SUPERMICRO-OSPF-TE-MIB Table View

The OSPF-TE Process's Link State Database containing Router LSA,
Network LSA , Type 10 Opaque LSA which holds Router Adrress TLVs and 
	Link TLVs. This TE database contains only self originated Router
	LSA.

futOspfTeLsdbEntry row .1.3.6.1.4.1.10876.101.1.72.2.1

A single Link State Advertisement.

Indexes

futOspfTeLsdbAreaId futOspfTeLsdbType futOspfTeLsdbLsid futOspfTeLsdbRouterId

Column	Syntax	OID
futOspfTeLsdbAreaId The 32 bit identifier of the Area from which the LSA was received or originated.	AreaID	.1.3.6.1.4.1.10876.101.1.72.2.1.1
futOspfTeLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format.	Enumeration Enumerated Values: 1 routerLSA 2 networkLSA 10 type10OpaqueLSA	.1.3.6.1.4.1.10876.101.1.72.2.1.2
futOspfTeLsdbLsid The Link State ID is an LS Type Specific field that identifies the piece of the routing domain that is being described by the advertisement for Router and Network LSAs. For Type 10 LSA the format is 0x01 0x00…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.2.1.3
futOspfTeLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	RouterID	.1.3.6.1.4.1.10876.101.1.72.2.1.4
futOspfTeLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.2.1.5
futOspfTeLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.72.2.1.6

The OSPF-TE database Type 9 LSAs.

futOspfTeType9LsdbEntry row .1.3.6.1.4.1.10876.101.1.72.3.1

A single Type 9 TE LSA.

Indexes

futOspfTeType9LsdbIfIpAddress futOspfTeType9LsdbIfIndex futOspfTeType9LsdbLsid futOspfTeType9LsdbRouterId

Column	Syntax	OID
futOspfTeType9LsdbIfIpAddress Interface Index associated with the Interface	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.3.1.1
futOspfTeType9LsdbIfIndex Interface Index associated with the Interface	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.72.3.1.2
futOspfTeType9LsdbLsid The Link State ID is an LS Type Specific field containing the Opaque Type and Opaque ID.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.3.1.3
futOspfTeType9LsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	RouterID	.1.3.6.1.4.1.10876.101.1.72.3.1.4
futOspfTeType9LsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.3.1.5
futOspfTeType9LsdbAdvertisement The entire TYPE9 Opaque Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.72.3.1.6

Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.

futOspfTeAreaEntry row .1.3.6.1.4.1.10876.101.1.72.4.1

Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.

Indexes

futOspfTeAreaId

Column	Syntax	OID
futOspfTeAreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	AreaID	.1.3.6.1.4.1.10876.101.1.72.4.1.1
futOspfTeAreaLsaCount This gives the count of how many LSAs attached to this area only type 10 and type 2.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.4.1.2
futOspfTeType10AreaCksumSum This gives the sum of TE LSA check sum installed in the TE Data base associated with this area.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.4.1.3
futOspfTeType2AreaCksumSum This gives the sum of Network LSA check sum installed in the TE Data base associated with this area.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.4.1.4

The OSPF-TE Interface Table describes the TE information 
associated with the interfaces.

futOspfTeIfEntry row .1.3.6.1.4.1.10876.101.1.72.5.1

The OSPF-TE Interface Entry describes TE information
associated with the interface

Indexes

futOspfTeIfIpAddress futOspfTeAddressLessIf

Column	Syntax	OID
futOspfTeIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.5.1.1
futOspfTeAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.72.5.1.2
futOspfTeIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	AreaID	.1.3.6.1.4.1.10876.101.1.72.5.1.3
futOspfTeIfType The OSPF/OSPF-TE interface type.	Enumeration Enumerated Values: 1 pointToPoint 2 multiaccess	.1.3.6.1.4.1.10876.101.1.72.5.1.4
futOspfTeIfMetric TE Metric associated with the link	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.5.1.5
futOspfTeIfMaxBw The Maximum Bandwidth specifies the maximum bandwidth that can be used on this link in this direction (From the router originating the LSA to its neighbor)	BandWidth	.1.3.6.1.4.1.10876.101.1.72.5.1.6
futOspfTeIfMaxReservBw The Maximum Reservable Bandwidth specifies the maximum bandwidth that may be reserved on this link in this direction	BandWidth	.1.3.6.1.4.1.10876.101.1.72.5.1.7
futOspfTeIfRsrcClassColor The Resource Class/Color specifies administrative group membership for this link, in terms of a bit mask (0-31)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.5.1.8
futOspfTeIfOperStat This gives the status of the interface. It would be in 'invalid' state if TE information not present. It would be in 'notInService' state if TE information is present, but at OSPF level interface is not created. It wo…	Enumeration Enumerated Values: 1 invalid 2 notInService 3 active	.1.3.6.1.4.1.10876.101.1.72.5.1.9
futOspfTeIfLinkId A 32-bit integer (represented as a type IpAd- dress) If Interface Type is PtoP this is neighbour router Id and if Interface type is multi-access than this is interface address of designated router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.5.1.10
futOspfTeIfRemoteIpAddr The remote IP address associated with the TE link ( numbered links). For an unnumbered link, the remote address is of type unknown and this object should be the zero length string.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.5.1.11
futOspfTeIfProtectionType This attribute specifies link protection type of the TE link. Description of the different protection types can be found in the 'Routing Extensions in Support of Generalized MPLS' document.	Enumeration Enumerated Values: 1 extraTraffic 2 unprotected 3 shared 4 dedicated1For1 5 dedicated1Plus1 6 enhanced	.1.3.6.1.4.1.10876.101.1.72.5.1.12
futOspfTeIfSrlg This gives list of SRLG values associated with this interface.	OctetString	.1.3.6.1.4.1.10876.101.1.72.5.1.13

