SUPERMICRO-MPLS-MIB Table View

This table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switch Router (LSR).

fsMplsLdpEntityEntry row .1.3.6.1.4.1.10876.101.1.13.1.1.7.1

An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsLdpEntityPHPRequestMethod For any given LDP session, the method of requesting PHP support must be specified, if PHP(penultimate Hop Popping) is desired, PHP request can be advertised either by implicit null labels or explicit null labels. NOTE…	Enumerationr/w Enumerated Values: 0 explicit 1 disabled 3 implicit	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.1
fsMplsLdpEntityTransAddrTlvEnable When this object is set to true(1), Transport Address TLV is sent in the LDP Hello Message. When this object is set to false(2), Transport Address TLV is not set in the LDP Hello Message.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.2
fsMplsLdpEntityTransportAddress The IP Address stored in this object is carried in the Transport Address TLV of the LDP Hello Message. The IP Address configured in this object should be a loopback address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.3
fsMplsLdpEntityLdpOverRsvpEnable When this object is set to true(1), LDP LSP Tunneling over RSVP is enabled. This object is applicable only for the Targeted Session i.e., this object can be set to true(1) only if the object mplsLdpEn…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.4
fsMplsLdpEntityOutTunnelIndex This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). Outgoing Tunnel Index is stored in this object.	MPLS-TC-STD-MIBMplsTunnelIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.5
fsMplsLdpEntityOutTunnelInstance This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). Outgoing Tunnel Instance is stored in this object.	MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.6
fsMplsLdpEntityOutTunnelIngressLSRId This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). IP Address of Ingress LSR of Outgoing Tunnel is stored in this object.	MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.7
fsMplsLdpEntityOutTunnelEgressLSRId This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). IP Address of Egress LSR of Outgoing Tunnel is stored in this object.	MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.8
fsMplsLdpEntityInTunnelIndex This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). Incoming Tunnel Index is stored in this object.	MPLS-TC-STD-MIBMplsTunnelIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.9
fsMplsLdpEntityInTunnelInstance This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). Incoming Tunnel Instance is stored in this object.	MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.10
fsMplsLdpEntityInTunnelIngressLSRId This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). IP Address of Ingress LSR of Tunnel is stored in this object.	MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.11
fsMplsLdpEntityInTunnelEgressLSRId This object is applicable only if LDP LSP Tunneling over RSVP is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to true(1). IP Address of Egress LSR of Incoming Tunnel is stored in this object.	MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.12

The fsMplsCrlspTnlTable uses fsMplsCrlspTnlIndexn.
fsMplsCrlspTnlIndex points to the primary index of 
the mplsTunnelTable (See <draft-ietf-mpls-te-mib-06.txt>).

fsMplsCrlspTnlEntry row .1.3.6.1.4.1.10876.101.1.13.1.4.3.1

An entry in this table represents fsMplsCrlspTnlIndex.
An entry can be created by a network administrator
or by an SNMP agent as instructed by CRLDP.

Indexes

fsMplsCrlspTnlIndex

Column	Syntax	OID
fsMplsCrlspTnlIndex This index points to the primary index of the mplsTunnelTable of <draft-ietf-mpls-te-mib-06.txt>.	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.1.13.1.4.3.1.1
fsMplsCrlspTnlRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.4.3.1.2
fsMplsCrlspTnlStorageType This variable indicates the storage type for this object.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.10876.101.1.13.1.4.3.1.3

This table is an extension to pw Table for configuring the mode
of Pseudowire

fsMplsL2VpnPwEntry row .1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1

A row in this table augments a row in pwTable.
This entry specifies the mode of PW.

