SUPERMICRO-PBB-MIB Table View

This table lists the additional PBB parameters for each
VIP.  Entries in this table must be persistent over power
up restart/reboot.

fsPbbVipEntry row .1.3.6.1.4.1.10876.101.2.14.1.1.2.1

Each entry consists of the name string, I-SID, Default
Destination MAC, Service Type, and possible B-MAC.

Indexes

fsdot1ahContextId IF-MIBifIndex

Column	Syntax	OID
fsdot1ahContextId Identifies a virtual context.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.14.1.1.2.1.1
fsPbbVipPipIfIndex Identifies the PIP associated with this VIP within the BEB. A value of zero indicates the VIP is not currently associated with any PIP. The value of this object must be persistent across reinitializations…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.2.14.1.1.2.1.2
fsPbbVipISid The I-SID for this VIP. Within an I-Component, an VIP can only be serviced by one I-SID. And the ISID is a configurable parameter of the VIP. The value of this object must be persistent acr…	IEEE8021-TC-MIBIEEE8021PbbServiceIdentifierOrUnassignedr/w Type Constraints: range: 1 range: 256..16777214	.1.3.6.1.4.1.10876.101.2.14.1.1.2.1.3
fsPbbVipDefaultDstBMAC The Default Destination B-MAC for this VIP.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.14.1.1.2.1.4
fsPbbVipType This feature is used to support asymmetic VLANs. The value of this object must be persistent across reinitializations of the management system.	IEEE8021-TC-MIBIEEE8021PbbIngressEgressr/w Type Values: 0 ingress 1 egress	.1.3.6.1.4.1.10876.101.2.14.1.1.2.1.5
fsPbbVipRowStatus This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the correspondi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.14.1.1.2.1.6

This table contains a cross-reference of I-SID values
to the VIPs with which they are associated.  This allows
VIPs to be located easily by their associated I-SID.

fsPbbISidToVipEntry row .1.3.6.1.4.1.10876.101.2.14.1.1.3.1

A mapping from an I-SID to the VIP whith which it is
associated. An entry will exist for each entry in
the fsPbbVipTable.

Indexes

fsPbbISidToVipISid

Column	Syntax	OID
fsPbbISidToVipISid The I-SID of a VIP.	IEEE8021-TC-MIBIEEE8021PbbServiceIdentifier Type Constraints: range: 256..16777214	.1.3.6.1.4.1.10876.101.2.14.1.1.3.1.1
fsPbbISidToVipComponentId The component identifier of the VIP to which this I-SID is associated.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.14.1.1.3.1.2
fsPbbISidToVipPort The port number of the VIP to which this I-SID is associated.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.14.1.1.3.1.3

This table contains the parameters for each PIP, and
can be used to configure the PIP port names. An entry 
in this table is internally created and made active 
once a PIP is created from if mib itself Entries
in this table must be persistent over power up
restart/reboot.

fsPbbPipEntry row .1.3.6.1.4.1.10876.101.2.14.1.1.4.1

The parameters for a PIP.

Indexes

fsPbbPipIfIndex

Column	Syntax	OID
fsPbbPipIfIndex The number identifying the PIP.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.14.1.1.4.1.1
fsPbbPipBMACAddress The B-MAC used by this PIP for the B-SA.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.14.1.1.4.1.2
fsPbbPipName A text string of local significance which identifies the PIP within a BEB.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.10876.101.2.14.1.1.4.1.3
fsPbbPipIComponentId Identifies the I-component associated with this PIP.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.14.1.1.4.1.4
fsPbbPipRowStatus Indicates the status of an entry in this table, and is used to fetch the status of PIP entries. An entry in this table is internally created and made active o nce a PIP is created from if mib itself	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.14.1.1.4.1.5

This table lists VIPs and the PIP to which each is
associated, and allows the PIP associated with each
VIP to be configured.  Entries in this table must be
persistent over power up restart/reboot.

fsPbbVipToPipMappingEntry row .1.3.6.1.4.1.10876.101.2.14.1.1.5.1

The index ifindex in the table is specifed as VIP's
interface index.

