. The Access Point
will cache the keying information of…

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.4.3.1.7

apWlanCryptoKeyguardTable

table

.1.3.6.1.4.1.388.11.3.4.2.4.4 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanCryptoKeyguardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanCryptoKeyguardTable'

Table of KeyGuard-MCM encryption settings
for each Security Policy using this method.

apWlanCryptoKeyguardEntry row .1.3.6.1.4.1.388.11.3.4.2.4.4.1

Indexes

apWlanCryptoKeyguardPassKey

Column Syntax OID

Pass key.

If this value is written, the four KeyguardKey1..4 will
be overwritten.

OctetStringr/w

Constraints:
range: 4-32

.1.3.6.1.4.1.388.11.3.4.2.4.4.1.1

apWlanCryptoKeyguardKey1

Key #1.

OctetStringr/w

Constraints:
range: 13-13

.1.3.6.1.4.1.388.11.3.4.2.4.4.1.2

apWlanCryptoKeyguardKey2

Key #2.

OctetStringr/w

Constraints:
range: 13-13

.1.3.6.1.4.1.388.11.3.4.2.4.4.1.3

apWlanCryptoKeyguardKey3

Key #3.

OctetStringr/w

Constraints:
range: 13-13

.1.3.6.1.4.1.388.11.3.4.2.4.4.1.4

apWlanCryptoKeyguardKey4

Key #4.

OctetStringr/w

Constraints:
range: 13-13

.1.3.6.1.4.1.388.11.3.4.2.4.4.1.5

apWlanCryptoKeyguardKeyToUse

Specifies which WEP key to use.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.388.11.3.4.2.4.4.1.6

apWlanCryptoKeyguardMixedMode

Allow WEP128 clients

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.4.4.1.7

apWlanMuAclPolicyTable

table

.1.3.6.1.4.1.388.11.3.4.2.5 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanMuAclPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanMuAclPolicyTable'

Access Control List that can be used by different WLANs.

apWlanMuAclPolicyEntry row .1.3.6.1.4.1.388.11.3.4.2.5.1

Indexes

apWlanMuAclPolicyIndex

Column Syntax OID

apWlanMuAclPolicyIndex

Simple index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.4.2.5.1.1

apWlanMuAclPolicyName

Name of the Access Control policy.

apWlanMuAclPolicyAccessMode

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.2.5.1.2

MUs match this policy can either be Allowed or
Denied association.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.4.2.5.1.3

apWlanMuAclPolicyPointerToWlan

Points to the WLAN which have this
particular MU Acl policy.

apWlanMuAclPolicyRowStatus

Type Values:

0	null
1	referToEntry001
2	referToEntry002
3	referToEntry003
4	referToEntry004
5	referToEntry005
6	referToEntry006
7	referToEntry007
8	referToEntry008
9	referToEntry009
10	referToEntry010
11	referToEntry011
12	referToEntry012
13	referToEntry013
14	referToEntry014
15	referToEntry015
16	referToEntry016
17	referToEntry017
18	referToEntry018
19	referToEntry019
20	referToEntry020
21	referToEntry021
22	referToEntry022
23	referToEntry023
24	referToEntry024
25	referToEntry025
26	referToEntry026
27	referToEntry027
28	referToEntry028
29	referToEntry029
30	referToEntry030
31	referToEntry031
32	referToEntry032
33	referToEntry033
34	referToEntry034
35	referToEntry035
36	referToEntry036
37	referToEntry037
38	referToEntry038
39	referToEntry039
40	referToEntry040
41	referToEntry041
42	referToEntry042
43	referToEntry043
44	referToEntry044
45	referToEntry045
46	referToEntry046
47	referToEntry047
48	referToEntry048
49	referToEntry049
50	referToEntry050
51	referToEntry051
52	referToEntry052
53	referToEntry053
54	referToEntry054
55	referToEntry055
56	referToEntry056
57	referToEntry057
58	referToEntry058
59	referToEntry059
60	referToEntry060
61	referToEntry061
62	referToEntry062
63	referToEntry063

.1.3.6.1.4.1.388.11.3.4.2.5.1.4

Row Status.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.2.5.1.5

apWlanMuAclTable

table

.1.3.6.1.4.1.388.11.3.4.2.6 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanMuAclTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanMuAclTable'

Table describing ACLs for allowing or denying,
(depending on default behavior for the WLAN
specified in apWlanMuAclPolicyTable), MU association with
each WLAN.

apWlanMuAclEntry row .1.3.6.1.4.1.388.11.3.4.2.6.1

Indexes

apWlanMuAclIndex

Column Syntax OID

apWlanMuAclIndex

Simple index.

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.388.11.3.4.2.6.1.1

apWlanMuAclStartingMac

Starting MAC address in a range of addresses.

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.4.2.6.1.2

apWlanMuAclEndingMac

Ending MAC address in a range of addresses.

apWlanMuAclPointerToAclPolicy

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.4.2.6.1.3

Pointer to the ACL policy that this row belongs.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.2.6.1.4

apWlanMuAclRowStatus

Row status.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.2.6.1.5

apWlanQosPolicyTable

table

.1.3.6.1.4.1.388.11.3.4.2.7 · 1 row entry · 29 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanQosPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanQosPolicyTable'

QoS Policy that can be used by different WLANs.

apWlanQosPolicyEntry row .1.3.6.1.4.1.388.11.3.4.2.7.1

Indexes

apWlanQosPolicyIndex

Column Syntax OID

apWlanQosPolicyIndex

Simple index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.4.2.7.1.1

apWlanQosPolicyName

Name of the QoS policy.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.2.7.1.2

apWlanEnableWMM

Enable WiFi Multimedia Extension support.

apWlanQosPolicyBackgroundCwMin

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.7.1.3

apWlanWMMQosParam

Enumerationr/w

Enumerated Values:

1	manual
2	wifi11agn
3	wifi11b
4	default11agn
5	default11b
6	voice11agn
7	voice11b

.1.3.6.1.4.1.388.11.3.4.2.7.1.4

This QoS parameter is to be used by the MU for the
Background access category.

apWlanQosPolicyBackgroundCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.5

This QoS parameter is to be used by the MU for the
Background access category.

apWlanQosPolicyBackgroundAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.6

This QoS parameter is to be used by the MU for the
Background access category.

apWlanQosPolicyBackgroundTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.7

This QoS parameter is to be used by the MU for the
Background access category.

apWlanQosPolicyBackgroundTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.8

This QoS parameter is to be used by the MU for the
Background access category.

apWlanQosPolicyBestEffortCwMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.9

This QoS parameter is to be used by the MU for the
Best Effort access category.

apWlanQosPolicyBestEffortCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.10

This QoS parameter is to be used by the MU for the
Best Effort access category.

apWlanQosPolicyBestEffortAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.11

This QoS parameter is to be used by the MU for the
Best Effort access category.

apWlanQosPolicyBestEffortTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.12

This QoS parameter is to be used by the MU for the
Best Effort access category.

apWlanQosPolicyBestEffortTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.13

This QoS parameter is to be used by the MU for the
Best Effort access category.

apWlanQosPolicyVideoCwMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.14

This QoS parameter is to be used by the MU for the
Video access category.

apWlanQosPolicyVideoCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.15

This QoS parameter is to be used by the MU for the
Video access category.

apWlanQosPolicyVideoAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.16

This QoS parameter is to be used by the MU for the
Video access category.

apWlanQosPolicyVideoTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.17

This QoS parameter is to be used by the MU for the
Video access category.

apWlanQosPolicyVideoTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.18

This QoS parameter is to be used by the MU for the
Video access category.

apWlanQosPolicyVoiceCwMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.19

This QoS parameter is to be used by the MU for the
Voice access category.

apWlanQosPolicyVoiceCwMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.20

This QoS parameter is to be used by the MU for the
Voice access category.

apWlanQosPolicyVoiceAifsn

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.21

This QoS parameter is to be used by the MU for the
Voice access category.

apWlanQosPolicyVoiceTxopsTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.22

This QoS parameter is to be used by the MU for the
Voice access category.

apWlanQosPolicyVoiceTxopsTimeInMS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.23

This QoS parameter is to be used by the MU for the
Voice access category.

apWlanVoicePrioritization

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.2.7.1.24

Support legacy voice prioritization.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.2.7.1.25

apWlanMulticastAddr1

Multicast address 1.

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.4.2.7.1.26

apWlanMulticastAddr2

Multicast address 2.

apWlanQosPolicyPointerToWlan

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.4.2.7.1.27

Points to the WLAN which have this
particular QOS policy.

Type Values:

0	null
1	referToEntry001
2	referToEntry002
3	referToEntry003
4	referToEntry004
5	referToEntry005
6	referToEntry006
7	referToEntry007
8	referToEntry008
9	referToEntry009
10	referToEntry010
11	referToEntry011
12	referToEntry012
13	referToEntry013
14	referToEntry014
15	referToEntry015
16	referToEntry016
17	referToEntry017
18	referToEntry018
19	referToEntry019
20	referToEntry020
21	referToEntry021
22	referToEntry022
23	referToEntry023
24	referToEntry024
25	referToEntry025
26	referToEntry026
27	referToEntry027
28	referToEntry028
29	referToEntry029
30	referToEntry030
31	referToEntry031
32	referToEntry032
33	referToEntry033
34	referToEntry034
35	referToEntry035
36	referToEntry036
37	referToEntry037
38	referToEntry038
39	referToEntry039
40	referToEntry040
41	referToEntry041
42	referToEntry042
43	referToEntry043
44	referToEntry044
45	referToEntry045
46	referToEntry046
47	referToEntry047
48	referToEntry048
49	referToEntry049
50	referToEntry050
51	referToEntry051
52	referToEntry052
53	referToEntry053
54	referToEntry054
55	referToEntry055
56	referToEntry056
57	referToEntry057
58	referToEntry058
59	referToEntry059
60	referToEntry060
61	referToEntry061
62	referToEntry062
63	referToEntry063

.1.3.6.1.4.1.388.11.3.4.2.7.1.28

apWlanQosPolicyRowStatus

Row Status.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.2.7.1.29

apWlanBwShareModeTable

table

.1.3.6.1.4.1.388.11.3.4.2.8 · 1 row entry · 1 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWlanBwShareModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWlanBwShareModeTable'

Description.

apWlanBwShareModeEntry row .1.3.6.1.4.1.388.11.3.4.2.8.1

Description.