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsL2VpnPwMode This field indicates the mode of pseudowire.	Enumerationr/w Enumerated Values: 1 vpws 2 vpls 3 ipls	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.1
fsMplsL2VpnVplsIndex Valid only if fsMplsL2VpnPwMode is vpls(2). Contains the Index of fsMplsVplsConfigTable (fsMplsVplsInstanceIndex)	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.2
fsMplsL2VpnPwLocalCapabAdvert This object is set to indicate the capabilities of the pseudowire.	IANAPwCapabilitiesr/w Type Values: 0 pwStatusIndication 1 pwVCCV	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.3
fsMplsL2VpnPwLocalCCSelected Indicates the type of Control channel selected from the matching types between fsMplsL2VpnPwLocalCCAdvert and fsMplsL2VpnPwRemoteCCAdvert based on the following precedency rule 1. Type 1: PWE3 Control W…	PwCcTypesCapabilities Type Values: 0 ach 1 routerAlertLabel 2 ttlExpiry	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.4
fsMplsL2VpnPwLocalCVSelected Indicates the selected connection verification type from the matching types between fsMplsL2VpnPwLocalCVAdvert and fsMplsL2VpnPwRemoteCVAdvert.	PwCvTypesCapabilities Type Values: 0 icmpping 1 lspping 2 bfdIpUdpFaultDetect 3 bfdIpUdpFaultDetectAndStatusNotif 4 bfdAchFaultDetect 5 bfdAchFaultDetectAndStatusNotif	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.5
fsMplsL2VpnPwLocalCCAdvert Indicates the type of control channel types advertised by this node to peer. PW Local control channel can have one or more types available in the fsMplsLocalCCTypesCapabilities object. If this object is not configured…	PwCcTypesCapabilitiesr/w Type Values: 0 ach 1 routerAlertLabel 2 ttlExpiry	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.6
fsMplsL2VpnPwLocalCVAdvert Indicates the type of connection verification types advertised by this node to the peer. PW Local CV types can have one or more types available in the fsMplsLocalCVTypesCapabilities object. When this object is not conf…	PwCvTypesCapabilitiesr/w Type Values: 0 icmpping 1 lspping 2 bfdIpUdpFaultDetect 3 bfdIpUdpFaultDetectAndStatusNotif 4 bfdAchFaultDetect 5 bfdAchFaultDetectAndStatusNotif	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.7
fsMplsL2VpnPwRemoteCCAdvert This field indicates the type of control channel advertised by the peer to this node. This object is configurable only for manual mode of pseudowire (i.e., when pseudowire signaling is not used). This object acts as re…	PwCcTypesCapabilitiesr/w Type Values: 0 ach 1 routerAlertLabel 2 ttlExpiry	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.8
fsMplsL2VpnPwRemoteCVAdvert This field indicates the type of connection verification advertised by the peer to this node. This object is configurable only for manual mode of pseudowires (i.e., when pseudowire signaling is not used). This object…	PwCvTypesCapabilitiesr/w Type Values: 0 icmpping 1 lspping 2 bfdIpUdpFaultDetect 3 bfdIpUdpFaultDetectAndStatusNotif 4 bfdAchFaultDetect 5 bfdAchFaultDetectAndStatusNotif	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.9
fsMplsL2VpnPwOamEnabledeprecated This variable indicates the OAM status of the pseudowire. The value 'true' denotes that OAM is enabled for this pseudowire and 'false' denotes that OAM is disabled for this pseudowire. The value of this object may be…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.10
fsMplsL2VpnPwGenAGIType This variable indicates the AGI type if generalized FEC (129) is used for PW signaling or configuration. It SHOULD return the value of zero otherwise.	PwGenIdTyper/w Type Constraints: range: 0..254	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.11
fsMplsL2VpnPwGenLocalAIIType This object is the type of the local forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC (129) is used for PW signaling or configuration. If Source-AC-Id and Destinat…	PwGenIdTyper/w Type Constraints: range: 0..254	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.12
fsMplsL2VpnPwGenRemoteAIIType This object is the type of the remote forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC (129) is used for PW signaling or configuration. If Source-AC-Id and Destina…	PwGenIdTyper/w Type Constraints: range: 0..254	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.13
fsMplsL2VpnProactiveOamSsnIndex Indicates the proactive session index for this Pseudowire. When a proactive session for this Pseudowire is established, the application has to update this object with the session index. The value '0' indicates that pro…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.14
fsMplsL2VpnPwAIIFormat Indicates whether the configured Attachment identifier is an IP address or a string. The value of bit 0 (saiiIp) if set indicates SAII input is an IP address. The value of bit 0 (saiiIp) i…	Bitsr/w Enumerated Values: 0 saiiIp 1 taiiIp	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.15
fsMplsL2VpnIsStaticPw This MIB object indicates whether the pseudowire is created via administrative control or dynamically. If value is 'true', then it denotes that PW is created by the user/administrator. Otherwise,it is a signalled pseu…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.16
fsMplsL2VpnNextFreePwEnetPwInstance This MIB object contains the next free running ethernet pseudowire Instance associated with the pseudowire Index.	PW-TC-STD-MIBPwIndexType Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.17
fsMplsL2VpnPwSynchronizationStatus Indicates the Synchronization status of the Pseudowire upon LDP Graceful Restart. Only Four different values are possible. 0. Fully Synchronized 1. Local Synchronized. 2. Remote Synchronized 3. Not Synchronized. …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.18

