SUPERMICRO-OSPFV3-TEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
8

futOspfv3TestIfTable

table
.1.3.6.1.4.1.10876.101.1.301.1 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3TestIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-TEST-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-TEST-MIB::futOspfv3TestIfTable' 
The OSPFv3 Interface Table describes the  inter- 
faces from the viewpoint of OSPFv3.
futOspfv3TestIfEntry row .1.3.6.1.4.1.10876.101.1.301.1.1
The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.
Indexes
Column Syntax OID
futOspfv3TestIfIndex
The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.1.301.1.1.1
futOspfv3TestDemandTraffic
Simulation for indicating the data traffic open/close
indication from lower layer for demand circuit
neighbor probing feature.
Enumerationr/w
Enumerated Values:
1open
2close
 .1.3.6.1.4.1.10876.101.1.301.1.1.2

futOspfv3ExtRouteTable

table
.1.3.6.1.4.1.10876.101.1.301.2 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3ExtRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-TEST-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-TEST-MIB::futOspfv3ExtRouteTable' 
The OSPFv3 External Route Table describes the  
External Routes information.
futOspfv3ExtRouteEntry row .1.3.6.1.4.1.10876.101.1.301.2.1
The OSPFv3 External Route Table describes the
External Routes information.
Indexes
Column Syntax OID
futOspfv3ExtRouteDestType
The prefix type of futOspfv3ExtRouteDestType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.1.301.2.1.1
futOspfv3ExtRouteDest
The Desitnation IPv6 Address of this route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.301.2.1.2
futOspfv3ExtRoutePfxLength
Indicates the prefix length of the destination Address.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.10876.101.1.301.2.1.3
futOspfv3ExtRouteNextHopType
The prefix type offutOspfv3ExtRouteNextHopType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.1.301.2.1.4
futOspfv3ExtRouteNextHop
Next Hop IPv6 Address for this route. For direct routes it has the
value ::0.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.301.2.1.5
futOspfv3ExtRouteStatus
The variable dispalys the status of the entry. Only createAndGo (4) and Destroy (6) are supported
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.301.2.1.6