Indexes

Column Syntax OID

apWlanBwShareMode

This variable configures the manner in which bandwidth is shared among the WLANs. Only in mode 'weightedRoundRobin' are the apRadioWlanWeight values for each Radio and WLAN used.

Enumerationr/w

Enumerated Values:

0	firstInFirstOut
1	roundRobin
2	weightedRoundRobin

.1.3.6.1.4.1.388.11.3.4.2.8.1.1

apHotSpotTable

table

.1.3.6.1.4.1.388.11.3.4.3.1 · 1 row entry · 18 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apHotSpotTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apHotSpotTable'

Table for Hotspot configuration.

apHotSpotEntry row .1.3.6.1.4.1.388.11.3.4.3.1.1

Indexes

apHotSpotExternalLoginPageUrl

Column Syntax OID

apHotSpotDefaultFileMode

Default File Mode for Login, Welcome and Fail Pages.

Enumerationr/w

Enumerated Values:

1	default
2	externalURL

.1.3.6.1.4.1.388.11.3.4.3.1.1.1

apHotSpotExternalWelomePageUrl

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.3.1.1.2

Welcome Page URL on external server.

apHotSpotExternalFailPageUrl

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.3.1.1.3

Fail Page URL on external server.

apHotSpotPriRadiusServerIp

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.3.1.1.4

IP Address of Primary Radius Server.
Use 127.0.0.1 to use the Local Radius Server on the AP5131.

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.3.1.1.5

apHotSpotPriRadiusPort

Port for Primary Radius Server.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.3.1.1.6

apHotSpotPriRadiusSecret

Shared Secret for Primary Radius Server.

apHotSpotSecRadiusServerIp

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.3.1.1.7

IP Address of Secondary Radius Server.
Use 127.0.0.1 to use the Local Radius Server on the AP5131.

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.3.1.1.8

apHotSpotSecRadiusPort

Port for Secondary Radius Server.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.3.1.1.9

apHotSpotSecRadiusSecret

Shared Secret for Secondary Radius Server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.3.1.1.10

apHotSpotRadiusAcctMode

Radius Accounting Mode.

apHotSpotRadiusAcctServerIp

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.3.1.1.11

External Accounting Radius Server.

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.3.1.1.12

apHotSpotRadiusAcctPort

Port for External Accounting Radius Server.

apHotSpotRadiusAcctSecret

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.3.1.1.13

Shared Secret for External Accounting Radius Server.

apHotSpotRadiusAcctTimeout

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.4.3.1.1.14

Radius Accounting Timeout value.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.388.11.3.4.3.1.1.15

apHotSpotRadiusAcctRetryCount

Radius Accounting Retry Count value.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.388.11.3.4.3.1.1.16

apHotSpotRadiusSessMode

Radius Session Timeout Mode (Applicable only for Internal Radius Server)

apHotSpotRadiusSessTimeout

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.3.1.1.17

Radius Session Timeout (Applicable only for Internal Radius Server)

apWlanIndex apHotSpotWhiteListIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.4.3.1.1.18

apHotSpotWhiteListTable

table

.1.3.6.1.4.1.388.11.3.4.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apHotSpotWhiteListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apHotSpotWhiteListTable'

Table of White List entires for HotSpot for the WLANs.

apHotSpotWhiteListEntry row .1.3.6.1.4.1.388.11.3.4.3.2.1

Indexes

Column Syntax OID

apHotSpotWhiteListIndex

Simple Index 1...10

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.388.11.3.4.3.2.1.1

apHotSpotWhiteListWalledGardenIp

IP Address of White List entries

apHotSpotWhiteListRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.3.2.1.2

Value to control row creation/deletion.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.3.2.1.3

apMuLocationingTable

table

.1.3.6.1.4.1.388.11.3.4.4.1.4 · 1 row entry · 6 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apMuLocationingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apMuLocationingTable'

The switch shall store the information received 
in the probe request messages in this table.

apMuLocationingEntry row .1.3.6.1.4.1.388.11.3.4.4.1.4.1

Description.

Indexes

apMuLocationingIndex

Column	Syntax	OID
apMuLocationingIndex Simple index.	Integer32 Constraints: `range: 1-2400`	`.1.3.6.1.4.1.388.11.3.4.4.1.4.1.1`
apMuLocationingMuMac MAC address of the MU.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.388.11.3.4.4.1.4.1.2`
apMuLocationingPortalMac MAC address of the Portal.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.388.11.3.4.4.1.4.1.3`
apMuLocationingSignalStrength Received Signal Strength in dBm by the Heard Portal.	dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.4.1.4.1.4`
apMuLocationingHeardChannel Describes on which channel probe is heard.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.4.1.4.1.5`
apMuLocationingHeardTime Describes the time when this probe is heard.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.4.4.1.4.1.6`

apMuLocationingAddEntryToTable

table

.1.3.6.1.4.1.388.11.3.4.4.1.5 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apMuLocationingAddEntryToTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apMuLocationingAddEntryToTable'

The switch shall provide option to append information 
to apMuLocationingTable.

apMuLocationingAddEntryToEntry row .1.3.6.1.4.1.388.11.3.4.4.1.5.1

Description.

Indexes

apMuLocationingIndex

Column	Syntax	OID
apMuLocationingAddMuMac MAC address of the MU.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.388.11.3.4.4.1.5.1.1`
apMuLocationingAddPortalMac MAC address of the Portal.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.388.11.3.4.4.1.5.1.2`
apMuLocationingAddSignalStrength Received Signal Strength in dBm by the Heard Portal.	dBmSNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.4.1.5.1.3`
apMuLocationingAddHeardChannel Describes on which channel probe is heard.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.4.4.1.5.1.4`
apMuLocationingAddHeardTime Describes the time when this probe is heard.	SNMPv2-SMITimeTicksr/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.4.4.1.5.1.5`

apIpFilterPolicyTable

table

.1.3.6.1.4.1.388.11.3.4.5.1 · 1 row entry · 13 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apIpFilterPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apIpFilterPolicyTable'

Table of Global IP Filter Policies

apIpFilterPolicyEntry row .1.3.6.1.4.1.388.11.3.4.5.1.1

Indexes

apIpFilterPolicyIndex

Column Syntax OID

apIpFilterPolicyIndex

Simple Index

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.388.11.3.4.5.1.1.1

apIpFilterPolicyName

IP Filter Policy Name.
It has to be unique for every policy.

apIpFilterPolicyStartPort

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.5.1.1.2

apIpFilterPolicyProtocol

IP Filter Policy Protocol Number.

Enumerationr/w

Enumerated Values:

1	icmp
2	igmp
4	ipip
6	tcp
8	egp
12	pup
17	udp
22	idp
41	ipv6
46	rsvp
47	gre
50	esp
51	ah
103	pim
108	comp
255	rawip
256	all

.1.3.6.1.4.1.388.11.3.4.5.1.1.3

IP Filter Policy Starting Port Number

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.388.11.3.4.5.1.1.4

apIpFilterPolicyEndPort

IP Filter Policy Ending Port Number

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.388.11.3.4.5.1.1.5

apIpFilterPolicySrcStartIp

IP Filter Policy Source Start IP Address.

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.5.1.1.6

apIpFilterPolicySrcEndIp

IP Filter Policy Source End IP Address.

apIpFilterPolicyDestStartIp

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.5.1.1.7

IP Filter Policy Dest Start IP Address.

apIpFilterPolicyDestEndIp

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.5.1.1.8

IP Filter Policy Dest End IP Address.

apIpFilterPolicyUseStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.5.1.1.9

Description.Indicates whether filter is used by any of the
WLAN IP Filter Tables or the TRUNK IP Filter Table.
If got used then displays YES otherwise NO.

apIpFilterPolicyRowStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.5.1.1.10

Row Status for creation and deletion of policies.

apIpFilterPolicySrcStartPort

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.5.1.1.11

IP Filter Policy Source Starting Port Number

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.388.11.3.4.5.1.1.12

apIpFilterPolicySrcEndPort

IP Filter Policy Source Ending Port Number

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.388.11.3.4.5.1.1.13

apIpFilterWlanTable

table

.1.3.6.1.4.1.388.11.3.4.5.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apIpFilterWlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apIpFilterWlanTable'

IP Filter for WLAN

apIpFilterWlanEntry row .1.3.6.1.4.1.388.11.3.4.5.2.1.1

Indexes

Column Syntax OID

apIpFilterWlanMode

IP Filter Mode.

apIpFilterWlanDefInAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.5.2.1.1.1

IP Filter Default IN Action.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.4.5.2.1.1.2

apIpFilterWlanDefOutAction

IP Filter Default OUT Action.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.4.5.2.1.1.3

apIpFilterWlanInPackets

Number of incoming packets allowed or denied as a result of the default policy

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.5.2.1.1.4

apIpFilterWlanOutPackets

Number of outgoing packets allowed or denied as a result of the default policy

apWlanIndex apIpFilterWlanPolicyIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.5.2.1.1.5

apIpFilterWlanPolicyTable

table

.1.3.6.1.4.1.388.11.3.4.5.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apIpFilterWlanPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apIpFilterWlanPolicyTable'

IP Filter Policy for WLANs.

apIpFilterWlanPolicyEntry row .1.3.6.1.4.1.388.11.3.4.5.2.2.1

Indexes

Column Syntax OID

apIpFilterWlanPolicyIndex

Simple Index.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.388.11.3.4.5.2.2.1.1

apIpFilterWlanPolicyPolicy

Single Pointer to the Global IP Filter Policy.

apIpFilterWlanPolicyDirection

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.5.2.2.1.2

IP Filter Policy Direction.