This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).

fsMplsVplsConfigEntry row .1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1

A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
fsMplsVplsInstanceIndex, which uniquely identifies a single VPLS.

A row is created by the opera…

Indexes

fsMplsVplsInstanceIndex

Column	Syntax	OID
fsMplsVplsInstanceIndex Unique index for the conceptual row identifying a VPLS service.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.1
fsMplsVplsVsi The Layer2 Bridge Instance Identifier (or) Virtual Switch Identifier. An Entry with this object as the index should exist in the fsVcmConfigTable of fsvcm.mib	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.2
fsMplsVplsVpnId This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. The First 3 Octects consists of OUI(Organizationally Unique Identifier).Rest 4 Octects uniquely identifies the VPN within the context of t…	OctetStringr/w Constraints: range: 0-0 range: 7-7	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.3
fsMplsVplsName A textual name of the VPLS Service. If there is no local name or this object is otherwise not applicable, then this object MUST contain a zero-length octet string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.4
fsMplsVplsDescr A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length octet string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.5
fsMplsVplsFdbHighWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the fsMplsVplsFdbFullAlarm notification will be sent.	percentageUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.6
fsMplsVplsFdbLowWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the fsMplsVplsFdbClearedAlarm notification will be sent.	percentageUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.7
fsMplsVplsRowStatus For creating, modifying, and deleting this row. For making a row available for use [Active State], a valid VSI and VPN Id is Mandatory.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.8
fsMplsVplsL2MapFdbId For mapping VplsInstance to a L2 FDB Id (Forwarding database Identifier).	Integer32r/w Constraints: range: 4096-65535	.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.9

This table reports and configure the current inbound MPLS   
tunnels (i.e. Egress Tunnels). This table is to be used only
in case of pwMplsType TE. It also reports the current 
incoming tunnel and LSP which carries the PW traffic from the PSN.

fsPwMplsInboundEntry row .1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1

A row in this table configures the incoming tunnel used for
carrying the PW traffic from the PSN.

An entry in this table augments the pwMplsEntry, and is
created automatically when the corresponding …

Indexes

No indexes recorded

Column	Syntax	OID
fsPwMplsInboundTunnelIndex This object is part of set of indexes for inbound tunnel. The operator set this object to represent the desired tunnel tail-end coming from the peer carrying the PW traffic.	MPLS-TC-STD-MIBMplsTunnelIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.1
fsPwMplsInboundTunnelInstance This object indicates the actual tunnel instance that is currently active and carrying the PW traffic - it should return the value of zero until if the information from the MPLS-TE application is not yet known.	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.2
fsPwMplsInboundTunnelEgressLSR This object is part of set of indexes for inbound tunnel. The operator set this object to represent the desired tunnel tail-end coming from the peer carrying the PW traffic.	MPLS-TC-STD-MIBMplsLsrIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.3
fsPwMplsInboundTunnelIngressLSR This object is part of set of indexes for inbound tunnel. The operator set this object to represent the desired tunnel tail-end coming from the peer carrying the PW traffic It is typically equal to pwPeerAddr.	MPLS-TC-STD-MIBMplsLsrIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.4