Indexes

fsdot1ahContextId IF-MIBifIndex

Column	Syntax	OID
fsPbbVipToPipMappingPipIfIndex The PIP's interface number.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.14.1.1.5.1.1
fsPbbVipToPipMappingStorageType Indicates the storage type of this entry. An entry whose storage type is permanent(4) need not allow write access to other columns in that entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.10876.101.2.14.1.1.5.1.2
fsPbbVipToPipMappingRowStatus Indicates the status of an entry in this table, and is used to create/delete entries. The corresponding instance of fsPbbVipToPipMappingPipIfIndex must be set before this object can be made active(1). …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.14.1.1.5.1.3

The CBP table of I-SID values (6.11).  The contents of this
table are not persistent over power up restart/reboot.

fsPbbCBPServiceMappingEntry row .1.3.6.1.4.1.10876.101.2.14.1.1.6.1

Each entry includes the B-VID to carry and optionally an
I-SID for mapping I-SIDs normally used at a Peer E-NNI
(6.11, 26.6.2). The table is indexed by the component ID
of the relevant B-Component of the PBB, the Brid…

Indexes

fsdot1ahContextId IF-MIBifIndex fsPbbCBPServiceMappingBackboneSid

Column	Syntax	OID
fsPbbCBPServiceMappingBackboneSid The I-SID value used between the PIP and CBP.	IEEE8021-TC-MIBIEEE8021PbbServiceIdentifier Type Constraints: range: 256..16777214	.1.3.6.1.4.1.10876.101.2.14.1.1.6.1.1
fsPbbCBPServiceMappingBVid The B-VID which will carry this service instance.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.2.14.1.1.6.1.2
fsPbbCBPServiceMappingDefaultBackboneDest A default destination B-MAC for the CBP to use.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.14.1.1.6.1.3
fsPbbCBPServiceMappingType Used for Pt-MPt service where ingress or egress limiting is desired.	IEEE8021-TC-MIBIEEE8021PbbIngressEgressr/w Type Values: 0 ingress 1 egress	.1.3.6.1.4.1.10876.101.2.14.1.1.6.1.4
fsPbbCBPServiceMappingLocalSid The I-SID which will be transmitted over the PBBN.	IEEE8021-TC-MIBIEEE8021PbbServiceIdentifierOrUnassignedr/w Type Constraints: range: 1 range: 256..16777214	.1.3.6.1.4.1.10876.101.2.14.1.1.6.1.5
fsPbbCBPServiceMappingRowStatus Indicates the status of an entry in this table, and is used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.14.1.1.6.1.6

This table is used to fetch the status of Customer
Backbone Ports in a PBB.
          
Entries in this table must be persistent across reinitializations
of the management system.

fsPbbCbpEntry row .1.3.6.1.4.1.10876.101.2.14.1.1.7.1

An entry representing a dynamically created CBP in a PBB.

Indexes

fsdot1ahContextId IF-MIBifIndex

Column	Syntax	OID
fsPbbCbpRowStatus This object is used for fetching the status of entries in this table. It will be internally set to active once a CBP is created using the if mib.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.14.1.1.7.1.1

This table provides list of VIPs for a given PIP

fsPbbPipToVipMappingEntry row .1.3.6.1.4.1.10876.101.2.14.1.1.8.1

Gives PIP to VIP mapping where both are index to the table
and mapping status is stored to specify if a VIP maps to a PIP or not

Indexes

fsdot1ahContextId fsPbbPipIfIndex IF-MIBifIndex

Column	Syntax	OID
fsPbbPipToVipMappingStatus PIP to VIP mapping status. True specifies that the given VIP maps to a PIP. This mib object always returns True.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.14.1.1.8.1.1