SUPERMICRO-MPTUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
19

fsMITunlIfTable

table
.1.3.6.1.4.1.10876.101.2.39.1.1.1 · 1 row entry · 19 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMITunlIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MPTUNNEL-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MPTUNNEL-MIB::fsMITunlIfTable' 
The (conceptual) table containing virtual router specific
information on configured tunnels.
fsMITunlIfEntry row .1.3.6.1.4.1.10876.101.2.39.1.1.1.1
The (conceptual) table containing information on
configured tunnels. This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value. It can also be used for row creation.
Indexes
Column Syntax OID
fsMITunlIfAddressType
The type of address in the corresponding
fsMITunlIfLocalInetAddress and fsMITunlIfRemoteInetAddress
objects.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.1
fsMITunlIfLocalInetAddress
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.2
fsMITunlIfRemoteInetAddress
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link (e.g., if it is a 6to4
tunnel), the val…
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.3
fsMITunlIfEncapsMethod
The encapsulation method used by the tunnel.
FsMITunlType
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
15compat
16ipv6ip
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.4
fsMITunlIfConfigID
An identifier used to distinguish between multiple
tunnels of the same encapsulation method, with the
same endpoints. If the encapsulation protocol only
allows one tunnel per set of endpoint addresses (such
as for GRE …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.5
fsMITunlIfHopLimit
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.6
fsMITunlIfSecurity
The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. More specific security-related
informati…
Enumeration
Enumerated Values:
1none
2ipsec
3other
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.7
fsMITunlIfTOS
The method used to set the high 6 bits of the IPv4
TOS or IPv6 Traffic Class in the outer IP header. A
value of -1 indicates that the bits are copied from
the payload's header. A value of -2 indicates that a
traffic co…
Integer32r/w
Constraints:
range: -2-63
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.8
fsMITunlIfFlowLabel
The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
fsMITunlIfAddressType indicates the tunnel is over IPv6.
A value of -1 indicates that a traffic conditioner is
invoked and …
FsIPv6FlowLabelOrAnyr/w
Type Constraints:
range: -1..1048575
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.9
fsMITunlIfMTU
Configured MTU of the specific tunnel entry. If set as 0,
the outgoing Link MTU will be used.
Integer32
Constraints:
range: 0-0
range: 1280-1500
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.10
fsMITunlIfDirFlag
Flag defining whether the configured tunnel is
unidirectional or bi-directional.
Enumerationr/w
Enumerated Values:
1unidirectional
2bidirectional
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.11
fsMITunlIfDirection
Flag defining whether the uni-directional tunnel
configured is incoming or out going.
Enumerationr/w
Enumerated Values:
1incoming
2outgoing
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.12
fsMITunlIfEncaplmt
The limit on how many further levels of nesting a tunnel
packet is permitted to undergo - not counting the
encapsulation in which the option itself is contained.
Default value recommended is 4. If this option is not to
…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.13
fsMITunlIfEncapOption
Flag indicating if Encapsulation option needs to be added
or not in a tunnelled packet.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.14
fsMITunlIfIndex
If the value of fsMITunlIfStatus for this row
is active, then this object contains the value of
ifIndex corresponding to the tunnel interface. A
value of 0 is not legal in the active state, and means
that the interface…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.15
fsMITunlIfAlias
If the value of fsMITunlIfStatus for this row
is active, then this object contains the value of
ifAlias corresponding to the tunnel interface.
The value of fsMITunlIfIndex is assigned based on
the corresponding fsMITun…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.16
fsMITunlIfCksumFlag
Flag indicating if checksum needs to be set in GRE header
for GRE encapsulation type
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.17
fsMITunlIfPmtuFlag
Flag indicating if path-mtu-discovery needs to be enabled on the
tunnel interface. When enabled, path-mtu-discovery is done to set
the MTU of the tunnel interface. When disabled, the outgoing link
MTU will be used
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.18
fsMITunlIfStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.

To create a row in this table for an encapsulation
method which does not support multiple parallel
tunn…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.2.39.1.1.1.1.19