SUPERMICRO-RTMMI-MIB Table View

Information describing the parameters
of RTM's Virtual context

fsMIRtmEntry row .1.3.6.1.4.1.10876.101.2.31.2.1

Information describing the parameters
of one of the RTM's virtual context

Indexes

fsMIRtmContextId

Column	Syntax	OID
fsMIRtmContextId A 32-bit unique context id identifing the RTM virtual Context Minimum value of context ID is 0 (this is for defualt Virtual context. The Max context ID is system dependent and the value is taken care in virtual contex…	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.10876.101.2.31.2.1.1
fsMIRrdRouterId The BGP/OSPF Router Id for the RTM Virtual context.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.31.2.1.2
fsMIRrdFilterByOspfTag To enable distribution of routes from OSPF to BGP/IDRP based on the OSPF tag or the various subfields of the OSPF tag (ref RFC1745 sec 2.1). This filter takes precedence over the common RRD control table.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.2.31.2.1.3
fsMIRrdFilterOspfTag The OSPF tag based on which routes have to be filtered for export to BGP/IDRP	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.2.1.4
fsMIRrdFilterOspfTagMask The bitmask to be applied to fsRrdFilterOspfTag for comparison. This bitmask specifies the fields of the OSPF tag to be considered for filtering.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.2.1.5
fsMIRrdRouterASNumber The Autonomous system number in which this RTM Virtual context is running.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.2.1.6
fsMIRrdAdminStatus The Admin status of this RTM Virtual Context. This object can be set to enabled only after setting the AS number and the Router ID to a valid value.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.31.2.1.7
fsMIRrdForce An option for giving access to the user to change the autonomous number and the router-id and send the update message to the registered protocol.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.31.2.1.8

Control Table for configuring routes allowed/denied
for export, in the virtual RTM context.

fsMIRrdControlEntry row .1.3.6.1.4.1.10876.101.2.31.3.1

An entry of fsMIRrdControlTable.

Indexes

fsMIRtmContextId fsMIRrdControlDestIpAddress fsMIRrdControlNetMask

Column	Syntax	OID
fsMIRrdControlDestIpAddress The destination IP address of this route. This object may not take a Multicast (Class D) address or the reserved address (Class E) value. Any assignment (implicit or otherwise) of an in…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.31.3.1.1
fsMIRrdControlNetMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent con…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.31.3.1.2
fsMIRrdControlSourceProto The Identifier of the source routing protocol. A value of zero will be interpreted as 'any', which may be used to configure interface based route redistribution.	Enumerationr/w Enumerated Values: 0 any 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp	.1.3.6.1.4.1.10876.101.2.31.3.1.3
fsMIRrdControlDestProto The identifier of the destination routing protocol. This field is a bit mask, a 1 indicates that the route has to be exported to the routing protocol corresponding to the bit-position. +---------------------------------…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.3.1.4
fsMIRrdControlRouteExportFlag This flag specifies whether the route is allowed for export or denied.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.10876.101.2.31.3.1.5
fsMIRrdControlRowStatus The status of this row by which a new row can be created or deleted according to the SMIv2 conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.31.3.1.6

Registration Table for the different routing protocols.
This table is read-only and reflects the information of 
routing protocols held by the Route Table Manager.

fsMIRrdRoutingProtoEntry row .1.3.6.1.4.1.10876.101.2.31.4.1

An entry in to the fsRrdRoutingProtoTable.

Indexes

fsMIRtmContextId fsMIRrdRoutingProtoId

Column	Syntax	OID
fsMIRrdRoutingProtoId The Identifier of the routing protocol registered with the RTM virtual context	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp	.1.3.6.1.4.1.10876.101.2.31.4.1.1
fsMIRrdRoutingRegnId The Registeration ID assigned by the RTM Virtual context for this Routing Protocol	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.4.1.2
fsMIRrdRoutingProtoTaskIdent The Name/Identifier of the Routing Task	OctetString	.1.3.6.1.4.1.10876.101.2.31.4.1.3
fsMIRrdRoutingProtoQueueIdent The Name/Identifier of the Message Queue to which messages to the Routing Task are posted.	OctetString	.1.3.6.1.4.1.10876.101.2.31.4.1.4
fsMIRrdAllowOspfAreaRoutes A single configuration parameter that enables administator to have a contol over PERMIT/deny of all OSPF inter-area and intra-area address/mask pairs to be exported into this routing protocol.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.2.31.4.1.5
fsMIRrdAllowOspfExtRoutes A single configuration parameter that enables administator to have a contol over PERMIT/deny of all OSPF Type 1 and Type 2 Exteral address/mask pairs to be exported into this routing protocol.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.2.31.4.1.6

This entity's IP Routing table. This table can be used to 
view all the routes present in the system

fsMIRtmCommonRouteEntry row .1.3.6.1.4.1.10876.101.2.31.5.1

A particular route to a particular destina-
tion, under a particular policy.

Indexes

fsMIRtmContextId fsMIRtmCommonRouteDest fsMIRtmCommonRouteMask fsMIRtmCommonRouteTos fsMIRtmCommonRouteNextHop

Column	Syntax	OID
fsMIRtmCommonRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a valu…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.31.5.1.1
fsMIRtmCommonRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the fsMIRtmCommonRouteDest field. For those systems that do not support arbitrary subnet masks, an ag…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.31.5.1.2
fsMIRtmCommonRouteTos The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+--…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.31.5.1.3
fsMIRtmCommonRouteNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.31.5.1.4
fsMIRtmCommonRouteIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.5.1.5
fsMIRtmCommonRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes …	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote	.1.3.6.1.4.1.10876.101.2.31.5.1.6
fsMIRtmCommonRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp	.1.3.6.1.4.1.10876.101.2.31.5.1.7
fsMIRtmCommonRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.5.1.8
fsMIRtmCommonRouteInfo A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's fsMIRtmCommonRouteProto value. If this information…	ObjectIdentifierr/w	.1.3.6.1.4.1.10876.101.2.31.5.1.9
fsMIRtmCommonRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's fsMIRtmCommonRouteProto value. When this object is unknown or not relevan…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.5.1.10
fsMIRtmCommonRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's fsMIRtmCommonRouteProto value. If this metric is not used, its value sh…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.5.1.11
fsMIRtmCommonRoutePrivateStatus This object is applicapble only for static routes. If the private status is enabled, this route can not be redistributed to other routing protocols.Else the route can be considered for redistribution	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.31.5.1.12
fsMIRtmCommonRouteStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.31.5.1.13
fsMIRtmCommonRouteProvider This object is used to indicates the source where the route was learned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.5.1.14

This entity's IP Policy-Based Routing table. This table can be used to 
view all the Policy-Based routes present in the system

fsMIRtmPBRouteEntry row .1.3.6.1.4.1.10876.101.2.31.7.1

A particular route to a particular destina-
tion, under a particular policy.

Indexes

fsMIRtmContextId fsMIRtmPBRouteIfIndex

Column	Syntax	OID
fsMIRtmPBRouteIfIndex The ifIndex value which identifies the local interface to apply Policy-based routing.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.31.7.1.1
fsMIRtmPBRouteMapName The route map name is used for Policy-Based routing. - One interface can configure only one route map. - The route map is applicable for policy-base routing only when it has single Match Source, Set Next-hop in the …	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.10876.101.2.31.7.1.2
fsMIRtmPBRouteEntryStatus Entry Status of the row in the PBR table. NotInService (2) and createAndGo (4)are not supported to write opertion. createAndWait (5) is used to create a new row with IP interface index. Then set route map name and activ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.31.7.1.3