SUPERMICRO-TAC-MIB Table View

This table contains multicast profiles, which is used to filter
incoming IGMP/MLDP reports from customers.

fsTacMcastProfileEntry row .1.3.6.1.4.1.10876.101.2.8.2.1.1

Each profile table entry will contain a table of multicast
information and an access rule (permit or deny).

Indexes

fsTacMcastProfileId fsTacMcastProfileAddrType

Column	Syntax	OID
fsTacMcastProfileId Identifier for the multicast profile entry.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.2.8.2.1.1.1
fsTacMcastProfileAddrType Indicates whether the configured rule is for IPv4 or IPv6 address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.8.2.1.1.2
fsTacMcastProfileAction Indicates whether to allow or deny the channels associated with this profile.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.10876.101.2.8.2.1.1.3
fsTacMcastProfileDescription Description for the profile entry.	OctetStringr/w Constraints: range: 1-128	.1.3.6.1.4.1.10876.101.2.8.2.1.1.4
fsTacMcastProfileStatus The status of a row in the multicast profile table. Using this object new entries can be created in the multicast profile table or the existing entries can be removed.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.8.2.1.1.5

Each multicast profile entry will contain a table of filters
for channels. The filter rule may contain a range of group
and source addresses or specific addresses. A filter rule 
with source address as wild card is used to filter based on 
groups.

fsTacMcastPrfFilterEntry row .1.3.6.1.4.1.10876.101.2.8.2.2.1

Each filter entry can contain entries of the form (Ss-Se, Gs-Ge)
or (*, Gs-Ge) or (Ss-Se, *) or (*,*),
where 'S' refers to a multicast source address,
'G' refers to a multicast group address, 's' refers to start
addre…

Indexes

fsTacMcastProfileId fsTacMcastProfileAddrType fsTacMcastPrfFilterGrpStartAddr fsTacMcastPrfFilterGrpEndAddr fsTacMcastPrfFilterSrcStartAddr fsTacMcastPrfFilterSrcEndAddr

Column	Syntax	OID
fsTacMcastPrfFilterGrpStartAddr This object will contain a multicast group address, which will be the start of multicast group address range. This can be a particular multicast address or 0.0.0.0 which indicates that it is a wild card. For configuring…	OctetString Constraints: range: 4-16	.1.3.6.1.4.1.10876.101.2.8.2.2.1.1
fsTacMcastPrfFilterGrpEndAddr This object will contain a multicast group address, which will be the end of multicast group address range. This can be a particular multicast address or 0.0.0.0 which indicates that it is a wild card. The end address c…	OctetString Constraints: range: 4-16	.1.3.6.1.4.1.10876.101.2.8.2.2.1.2
fsTacMcastPrfFilterSrcStartAddr This object will contain a multicast source address, which will be the start of multicast source address range. This can be a particular ip address or 0.0.0.0 which indicates that it is a wild card. For configuring a s…	OctetString Constraints: range: 4-16	.1.3.6.1.4.1.10876.101.2.8.2.2.1.3
fsTacMcastPrfFilterSrcEndAddr This object will contain a multicast source address, which will be the end of multicast source address range. This can be a particular ip address or 0.0.0.0 which indicates that it is a wild card. The end address cannot…	OctetString Constraints: range: 4-16	.1.3.6.1.4.1.10876.101.2.8.2.2.1.4
fsTacMcastPrfFilterMode This object decides the type of packets to be filtered. 'Include' or 'exclude' is used to apply the filter for include and exclude IGMP/MLD reports respectively. The option 'any' is used to apply the filter for all th…	Enumerationr/w Enumerated Values: 1 include 2 exclude 3 any	.1.3.6.1.4.1.10876.101.2.8.2.2.1.5
fsTacMcastPrfFilterStatus This object is the status of a row in the multicast filter rule entry. Using this object new entries can be created in the multicast filter rule table or the existing entries can be removed or updated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.8.2.2.1.6

This table contains the attributes associated with different
multicast channels i.e. (S, G) entries. If there is a need to 
associate attributes per group, it can be done by giving source 
address as zero.

fsTacMcastChannelEntry row .1.3.6.1.4.1.10876.101.2.8.3.1.1

A particular entry contains the informations about a particular
multicast channel.

Indexes

fsTacMcastChannelAddressType fsTacMcastChannelGrpAddress fsTacMcastChannelSrcAddress

Column	Syntax	OID
fsTacMcastChannelAddressType Indicates whether the channel entry is for IGMP/MLDP.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.8.3.1.1.1
fsTacMcastChannelGrpAddress Multicast group address of this channel.	OctetString Constraints: range: 4-16	.1.3.6.1.4.1.10876.101.2.8.3.1.1.2
fsTacMcastChannelSrcAddress Multicast source address of this channel. This object can be zero. If it is zero, it represent the bandwidth for the group, irrespective of the multicast source.	OctetString Constraints: range: 4-16	.1.3.6.1.4.1.10876.101.2.8.3.1.1.3
fsTacMcastChannelBandWidth The bandwidth that will be required for this channel in Kbps.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.8.3.1.1.4
fsTacMcastChannelRowStatus With this rowstatus object, we can add/delete entries to/from channel table. If there is no row in this table for a channel, that channel will be assumed to have default attributes.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.8.3.1.1.5

This table contains the statistics related to profile table

fsTacMcastPrfStatsEntry row .1.3.6.1.4.1.10876.101.2.8.4.1.1

A particular entry contains the statistics about a particular
profile.

Indexes

fsTacMcastProfileId fsTacMcastProfileAddrType

Column	Syntax	OID
fsTacMcastPrfStatsPortRefCnt The number of profile-to-port mappings configured.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.8.4.1.1.1
fsTacMcastPrfStatsVlanRefCnt The number of profile-to-VLAN mappings configured in the entire system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.8.4.1.1.2