Enumerationr/w

Enumerated Values:

1	incoming
2	outgoing

.1.3.6.1.4.1.388.11.3.4.5.2.2.1.3

apIpFilterWlanPolicyAction

IP Filter Policy Action.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.4.5.2.2.1.4

apIpFilterWlanPolicyRowStatus

Row Status for creation and deletion.

apIpFilterWlanPolicyPackets

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.5.2.2.1.5

Number of packets allowed or denied as a result of this policy.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.5.2.2.1.6

apIpFilterLanTable

table

.1.3.6.1.4.1.388.11.3.4.5.3.1 · 1 row entry · 6 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apIpFilterLanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apIpFilterLanTable'

IP Filter for WLAN

apIpFilterLanEntry row .1.3.6.1.4.1.388.11.3.4.5.3.1.1

Indexes

apIpFilterLanIndex

Column Syntax OID

apIpFilterLanIndex

Description.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.388.11.3.4.5.3.1.1.1

apIpFilterLanMode

IP Filter Mode.

apIpFilterLanDefOutAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.5.3.1.1.2

apIpFilterLanDefInAction

IP Filter Default IN Action.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.4.5.3.1.1.3

IP Filter Default OUT Action.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.4.5.3.1.1.4

apIpFilterLanInPackets

Number of incoming packets allowed or denied as a result of the default policy

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.5.3.1.1.5

apIpFilterLanOutPackets

Number of outgoing packets allowed or denied as a result of the default policy.

apIpFilterLanIndex apIpFilterLanPolicyIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.5.3.1.1.6

apIpFilterLanPolicyTable

table

.1.3.6.1.4.1.388.11.3.4.5.3.2 · 1 row entry · 6 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apIpFilterLanPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apIpFilterLanPolicyTable'

IP Filter Policy for WAN Trunk Port.

apIpFilterLanPolicyEntry row .1.3.6.1.4.1.388.11.3.4.5.3.2.1

Indexes

Column Syntax OID

apIpFilterLanPolicyIndex

Simple Index.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.388.11.3.4.5.3.2.1.1

apIpFilterLanPolicyPolicy

Single Pointer to the Global IP Filter Policy.

apIpFilterLanPolicyDirection

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.4.5.3.2.1.2

IP Filter Policy Direction.

Enumerationr/w

Enumerated Values:

1	incoming
2	outgoing

.1.3.6.1.4.1.388.11.3.4.5.3.2.1.3

apIpFilterLanPolicyAction

IP Filter Policy Action.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.4.5.3.2.1.4

apIpFilterLanPolicyRowStatus

Row Status for creation and deletion.

apIpFilterLanPolicyPackets

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.4.5.3.2.1.5

Number of packets allowed or denied as a result of this policy.

apReliableMulticastAddrIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.4.5.3.2.1.6

apReliableMulticastTable

table

.1.3.6.1.4.1.388.11.3.4.6.8 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apReliableMulticastTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apReliableMulticastTable'

Table of IPv4 Multicast addresses configured for Reliable Multicast

apReliableMulticastEntry row .1.3.6.1.4.1.388.11.3.4.6.8.1

Entry of IPv4 Multicast addresses configured for Reliable Multicast

Indexes

Column Syntax OID

apReliableMulticastAddrIndex

Description.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.4.6.8.1.1

apReliableMulticastAddress

IPv4 Multicast Address

apReliableMulticastTableRowEnable

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.4.6.8.1.2

Row status for Reliable Multicast address table. Set to FALSE to delete a row. Should be TRUE while creating the row.

apReliableMulticastMUStatsIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.4.6.8.1.3

apReliableMulticastMUTable

table

.1.3.6.1.4.1.388.11.3.4.6.9 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apReliableMulticastMUTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apReliableMulticastMUTable'

Table of MUs being serviced by the reliable multicast feature.

apReliableMulticastMUEntry row .1.3.6.1.4.1.388.11.3.4.6.9.1

Description.

Indexes

Column	Syntax	OID
apReliableMulticastMUStatsIndex Description.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.388.11.3.4.6.9.1.1`
apReliableMulticastMUStatsIPAddr IPv4 Multicast Address.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.4.6.9.1.2`
apReliableMulticastMUMacAddr Mac Address of Mobile Units.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.388.11.3.4.6.9.1.3`

apWanVpnKeyAutoTable

table

.1.3.6.1.4.1.388.11.3.5.1.1.1.1 · 1 row entry · 1 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWanVpnKeyAutoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWanVpnKeyAutoTable'

Table of Auto Key Setting entries.

apWanVpnKeyAutoEntry row .1.3.6.1.4.1.388.11.3.5.1.1.1.1.1

Indexes

No indexes recorded

Column	Syntax	OID
apWanVpnKeyAutoSALifeTime The number of seconds that the security association is valid. This is an augumentation to ccWanVpnKeyAutoTable and this particular column for Security Association Life Time has been added as it was missing from the WS20…	secondsUnsigned32r/w Constraints: `range: 300-4294967295`	`.1.3.6.1.4.1.388.11.3.5.1.1.1.1.1.1`

apWanPppoeClientTable

table

.1.3.6.1.4.1.388.11.3.5.1.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWanPppoeClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWanPppoeClientTable'

Description.

apWanPppoeClientEntry row .1.3.6.1.4.1.388.11.3.5.1.2.1.1

Description.

Indexes

apWanPppoeClientIndex

Column	Syntax	OID
apWanPppoeClientIndex Description.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.388.11.3.5.1.2.1.1.1`
apWanPppoeClientIp Description.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.5.1.2.1.1.2`
apWanPppoeClientGateway Description.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.5.1.2.1.1.3`
apWanPppoeClientPrimaryDNSServer Description.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.5.1.2.1.1.4`
apWanPppoeClientSecondaryDNSServer Description.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.5.1.2.1.1.5`

apWanDynDNSTable

table

.1.3.6.1.4.1.388.11.3.5.1.4.2 · 1 row entry · 4 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWanDynDNSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWanDynDNSTable'

Table of DynDNS configuration entries.

apWanDynDNSEntry row .1.3.6.1.4.1.388.11.3.5.1.4.2.1

Description.

Indexes

apWanDynDNSIndex

Column	Syntax	OID
apWanDynDNSUsername DynDNS Username which is used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and password.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.388.11.3.5.1.4.2.1.1`
apWanDynDNSPassword DynDNS Password used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and password	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.388.11.3.5.1.4.2.1.2`
apWanDynDNSHostname DynDNS Hostname which has be linked to the WAN IP address. The hostname entry has to be made in the DynDNS.org site.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.388.11.3.5.1.4.2.1.3`
apWanDynDNSIndex Index for apWanDynDNSTable.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.388.11.3.5.1.4.2.1.4`

apWanDynDNSUpdateResponseTable

table

.1.3.6.1.4.1.388.11.3.5.1.4.3 · 1 row entry · 4 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apWanDynDNSUpdateResponseTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apWanDynDNSUpdateResponseTable'

Table to display the DynDNS update respone.

apWanDynDNSUpdateResponseEntry row .1.3.6.1.4.1.388.11.3.5.1.4.3.1

Description.

Indexes

apWanDynDNSUpdateResponseIndex

Column	Syntax	OID
apWanDynDNSUpdateHostname The DynDNS hostname which is linked to the WAN IP Address in the DynDNS.org database.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.388.11.3.5.1.4.3.1.1`
apWanDynDNSUpdateIp The WAN IP address which is linked with the hostname in the DynDNS.org site.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.5.1.4.3.1.2`
apWanDynDNSUpdateStatus DynDNS update response received from the DynDNS.org.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.5.1.4.3.1.3`
apWanDynDNSUpdateResponseIndex Index for apWanDynDNSUpdateResponseTable.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.388.11.3.5.1.4.3.1.4`

apVlanTable

table

.1.3.6.1.4.1.388.11.3.5.2.18.1 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apVlanTable'

Table of VLAN entries.

apVlanEntry row .1.3.6.1.4.1.388.11.3.5.2.18.1.1

Indexes

apVlanIndex

Column Syntax OID

apVlanIndex

Simple Index (1...16)

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.5.2.18.1.1.1

apVlanId

VLAN id.

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.388.11.3.5.2.18.1.1.2

apVlanName

VLAN name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.5.2.18.1.1.3

apVlanPointerToWlan

Pointer to WLAN associated with
this particular VLAN.

Type Values:

0	null
1	referToEntry001
2	referToEntry002
3	referToEntry003
4	referToEntry004
5	referToEntry005
6	referToEntry006
7	referToEntry007
8	referToEntry008
9	referToEntry009
10	referToEntry010
11	referToEntry011
12	referToEntry012
13	referToEntry013
14	referToEntry014
15	referToEntry015
16	referToEntry016
17	referToEntry017
18	referToEntry018
19	referToEntry019
20	referToEntry020
21	referToEntry021
22	referToEntry022
23	referToEntry023
24	referToEntry024
25	referToEntry025
26	referToEntry026
27	referToEntry027
28	referToEntry028
29	referToEntry029
30	referToEntry030
31	referToEntry031
32	referToEntry032
33	referToEntry033
34	referToEntry034
35	referToEntry035
36	referToEntry036
37	referToEntry037
38	referToEntry038
39	referToEntry039
40	referToEntry040
41	referToEntry041
42	referToEntry042
43	referToEntry043
44	referToEntry044
45	referToEntry045
46	referToEntry046
47	referToEntry047
48	referToEntry048
49	referToEntry049
50	referToEntry050
51	referToEntry051
52	referToEntry052
53	referToEntry053
54	referToEntry054
55	referToEntry055
56	referToEntry056
57	referToEntry057
58	referToEntry058
59	referToEntry059
60	referToEntry060
61	referToEntry061
62	referToEntry062
63	referToEntry063

.1.3.6.1.4.1.388.11.3.5.2.18.1.1.4

apVlanRowStatus

Row Status.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.5.2.18.1.1.5

apSubnetTable

table

.1.3.6.1.4.1.388.11.3.5.2.19.1 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apSubnetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apSubnetTable'

Table of Subnets.

apSubnetEntry row .1.3.6.1.4.1.388.11.3.5.2.19.1.1

Indexes

No indexes recorded

Column Syntax OID

apSubnetDhcpState

Specifies how Subnet gets its IP address/mask.

Enumerationr/w

Enumerated Values:

1	dhcpClient
2	dhcpServer
3	dhcpNone
4	dhcpBootp

.1.3.6.1.4.1.388.11.3.5.2.19.1.1.1

apSubnetVlanEnable

Enable VLAN.

apSubnetTypeFilterAccessMode

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.5.2.19.1.1.2

Packets can either be Forwarded or
Discarded.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.388.11.3.5.2.19.1.1.3

apSubnetAdminVlanTag

Management VLAN Tag.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.5.2.19.1.1.4

apSubnetNativeVlanTag

Native VLAN Tag.

apLanTypeFilterSubnetIndex apLanTypeFilterIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.5.2.19.1.1.5

apLanTypeFilterTable

table

.1.3.6.1.4.1.388.11.3.5.2.21 · 1 row entry · 4 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apLanTypeFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apLanTypeFilterTable'

Table describing ACLs for allowing or denying,
(depending on default behavior for the WLAN
specified in apLanTypeFilterAccessMode), MU
association with each WLAN.

apLanTypeFilterEntry row .1.3.6.1.4.1.388.11.3.5.2.21.1

Indexes

Column Syntax OID

apLanTypeFilterSubnetIndex

Subnet Index for Type Filter

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.388.11.3.5.2.21.1.1

apLanTypeFilterIndex

Simple index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.388.11.3.5.2.21.1.2

apLanTypeFilter

Ethernet type to be filtered.