This table is used for the Port related configuration on MPLS.
All the objects in this table are applicable for UNI ports only.

fsMplsPortEntry row .1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1

Each entry in this table specifies the MPLS related
port configurations. This table is indexed by ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fsMplsPortBundleStatus A Truth value indicating that Bundling is enabled/disabled on this Port.if Bundling is enabled,Multiple AC on the UNI port can map to the same VPLS.If Bundling is disabled, multiple AC on the UNI port cannot be mappe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.1
fsMplsPortMultiplexStatus A Truth value indicating that Multiplexing is enabled/disabled on this port.if Multiplexing is enabled,UNI port can be mapped to multiple VPLS instances/VPNs.If Multiplexing is disabled, UNI port cannot be mapped to …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.2
fsMplsPortAllToOneBundleStatus A Truth value indicating that AllToOneBundling is enabled/disabled on this port.If AllToOneBundling is enabled,All ACs on a UNI port are mapped to single VPLS.if AllToOneBundling is disabled,bundling of ACs on a UNI p…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.3
fsMplsPortRowStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.4

The fsMplsTunnelRSVPResTable allows a manager to
specify which resources are desired for an MPLS
tunnel. This table also allows several tunnels
to point to a single entry in this table,
implying that these tunnels should share
resources.

fsMplsTunnelRSVPResEntry row .1.3.6.1.4.1.10876.101.1.13.1.6.1.1

An entry in this table represents a set of
resources for an MPLS RSVP based tunnel. An entry in this table
is augemented by an entry in mplsTunnelResourceTable.

The values of the MIB elements present
in a g…

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsTunnelRSVPResTokenBucketRate The maximum incoming rate in kilobits/second. Note that setting fsMplsTunnelInMaxRate, fsMplsTunnelInMeanRate, and fsMplsTunnelInMaxBurstSize to 0 indicates best- effort treatment. This object is copied to an instance …	kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.1
fsMplsTunnelRSVPResTokenBucketSize The maximum incoming rate in kilobits/second. Note that setting fsMplsTunnelInMaxRate, fsMplsTunnelInMeanRate, and fsMplsTunnelInMaxBurstSize to 0 indicates best- effort treatment. This object is copied to an instance …	kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.2
fsMplsTunnelRSVPResPeakDataRate The maximum incoming rate in kilobits/second. Note that setting fsMplsTunnelInMaxRate, fsMplsTunnelInMeanRate, and fsMplsTunnelInMaxBurstSize to 0 indicates best- effort treatment. This object is copied to an instance …	kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.3
fsMplsTunnelRSVPResMinimumPolicedUnit The maximum incoming rate in bits/second. Note that setting fsMplsTunnelInMaxRate, fsMplsTunnelInMeanRate, and fsMplsTunnelInMaxBurstSize to 0 indicates best- effort treatment. This object is copied to an instance of m…	INTEGRATED-SERVICES-MIBMessageSizer/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.4
fsMplsTunnelRSVPResMaximumPacketSize The maximum incoming rate in bits/second. Note that setting fsMplsTunnelInMaxRate, fsMplsTunnelInMeanRate, and fsMplsTunnelInMaxBurstSize to 0 indicates best- effort treatment. This object is copied to an instance of m…	INTEGRATED-SERVICES-MIBMessageSizer/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.5

