SUPERMICRO-RIP6-MIB Table View

The table contains Instance related parameters. This table is
a global table i.e. its not instance specific.

fsrip6InstanceEntry row .1.3.6.1.4.1.10876.101.1.3.2.1.1

The entry in the IPv6 RIP Instance Table. An entry is
created/deleted in this table when the corresponding
RIP6 instance is created/deleted.

Indexes

fsrip6InstanceIndex

Column	Syntax	OID
fsrip6InstanceIndex The index value which uniquely identifies the RIPng Instance.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.10876.101.1.3.2.1.1.1
fsrip6InstanceStatus The status of the specific Instance whether UP or DOWN.	Enumerationr/w Enumerated Values: 0 down 1 up	.1.3.6.1.4.1.10876.101.1.3.2.1.1.2

The table contains Instance-If mapping parametersits. This is 
a global table ie its not instance specific.

fsrip6InstIfMapEntry row .1.3.6.1.4.1.10876.101.1.3.2.2.1

The entry in this table is created whenever an Interface gets
attached to an Instance and deleted whenever and Instance get
deleted or an Interface gets detached from an Instance.

Indexes

fsrip6IfIndex

Column	Syntax	OID
fsrip6IfIndex The index value which uniquely identifies the RIPng Interface.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.3.2.2.1.1
fsrip6InstIfMapInstId The index value which uniquely identifies the RIPng Instance to which a RIPng Interface is attached. When a row is created in this table this object is assigned the value of fsrip6GlobalInstanceIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.3.2.2.1.2
fsrip6InstIfMapIfAtchStatus The attachment status of a RIPng Interface, whether attached to an instance or not.	Enumerationr/w Enumerated Values: 0 detached 1 attached	.1.3.6.1.4.1.10876.101.1.3.2.2.1.3

The table containing interface-related RIPng parameters.

fsrip6RipIfEntry row .1.3.6.1.4.1.10876.101.1.3.2.3.1

The entry in the IPv6 RIP Interface Table. An entry is
created/deleted in this table when corresponding
IPv6 interface is created/deleted.

Indexes

fsrip6RipIfIndex

Column	Syntax	OID
fsrip6RipIfIndex The index value which uniquely identifies the IPv6 interface on which this fsrip6RipIfEntry exists. The interface identified by a particular value of this index is the same interface as identified by the same value of f…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.3.2.3.1.1
fsrip6RipIfProfileIndex Index into the RIPng Profile Table which contains the RIPng parameters for this interface.	Integer32r/w Constraints: range: 0-9	.1.3.6.1.4.1.10876.101.1.3.2.3.1.2
fsrip6RipIfCost The 'cost' associated with this interface. This 'cost' is added to the metric of all routes learnt over this interface before they are installed in the routing table.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.10876.101.1.3.2.3.1.3
fsrip6RipIfOperStatus The operational status of this interface and whether RIPng is enabled/disabled on it.	Enumeration Enumerated Values: 1 enabledup 2 enableddown 3 disabledup 4 disableddown	.1.3.6.1.4.1.10876.101.1.3.2.3.1.4
fsrip6RipIfProtocolEnable RIPng is enabled over this Interface or Not.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.1.3.2.3.1.5
fsrip6RipIfInMessages Number of RIPng messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.6
fsrip6RipIfInRequests Number of RIPng Requests received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.7
fsrip6RipIfInResponses Number of RIPng Responses received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.8
fsrip6RipIfUnknownCmds Number of RIPng packets with unknown command received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.9
fsrip6RipIfInOtherVer Number of RIPng packets received with other version on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.10
fsrip6RipIfInDiscards Number of received RIPng packets that were discarded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.11
fsrip6RipIfOutMessages Number of RIPng messages sent out on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.12
fsrip6RipIfOutRequests Number of RIPng Requests sent out on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.13
fsrip6RipIfOutResponses Number of RIPng Responses sent out on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.14
fsrip6RipIfOutTrigUpdates Number of triggered updates sent out on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.3.2.3.1.15
fsrip6RipIfDefRouteAdvt This Object controls the advertisement of default route over this interface.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.10876.101.1.3.2.3.1.16

The table containing RIPng related configurable parameters
which are maintained as a profile and referred by the
fsrip6RipIfTable.

fsrip6RipProfileEntry row .1.3.6.1.4.1.10876.101.1.3.2.4.1

The entry in the IPv6 Address Profile Table which contains
RIPng parameters. One or more RIP interfaces refer to this
profile through the object fsrip6RipIfProfileIndex in the
fsrip6RipIfTable. An entry of this table ot…