EthernetTyper/w

Type Constraints:
range: 2

Description:

Represents Ethernet Types.

.1.3.6.1.4.1.388.11.3.5.2.21.1.3

apLanTypeFilterRowStatus

Row status.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.5.2.21.1.4

apLanBridgeTable

table

.1.3.6.1.4.1.388.11.3.5.2.23 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apLanBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apLanBridgeTable'

Table for Bridge Spanning Tree for a Subnet.

apLanBridgeEntry row .1.3.6.1.4.1.388.11.3.5.2.23.1

Indexes

No indexes recorded

Column	Syntax	OID
apLanBridgePriority Bridge Priority	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.388.11.3.5.2.23.1.1`
apLanBridgeMaxMsgAge Bridge Max Message Age Time.	secondsInteger32r/w Constraints: `range: 6-40`	`.1.3.6.1.4.1.388.11.3.5.2.23.1.2`
apLanBridgeHelloTime Bridge Hello Time.	secondsInteger32r/w Constraints: `range: 1-10`	`.1.3.6.1.4.1.388.11.3.5.2.23.1.3`
apLanBridgeFwdDelay Bridge Forward Delay.	secondsInteger32r/w Constraints: `range: 4-30`	`.1.3.6.1.4.1.388.11.3.5.2.23.1.4`
apLanBridgeEntryAgeout Bridge Forwarding Database Ageout value.	secondsInteger32r/w Constraints: `range: 4-3600`	`.1.3.6.1.4.1.388.11.3.5.2.23.1.5`

apKnownApTable

table

.1.3.6.1.4.1.388.11.3.5.5.1 · 1 row entry · 22 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apKnownApTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apKnownApTable'

Table of Known AP Lists.

apKnownApEntry row .1.3.6.1.4.1.388.11.3.5.5.1.1

Indexes

apKnownApIndex

Column Syntax OID

apKnownApIndex

Simple Index.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.388.11.3.5.5.1.1.1

apKnownApMac

MAC Address of the LAN port

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.5.5.1.1.2

apKnownApIp

IP Address of the LAN port

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.5.5.1.1.3

apKnownApChannel1

Channel for Radio1 in Dual Radio setup

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.5.5.1.1.4

apKnownApChannel2

Channel for Radio2 in Dual Radio setup

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.5.5.1.1.5

apKnownApMu

Number of MUs associated.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.5.5.1.1.6

apKnownApKbPerSec

Kilo Bytes in/out per second.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.5.5.1.1.7

apKnownApPktsPerSec

The number of combined input and output packets per sec

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.5.5.1.1.8

apKnownApRadioType1

Radio Type of the first radio in Dual Radio setup

Enumeration

Enumerated Values:

1	radioA
2	radioB
3	radioBG
4	radioFH
5	radioN

.1.3.6.1.4.1.388.11.3.5.5.1.1.9

apKnownApRadioType2

Radio Type of the second radio in Dual Radio setup

Enumeration

Enumerated Values:

1	radioA
2	radioB
3	radioBG
4	radioFH
5	radioN

.1.3.6.1.4.1.388.11.3.5.5.1.1.10

apKnownApType

Hardware Type.

Enumeration

Enumerated Values:

0	unknown
1	ap5131
2	ap4131
3	ap41x1
4	ap302x
5	ap71x1

.1.3.6.1.4.1.388.11.3.5.5.1.1.11

apKnownApFwVers

Firmware Version

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.5.5.1.1.12

apKnownApUnitName

System Name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.5.5.1.1.13

apKnownApEssName

ESSID of the particular WLAN.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.5.5.1.1.14

apKnownApSendCfg

Copy Configuration file button.
When set to 1 the config file of our AP shall be copied
onto the Known AP specified.

DoActionNowr/w

Type Values:

1	doActionRightNow
2	idleState

.1.3.6.1.4.1.388.11.3.5.5.1.1.15

apKnownApSendCfgStatus

Whether a copy cfg operation succeeded.

apKnownApRadio1ClientBridgeMac1

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.5.5.1.1.16

Client Bridge MAC Address 1 on Radio 1.

apKnownApRadio1ClientBridgeMac2

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.5.5.1.1.17

Client Bridge MAC Address 2 on Radio 1.

apKnownApRadio1ClientBridgeMac3

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.5.5.1.1.18

Client Bridge MAC Address 3 on Radio 1.

apKnownApRadio2ClientBridgeMac1

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.5.5.1.1.19

Client Bridge MAC Address 1 on Radio 2.

apKnownApRadio2ClientBridgeMac2

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.5.5.1.1.20

Client Bridge MAC Address 2 on Radio 2.

apKnownApRadio2ClientBridgeMac3

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.5.5.1.1.21

Client Bridge MAC Address 3 on Radio 2.

apAapSwitchDiscoveryIPAddressIndex

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.5.5.1.1.22

apAapSwitchDiscoveryIPAddressTable

table

.1.3.6.1.4.1.388.11.3.5.6.3 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apAapSwitchDiscoveryIPAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apAapSwitchDiscoveryIPAddressTable'

Table of static IP addresses used in Switch Discovery for Hybrid AP.

apAapSwitchDiscoveryIPAddressEntry row .1.3.6.1.4.1.388.11.3.5.6.3.1

apSwitchDiscoveryIPAddressEntry

Indexes

Column Syntax OID

apAapSwitchDiscoveryIPAddressIndex

Simple Index (1...6)

Integer32

Constraints:
range: 1-6

.1.3.6.1.4.1.388.11.3.5.6.3.1.1

apAapSwitchDiscoveryIPAddress

Hybrid AP Switch Discovery IP Address.

apAapSwitchDiscoveryIPAddressRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.5.6.3.1.2

Simple Row Status.

Enumerationr/w

Enumerated Values:

destroy

.1.3.6.1.4.1.388.11.3.5.6.3.1.3

apTrapCtrlEnableTable

table

.1.3.6.1.4.1.388.11.3.6.1000.1 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apTrapCtrlEnableTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apTrapCtrlEnableTable'

Table of Trap Enable entries.

apTrapCtrlEnableEntry row .1.3.6.1.4.1.388.11.3.6.1000.1.1

Indexes

apTrapCtrlEnableIndex

Column Syntax OID

apTrapCtrlEnableIndex

Simple Index.

Integer32

Constraints:
range: 1-17

.1.3.6.1.4.1.388.11.3.6.1000.1.1.1

apTrapCtrlEnableName

Name of the Trap.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.6.1000.1.1.2

apTrapCtrlEnable

Enable/Disbale a particular Trap.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.1.1.3

apTrapCtrlSumStatsTable

table

.1.3.6.1.4.1.388.11.3.6.1000.3.1 · 1 row entry · 17 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apTrapCtrlSumStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apTrapCtrlSumStatsTable'

This table configures thresholds that can be monitored for
- all MUs      and/or 
- all Portals  and/or 
- all WLANs    and/or 
- for the entire switch
          
When a given threshold is crossed, it generates the 
appropriate corresponding notification, (ccSumStats_:
_MU, _Portal, _WLAN, or _Switch).
          
Some thresholds result in notifications when exceeded, and
some when the current value sinks below the threshold.  
This is indicated by the wording of the entry in
the entry's _Descr value.
          
In all cases, the summary stat being monitored is the Short
value, never the Long value.
          
Note that for thresholds of type thresholdsAvgMuSignal & 
thresholdsAvgMuNoise, the values being 'watched' are 
actually negative.  In these cases the threshold is 
specified as a Unsigned32.  For example, if you wish to
trap on Signal being worse than -75dBm, enter '70'.  This
works since a user would never want to trap on a threshold
of Sinal worse than +10dBm.  (SNR is not an issue, since
that is a positive value).
          
Any values reported as var-binds in the resultant trap(s)
are likewise reported as positive values.

apTrapCtrlSumStatsEntry row .1.3.6.1.4.1.388.11.3.6.1000.3.1.1

The rows/instances in this table occur at the exact same
indices as the corresponding monitored data occurs in the
_SumStats tables.

For example, row #2 / instance .2 represents the
threshold(s) for the _Pk…

Indexes

apTrapCtrlSumStatsIndex

Column Syntax OID

apTrapCtrlSumStatsIndex

Index into table. Note that specific thresholds occur at
specific instance values as denoted by the enumeration
values assigned to this variable.

Enumeration

Enumerated Values:

1	unusedTimestamp
2	unusedNumPkts
3	thresholdsPktsPerSec
4	unusedPktsPerSecTx
5	unusedPktsPerSecRx
6	thresholdsThroughput
7	unusedThroughputTx
8	unusedThroughputRx
9	thresholdsAvgBitSpeed
10	thresholdsAvgMuSignal
11	thresholdsAvgMuNoise
12	thresholdsAvgMuSnr
13	thresholdsPctNUcastPkts
14	thresholdsPpmTxWithRetires
15	thresholdsPpmTxDropped
16	thresholdsTxAvgRetries
17	thresholdsPpmRxUndecrypt
18	thresholdsTotalMus
19	thresholdsPctRfUtil
20	thresholdsPctDropped

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.1

apTrapCtrlSumStatsDescr

Description of the threshold.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.2

apTrapCtrlSumStatsUnits

Units of the threshold.

apTrapCtrlSumStatsCanBeSetMu

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.3

If true, the threshold can be set for MUs.
If false, attempting the threshold will return a READ-ONLY.

apTrapCtrlSumStatsThresholdMu

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.4

The threshold for all MUs.
If 0, no threshold checking is performed.( multipled by 100)

apTrapCtrlSumStatsCanBeSetRadioA

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.5

If true, the threshold can be set for radio a.
If false, attempting the threshold will return a READ-ONLY.

Note that this object does not apply to 802.11n radios.

Please use either apTrapCt…

apTrapCtrlSumStatsThresholdRadioA

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.6

The threshold for radio a.
If 0, no threshold checking is performed.( multipled by 100,
except for 'No. of MUs associated', index 9)

Note that this object does not apply to 802.11n radios.
…

apTrapCtrlSumStatsCanBeSetRadioBG

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.7

If true, the threshold can be set for radio b/g.
If false, attempting the threshold will return a READ-ONLY.

Note that this object does not apply to 802.11n radios.

