SUPERMICRO-MIRSTP-MIB Table View

List of per virtual context RstModule Parameters

fsMIDot1wFutureRstEntry row .1.3.6.1.4.1.10876.101.1.119.1.3.1

Virtual Bridge RstModule Parameters.

Indexes

fsMIDot1wFutureRstContextId

Column	Syntax	OID
fsMIDot1wFutureRstContextId Identifies the Virtual Bridge Context.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.119.1.3.1.1
fsMIRstSystemControl The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP should be allocated and RSTP should be supported in the device …	Enumerationr/w Enumerated Values: 1 start 2 shutdown	.1.3.6.1.4.1.10876.101.1.119.1.3.1.2
fsMIRstModuleStatus The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be enabled in the device on all the ports. A v…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.119.1.3.1.3
fsMIRstTraceOption This object is used to enable Trace Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trac…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.119.1.3.1.4
fsMIRstDebugOption This object is used to enable Debug Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of De…	Integer32r/w Constraints: range: 0-524287	.1.3.6.1.4.1.10876.101.1.119.1.3.1.5
fsMIRstRstpUpCount The number of times RSTP Module has been enabled.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.6
fsMIRstRstpDownCount The number of times RSTP Module has been disabled.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.7
fsMIRstBufferFailureCount The number of times buffer overflows/failures have occurred. A Trap is generated on the occurrence of this event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.8
fsMIRstMemAllocFailureCount The number of times memory allocation failures have occurred. A Trap is generated on the occurrence of this event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.9
fsMIRstNewRootIdCount The number of times this Bridge has detected a new Root in the topology. A Trap is generated on the occurrence of this event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.10
fsMIRstPortRoleSelSmState This indicates the current state of the Port Role Selection State Machine. This object will hold the value 'initbridge' when the Port Role Selection state machine is in the INIT_BRIDGE state and the value of 'rolesel…	Enumeration Enumerated Values: 0 initbridge 1 roleselection	.1.3.6.1.4.1.10876.101.1.119.1.3.1.11
fsMIRstOldDesignatedRoot The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node.	SUPERMICRO-MIStdBRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.1.119.1.3.1.12
fsMIRstDynamicPathcostCalculation This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed(when the operational st…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.3.1.13
fsMIRstContextName This object is used to identity the context-name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.10876.101.1.119.1.3.1.14
fsMIRstCalcPortPathCostOnSpeedChg This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended for Link Aggregated ports where depening on Active ports spe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.3.1.15
fsMIRstClearBridgeStats This object is used to clear the statistical counters.When this object is set to TRUE,it resets the bridge specific counters and all the interface associated counters to zero.After resetting the counters the object…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.3.1.16
fsMIRstRcvdEvent This object gives information about the recently received event in the system. Currently we support only ConfigurationEvent.	Enumeration Enumerated Values: 1 configurationEvent 2 bpduEvent 3 timerExpiryEvent	.1.3.6.1.4.1.10876.101.1.119.1.3.1.17
fsMIRstRcvdEventSubType This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstRcvdEvent. For ConfigurationEvent, the sub-types supported are…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.119.1.3.1.18
fsMIRstRcvdEventTimeStamp The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent was received in the system at STP module for the last time. This object is introduced to measure the convergence time in RSTP modu…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.19
fsMIRstRcvdPortStateChangeTimeStamp The time stamp (in milli seconds) at which port state has been changed in the system. This object is introduced to measure the convergence time in RSTP module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.20
fsMIRstFlushInterval This time value, measured in units of hundredths of a second, controls the number of flush indications invoked from RSTP module. If set to zero, then normal port based flushing will take place in RSTP (…	centi-secondsInteger32r/w Constraints: range: 0-500	.1.3.6.1.4.1.10876.101.1.119.1.3.1.21
fsMIRstFlushIndicationThreshold This indicates the number of flush indications to go before timer method triggers. (i.e) The number of flush indications to trigger the FlushInterval Timer. This value can be configurable only when…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.119.1.3.1.22
fsMIRstTotalFlushCount The number of times flush is being triggered from the STP stack in case of RSTP mode.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.3.1.23
fsMIRstFwdDelayAltPortRoleTrOptimization When ROLE_TRANSLATION takes place from ALTERNATE to DESIGNATED, the value with which fdWhile timer started is controlled by this object configuration. 1. As per the standard IEEE 802.1Q 2005, which talks about MSTP im…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.119.1.3.1.24
fsMIRstBpduGuard This object configures BPDU guard globally in RSTP and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables BPDU Guard feature on edge ports globally and moves the …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.1.119.1.3.1.25

This is a table that is an extension to the dot1dStpExtPortTable.
This contains object(s) that are Port-based.

fsMIRstPortExtEntry row .1.3.6.1.4.1.10876.101.1.119.1.4.1

Each entry in this table is for each port present in the system.
This table is indexed by the fsMIRstPort.