This table specifies the Interface descriptors associated with the
Interface

futOspfTeIfDescriptorEntry row .1.3.6.1.4.1.10876.101.1.72.6.1

An entry in this table is for Interface descriptor.

Indexes

futOspfTeIfDescrIpAddress futOspfTeIfDescrAddressLessIf futOspfTeIfDescrId

Column	Syntax	OID
futOspfTeIfDescrIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.6.1.1
futOspfTeIfDescrAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.72.6.1.2
futOspfTeIfDescrId This object specifies the link descriptor identifier.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.1.72.6.1.3
futOspfTeIfDescrSwithingCap This attribute specifies the Switching Capability.	Enumeration Enumerated Values: 1 psc1 2 psc2 3 psc3 4 psc4 51 l2sc 100 tdm 150 lsc 200 fsc	.1.3.6.1.4.1.10876.101.1.72.6.1.4
futOspfTeIfDescrEncodingType This attribute specifies the TE link encoding type.	TeLinkEncodingType Type Values: 1 packet 2 ethernet 3 ansiEtsiPdh 5 sdhItuSonetAnsi 7 digitalWrapper 8 lambda 9 fiber 11 fiberChannel	.1.3.6.1.4.1.10876.101.1.72.6.1.5
futOspfTeIfDescrMinLSPBandwidth This attribute specifies the minimum reservable bandwidth on the TE link. This is derived from the union of the minimum reservable bandwidth of all the component links associated with the TE link that can be used to car…	thousand bpsBandWidth	.1.3.6.1.4.1.10876.101.1.72.6.1.6
futOspfTeIfDescrMTU This attribute specifies Interface MTU size	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.6.1.7
futOspfTeIfDescrIndication This attribute specifies whether the interface support standard or Arbitray SONET/SDH	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.72.6.1.8

This table specifies the link descriptors associated with the
TE links.

futOspfTeIfSwDescrMaxBwEntry row .1.3.6.1.4.1.10876.101.1.72.7.1

An entry in this table is created for every TE link descriptor.
An ifEntry in the ifTable must exist before a
futOspfTeIfDescriptorEntry using the same ifIndex is created.
ifType of ifEntry must be futOspfTeIf(200).
If …

Indexes

futOspfTeIfDescrIpAddress futOspfTeIfDescrAddressLessIf futOspfTeIfDescrId futOspfTeIfSwDescrMaxBwPriority

Column	Syntax	OID
futOspfTeIfSwDescrMaxBwPriority This value indiates the priority of the band width	TeLinkPriority Type Constraints: range: 0..7	.1.3.6.1.4.1.10876.101.1.72.7.1.1
futOspfTeIfSwDescrMaxLSPBandwidth This attribute specifies the minimum reservable bandwidth on the TE link. This is derived from the union of the minimum reservable bandwidth of all the component links associated with the TE link that can be used to car…	thousand bpsBandWidth	.1.3.6.1.4.1.10876.101.1.72.7.1.2

This table specifies the priority-based bandwidth table
for TE links.

futOspfTeIfBandwidthEntry row .1.3.6.1.4.1.10876.101.1.72.8.1

An entry in this table contains information about
the priority-based bandwidth of TE links. An ifEntry in the
ifTable must exist before a futOspfTeIfBandwidthEntry using the
same ifIndex is created. ifType of ifEntry mu…

Indexes

futOspfTeIfIpAddress futOspfTeAddressLessIf futOspfTeIfBandwidthPriority

Column	Syntax	OID
futOspfTeIfBandwidthPriority This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering Extensions to OSPF Version 2' document.	TeLinkPriority Type Constraints: range: 0..7	.1.3.6.1.4.1.10876.101.1.72.8.1.1
futOspfTeIfUnreservedBandwidth This attribute specifies the TE link unreserved bandwidth at priority p. It is the sum of the unreserved bandwidths at priority p of all component links associated with the TE link (excludes all links that are strictly …	thousand bpsBandWidth	.1.3.6.1.4.1.10876.101.1.72.8.1.2