Please use either apTrap…

apTrapCtrlSumStatsThresholdRadioBG

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.8

The threshold for radio b/g.
If 0, no threshold checking is performed.( multipled by 100,
except for 'No. of MUs associated', index 9)

Note that this object does not apply to 802.11n radios.
…

apTrapCtrlSumStatsCanBeSetWlan

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.9

If true, the threshold can be set for Wlans.
If false, attempting the threshold will return a READ-ONLY.

apTrapCtrlSumStatsThresholdWlans

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.10

The threshold for all Wlans.
If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)

apTrapCtrlSumStatsCanBeSetAccessPoint

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.11

If true, the threshold can be set for the entire access point.
If false, attempting the threshold will return a READ-ONLY.

apTrapCtrlSumStatsThresholdAccessPoint

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.12

The threshold for the entire Access Point.
If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)

apTrapCtrlSumStatsCanBeSetRadioN5000MHz

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.13

If true, the threshold can be set for radio n, 5.0 GHz frequency band.
If false, attempting the threshold will return a READ-ONLY.

apTrapCtrlSumStatsThresholdRadioN5000MHz

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.14

The threshold for radio n, 5.0 GHz frequency band.
If 0, no threshold checking is performed.( multipled by 100,
except for 'No. of MUs associated', index 9).

apTrapCtrlSumStatsCanBeSetRadioN2400MHz

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.15

If true, the threshold can be set for radio n, 2.4 GHz frequency band.
If false, attempting the threshold will return a READ-ONLY.

apTrapCtrlSumStatsThresholdRadioN2400MHz

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.16

The threshold for radio n, 2.4 GHz frequency band.
If 0, no threshold checking is performed.( multipled by 100,
except for 'No. of MUs associated', index 9).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.6.1000.3.1.1.17

apMeshStatsTable

table

.1.3.6.1.4.1.388.11.3.9.7.1 · 1 row entry · 8 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apMeshStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apMeshStatsTable'

MESH Bridge Statistics

apMeshStatsEntry row .1.3.6.1.4.1.388.11.3.9.7.1.1

Indexes

apMeshStatsIndex

Column Syntax OID

apMeshStatsIndex

Simple Index.

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.388.11.3.9.7.1.1.1

apMeshStatsConnType

MESH Connection Type.

Enumeration

Enumerated Values:

1	none
2	baseBridge
3	clientBridge

.1.3.6.1.4.1.388.11.3.9.7.1.1.2

apMeshStatsMac

MAC Address.

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.9.7.1.1.3

apMeshStatsWlanPtr

WLAN Pointer.

SinglePointer

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.9.7.1.1.4

apMeshStatsRadioType

Radio Type.

'dot11a' means an 802.11a standard radio
that uses the 5GHz band.
'dot11bg' means an 802.11b and 802.11g standards radio
that uses the 2.4 GHz band.
'dot11n' means an 802.11n radio can use b…

Enumeration

Enumerated Values:

1	dot11a
2	dot11bg
3	dot11n2400MHz
4	dot11n5000MHz

.1.3.6.1.4.1.388.11.3.9.7.1.1.5

apMeshStatsThroughput

Throughput (x 100).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.1.1.6

apMeshStatsAvgBitSpeed

Average Bit Speed (x 100).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.1.1.7

apMeshStatsRetries

Retries (x 100).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.1.1.8

apMeshBridgeStatsTable

table

.1.3.6.1.4.1.388.11.3.9.7.2 · 1 row entry · 20 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apMeshBridgeStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apMeshBridgeStatsTable'

MESH Wireless Bridge Statistics.

apMeshBridgeStatsEntry row .1.3.6.1.4.1.388.11.3.9.7.2.1

Indexes

apMeshBridgeStatsIndex

Column Syntax OID

apMeshBridgeStatsIndex

Simple Index.

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.388.11.3.9.7.2.1.1

apMeshBridgeStatsMac

MAC Address.

apMeshBridgeStatsRadioType

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.9.7.2.1.2

apMeshBridgeStatsWlanPtr

WLAN Pointer.

SinglePointer

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.9.7.2.1.3

apMeshBridgeStatsLanPtr

LAN Pointer.

SinglePointer

Type Constraints:
range: 0..255

.1.3.6.1.4.1.388.11.3.9.7.2.1.4

Enumeration

Enumerated Values:

1	dot11a
2	dot11bg
3	dot11n2400MHz
4	dot11n5000MHz

.1.3.6.1.4.1.388.11.3.9.7.2.1.5

apMeshBridgeStatsAuthType

Authentication method.

Enumeration

Enumerated Values:

1	none
2	eap
3	kerberos

.1.3.6.1.4.1.388.11.3.9.7.2.1.6

apMeshBridgeStatsEncType

Encryption method.

Enumeration

Enumerated Values:

1	none
2	wep64
3	wep128
4	keyguard
5	wpaTkip
6	wpa2Ccmp

.1.3.6.1.4.1.388.11.3.9.7.2.1.7

apMeshBridgeStatsPktsPerSecRx

Packets received per second.

apMeshBridgeStatsPksPerSecTx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.8

Packets transmitted per second.

apMeshBridgeStatsPktsPerSecTotal

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.9

Total Packets per second.

apMeshBridgeStatsThroughputRx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.10

Throughput received (x 100).

apMeshBridgeStatsThroughputTx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.11

Throughput transmitted (x 100).

apMeshBridgeStatsThroughputTotal

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.12

Total Throughput (x 100).

apMeshBridgeStatsAvgBitSpeed

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.13

Average Bit Speed (x 100).

apMeshBridgeStatsAvgMuSignal

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.14

Average MU Signal (x 100).

apMeshBridgeStatsAvgMuNoise

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.15

Average MU Noise (x 100).

apMeshBridgeStatsAvgMuSnr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.16

Average MU Signal to Noise ratio (x 100).

apMeshBridgeStatsAvgRetries

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.17

Average Retries (x 100).

apMeshBridgeStatsPktsDropped

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.18

Percentage of Packets dropped (x 100).

apMeshBridgeStatsUndecryptablePkts

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.19

Percentage of Undecryptable Packets (x 100).

apLanSTPStatsPortIntfLanIndex apLanSTPStatsPortIntfPortIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.2.1.20

apLanSTPStatsTable

table

.1.3.6.1.4.1.388.11.3.9.7.3 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apLanSTPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apLanSTPStatsTable'

Table of LAN Spanning Tree Statistics.

apLanSTPStatsEntry row .1.3.6.1.4.1.388.11.3.9.7.3.1

Indexes

No indexes recorded

Column	Syntax	OID
apLanSTPStatsDesignatedRoot Designated Root.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.388.11.3.9.7.3.1.1`
apLanSTPStatsBridgeId Bridge ID.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.388.11.3.9.7.3.1.2`
apLanSTPStatsRootPort Root Port.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.9.7.3.1.3`
apLanSTPStatsRootPathCost Root Path Cost.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.9.7.3.1.4`
apLanSTPStatsBridgeMaxMsgAge Bridge Max Message Age.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.9.7.3.1.5`
apLanSTPStatsBridgeHelloTime Bridge Hello Time.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.9.7.3.1.6`
apLanSTPStatsBridgeFwDelay Bridge Forward Delay.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.388.11.3.9.7.3.1.7`

apLanSTPStatsPortIntfTable

table

.1.3.6.1.4.1.388.11.3.9.7.4 · 1 row entry · 9 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apLanSTPStatsPortIntfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apLanSTPStatsPortIntfTable'

Table of LAN Spanning Tree Port Interface Statistics.

apLanSTPStatsPortIntfEntry row .1.3.6.1.4.1.388.11.3.9.7.4.1

Indexes

Column Syntax OID

apLanSTPStatsPortIntfLanIndex

LAN index.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.388.11.3.9.7.4.1.1

apLanSTPStatsPortIntfPortIndex

Port Index.

Integer32r/w

Constraints:
range: 1-33

.1.3.6.1.4.1.388.11.3.9.7.4.1.2

apLanSTPStatsPortIntfPortName

Port Name.

apLanSTPStatsPortIntfState

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.9.7.4.1.3

State of the Port.

Enumeration

Enumerated Values:

1	disabled
2	listening
3	learning
4	forwarding
5	blocking
6	unknown

.1.3.6.1.4.1.388.11.3.9.7.4.1.4

apLanSTPStatsPortIntfPathCost

Path Cost.

apLanSTPStatsPortIntfDsgRoot

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.4.1.5

Designated Root.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.388.11.3.9.7.4.1.6

apLanSTPStatsPortIntfDsgBridge

Designated Bridge.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.388.11.3.9.7.4.1.7

apLanSTPStatsPortIntfDsgPort

Designated Port.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.388.11.3.9.7.4.1.8

apLanSTPStatsPortIntfDsgCost

Designated Cost.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.7.4.1.9

apnRadioStatsTable

table

.1.3.6.1.4.1.388.11.3.9.8.1 · 1 row entry · 16 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnRadioStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnRadioStatsTable'

APN radio statistics table.

apnRadioStatsEntry row .1.3.6.1.4.1.388.11.3.9.8.1.1

APN radio statistics entry.

Indexes

apnRadioStatsIndex

Column Syntax OID

apnRadioStatsIndex

A simple integer index to the apnRadioStatsTable.

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.388.11.3.9.8.1.1.2

apnRadioStatsBssid

The BSSID (MAC address) of the radio.

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.9.8.1.1.3

apnRadioStatsApSsid

The SSID of the AP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.9.8.1.1.4

apnRadioStatsChannel

The channel number for the radio.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.8.1.1.5

apnRadioStatsExtnChannel

The extension channel for the radio, when in 40MHz.

apnRadioStatsRssiAvgAcrossAntennas

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.8.1.1.6

The average RSSI of all the antennas combined together.

dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.9.8.1.1.7

apnRadioStatsChannelWidthMode

The channel bandwidth mode for the radio.

Enumeration

Enumerated Values:

1	twentyMHz
2	fortyMHz
3	pco

.1.3.6.1.4.1.388.11.3.9.8.1.1.8

apnRadioStatsOpFreq

The operational frequency for the radio.