The fsMplsTunnelCRLDPResTable allows a manager to
specify which CR-LDP-specific resources are desired
for an MPLS tunnel if that tunnel is signaled using
CR-LDP. Note that these attributes are in addition
to those specified in mplsTunnelCRLDPResTable. This
table augments the mplsTunnelCRLDPResTable.

fsMplsTunnelCRLDPResEntry row .1.3.6.1.4.1.10876.101.1.13.1.6.2.1

An entry in this table represents a set of
resources for an MPLS tunnel established using CRLDP
(mplsTunnelSignallingProto equal to crldp (3)). An
entry can be created by a network administrator or
by an SNMP agent as …

Indexes

MPLS-TE-STD-MIBmplsTunnelResourceIndex

Column	Syntax	OID
fsMplsTunnelCRLDPResPeakDataRate The peak rate - the maximum rate at which traffic will be sent on the CRLSP.	kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.1
fsMplsTunnelCRLDPResCommittedDataRate The committed rate - the committed rate at which traffic will be sent on the CRLSP.	kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.2
fsMplsTunnelCRLDPResPeakBurstSize The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.	bytesMPLS-TC-STD-MIBMplsBurstSizer/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.3
fsMplsTunnelCRLDPResCommittedBurstSize The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP.	bytesMPLS-TC-STD-MIBMplsBurstSizer/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.4
fsMplsTunnelCRLDPResExcessBurstSize The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.	bytesMPLS-TC-STD-MIBMplsBurstSizer/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.5

ELSP's EXP to PHB Mapping Table

fsMplsDiffServElspMapEntry row .1.3.6.1.4.1.10876.101.1.13.1.7.1.1

ELSP Mapping Table Entry

Indexes

fsMplsDiffServElspMapIndex fsMplsDiffServElspMapExpIndex

Column	Syntax	OID
fsMplsDiffServElspMapIndex This object specifies the Index of the ELSP Map Element Value of this object should be less then fsMplsDiffServElspMapEntries	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.1
fsMplsDiffServElspMapExpIndex This object specifies the Exp value of a particular EXP to PHB mapping	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.2
fsMplsDiffServElspMapPhbDscp This object specifies the PHB Dscp value for a given EXP value in a given EXP to PHB mapping.	Enumerationr/w Enumerated Values: 0 df 8 cs1 10 af11 12 af12 14 af13 16 cs2 18 af21 20 af22 22 af23 24 cs3 26 af31 28 af32 30 af33 32 cs4 34 af41 36 af42 38 af43 40 cs5 46 ef 48 cs6 56 cs7	.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.3
fsMplsDiffServElspMapStatus Specifies whether this given EXP to PHB mapping is active/notInService. fsMplsDiffServElspPreConfExpPhbMapIndex should be set to -1 to unmap a entry in preconfigured case.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.4

Table containing the DiffServ Params for a given NHLFE

fsMplsDiffServParamsEntry row .1.3.6.1.4.1.10876.101.1.13.1.7.2.1

DiffServ Params Table Entry

Indexes

fsMplsDiffServParamsIndex

Column	Syntax	OID
fsMplsDiffServParamsIndex This object specifies the Index of the DiffServ Params Element Value of this index should be less then fsMplsDiffServParamsEntries	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.1
fsMplsDiffServParamsServiceType This object specifies the type of service supported on this lsp	Enumerationr/w Enumerated Values: 0 genlsp 1 diffservelsp 2 diffservllsp 3 intserv	.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.2
fsMplsDiffServParamsLlspPscDscp This object specifies the PSC Dscp value if the DiffServ Params corresponds to an llsp. This should be configured only if fsMplsDiffServParamsServiceType is diffservllsp	Enumerationr/w Enumerated Values: 0 df 8 cs1 10 af1 16 cs2 18 af2 24 cs3 26 af3 32 cs4 34 af4 40 cs5 46 ef 48 cs6 56 cs7	.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.3
fsMplsDiffServParamsElspType This object specifies the type of ELSP if the DiffServ Params corresponds to an elsp. This should be configured only if fsMplsDiffServParamsServiceType is diffservelsp	Enumerationr/w Enumerated Values: 0 preconf 1 sig	.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.4
fsMplsDiffServParamsElspSigExpPhbMapIndex This object specifies the index to the Elsp Map Table which gives the Signaled EXP to PHB mapping if the DiffServ Params corresponds to a signaled Elsp. This should be configured only if fsMplsDiffServParamsServiceT…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.5
fsMplsDiffServParamsStatus Specifies whether this given DiffServ Params entry is active/notInService	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.6

