SUPERMICRO-MPLS-TE-MIB Table View

The fsMplsTunnelTable is extension of mplsTunnelTable.

fsMplsTunnelEntry row .1.3.6.1.4.1.10876.101.1.13.12.1.2.1

The fsMplsTunnelTable is extension of mplsTunnelTable.

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsTunnelType This object allows the administrator to the tunnel type of a MPLS tunnel. The value of bit 0 (mpls) if set indicates that this is a normal MPLS Tunnel. The value of bit 1 (mplstp) if set in…	Bitsr/w Enumerated Values: 0 mpls 1 mplstp 2 gmpls 3 hlsp 4 p2mp	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.1
fsMplsTunnelLSRIdMapInfo This object indicates whether the Ingress and Egress LSR ID objects of the tunnel entry to be treated as LSR IDs or should be treated as an index to the fsMplsTpNodeMapTable. The value of bit 0 (ingressI…	Bitsr/w Enumerated Values: 0 ingressId 1 egressId	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.2
fsMplsTunnelMode This object allows the administrator to configure the mode of tunnel. The value unidirectional (0) indicates that the direction of the tunnel is only single direction. The value coroutedB…	Enumerationr/w Enumerated Values: 0 unidirectional 1 coroutedBidirectional 2 associatedBidirectional	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.3
fsMplsTunnelProactiveSessIndex This object indicates the proactive session index for this tunnel. When a proactive session to monitor this tunnel is established, the application updates this object with the session index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.4
fsMplsTunnelMBBStatus The administrative Make-Before-Break status for Tunnel. The value 'enabled' (1) indicates that Tunnel supports Make-Before-Break capablity.The value 'disabled' (2) indicates that Tunnel does not support Make-Before-B…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.5
fsMplsTunnelDisJointType This object indicates the disjoint type of the protection tunnel with respect to the working tunnel. It is applicable only for protection tunnel.	Enumerationr/w Enumerated Values: 1 srlgDisjoint 2 nodeDisjoint 3 linkDisjoint	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.6
fsMplsTunnelAttPointer This variable points to a row in the fsTunnelAttributeTable . This table identifies the attribute of LSP. A value of zeroDotZero indicates that no Attribute has been associated with this tunnel yet.	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.7
fsMplsTunnelEndToEndProtection This bitmask indicates the level of end to end protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfields: unprotected This f…	Bitsr/w Enumerated Values: 0 unprotected 1 fullReroute 2 rerouteWithoutExtraTraffic 3 dedicatedOneToOne 4 dedicatedUniOnePlusOne 5 dedicatedBiOnePlusOne	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.8
fsMplsTunnelPrConfigOperType This object is used to indicate the operation type/mode of the tunnel. If the value is set to 'revertive(1)', the normal traffic shall be returned to the working LSP has recoverd from the failure. (i.e) after the est…	Enumerationr/w Enumerated Values: 1 revertive 2 nonRevertive	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.9
fsMplsTunnelSrlgType This object indicates shared risk link group value for this tunnel.	Enumerationr/w Enumerated Values: 1 includeAny 2 includeAll 3 excludeAny	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.10
fsMplsTunnelIfIndex If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a vali…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.11
fsMplsTunnelInitReOptimize This object is used to indicate the Reoptimization of the tunnel. When this object is set true then user has initiated reoptimization. Default value of this object is FALSE. A tunnel is defined as being reoptimized when…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.12
fsMplsTunnelIsProtectingLsp This object specifies whether this LSP is working LSP or protection LSP. If this object is set to true, it means the LSP is protection LSP. If this object is set to false, it means the LSP is working LSP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.13
fsMplsLspTunnelMapIndex This object is used to indicate the tunnel index of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP and E2E LSP occurs	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.14
fsMplsLspTunnelMapInstance This object is used to indicate the tunnel instance of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP and E2E LSP occurs	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.15
fsMplsLspTunnelMapIngressLSRId This object is used to indicate the identity of the Ingress LSR of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP and E2E LSP occurs	MPLS-TC-STD-MIBMplsExtendedTunnelId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.16
fsMplsLspTunnelMapEgressLSRId This object is used to indicate the identity of the Egress LSR of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP and E2E LSP occurs	MPLS-TC-STD-MIBMplsExtendedTunnelId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.17
fsMplsTunnelSynchronizationStatus Indicates the Synchronization status of the tunnel upon RSVP-TE Graceful Restart. This object is applicable only for RSVP-TE signalled tunnels. Following values are possible. 0. Not synchronized. 1. Downstream Synchroni…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.18
fsMplsTunnelOutPathMsgId Denotes the message id generated for the PATH message which is sent from the node. This is used for recovering the state when the node receives SRefresh RecoveryPath message from the helper. This is applicable only …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.19

This table represents MPLS-TP specific extensions to
mplsTunnelTable.
          
As per MPLS-TP Identifiers draft,  LSP_ID is 
          
Src-Global_Node_ID::Src-Tunnel_Num::Dst-Global_Node_ID::
Dst-Tunnel_Num::LSP_Num 
          
mplsTunnelTable is reused for forming the LSP_ID as follows,
          
Source Tunnel_Num is mapped with mplsTunnelIndex,
Source node identifier is mapped with mplsTunnelIngressLSRId,
Destination node identifier is mapped with mplsTunnelEgressLSRId
LSP_Num is mapped with mplsTunnelInstance.
          
Source Global identifier and Destination Global identifier are
maintained in the fsMplsTpNodeMapTable and 
          
fsMplsTpNodeMapLocalNum is used to create an entry in
mplsTunnelTable.

fsMplsTpTunnelEntry row .1.3.6.1.4.1.10876.101.1.13.12.1.3.1

An entry in this table represents MPLS-TP
specific tunnel configurations.

