SUPERMICRO-OSPFV3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
58

futOspfv3IfTable

table
.1.3.6.1.4.1.10876.101.1.90.2 · 1 row entry · 21 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-MIB::futOspfv3IfTable' 
The OSPFv3 Interface Table describes the  inter-
faces from the viewpoint of OSPFv3.
futOspfv3IfEntry row .1.3.6.1.4.1.10876.101.1.90.2.1
The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.
Indexes
Column Syntax OID
futOspfv3IfIndex
The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.1.90.2.1.1
futOspfv3IfOperState
This gives the Operational Status of the Interface.
Enumeration
Enumerated Values:
1operup
2operdown
3loopback
4unloop
 .1.3.6.1.4.1.10876.101.1.90.2.1.2
futOspfv3IfPassive
This object is used to make the inteface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.90.2.1.3
futOspfv3IfNbrCount
This gives the Total number of Neighbour's through
that Interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.4
futOspfv3IfAdjCount
This gives the Total number of Adjacencies through
that Interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.5
futOspfv3IfHelloRcvd
This gives the Total number of Hello packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.6
futOspfv3IfHelloTxed
This gives the Total number of Hello packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.7
futOspfv3IfHelloDisd
This gives the Total number of Hello packets
discarded through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.8
futOspfv3IfDdpRcvd
This gives the Total number of Ddp packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.9
futOspfv3IfDdpTxed
This gives the Total number of Ddp packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.10
futOspfv3IfDdpDisd
This gives the Total number of Ddp packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.11
futOspfv3IfLrqRcvd
This gives the Total number of Lrq packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.12
futOspfv3IfLrqTxed
This gives the Total number of Lrq packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.13
futOspfv3IfLrqDisd
This gives the Total number of Lrq packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.14
futOspfv3IfLsuRcvd
This gives the Total number of Lsu packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.15
futOspfv3IfLsuTxed
This gives the Total number of Lsu packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.16
futOspfv3IfLsuDisd
This gives the Total number of Lsu packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.17
futOspfv3IfLakRcvd
This gives the Total number of Lak packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.18
futOspfv3IfLakTxed
This gives the Total number of Lak packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.19
futOspfv3IfLakDisd
This gives the Total number of Lak packets discarded
on that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.90.2.1.20
futOspfv3IfLinkLSASuppression
Specifies whether or not link LSA origination is
suppressed for networks other than broadcast or NBMA.
The object is set to value true (1) to suppress
the origination.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.90.2.1.21

futOspfv3RoutingTable

table
.1.3.6.1.4.1.10876.101.1.90.3 · 1 row entry · 10 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3RoutingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-MIB::futOspfv3RoutingTable' 
A table of routing information.
futOspfv3RoutingEntry row .1.3.6.1.4.1.10876.101.1.90.3.1
The information regarding a single route.
Indexes
Column Syntax OID
futOspfv3RouteDestType
The prefix type of futOspfv3RouteDestType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.1.90.3.1.1
futOspfv3RouteDest
The Desitnation IPv6 Address of this route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.90.3.1.2
futOspfv3RoutePfxLength
Indicates the prefix length of the destination Address.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.10876.101.1.90.3.1.3
futOspfv3RouteNextHopType
The prefix type offutOspfv3RouteNextHopType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.1.90.3.1.4
futOspfv3RouteNextHop
Next Hop IPv6 Address for this route. For direct routes it has the
value ::0.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.90.3.1.5
futOspfv3RouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
3type1External
4type2External
 .1.3.6.1.4.1.10876.101.1.90.3.1.6
futOspfv3RouteAreaId
Area ID associated with the route
OSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.90.3.1.7
futOspfv3RouteCost
It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedenc…
OSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.10876.101.1.90.3.1.8
futOspfv3RouteType2Cost
Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the…
OSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.10876.101.1.90.3.1.9
futOspfv3RouteInterfaceIndex
Interface Index associated with the route
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.10876.101.1.90.3.1.10

futOspfv3AsExternalAggregationTable

table
.1.3.6.1.4.1.10876.101.1.90.4 · 1 row entry · 7 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3AsExternalAggregationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-MIB::futOspfv3AsExternalAggregationTable' 
Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated.
futOspfv3AsExternalAggregationEntry row .1.3.6.1.4.1.10876.101.1.90.4.1
Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed.
Indexes
Column Syntax OID
futOspfv3AsExternalAggregationNetType
The prefix type of futOspfv3AsExternalAggregationNetType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.1.90.4.1.1
futOspfv3AsExternalAggregationNet
The IPv6 address of the Net indicated by
the range.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.90.4.1.2
futOspfv3AsExternalAggregationPfxLength
The prefix length that pertains to the
range.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.10876.101.1.90.4.1.3
futOspfv3AsExternalAggregationAreaId
Refer to description in futOspfv3AsExternalAggregationEffect.
OSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.90.4.1.4
futOspfv3AsExternalAggregationEffect
Indicates whether Type-5/Type-7 will be aggregated or not
generated for the specified range.
When set to 'allowAll' (3) and associated areaId is 0.0.0.0
aggregated Type-5 are generated for the specified range. In
addit…
Enumerationr/w
Enumerated Values:
1advertise
2doNotAdvertise
3allowAll
4denyAll
 .1.3.6.1.4.1.10876.101.1.90.4.1.5
futOspfv3AsExternalAggregationTranslation
This when set to enabled, P Bit is set in
the generated Type-7 LSA. When set disabled
P Bit is clear in the generated Type-7 LSA
for the range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.90.4.1.6
futOspfv3AsExternalAggregationStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.90.4.1.7

