SUPERMICRO-VLAN-MIB Table View

Table containing the port type information.

dot1qFutureVlanPortEntry row .1.3.6.1.4.1.10876.101.1.65.1.10.1

Entry indicating the type of the port.

Indexes

dot1qFutureVlanPort

Column	Syntax	OID
dot1qFutureVlanPort The port number of the port for which this entry applies.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.65.1.10.1.1
dot1qFutureVlanPortType The type of the port is by default hybrid port. When configured as access port, the port can accept and send only untagged frames. When configured as a trunk port, port is added as member of all the existing Vlans an…	Enumerationr/w Enumerated Values: 1 accessPort 2 trunkPort 3 hybridPort 4 hostPort 5 promiscuousPort	.1.3.6.1.4.1.10876.101.1.65.1.10.1.2
dot1qFutureVlanPortPortProtoBasedClassification Object to expilicitly enable/disable the port and protocol Classification on port. This can be independently set without any dependency in available configuration of dot1qFutureVlanPortProtoBasedOnAllPorts	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.65.1.10.1.4
dot1qFutureVlanFilteringUtilityCriteria Based on this object, learning on a port is decided. If default filtering utility Criteria is selected on a port, then learning of source mac from a received packet on that port will be done only if there…	Enumerationr/w Enumerated Values: 1 default 2 enhanced	.1.3.6.1.4.1.10876.101.1.65.1.10.1.5
dot1qFutureVlanPortProtected The Split Horizon property of the port. If set to true, frames that are received on any other port that has the same property set to true, will not be forwarded on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.65.1.10.1.6
dot1qFutureVlanPortUnicastMacLearning A Truth value indicating the unicast MAC learning enabled/disabled status for this port. When Unicast Mac Learning is disabled, no unicast mac entry will be learnt on this port. When Mac Learning is enabled, unicast m…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.65.1.10.1.8
dot1qFutureVlanPortAllowedVlanList A string of octets containing one bit per vlan. Specifies the vlans which the trunk port can add to. By default all vlans are allowed to add the trunk ports. If a set of vlans are configured in the 'VlanL…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.10876.101.1.65.1.10.1.9

A table that contains information on Vlan-MAC address 
mapping. 
BCM supports Mac based VLAN globally (not on per port).

dot1qFutureVlanPortMacMapEntry row .1.3.6.1.4.1.10876.101.1.65.1.11.1

Entry that contains Vlan-MAC address mapping.

Indexes

dot1qFutureVlanPortMacMapAddr

Column	Syntax	OID
dot1qFutureVlanPortMacMapAddr The Mac address for which the Vlan mapping is present in the entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.65.1.11.1.1
dot1qFutureVlanPortMacMapVid The Vlan to which the mac address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.1.65.1.11.1.2
dot1qFutureVlanPortMacMapRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.65.1.11.1.5

This table contains information about the Filtering database identifier
(FID) used by vlan's to make forwarding decisions. Vlan's can be mapped 
to use the same FID to share filtering information among them. This will
cause the mapped vlan's to operate in shared vlan learning (SVL) mode.
Vlan's mapped to a unique FID will operate in independent vlan learning
mode (IVL). A SET operation on this table is allowed only when 
dot1qFutureVlanLearningMode is hybrid. By default all vlan's will be 
mapped to the FID equal to their vlan id when 
dot1qFutureVlanHybridTypeDefault is IVL. If the value of 
dot1qFutureVlanHybridTypeDefault is SVL all vlan's are mapped to 
filtering database id 1.

dot1qFutureVlanFidMapEntry row .1.3.6.1.4.1.10876.101.1.65.1.12.1

Entry mapping VlanId to Filtering database id.

Indexes

dot1qFutureVlanIndex

Column	Syntax	OID
dot1qFutureVlanIndex VLAN ID for which filtering database information is available.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.10876.101.1.65.1.12.1.1
dot1qFutureVlanFid The Filtering database id (FID) that will be used by the vlan.	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.10876.101.1.65.1.12.1.2

The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN.

dot1qFutureVlanCounterEntry row .1.3.6.1.4.1.10876.101.1.65.1.16.1

The entry contains the VLAN statistics

Indexes

dot1qFutureVlanIndex

Column	Syntax	OID
dot1qFutureVlanCounterRxUcast Number of unicast packets received in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.65.1.16.1.1
dot1qFutureVlanCounterRxMcastBcast Number of multicast/broadcast packets received in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.65.1.16.1.2
dot1qFutureVlanCounterTxUnknUcast Number of unknown unicast packets flooded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.65.1.16.1.3
dot1qFutureVlanCounterTxUcast Number of known unicast packets forwarded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.65.1.16.1.4
dot1qFutureVlanCounterTxBcast Number of broadcast packets forwarded in this VLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.65.1.16.1.5
dot1qFutureVlanCounterStatus A Truth value indicating the statistics collection is enabled/disabled for this vlan. When statistics collection is set to disabled, Vlan stops collecting statistics on this specific vlan. When statistics…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.65.1.16.1.6

A table containing per VLAN Unicast MAC address control information. 
The control information includes the status of unicast MAC address 
learning as well as restricting the number of unique entries learnt to 
a specified limit for the specified VLAN.

dot1qFutureVlanUnicastMacControlEntry row .1.3.6.1.4.1.10876.101.1.65.1.17.1

Information controlling the number of distinct unicast MAC addresses
that can be learnt by a VLAN depending on whether learning is enabled
or disabled for the specified VLAN.