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsTpTunnelDestTunnelIndex This object allows the administrator to configure the tunnel index of the reverse tunnel. For co-routed bidirectional tunnel, this object will have the value same as the object mplsTunnelIndex. …	MPLS-TC-STD-MIBMplsTunnelIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.1.13.12.1.3.1.1
fsMplsTpTunnelDestTunnelLspNum This object allows the administrator to configure the tunnel lsp number of the reverse tunnel for a associated bidirectional tunnel. This object helps to associate a forward tunnel with the reverse tunnel…	MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.3.1.2

The fsTunnelAttributeTable allows allows configuration 
of LSP attribute parameters.

fsTunnelAttributeEntry row .1.3.6.1.4.1.10876.101.1.13.12.1.5.1

An entry in this table represents attribute parameters
to be associated with a LSP.

Indexes

fsTunnelAttributeIndex

Column	Syntax	OID
fsTunnelAttributeIndex Unique value that identifies a row in this table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.1
fsTunnelAttributeName The canonical name assigned to the LSP attribute entry. This uniquely identifies the attribute entry.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.2
fsTunnelAttributeSetupPrio This object indicates the setup priority attribute. There is no default value for this object. If this object is not configured, then LSP takes this attribute from mplsTunnelTable.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.3
fsTunnelAttributeHoldingPrio This object indicates the holding priority attribute. There is no default value for this object. If this object is not configured, then LSP takes this attribute from mplsTunnelTable.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.4
fsTunnelAttributeIncludeAnyAffinity A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common. Valid range is Integer(0..4294967295). There is no default value for thi…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.5
fsTunnelAttributeIncludeAllAffinity A link satisfies the include-all constraint if and only if the link contains all of the administrative groups specified in the constraint. Valid range is Integer(0..4294967295). There is no default value for this object…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.6
fsTunnelAttributeExcludeAnyAffinity A link satisfies the exclude-any constraint if and only if the link contains none of the administrative groups specified in the constraint. Valid range is Integer(0..4294967295). There is no default value for this objec…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.7
fsTunnelAttributeSessionAttributes This bit mask indicates optional session values for this LSP. The following describes these bit fields: fastReroute This flag indicates that the any lsp hop may choose to reroute this LSP.This flag permit…	Bitsr/w Enumerated Values: 0 fastReroute 1 mergingPermitted 2 isPersistent 3 isPinned 4 recordRoute	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.8
fsTunnelAttributeBandwidth This object indicates the bandwidth attribute. There is no default value for this object. If this object is not configured, then LSP takes this attribute from mplsTunnelTable.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.9
fsTunnelAttributeTeClassType This object represents the Class-Type attribute. There is no default value for this object. If this object is not configured, then LSP takes this attribute from the tunnel configuration.	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.10
fsTunnelAttributeSrlgType This object represents Shared Risk Link Group Value attribute. There is no default value for this object. If this object is not configured, then LSP takes this attribute from the tunnel configuration.	Enumerationr/w Enumerated Values: 1 includeAny 2 includeAll 3 excludeAny	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.11
fsTunnelAttributeRowStatus This object is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.12
fsTunnelAttributeMask This object is used to find the number of Attribute parameters considered while setting up the path. If no bits are set, it means no Attribute parameters are configured	Bitsr/w Enumerated Values: 0 setupPriority 1 holdingPriority 2 sessionAttribute 3 includeAnyAffinity 4 includeAllAffinity 5 excludeAllAffinity 6 bandwidth 7 classType 8 srlg	.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.13

The fsMplsTunnelSrlgTable allows the administrator to configure
Shared Risk Link Group Values for tunnels.

fsMplsTunnelSrlgEntry row .1.3.6.1.4.1.10876.101.1.13.12.1.6.1

An entry in this table represents Shared Risk Link Group Values values
associated with a Tunnel.

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId fsMplsTunnelSrlgNo

Column	Syntax	OID
fsMplsTunnelSrlgNo This object identifies an SRLG constraint associated with Tunnel. An SRLG is identified with a 32-bit number that is unique within an IGP domain. Zero is a valid SRLG number.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.6.1.1
fsMplsTunnelSrlgRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.12.1.6.1.2

The fsTunnelAttributeSrlgTable allows the administrator to configure
Shared Risk Link Group Values for each Attribute List to be 
associated with the Tunnel.

fsTunnelAttributeSrlgEntry row .1.3.6.1.4.1.10876.101.1.13.12.1.7.1

An entry in this table represents Shared Risk Link Group Values
associated with a attribute list.

Indexes

fsTunnelAttributeIndex fsTunnelAttributeSrlgNo

Column	Syntax	OID
fsTunnelAttributeSrlgNo This object identifies an SRLG constraint associated with a Attribute list. An SRLG is identified with a 32-bit number that is unique within an IGP domain. Zero is a valid SRLG number.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.1.13.12.1.7.1.1
fsTunnelAttributeSrlgRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.12.1.7.1.2

The fsMplsTunnelHopTable extends the mplsTunnelHopTable of 
MPLS-TE-STD-MIB. This table has the additional Constraint that needs
to be considered when calculating the path to reach the 
destination.

fsMplsTunnelHopEntry row .1.3.6.1.4.1.10876.101.1.13.12.1.8.1

An entry in this table represents additions to a tunnel hop defined
in mplsTunnelHopEntry. This entry is valid only at the Ingress of the
tunnel and this table is configured only by the network Administrator.

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsTunnelHopIncludeAny If this value is set to true, then this indicates that this hop is configured as an include any node. If a hop in the table is configured as include any, then it overrides the configuration of mplsTunnelHopInclude ob…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.12.1.8.1.1