futOspfv3BRRouteTable

table
.1.3.6.1.4.1.10876.101.1.90.5 · 1 row entry · 8 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3BRRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-MIB::futOspfv3BRRouteTable' 
A table of routing information.
futOspfv3BRRouteEntry row .1.3.6.1.4.1.10876.101.1.90.5.1
The information regarding a single route.
Indexes
Column Syntax OID
futOspfv3BRRouteDest
Router Id of the destination router.
ABR/ASBR entries will have Router Id as
the destination network Id
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.90.5.1.1
futOspfv3BRRouteNextHopType
The prefix type of futOspfv3BRRouteNextHopType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.1.90.5.1.2
futOspfv3BRRouteNextHop
Next Hop IPv6 Address for this route. For direct
routes it has the value ::0.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.90.5.1.3
futOspfv3BRRouteDestType
Type of the route. The route can be ABR route
entry or ASBR route entry
Enumeration
Enumerated Values:
2areaBorder
3asBoundary
 .1.3.6.1.4.1.10876.101.1.90.5.1.4
futOspfv3BRRouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
 .1.3.6.1.4.1.10876.101.1.90.5.1.5
futOspfv3BRRouteAreaId
Area ID associated with the route
OSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.90.5.1.6
futOspfv3BRRouteCost
The cost associated with the route
OSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.10876.101.1.90.5.1.7
futOspfv3BRRouteInterfaceIndex
Interface Index associated with the route
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.1.90.5.1.8

futOspfv3RedistRouteCfgTable

table
.1.3.6.1.4.1.10876.101.1.90.6 · 1 row entry · 8 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3RedistRouteCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-MIB::futOspfv3RedistRouteCfgTable' 
A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.
futOspfv3RedistRouteCfgEntry row .1.3.6.1.4.1.10876.101.1.90.6.1
Information describing the configuration of single route entry.
Indexes
Column Syntax OID
futOspfv3RedistRouteDestType
The prefix type of futOspfv3RedistRouteDestType. Only
IPv6 addresses are expected.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.1.90.6.1.1
futOspfv3RedistRouteDest
IPv6 Address of the Destination route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.90.6.1.2
futOspfv3RedistRoutePfxLength
Prefix Length of the Destination route.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.10876.101.1.90.6.1.3
futOspfv3RedistRouteMetric
The Metric value applied to the route before it is adv. into the
OSPFv3 Domain.
OSPF-MIBBigMetricr/w
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.10876.101.1.90.6.1.4
futOspfv3RedistRouteMetricType
The Metric Type applied to the route before it is adv. into the
OSPFv3 Domain
Enumerationr/w
Enumerated Values:
3type1External
4type2External
 .1.3.6.1.4.1.10876.101.1.90.6.1.5
futOspfv3RedistRouteTagType
The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the futOspfv3RedistRouteTag
MIB has to be set with the Tag value needed.
Enumerationr/w
Enumerated Values:
1manual
2automatic
 .1.3.6.1.4.1.10876.101.1.90.6.1.6
futOspfv3RedistRouteTag
The Route Tag in case the user configures a Manual option for
the tags.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.90.6.1.7
futOspfv3RedistRouteStatus
The variable dispalys the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.90.6.1.8

futOspfv3DistInOutRouteMapTable

table
.1.3.6.1.4.1.10876.101.1.90.8.1 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk futOspfv3DistInOutRouteMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFV3-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFV3-MIB::futOspfv3DistInOutRouteMapTable' 
A table describing the configuration of filtering for route map.
futOspfv3DistInOutRouteMapEntry row .1.3.6.1.4.1.10876.101.1.90.8.1.1
Information describing the filtering configuration of single entry.
Indexes
Column Syntax OID
futOspfv3DistInOutRouteMapName
Route map name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.10876.101.1.90.8.1.1.1
futOspfv3DistInOutRouteMapType
Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.10876.101.1.90.8.1.1.2
futOspfv3DistInOutRouteMapValue
Distance value ( this will be unused for distribute list )
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.10876.101.1.90.8.1.1.3
futOspfv3DistInOutRouteMapRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.90.8.1.1.4