Indexes

dot1qFutureVlanIndex

Column	Syntax	OID
dot1qFutureVlanUnicastMacLimit The Limiting value on the number of distinct unicast MAC addresses learnt in a VLAN. The lower limit and upper limit value that can be SET for this object is determined by the underlying hardware. Value 0 means unlimit…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.1.65.1.17.1.1
dot1qFutureVlanAdminMacLearningStatus A Truth value used to configure the unicast MAC learning Admin status the VLAN to either be enabled (1) or disabled (2) or default (3). Configuring this object to default behaviour is governed by value configured for …	MacLearningStatusr/w Type Values: 1 enabled 2 disabled 3 default	.1.3.6.1.4.1.10876.101.1.65.1.17.1.2
dot1qFutureVlanOperMacLearningStatus A Truth value indicating the unicast MAC learning enabled/disabled Operational status for the specified VLAN. If the VLAN does not have any member port, then the Mac Learning Status for this VLAN will always be disabled…	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.65.1.17.1.3
dot1qFutureVlanPortFdbFlush If this object is set as 'true', then all the dynamically learnt MAC addresses in specified Vlan will be removed. After flush this object is set to 'false'	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.65.1.17.1.4

An extention to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame.

dot1qFutureVlanTpFdbEntry row .1.3.6.1.4.1.10876.101.1.65.1.19.1

Information about the pseudowire on which MAC address was
learned

Indexes

No indexes recorded

Column	Syntax	OID
dot1qFutureVlanTpFdbPw Either the value '0', or the pseudowire number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the entry was le…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.65.1.19.1.1
dot1qTpOldFdbPort This object is useful for generating the source relearning trap. When a get is performed on this object, it returns the value of Zero(0), so that ISS walk doesn't break. It indicates the port through which the mac-addr…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.65.1.19.1.2
dot1qFutureConnectionIdentifier This object is to associate the backbone MAC address of the peer backbone edge brige with customer Mac addresses that can be reached through the peer backbone edge bridge.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.65.1.19.1.3

Wild card vlan (Id : 0xFFF) static filtering information 
will be used for all Vlans for which there is no specific 
Static filtering exists in dot1qStaticUnicastTable or 
dot1qStaticMulticastTable.

dot1qFutureVlanWildCardEntry row .1.3.6.1.4.1.10876.101.1.65.1.20.1

WildCard vlan filtering Information configured into device by
management specifying set of ports to which frames received
from any port and for any vlan containing this wild card mac
address as destination address and f…

Indexes

dot1qFutureVlanWildCardMacAddress

Column	Syntax	OID
dot1qFutureVlanWildCardMacAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Unicast, Multicast or Broadcast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.65.1.20.1.1
dot1qFutureVlanWildCardEgressPorts The set of ports to which frames received from a specific port and destined for dot1qFutureVlanWildCardMacAddress address must be forwarded, if there is no specific static filtering entry exist for this MAC.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.10876.101.1.65.1.20.1.2
dot1qFutureVlanWildCardRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.65.1.20.1.3

A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address.  Entries are valid for unicast
addresses only.

dot1qFutureStaticUnicastExtnEntry row .1.3.6.1.4.1.10876.101.1.65.1.21.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…

Indexes

No indexes recorded

Column	Syntax	OID
dot1qFutureStaticConnectionIdentifier This object is to associate the backbone MAC address of the peer backbone edge bridge with customer Mac addresses that can be reached through the peer backbone edge bridge.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.65.1.21.1.1

Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP packets.
This table contains information on Subnet-VlanId address mapping.

dot1qFutureVlanPortSubnetMapEntry row .1.3.6.1.4.1.10876.101.1.65.1.25.1

Entry that contains Vlan-Subnet address mapping.

Indexes

dot1qFutureVlanPortSubnetMapAddr

Column	Syntax	OID
dot1qFutureVlanPortSubnetMapAddr The Source IP-Subnet address for which the Vlan mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.65.1.25.1.1
dot1qFutureVlanPortSubnetMapVid The Vlan to which the Source IP-Subnet address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.1.65.1.25.1.2
dot1qFutureVlanPortSubnetMapRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.65.1.25.1.4

An extension to dot1qVlanStaticTable VLAN table.
This table contains the Private Vlan (PVLAN) related
configurations.

dot1qFutureStVlanExtEntry row .1.3.6.1.4.1.10876.101.1.65.1.29.1

Each entry specifies the Private Vlan configuration done for
a given Vlan.

Indexes

No indexes recorded

Column	Syntax	OID
dot1qFutureStVlanPVlanType This object identifies the Private vlan type for this vlan. normal - Vlan does not belong to any Private VLAN domain. primary - Primary vlan in a Private VLAN domain. isolated - Isolated vlan in a Private VLAN dom…	Enumerationr/w Enumerated Values: 1 normal 2 primary 3 isolated 4 community	.1.3.6.1.4.1.10876.101.1.65.1.29.1.1
dot1qFutureStVlanPrimaryVid This object identifies the primary vlan assoicated with this vlan. For primary and normal vlans, this object will have the value zero and configuring this object to non-zero value will not be allowed for them. For se…	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.10876.101.1.65.1.29.1.2

Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.

dot1qFutureVlanPortSubnetMapExtEntry row .1.3.6.1.4.1.10876.101.1.65.1.30.1

Entry that contains Vlan-Subnet address mapping.

Indexes

dot1qFutureVlanPortSubnetMapExtAddr dot1qFutureVlanPortSubnetMapExtMask

Column	Syntax	OID
dot1qFutureVlanPortSubnetMapExtAddr The Source IP address for which the Vlan mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.65.1.30.1.1
dot1qFutureVlanPortSubnetMapExtMask The Subnet Mask for which the Vlan mapping is present in the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.65.1.30.1.2
dot1qFutureVlanPortSubnetMapExtVid The Vlan to which the Source IP-Subnet address of this entry is mapped to.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.1.65.1.30.1.3
dot1qFutureVlanPortSubnetMapExtRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.65.1.30.1.5