Enumeration

Enumerated Values:

1	freq2400MHz
2	freq5000MHz
3	freq2400MHzAnd5000MHz

.1.3.6.1.4.1.388.11.3.9.8.1.1.9

apnRadioStatsNumPktsRxSGI400ns

Number of packets received by this radio with Short Guard Interval of 400ns.

apnRadioStatsNumPktsRxSGI800ns

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.10

Number of packets received by this radio with Short Guard Interval of 800ns.

apnRadioStatsNumPktsTxSGI400ns

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.11

Number of packets transmitted by this radio with Short Guard Interval of 400ns.

apnRadioStatsNumPktsTxSGI800ns

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.12

Number of packets transmitted by this radio with Short Guard Interval of 800ns.

apnRadioStatsNumPktsRxChanWidth20MHz

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.13

Number of packets received by this radio with channel width 20 MHz.

apnRadioStatsNumPktsRxChanWidth40MHz

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.14

Number of packets received by this radio with channel width 40 MHz.

apnRadioStatsNumPktsTxChanWidth20MHz

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.15

Number of packets transmitted by this radio with channel width 20 MHz.

apnRadioStatsNumPktsTxChanWidth40MHz

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.16

Number of packets transmitted by this radio with channel width 40 MHz.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.8.1.1.17

apnPortalRxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.8.2 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnPortalRxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnPortalRxPktsTable'

For each 802.11n Portal on the AP, this table 
describes counts of packets received at each 
speed.

apnPortalRxPktsEntry row .1.3.6.1.4.1.388.11.3.9.8.2.1

An entry in the portal received packets table.

Indexes

Column	Syntax	OID
apnPortalRxPktsAt1Mb Number of pkts received via this Portal at 1 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.1`
apnPortalRxPktsAt2Mb Number of pkts received via this Portal at 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.2`
apnPortalRxPktsAt5pt5Mb Number of pkts received via this Portal at 5.5 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.3`
apnPortalRxPktsAt6Mb Number of pkts received via this Portal at 6 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.4`
apnPortalRxPktsAt9Mb Number of pkts received via this Portal at 9 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.5`
apnPortalRxPktsAt11Mb Number of pkts received via this Portal at 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.6`
apnPortalRxPktsAt12Mb Number of pkts received via this Portal at 12 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.7`
apnPortalRxPktsAt18Mb Number of pkts received via this Portal at 18 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.8`
apnPortalRxPktsAt24Mb Number of pkts received via this Portal at 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.9`
apnPortalRxPktsAt36Mb Number of pkts received via this Portal at 36 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.10`
apnPortalRxPktsAt48Mb Number of pkts received via this Portal at 48 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.11`
apnPortalRxPktsAt54Mb Number of pkts received via this Portal at 54 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.12`
apnPortalRxPktsAtMCS0 Number of pkts received via this Portal at MCS 0 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.13`
apnPortalRxPktsAtMCS1 Number of pkts received via this Portal at MCS 1 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.14`
apnPortalRxPktsAtMCS2 Number of pkts received via this Portal at MCS 2 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.15`
apnPortalRxPktsAtMCS3 Number of pkts received via this Portal at MCS 3 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.16`
apnPortalRxPktsAtMCS4 Number of pkts received via this Portal at MCS 4 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.17`
apnPortalRxPktsAtMCS5 Number of pkts received via this Portal at MCS 5 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.18`
apnPortalRxPktsAtMCS6 Number of pkts received via this Portal at MCS 6 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.19`
apnPortalRxPktsAtMCS7 Number of pkts received via this Portal at MCS 7 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.20`
apnPortalRxPktsAtMCS8 Number of pkts received via this Portal at MCS 8 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.21`
apnPortalRxPktsAtMCS9 Number of pkts received via this Portal at MCS 9 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.22`
apnPortalRxPktsAtMCS10 Number of pkts received via this Portal at MCS 10 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.23`
apnPortalRxPktsAtMCS11 Number of pkts received via this Portal at MCS 11 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.24`
apnPortalRxPktsAtMCS12 Number of pkts received via this Portal at MCS 12 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.25`
apnPortalRxPktsAtMCS13 Number of pkts received via this Portal at MCS 13 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.26`
apnPortalRxPktsAtMCS14 Number of pkts received via this Portal at MCS 14 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.27`
apnPortalRxPktsAtMCS15 Number of pkts received via this Portal at MCS 15 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.2.1.28`

apnPortalTxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.8.3 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnPortalTxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnPortalTxPktsTable'

For each 802.11n Portal on the AP, this table 
describes counts of packets transmitted at each 
speed.

apnPortalTxPktsEntry row .1.3.6.1.4.1.388.11.3.9.8.3.1

An entry in the portal transmitted packets table.

Indexes

Column	Syntax	OID
apnPortalTxPktsAt1Mb Number of pkts transmitted via this Portal at 1 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.1`
apnPortalTxPktsAt2Mb Number of pkts transmitted via this Portal at 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.2`
apnPortalTxPktsAt5pt5Mb Number of pkts transmitted via this Portal at 5.5 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.3`
apnPortalTxPktsAt6Mb Number of pkts transmitted via this Portal at 6 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.4`
apnPortalTxPktsAt9Mb Number of pkts transmitted via this Portal at 9 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.5`
apnPortalTxPktsAt11Mb Number of pkts transmitted via this Portal at 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.6`
apnPortalTxPktsAt12Mb Number of pkts transmitted via this Portal at 12 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.7`
apnPortalTxPktsAt18Mb Number of pkts transmitted via this Portal at 18 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.8`
apnPortalTxPktsAt24Mb Number of pkts transmitted via this Portal at 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.9`
apnPortalTxPktsAt36Mb Number of pkts transmitted via this Portal at 36 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.10`
apnPortalTxPktsAt48Mb Number of pkts transmitted via this Portal at 48 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.11`
apnPortalTxPktsAt54Mb Number of pkts transmitted via this Portal at 54 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.12`
apnPortalTxPktsAtMCS0 Number of pkts transmitted via this Portal at MCS 0 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.13`
apnPortalTxPktsAtMCS1 Number of pkts transmitted via this Portal at MCS 1 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.14`
apnPortalTxPktsAtMCS2 Number of pkts transmitted via this Portal at MCS 2 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.15`
apnPortalTxPktsAtMCS3 Number of pkts transmitted via this Portal at MCS 3 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.16`
apnPortalTxPktsAtMCS4 Number of pkts transmitted via this Portal at MCS 4 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.17`
apnPortalTxPktsAtMCS5 Number of pkts transmitted via this Portal at MCS 5 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.18`
apnPortalTxPktsAtMCS6 Number of pkts transmitted via this Portal at MCS 6 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.19`
apnPortalTxPktsAtMCS7 Number of pkts transmitted via this Portal at MCS 7 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.20`
apnPortalTxPktsAtMCS8 Number of pkts transmitted via this Portal at MCS 8 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.21`
apnPortalTxPktsAtMCS9 Number of pkts transmitted via this Portal at MCS 9 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.22`
apnPortalTxPktsAtMCS10 Number of pkts transmitted via this Portal at MCS 10 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.23`
apnPortalTxPktsAtMCS11 Number of pkts transmitted via this Portal at MCS 11 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.24`
apnPortalTxPktsAtMCS12 Number of pkts transmitted via this Portal at MCS 12 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.25`
apnPortalTxPktsAtMCS13 Number of pkts transmitted via this Portal at MCS 13 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.26`
apnPortalTxPktsAtMCS14 Number of pkts transmitted via this Portal at MCS 14 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.27`
apnPortalTxPktsAtMCS15 Number of pkts transmitted via this Portal at MCS 15 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.3.1.28`

apnPortalRxOctetsTable

table

.1.3.6.1.4.1.388.11.3.9.8.4 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnPortalRxOctetsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnPortalRxOctetsTable'

For each 802.11n Portal on this AP, this table 
describes counts of octets received at each 
speed.

apnPortalRxOctetsEntry row .1.3.6.1.4.1.388.11.3.9.8.4.1

An entry in the portal received octets table.

Indexes

Column	Syntax	OID
apnPortalRxOctetsAt1Mb Number of octets received via this Portal at 1 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.1`
apnPortalRxOctetsAt2Mb Number of octets received via this Portal at 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.2`
apnPortalRxOctetsAt5pt5Mb Number of octets received via this Portal at 5.5 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.3`
apnPortalRxOctetsAt6Mb Number of octets received via this Portal at 6 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.4`
apnPortalRxOctetsAt9Mb Number of octets received via this Portal at 9 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.5`
apnPortalRxOctetsAt11Mb Number of octets received via this Portal at 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.6`
apnPortalRxOctetsAt12Mb Number of octets received via this Portal at 12 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.7`
apnPortalRxOctetsAt18Mb Number of octets received via this Portal at 18 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.8`
apnPortalRxOctetsAt24Mb Number of octets received via this Portal at 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.9`
apnPortalRxOctetsAt36Mb Number of octets received via this Portal at 36 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.10`
apnPortalRxOctetsAt48Mb Number of octets received via this Portal at 48 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.11`
apnPortalRxOctetsAt54Mb Number of octets received via this Portal at 54 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.12`
apnPortalRxOctetsAtMCS0 Number of octets received via this Portal at MCS 0 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.13`
apnPortalRxOctetsAtMCS1 Number of octets received via this Portal at MCS 1 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.14`
apnPortalRxOctetsAtMCS2 Number of octets received via this Portal at MCS 2 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.15`
apnPortalRxOctetsAtMCS3 Number of octets received via this Portal at MCS 3 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.16`
apnPortalRxOctetsAtMCS4 Number of octets received via this Portal at MCS 4 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.17`
apnPortalRxOctetsAtMCS5 Number of octets received via this Portal at MCS 5 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.18`
apnPortalRxOctetsAtMCS6 Number of octets received via this Portal at MCS 6 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.19`
apnPortalRxOctetsAtMCS7 Number of octets received via this Portal at MCS 7 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.20`
apnPortalRxOctetsAtMCS8 Number of octets received via this Portal at MCS 8 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.21`
apnPortalRxOctetsAtMCS9 Number of octets received via this Portal at MCS 9 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.22`
apnPortalRxOctetsAtMCS10 Number of octets received via this Portal at MCS 10 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.23`
apnPortalRxOctetsAtMCS11 Number of octets received via this Portal at MCS 11 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.24`
apnPortalRxOctetsAtMCS12 Number of octets received via this Portal at MCS 12 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.25`
apnPortalRxOctetsAtMCS13 Number of octets received via this Portal at MCS 13 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.26`
apnPortalRxOctetsAtMCS14 Description.Number of octets received via this Portal at MCS 14 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.27`
apnPortalRxOctetsAtMCS15 Number of octets received via this Portal at MCS 15 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.4.1.28`

apnPortalTxOctetsTable

table

.1.3.6.1.4.1.388.11.3.9.8.5 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnPortalTxOctetsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnPortalTxOctetsTable'

For each 802.11n Portal on this AP, this table 
describes counts of octets transmitted at each 
speed.

apnPortalTxOctetsEntry row .1.3.6.1.4.1.388.11.3.9.8.5.1

An entry in the portal transmitted octets table.