Indexes

fsMIRstPort

Column	Syntax	OID
fsMIRstPort A unique value, greater than zero, indicating the Port number.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.10876.101.1.119.1.4.1.1
fsMIRstPortRole This indicates the current Port Role assumed by this Port.	Enumeration Enumerated Values: 0 disabledPort 1 alternatePort 2 backupPort 3 rootPort 4 designatedPort	.1.3.6.1.4.1.10876.101.1.119.1.4.1.2
fsMIRstPortOperVersion This indicates whether the Port is operationally in the Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting RST BPDUs or Config/TCN BPDUs.	Enumeration Enumerated Values: 0 stpCompatible 2 rstp	.1.3.6.1.4.1.10876.101.1.119.1.4.1.3
fsMIRstPortInfoSmState This indicates the current state of the Port Information state machine. This object will hold the value 'disabled' when the Port Information state machine is in the DISABLED state, the value 'aged' when the state mac…	Enumeration Enumerated Values: 0 disabled 1 aged 2 update 3 superior 4 repeat 5 notdesignated 6 present 7 receive 8 inferiordesignated	.1.3.6.1.4.1.10876.101.1.119.1.4.1.4
fsMIRstPortMigSmState This indicates the current state of the Port Protocol Migration state machine. This object will hold the value 'checkingrstp' when the Protocol Migration state machine is in the CHECKING_RSTP state, the value 'select…	Enumeration Enumerated Values: 0 checkingrstp 1 selectingstp 2 sensing	.1.3.6.1.4.1.10876.101.1.119.1.4.1.5
fsMIRstPortRoleTransSmState This indicates the current state of the Port Role Transition state machine. This object will hold the value 'init' when the Port Role Transition state machine is in the INIT state, the value 'disableport' when the sta…	Enumeration Enumerated Values: 0 init 1 disableport 2 disabledport 3 rootport 4 designatedport 5 backupport 6 rootproposed 7 rootagreed 8 reroot 9 rootforward 10 rootlearn 11 rerooted 12 designatedpropose 13 designatedsynced 14 designatedretired 15 designatedforward 16 designatedlearn 17 designatedlisten	.1.3.6.1.4.1.10876.101.1.119.1.4.1.6
fsMIRstPortStateTransSmState This indicates the current state of the Port State Transition state machine. This object will hold the value 'discarding' when the Port State Transition state machine is in the DISCARDING state, the value 'learning' …	Enumeration Enumerated Values: 0 discarding 1 learning 2 forwarding	.1.3.6.1.4.1.10876.101.1.119.1.4.1.7
fsMIRstPortTopoChSmState This indicates the current state of the Topology Change state machine. This object will hold the value 'inactive' when the Topology Change state machine is in the INACTIVE state, the value 'learning' when the state ma…	Enumeration Enumerated Values: 0 inactive 1 learning 2 detected 3 active 4 notifiedtcn 5 notifiedtc 6 propagating 7 acknowledged	.1.3.6.1.4.1.10876.101.1.119.1.4.1.8
fsMIRstPortTxSmState This indicates the current state of the Port Transmit state machine. This object will hold the value 'transmitinit' when the Port Transmit state machine is in the TRANSMIT_INIT state, the value 'transmitperiodic' when…	Enumeration Enumerated Values: 0 transmitinit 1 transmitperiodic 2 transmitconfig 3 transmittcn 4 transmitrstp 5 idle	.1.3.6.1.4.1.10876.101.1.119.1.4.1.9
fsMIRstPortRxRstBpduCount The number of RST BPDUs that have been received on this Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.10
fsMIRstPortRxConfigBpduCount The number of Config BPDUs that have been received on this Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.11
fsMIRstPortRxTcnBpduCount The number of TCN BPDUs that have been received on this Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.12
fsMIRstPortTxRstBpduCount The number of RST BPDUs that have been transmitted by this Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.13
fsMIRstPortTxConfigBpduCount The number of Config BPDUs that have been transmitted by this Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.14
fsMIRstPortTxTcnBpduCount The number of TCN BPDUs that have been transmitted by this Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.15
fsMIRstPortInvalidRstBpduRxCount The number of invalid RSTP BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.16
fsMIRstPortInvalidConfigBpduRxCount The number of invalid Configuration BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.17
fsMIRstPortInvalidTcnBpduRxCount The number of invalid TCN BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.18
fsMIRstPortProtocolMigrationCount The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP. A Trap is generated on the occurrence of this event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.19
fsMIRstPortEffectivePortState The effective Operational state of the port. This object will be set to TRUE only when the port is operationally up in the interface manager and the force Port State for this port and specified port state is enabled…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.20
fsMIRstPortAutoEdge This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.21
fsMIRstPortRestrictedRole A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Po…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.22
fsMIRstPortRestrictedTCN A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This parameter should be FALSE by default. If set it can cause t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.23
fsMIRstPortEnableBPDURx A Boolean value set by management. If FALSE, the BPDUs received on the port are ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.24
fsMIRstPortEnableBPDUTx A Boolean value set by management. If FALSE, no BPDUs are transmitted by this port. This variable should be FALSE before configuring port as a Layer Two Gateway Port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.25
fsMIRstPortPseudoRootId In RSTP Bridge, the fsMIRstPortPseudoRootId parameter value. By default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway Port as the RootId in generated BPDUs.	SUPERMICRO-MIStdBRIDGE-MIBBridgeIdr/w Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.1.119.1.4.1.26
fsMIRstPortIsL2Gp A Boolean value set by management. If TRUE, then port is functioning as a Layer Two Gateway Port. The fsMIRstPortEnableBPDUTx should be FALSE to set fsMIRstPortIsL2Gp to TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.27
fsMIRstPortLoopGuard A Boolean value set by management. If TRUE, then it will not age out the information even if the peer does not send information. If the port continues to receive information through BPDUs the operation on this port will…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.28
fsMIRstPortClearStats This object is used to clear the statistical counters.When this object is set to TRUE,it resets the given interface counters to zero.After resetting the counters the object is set to FALSE again.Configuration of this M…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.29
fsMIRstPortRcvdEvent This object gives information about the recently received event in the system. Currently we support only ConfigurationEvent.	Enumeration Enumerated Values: 1 configurationEvent 2 bpduEvent 3 timerExpiryEvent	.1.3.6.1.4.1.10876.101.1.119.1.4.1.30
fsMIRstPortRcvdEventSubType This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstPortRcvdEvent. For ConfigurationEvent, the sub-types supported…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.119.1.4.1.31
fsMIRstPortRcvdEventTimeStamp This object gives the time stamp (in milli seconds) at which the event specified by the object fsRstPortRcvdEvent was received in the system. This object was introduced to measure the convergence time in RSTP module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.32
fsMIRstPortStateChangeTimeStamp This object gives the time stamp (in milli seconds) when the port state is updated to forwarding path for any instance on this port. This object is introduced to measure the convergence time in RSTP module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.119.1.4.1.33
fsMIRstPortRowStatus This object is used to create or delete interfaces at RSTP module level.Ports can be created at RSTP module level only for ports that have been created in Interface manager and mapped to a context . This is applicable o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.119.1.4.1.34
fsMIRstLoopInconsistentState A Boolean value set when the non-designated port on expiry of received information while timer transitions to Designated/Discarding state when the superior BPDU's are not received with the loop guard feature being ena…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.119.1.4.1.35
fsMIRstPortBpduGuard This configures the BPDU guard feature on this port and has higher priority over Global BPDU Guard. Enable - prevents temporary loops and applicable to ports and moves the port to disabled discarding state when BPDU is…	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.10876.101.1.119.1.4.1.36