The fsMplsDiffServTable allows a manager to
specify the diffServ Service-Type and the corresponding 
attributes for the Service-Type as desired for the tunnel 
when the mpls is diffServ aware.

fsMplsDiffServEntry row .1.3.6.1.4.1.10876.101.1.13.1.7.3.1

An entry in this table represents the diffServ
Service-Type and diffServ related parameters
for the tunnel.

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId

Column	Syntax	OID
fsMplsDiffServClassType Represents the Class-Type associated with the tunnel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.1
fsMplsDiffServServiceType Represents the Service-Type associated with the tunnel. By default, it is NonDiffServ.	Enumerationr/w Enumerated Values: 0 nonDiffServLSP 1 diffServElsp 2 diffServLlsp 3 intServLSP	.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.2
fsMplsDiffServLlspPsc If the fsMplsDiffServServiceType is set to 'DiffServLlsp', then this value identifies an entry in the fsMplsDiffServLlspTable that gives the PSC associated with the diffServ aware tunnel. Otherwise, this variable s…	Enumerationr/w Enumerated Values: 0 df 8 cs1 10 af1 16 cs2 18 af2 24 cs3 26 af3 32 cs4 34 af4 40 cs5 46 ef 48 cs6 56 cs7 62 ef1	.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.3
fsMplsDiffServElspType Represents whether the Elsp is signaled or preconfigured.	Enumerationr/w Enumerated Values: 0 preconfigured 1 signaled	.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.4
fsMplsDiffServElspListIndex This value corresponds to the entry in the fsMplsDiffServElspInfoTable , which gives the information about the PHBs and the resource requirement for the PSC of the PHB.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.5
fsMplsDiffServRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.6
fsMplsDiffServStorageType This variable indicates the storage type for this object.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.7

The fsMplsDiffServElspInfoTable allows a manager to
specify  the information about the PHBs and the resource 
requirement for the PSC of the PHB for the diffServ Elsp   
Tunnel.

fsMplsDiffServElspInfoEntry row .1.3.6.1.4.1.10876.101.1.13.1.7.4.1

An entry in this table represents the
information about the PHBs and the resource
requirement for the PSC of the PHB.

Indexes

fsMplsDiffServElspInfoListIndex fsMplsDiffServElspInfoIndex

Column	Syntax	OID
fsMplsDiffServElspInfoListIndex Uniquely identifies the list of the entries in the table. This value is referred in fsMmplsDiffServEntry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.1
fsMplsDiffServElspInfoIndex Uniquely identifies each entry in the table.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.2
fsMplsDiffServElspInfoPHB Represents the DSCP value of the PHB for this entry.	Enumerationr/w Enumerated Values: 0 df 8 cs1 10 af11 12 af12 14 af13 16 cs2 18 af21 20 af22 22 af23 24 cs3 26 af31 28 af32 30 af33 32 cs4 34 af41 36 af42 38 af43 40 cs5 46 ef 48 cs6 56 cs7 62 ef1	.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.3
fsMplsDiffServElspInfoResourcePointer This variable represents a pointer to the traffic parameter specification for this PSC. This value may point at an entry in the mplsTunnelResourceEntry to indicate which mplsTunnelResourceEntry is to be assigned to this…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.4
fsMplsDiffServElspInfoRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.5
fsMplsDiffServElspInfoStorageType This variable indicates the storage type for this object.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.6