Indexes

fsrip6RipProfileIndex

Column	Syntax	OID
fsrip6RipProfileIndex A unique value identifying the particular IPv6 RIP profile. This is referred by fsrip6RipIfProfileIndex of the IPv6 RIP interface Table.	Integer32 Constraints: range: 0-9	.1.3.6.1.4.1.10876.101.1.3.2.4.1.1
fsrip6RipProfileStatus Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2).	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.10876.101.1.3.2.4.1.2
fsrip6RipProfileHorizon Indicates the type of horizoning to be done while sending routing informations (learnt on that interface) over that interface. If the configured value is split-horizon(2) then routes learnt on a interface are not sent o…	Enumerationr/w Enumerated Values: 1 nohorizon 2 splithorizon 3 poisonreverse	.1.3.6.1.4.1.10876.101.1.3.2.4.1.3
fsrip6RipProfilePeriodicUpdTime Indicates the interval in seconds between the periodic RIPng updates.	Integer32r/w Constraints: range: 30-500	.1.3.6.1.4.1.10876.101.1.3.2.4.1.4
fsrip6RipProfileTrigDelayTime Indicates the time interval in seconds by which further triggered updates are delayed after one triggered update is sent.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.10876.101.1.3.2.4.1.5
fsrip6RipProfileRouteAge Indicates the period in seconds for which a dynamic route will be kept in the IPv6 RIP routing table without receiving any updates for the route. After this time interval, the route will not be valid and will be aged ou…	Integer32r/w Constraints: range: 180-500	.1.3.6.1.4.1.10876.101.1.3.2.4.1.6
fsrip6RipProfileGarbageCollectTime Indicates the period in seconds for which a route which has aged out is retained in the IPv6 RIP Routing Table. After this time interval the route is deleted from the IPv6 RIP Routing Table.	Integer32r/w Constraints: range: 120-180	.1.3.6.1.4.1.10876.101.1.3.2.4.1.7

This table contains dynamic routes that are learnt
through RIPng protocol as well as non-RIPng routes learnt
via redistribution.

fsrip6RipRouteEntry row .1.3.6.1.4.1.10876.101.1.3.2.5.1

An entry in the RIPng Routing Table. An entry can be created
by means of the RIPng protocol and redistributed routes from
IPv6. There can be a non-RIPng route as well as a RIPng route
with the same destination and prefi…

Indexes

fsrip6RipRouteDest fsrip6RipRoutePfxLength fsrip6RipRouteProtocol fsrip6RipRouteIfIndex

Column	Syntax	OID
fsrip6RipRouteDest The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.1.3.2.5.1.1
fsrip6RipRoutePfxLength Indicates the prefix length of the destination address.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.10876.101.1.3.2.5.1.2
fsrip6RipRouteProtocol The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 ndisc 5 rip 6 ospf 7 idrp	.1.3.6.1.4.1.10876.101.1.3.2.5.1.3
fsrip6RipRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.3.2.5.1.4
fsrip6RipRouteNextHop Next hop IPv6 Address for this route. For direct routes it has the value ::0.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.1.3.2.5.1.5
fsrip6RipRouteMetric The routing metric associated with this route. A metric of 16 indicates infinity implying the route is no longer valid.	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.1.3.2.5.1.6
fsrip6RipRouteTag This object specifies whether this route is an internal or external route. Value 0 represent routes are internal to the routing domain and Value > 0 represent routes are external to the routing domain.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.3.2.5.1.7
fsrip6RipRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. For statically configured routes and locally derived routes, this object has value 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.3.2.5.1.8

This table contains the Addresses of those Peers  
whose RIPng Responses are to be accepted or denied

fsrip6RipPeerEntry row .1.3.6.1.4.1.10876.101.1.3.2.6.1

Single entity in the fsrip6RipPeerTable.

Indexes

fsrip6RipPeerAddr

Column	Syntax	OID
fsrip6RipPeerAddr The Address of the Peer, from whom Responses are to be Allowed or Denied	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.1.3.2.6.1.1
fsrip6RipPeerEntryStatus 'valid' indicated presence of the entry. 'invalid' means the entry is unavailable.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.10876.101.1.3.2.6.1.2

This table contains the routes which are 
NOT to be advertised in the RIPng Responses sent
by the router, if fsrip6AdvFilter is enabled

fsrip6RipAdvFilterEntry row .1.3.6.1.4.1.10876.101.1.3.2.7.1

Single entity in the fsrip6RipAdvFilterTable

Indexes

fsrip6RipAdvFilterAddress

Column	Syntax	OID
fsrip6RipAdvFilterAddress The route(s) with this address is NOT to be advertised to the Peers, if fsrip6AdvFilter is enabled	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.1.3.2.7.1.1
fsrip6RipAdvFilterStatus 'valid' indicated presence of the entry. 'invalid' means the entry is unavailable.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.10876.101.1.3.2.7.1.2

A table describing the configuration of filtering for route map.

fsRip6DistInOutRouteMapEntry row .1.3.6.1.4.1.10876.101.1.3.3.1.1

Information describing the filtering configuration of single entry.

Indexes

fsRip6DistInOutRouteMapName fsRip6DistInOutRouteMapType

Column	Syntax	OID
fsRip6DistInOutRouteMapName Route map name.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.10876.101.1.3.3.1.1.1
fsRip6DistInOutRouteMapType Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.10876.101.1.3.3.1.1.3
fsRip6DistInOutRouteMapValue Distance value ( this will be unused for distribute list )	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.10876.101.1.3.3.1.1.4
fsRip6DistInOutRouteMapRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.3.3.1.1.5