List of per virtual bridge TrapsControl Info.

fsMIDot1wFsRstTrapsControlEntry row .1.3.6.1.4.1.10876.101.1.119.2.3.1

Virtual bridge TrapsControl information.

Indexes

fsMIDot1wFutureRstContextId

Column	Syntax	OID
fsMIRstSetTraps This object is used to enable and disable context-specific RSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - Protocol up or down traps. 2 - Exception Traps like port protocol migration or i…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.10876.101.1.119.2.3.1.1
fsMIRstGenTrapType Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN	Enumeration Enumerated Values: 0 none 1 up 2 down	.1.3.6.1.4.1.10876.101.1.119.2.3.1.2

This table is used to store the notification information
occurred in each of the port for protocol migration and 
invalid packet received

fsMIRstPortTrapNotificationEntry row .1.3.6.1.4.1.10876.101.1.119.2.4.1

This entry is used to store the notification information

Indexes

fsMIRstPortTrapIndex

Column	Syntax	OID
fsMIRstPortTrapIndex A unique value, greater than zero, indicating the Port number.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.10876.101.1.119.2.4.1.1
fsMIRstPortMigrationType Port Protocol migration type occurred in the port	Enumeration Enumerated Values: 0 sendstp 1 sendrstp	.1.3.6.1.4.1.10876.101.1.119.2.4.1.2
fsMIRstPktErrType Type of invalid packet received in each of the port	Enumeration Enumerated Values: 0 protocolIdErr 1 invalidBpdu 2 configLengthErr 3 tcnLengthErr 4 rstpLengthErr 5 maxAgeErr 6 fwdDelayErr 7 helloTimeErr	.1.3.6.1.4.1.10876.101.1.119.2.4.1.3
fsMIRstPktErrVal Packet error value corresponding to the above type	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.119.2.4.1.4
fsMIRstPortRoleType Particular Role Selected for the Port	Enumeration Enumerated Values: 0 disabledPort 1 alternatePort 2 backupPort 3 rootPort 4 designatedPort	.1.3.6.1.4.1.10876.101.1.119.2.4.1.5
fsMIRstOldRoleType Particular Role which is existing for the Port	Enumeration Enumerated Values: 0 disabledPort 1 alternatePort 2 backupPort 3 rootPort 4 designatedPort	.1.3.6.1.4.1.10876.101.1.119.2.4.1.6