Indexes

Column	Syntax	OID
apnPortalTxOctetsAt1Mb Number of octets transmitted via this Portal at 1 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.2`
apnPortalTxOctetsAt2Mb Number of octets transmitted via this Portal at 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.3`
apnPortalTxOctetsAt5pt5Mb Number of octets transmitted via this Portal at 5.5 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.4`
apnPortalTxOctetsAt6Mb Number of octets transmitted via this Portal at 6 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.5`
apnPortalTxOctetsAt9Mb Number of octets transmitted via this Portal at 9 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.6`
apnPortalTxOctetsAt11Mb Number of octets transmitted via this Portal at 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.7`
apnPortalTxOctetsAt12Mb Number of octets transmitted via this Portal at 12 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.8`
apnPortalTxOctetsAt18Mb Number of octets transmitted via this Portal at 18 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.9`
apnPortalTxOctetsAt24Mb Number of octets transmitted via this Portal at 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.10`
apnPortalTxOctetsAt36Mb Number of octets transmitted via this Portal at 36 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.11`
apnPortalTxOctetsAt48Mb Number of octets transmitted via this Portal at 48 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.12`
apnPortalTxOctetsAt54Mb Number of octets transmitted via this Portal at 54 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.13`
apnPortalTxOctetsAtMCS0 Number of octets transmitted via this Portal at MCS 0 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.14`
apnPortalTxOctetsAtMCS1 Number of octets transmitted via this Portal at MCS 1 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.15`
apnPortalTxOctetsAtMCS2 Number of octets transmitted via this Portal at MCS 2 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.16`
apnPortalTxOctetsAtMCS3 Number of octets transmitted via this Portal at MCS 3 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.17`
apnPortalTxOctetsAtMCS4 Number of octets transmitted via this Portal at MCS 4 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.18`
apnPortalTxOctetsAtMCS5 Number of octets transmitted via this Portal at MCS 5 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.19`
apnPortalTxOctetsAtMCS6 Number of octets transmitted via this Portal at MCS 6 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.20`
apnPortalTxOctetsAtMCS7 Number of octets transmitted via this Portal at MCS 7 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.21`
apnPortalTxOctetsAtMCS8 Number of octets transmitted via this Portal at MCS 8 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.22`
apnPortalTxOctetsAtMCS9 Number of octets transmitted via this Portal at MCS 9 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.23`
apnPortalTxOctetsAtMCS10 Number of octets transmitted via this Portal at MCS 10 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.24`
apnPortalTxOctetsAtMCS11 Number of octets transmitted via this Portal at MCS 11 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.25`
apnPortalTxOctetsAtMCS12 Number of octets transmitted via this Portal at MCS 12 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.26`
apnPortalTxOctetsAtMCS13 Number of octets transmitted via this Portal at MCS 13 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.27`
apnPortalTxOctetsAtMCS14 Number of octets transmitted via this Portal at MCS 14 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.28`
apnPortalTxOctetsAtMCS15 Number of octets transmitted via this Portal at MCS 15 rate.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.5.1.29`

apnMuRxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.8.6 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnMuRxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnMuRxPktsTable'

For each mobile unit associated to an 802.11n Portal 
on the AP, this table describes counts of packets 
received at each speed.

apnMuRxPktsEntry row .1.3.6.1.4.1.388.11.3.9.8.6.1

Indexes

Column	Syntax	OID
apnMuRxPktsAt1Mb Number of pkts received via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.1`
apnMuRxPktsAt2Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.2`
apnMuRxPktsAt5pt5Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.3`
apnMuRxPktsAt6Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.4`
apnMuRxPktsAt9Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.5`
apnMuRxPktsAt11Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.6`
apnMuRxPktsAt12Mb Number of pkts received via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.7`
apnMuRxPktsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.8`
apnMuRxPktsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.9`
apnMuRxPktsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.10`
apnMuRxPktsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.11`
apnMuRxPktsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.12`
apnMuRxPktsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.13`
apnMuRxPktsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.14`
apnMuRxPktsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.15`
apnMuRxPktsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.16`
apnMuRxPktsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.17`
apnMuRxPktsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.18`
apnMuRxPktsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.19`
apnMuRxPktsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.20`
apnMuRxPktsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.21`
apnMuRxPktsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.22`
apnMuRxPktsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.23`
apnMuRxPktsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.24`
apnMuRxPktsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.25`
apnMuRxPktsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.26`
apnMuRxPktsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.27`
apnMuRxPktsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.6.1.28`

apnMuTxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.8.7 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnMuTxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnMuTxPktsTable'

For each mobile unit associated to an 802.11n Portal 
on the AP, this table describes counts of packets 
transmitted at each speed.

apnMuTxPktsEntry row .1.3.6.1.4.1.388.11.3.9.8.7.1

Indexes

Column	Syntax	OID
apnMuTxPktsAt1Mb Number of pkts transmitted via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.1`
apnMuTxPktsAt2Mb Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.2`
apnMuTxPktsAt5pt5Mb Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.3`
apnMuTxPktsAt6Mb Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.4`
apnMuTxPktsAt9Mb Number of pkts transmitted via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.5`
apnMuTxPktsAt11Mb Number of pkts transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.6`
apnMuTxPktsAt12Mb Number of pkts transmitted via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.7`
apnMuTxPktsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.8`
apnMuTxPktsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.9`
apnMuTxPktsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.10`
apnMuTxPktsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.11`
apnMuTxPktsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.12`
apnMuTxPktsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.13`
apnMuTxPktsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.14`
apnMuTxPktsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.15`
apnMuTxPktsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.16`
apnMuTxPktsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.17`
apnMuTxPktsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.18`
apnMuTxPktsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.19`
apnMuTxPktsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.20`
apnMuTxPktsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.21`
apnMuTxPktsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.22`
apnMuTxPktsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.23`
apnMuTxPktsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.24`
apnMuTxPktsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.25`
apnMuTxPktsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.26`
apnMuTxPktsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.27`
apnMuTxPktsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.7.1.28`

apnMuRxOctetsTable

table

.1.3.6.1.4.1.388.11.3.9.8.8 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnMuRxOctetsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnMuRxOctetsTable'

For each mobile unit associated to an 802.11n Portal 
on the AP, this table describes counts of octets 
received at each speed.

apnMuRxOctetsEntry row .1.3.6.1.4.1.388.11.3.9.8.8.1

Indexes

Column	Syntax	OID
apnMuRxOctetsAt1Mb Number of octets received via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.1`
apnMuRxOctetsAt2Mb Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.2`
apnMuRxOctetsAt5pt5Mb Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.3`
apnMuRxOctetsAt6Mb Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.4`
apnMuRxOctetsAt9Mb Number of octets received via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.5`
apnMuRxOctetsAt11Mb Number of octets received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.6`
apnMuRxOctetsAt12Mb Number of octets received via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.7`
apnMuRxOctetsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.8`
apnMuRxOctetsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.9`
apnMuRxOctetsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.10`
apnMuRxOctetsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.11`
apnMuRxOctetsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.12`
apnMuRxOctetsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.13`
apnMuRxOctetsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.14`
apnMuRxOctetsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.15`
apnMuRxOctetsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.16`
apnMuRxOctetsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.17`
apnMuRxOctetsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.18`
apnMuRxOctetsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.19`
apnMuRxOctetsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.20`
apnMuRxOctetsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.21`
apnMuRxOctetsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.22`
apnMuRxOctetsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.23`
apnMuRxOctetsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.24`
apnMuRxOctetsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.25`
apnMuRxOctetsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.26`
apnMuRxOctetsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.27`
apnMuRxOctetsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.8.1.28`

apnMuTxOctetsTable

table

.1.3.6.1.4.1.388.11.3.9.8.9 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnMuTxOctetsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnMuTxOctetsTable'

For each mobile unit associated to an 802.11n Portal 
on the AP, this table describes counts of octets 
transmitted at each speed.

apnMuTxOctetsEntry row .1.3.6.1.4.1.388.11.3.9.8.9.1

Indexes

Column	Syntax	OID
apnMuTxOctetsAt1Mb Number octets transmitted via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.2`
apnMuTxOctetsAt2Mb Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.3`
apnMuTxOctetsAt5pt5Mb Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.4`
apnMuTxOctetsAt6Mb Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.5`
apnMuTxOctetsAt9Mb Number octets transmitted via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.6`
apnMuTxOctetsAt11Mb Number octets transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.7`
apnMuTxOctetsAt12Mb Number octets transmitted via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.8`
apnMuTxOctetsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.9`
apnMuTxOctetsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.10`
apnMuTxOctetsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.11`
apnMuTxOctetsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.12`
apnMuTxOctetsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.13`
apnMuTxOctetsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.14`
apnMuTxOctetsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.15`
apnMuTxOctetsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.16`
apnMuTxOctetsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.17`
apnMuTxOctetsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.18`
apnMuTxOctetsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.19`
apnMuTxOctetsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.20`
apnMuTxOctetsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.21`
apnMuTxOctetsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.22`
apnMuTxOctetsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.23`
apnMuTxOctetsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.24`
apnMuTxOctetsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.25`
apnMuTxOctetsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.26`
apnMuTxOctetsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.27`
apnMuTxOctetsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.28`
apnMuTxOctetsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.9.1.29`

apnWlanRxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.8.10 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnWlanRxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnWlanRxPktsTable'

For each wlan on the 802.11n Portal on the AP, 
this table describes counts of packets received 
at each speed.

apnWlanRxPktsEntry row .1.3.6.1.4.1.388.11.3.9.8.10.1

Indexes

Column	Syntax	OID
apnWlanRxPktsAt1Mb Number of pkts received via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.1`
apnWlanRxPktsAt2Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.2`
apnWlanRxPktsAt5pt5Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.3`
apnWlanRxPktsAt6Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.4`
apnWlanRxPktsAt9Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.5`
apnWlanRxPktsAt11Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.6`
apnWlanRxPktsAt12Mb Number of pkts received via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.7`
apnWlanRxPktsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.8`
apnWlanRxPktsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.9`
apnWlanRxPktsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.10`
apnWlanRxPktsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.11`
apnWlanRxPktsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.12`
apnWlanRxPktsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.13`
apnWlanRxPktsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.14`
apnWlanRxPktsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.15`
apnWlanRxPktsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.16`
apnWlanRxPktsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.17`
apnWlanRxPktsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.18`
apnWlanRxPktsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.19`
apnWlanRxPktsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.20`
apnWlanRxPktsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.21`
apnWlanRxPktsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.22`
apnWlanRxPktsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.23`
apnWlanRxPktsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.24`
apnWlanRxPktsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.25`
apnWlanRxPktsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.26`
apnWlanRxPktsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.27`
apnWlanRxPktsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.10.1.28`

apnWlanTxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.8.11 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnWlanTxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnWlanTxPktsTable'