This table is used to configure different class types and 
bandwidth percentages for the particular class type.

fsMplsDsTeClassTypeEntry row .1.3.6.1.4.1.10876.101.1.13.1.8.2.1

Class Type Table Entry

Indexes

fsMplsDsTeClassTypeIndex

Column	Syntax	OID
fsMplsDsTeClassTypeIndex This object uniquely identifies a row in this table.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.1
fsMplsDsTeClassTypeDescription This object is used to provide description for the Class Type.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.2
fsMplsDsTeClassTypeRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except fsMplsDsTeClassTypeRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.3
fsMplsDsTeClassTypeBwPercentage This object specifies the percentage of total bandwidth of a TE link allocated to this Class Type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.4

This table maps the Class Type to Traffic Classes. One 
Traffic Class can belong to only one Class Type.

fsMplsDsTeClassTypeToTcMapEntry row .1.3.6.1.4.1.10876.101.1.13.1.8.3.1

Class Type to Traffic Class Mapping Table Entry.

Indexes

fsMplsDsTeClassTypeIndex fsMplsDsTeTcIndex

Column	Syntax	OID
fsMplsDsTeTcIndex This object is a secondary index to this table. It specifies the traffic class index.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.1
fsMplsDsTeTcType This object specifies the traffic class value associated with this Class Type. Traffic Class Mapping Entry.	Enumerationr/w Enumerated Values: 0 df 8 cs1 10 af1 16 cs2 18 af2 24 cs3 26 af3 32 cs4 34 af4 40 cs5 46 ef 48 cs6 56 cs7 62 ef1	.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.2
fsMplsDsTeTcDescription This object describes the traffic class mapping entry.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.3
fsMplsDsTeTcMapRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except fsMplsDsTeTcMapRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.4

This table maps the Class Type to Priority. Each row in this 
table corresponds to a Diffserv TE Class. Each DS-TE class
is defined by associating Class Type with priority.

fsMplsDsTeTeClassEntry row .1.3.6.1.4.1.10876.101.1.13.1.8.4.1

TE Class Table Entry

Indexes

fsMplsDsTeClassTypeIndex fsMplsDsTeTeClassPriority

Column	Syntax	OID
fsMplsDsTeTeClassPriority This object specifies the preemption priority associated with a Class-Type to form a TE-Class. This priority will be used both as set-up and holding priority	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.1
fsMplsDsTeTeClassDesc This object describes the Class Type mapping with Priority.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.2
fsMplsDsTeTeClassNumber This object specifies the TE-Class Number. This is unique throughout the system.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.3
fsMplsDsTeTeClassRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except fsMplsDsTeTeClassRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.4

Information about LDP peers known by Entities in
the fsmplsLdpEntityTable.  The information in this table
is based on information from the Entity-Peer interaction
during session initialization but is not appropriate
for the mplsLdpSessionTable, because objects in this
table may or may not be used in session establishment.

fsMplsLdpPeerEntry row .1.3.6.1.4.1.10876.101.1.13.1.10.6.1

Information about LDP peers known by Entities in
the fsmplsLdpEntityTable. The information in this table
is based on information from the Entity-Peer interaction
during session initialization but is not appropriate
for…

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsLdpPeerGrReconnectTime This object denotes the reconnect timeout value (in Seconds) advertised by LDP peer in FT session TLV in initialization message.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.10.6.1.1
fsMplsLdpPeerGrRecoveryTime This object denotes the recovery time value (in Seconds) advertised by LDP peer in FT session TLV in initialization message.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.10.6.1.2
fsMplsLdpPeerGrProgressStatus This object denotes the current State of the Peer's GR Progress. Following are the different State of Peer's GR Progress. 1. Not started. 2. Reconnection in progress. 3. Aborted. 4. Recovery in progress. 5. Completed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.13.1.10.6.1.3