For each wlan on the 802.11n Portal on the AP, 
this table describes counts of packets transmitted 
at each speed.

apnWlanTxPktsEntry row .1.3.6.1.4.1.388.11.3.9.8.11.1

Indexes

Column	Syntax	OID
apnWlanTxPktsAt1Mb Number of pkts received via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.1`
apnWlanTxPktsAt2Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.2`
apnWlanTxPktsAt5pt5Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.3`
apnWlanTxPktsAt6Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.4`
apnWlanTxPktsAt9Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.5`
apnWlanTxPktsAt11Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.6`
apnWlanTxPktsAt12Mb Number of pkts received via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.7`
apnWlanTxPktsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.8`
apnWlanTxPktsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.9`
apnWlanTxPktsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.10`
apnWlanTxPktsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.11`
apnWlanTxPktsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.12`
apnWlanTxPktsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.13`
apnWlanTxPktsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.14`
apnWlanTxPktsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.15`
apnWlanTxPktsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.16`
apnWlanTxPktsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.17`
apnWlanTxPktsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.18`
apnWlanTxPktsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.19`
apnWlanTxPktsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.20`
apnWlanTxPktsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.21`
apnWlanTxPktsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.22`
apnWlanTxPktsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.23`
apnWlanTxPktsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.24`
apnWlanTxPktsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.25`
apnWlanTxPktsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.26`
apnWlanTxPktsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.27`
apnWlanTxPktsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.11.1.28`

apnWlanRxOctetsTable

table

.1.3.6.1.4.1.388.11.3.9.8.12 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnWlanRxOctetsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnWlanRxOctetsTable'

For each wlan on the 802.11n Portal on the AP, 
this table describes counts of octets received 
at each speed.

apnWlanRxOctetsEntry row .1.3.6.1.4.1.388.11.3.9.8.12.1

Indexes

Column	Syntax	OID
apnWlanRxOctetsAt1Mb Number of pkts received via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.1`
apnWlanRxOctetsAt2Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.2`
apnWlanRxOctetsAt5pt5Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.3`
apnWlanRxOctetsAt6Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.4`
apnWlanRxOctetsAt9Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.5`
apnWlanRxOctetsAt11Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.6`
apnWlanRxOctetsAt12Mb Number of pkts received via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.7`
apnWlanRxOctetsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.8`
apnWlanRxOctetsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.9`
apnWlanRxOctetsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.10`
apnWlanRxOctetsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.11`
apnWlanRxOctetsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.12`
apnWlanRxOctetsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.13`
apnWlanRxOctetsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.14`
apnWlanRxOctetsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.15`
apnWlanRxOctetsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.16`
apnWlanRxOctetsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.17`
apnWlanRxOctetsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.18`
apnWlanRxOctetsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.19`
apnWlanRxOctetsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.20`
apnWlanRxOctetsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.21`
apnWlanRxOctetsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.22`
apnWlanRxOctetsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.23`
apnWlanRxOctetsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.24`
apnWlanRxOctetsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.25`
apnWlanRxOctetsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.26`
apnWlanRxOctetsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.27`
apnWlanRxOctetsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.12.1.28`

apnWlanTxOctetsTable

table

.1.3.6.1.4.1.388.11.3.9.8.13 · 1 row entry · 28 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apnWlanTxOctetsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apnWlanTxOctetsTable'

For each wlan on the 802.11n Portal on the AP, 
this table describes counts of octets transmitted 
at each speed.

apnWlanTxOctetsEntry row .1.3.6.1.4.1.388.11.3.9.8.13.1

Indexes

Column	Syntax	OID
apnWlanTxOctetsAt1Mb Number of pkts received via this Portal at 1 and 2 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.1`
apnWlanTxOctetsAt2Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.2`
apnWlanTxOctetsAt5pt5Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.3`
apnWlanTxOctetsAt6Mb Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.4`
apnWlanTxOctetsAt9Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.5`
apnWlanTxOctetsAt11Mb Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.6`
apnWlanTxOctetsAt12Mb Number of pkts received via this Portal at MCS 0 to 7 rates.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.7`
apnWlanTxOctetsAt18Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.8`
apnWlanTxOctetsAt24Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.9`
apnWlanTxOctetsAt36Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.10`
apnWlanTxOctetsAt48Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.11`
apnWlanTxOctetsAt54Mb Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.12`
apnWlanTxOctetsAtMCS0 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.13`
apnWlanTxOctetsAtMCS1 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.14`
apnWlanTxOctetsAtMCS2 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.15`
apnWlanTxOctetsAtMCS3 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.16`
apnWlanTxOctetsAtMCS4 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.17`
apnWlanTxOctetsAtMCS5 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.18`
apnWlanTxOctetsAtMCS6 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.19`
apnWlanTxOctetsAtMCS7 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.20`
apnWlanTxOctetsAtMCS8 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.21`
apnWlanTxOctetsAtMCS9 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.22`
apnWlanTxOctetsAtMCS10 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.23`
apnWlanTxOctetsAtMCS11 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.24`
apnWlanTxOctetsAtMCS12 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.25`
apnWlanTxOctetsAtMCS13 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.26`
apnWlanTxOctetsAtMCS14 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.27`
apnWlanTxOctetsAtMCS15 Description.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.8.13.1.28`

apLanInfoTable

table

.1.3.6.1.4.1.388.11.3.9.10.1 · 1 row entry · 7 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apLanInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apLanInfoTable'

Description.

apLanInfoEntry row .1.3.6.1.4.1.388.11.3.9.10.1.1

Description.

Indexes

Column Syntax OID

Description.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.388.11.3.9.10.1.1.1

apLanInfoEnabled

Is LAN enabled.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.388.11.3.9.10.1.1.2

apLanInfoIpAddress

LAN ip address

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.9.10.1.1.3

apLanInfoNetworkMask

LAN network mask.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.388.11.3.9.10.1.1.4

apLanInfoEthernetAddress

Description.

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.388.11.3.9.10.1.1.5

apLanInfoSpeed

Lan Ethernet Port Speed.

mbpsSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.388.11.3.9.10.1.1.6

apLanInfoDuplexMode

Lan ethernet port duplex mode.

Enumeration

Enumerated Values:

0	half
1	full

.1.3.6.1.4.1.388.11.3.9.10.1.1.7

apLanRxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.10.2 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apLanRxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apLanRxPktsTable'

Description.

apLanRxPktsEntry row .1.3.6.1.4.1.388.11.3.9.10.2.1

Description.

Indexes

Column	Syntax	OID
apLanRxPkts Count of packets received.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.2.1.1`
apLanRxBytes Count of bytes received.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.2.1.2`
apLanRxErrors Count of errors received.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.2.1.3`
apLanRxDropped Count of received packets dropped.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.2.1.4`
apLanRxFrameErrors Count of received frame errors.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.2.1.5`

apLanTxPktsTable

table

.1.3.6.1.4.1.388.11.3.9.10.4 · 1 row entry · 5 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apLanTxPktsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apLanTxPktsTable'

Description.

apLanTxPktsEntry row .1.3.6.1.4.1.388.11.3.9.10.4.1

Description.

Indexes

Column	Syntax	OID
apLanTxPkts Count of packets transmitted.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.4.1.1`
apLanTxBytes Count of bytes transmitted.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.4.1.2`
apLanTxErrors Count of errors transmitted.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.4.1.3`
apLanTxDropped Count of transmitted packets dropped.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.4.1.4`
apLanTxFrameErrors Count of transmitted carrier errors.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.388.11.3.9.10.4.1.5`

apTrustedHostRangeTable

table

.1.3.6.1.4.1.388.11.3.10.2.2 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apTrustedHostRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apTrustedHostRangeTable'

Table of trusted host ip ranges.

apTrustedHostRangeEntry row .1.3.6.1.4.1.388.11.3.10.2.2.1

Trusted host ip range table entry.

Indexes

apTrustedHostRangeIndex

Column	Syntax	OID
apTrustedHostRangeIndex Trusted host ip range index.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.388.11.3.10.2.2.1.1`
apTrustedHostRangeLowerIp Lower bound of ip address range.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.10.2.2.1.2`
apTrustedHostRangeUpperIp Upper bound of ip address range.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.388.11.3.10.2.2.1.3`

apManualTimeZoneTable

table

.1.3.6.1.4.1.388.11.3.12.2.1 · 1 row entry · 2 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apManualTimeZoneTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apManualTimeZoneTable'

Table of all the Time Zones.

apManualTimeZoneEntry row .1.3.6.1.4.1.388.11.3.12.2.1.1

Indexes

apManualTimeZoneIndex

Column	Syntax	OID
apManualTimeZoneIndex Simple Index.	Integer32 Constraints: `range: 1-550`	`.1.3.6.1.4.1.388.11.3.12.2.1.1.1`
apManualTimeZoneName Time Zone Name.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.388.11.3.12.2.1.1.2`

apRadiusUsersGroupTable

table

.1.3.6.1.4.1.388.11.3.14.1.1 · 1 row entry · 3 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadiusUsersGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadiusUsersGroupTable'

Description.

apRadiusUsersGroupEntry row .1.3.6.1.4.1.388.11.3.14.1.1.1

Description.

Indexes

apRadiusUsersGroup

Column Syntax OID

apRadiusUsersGroup

Description.

apRadiusUsersGroupRowStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.388.11.3.14.1.1.1.1

Description.

Type Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.388.11.3.14.1.1.1.2

apRadiusUsersGroupId

Description.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.388.11.3.14.1.1.1.3

apRadiusAccessTable

table

.1.3.6.1.4.1.388.11.3.14.2.1 · 1 row entry · 2 columns

Open in standard view

Uses the symbol variant from /opt/observium/mibs/symbol.

Command help

Walk apRadiusAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYMBOL-AP-MIB' -M '/opt/observium/mibs/symbol:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYMBOL-AP-MIB::apRadiusAccessTable'

Description.

apRadiusAccessEntry row .1.3.6.1.4.1.388.11.3.14.2.1.1

Description.

Indexes

apRadiusUsersGroup

Column Syntax OID

apRadiusAccessWlanPtrs

Description.

Bitsr/w

Enumerated Values:

0	null
1	wlan1
2	wlan2
3	wlan3
4	wlan4

.1.3.6.1.4.1.388.11.3.14.2.1.1.2

apRadiusAccessTimeRule

Description.