SUPERMICRO-MEF-MIB Table View

This table contains list of per virtual context MEF Module Parameters.

fsMefContextEntry row .1.3.6.1.4.1.10876.101.2.71.1.1.1

Each entry contains virtual context MEF module parameters.

Indexes

fsMefContextId

Column	Syntax	OID
fsMefContextId Identifies the virtual context in the system	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.1.1.1.1
fsMefContextName Name of the virtual context	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.10876.101.2.71.1.1.1.2
fsMefTransmode The object defines under lying transport mode dot1ad - Provider Bridge as transport mode mplspw - MPLS cloud as transport mode	Enumerationr/w Enumerated Values: 1 dot1ad 2 mplspw	.1.3.6.1.4.1.10876.101.2.71.1.1.1.3
fsMefFrameLossBufferClear Trigger to remove the contents of Buffer maintained for storing frame-loss measured at various times. Note: Get operation value should be ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.1.1.1.4
fsMefFrameDelayBufferClear Trigger to remove the contents of Buffer maintained for storing frame-delay measured at various times. Note: Get operation value should be ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.1.1.1.5
fsMefFrameLossBufferSize The Maximum number of entries for the Frame Loss Buffer.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.10876.101.2.71.1.1.1.6
fsMefFrameDelayBufferSize The Maximum number of entries for the Frame Delay Buffer.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.10876.101.2.71.1.1.1.7

This table contains list of the UNIs configured on the system.

fsUniEntry row .1.3.6.1.4.1.10876.101.2.71.2.1.1

This entry represents UNI and its service attributes.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fsUniId The UNI Identifier is independent of the EVCs at the UNI. It is assigned to the UNI by the Service Provider. It must be a string and the string may have any value. The UNI Identifier MUST be unique among all UNIs for…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.10876.101.2.71.2.1.1.1
fsUniPhysicalMedium It always return ethernetCsmacd (6).	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.4.1.10876.101.2.71.2.1.1.2
fsUniSpeed Speed is bits per second,It is dependent on the ethernet type. The speed should be one of the give below. - 10 Mbps - 100 Mbps - 10 or 100 Mbps Auto Negotiation - 1 Gbps - 10 Gbps.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.2.1.1.3
fsUniMode This mode defines the type of communication between the CE and UNI.	Enumeration Enumerated Values: 1 fullDuplex 2 halfDuplex	.1.3.6.1.4.1.10876.101.2.71.2.1.1.4
fsUniMacLayer It should return IEEE 802.3 - 2005	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.2.71.2.1.1.5
fsUniMtu The size of the largest packet which can be sent and received on the interface, specified in octets.For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram tha…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.71.2.1.1.6
fsUniServiceMultiplexingBundling This object specifies the UNI service attributes. service-Multiplexing : This bit specifies whether the UNI supports multiple EVCs. Point-to-Point EVCs and Multipoint-to-Multipoint EVCs may be multiplexe…	Bitsr/w Enumerated Values: 0 serviceMultiplexing 1 bundling 2 allToOneBundling	.1.3.6.1.4.1.10876.101.2.71.2.1.1.7
fsUniCVlanId A 12-bit UNI CE-VID to be used for untagged frames received	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.2.71.2.1.1.8
fsUniMaxEvcs This attribute defines the maximum number of EVCs that the UNI can support. It MUST have a value of at least one.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.71.2.1.1.9
fsUniL2CPDot1x The object to specify whether to discard or peer or tunnel the Dot1x packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.10
fsUniL2CPLacp The object to specify whether to discard or peer or tunnel the LACP packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.11
fsUniL2CPStp The object to specify whether to discard or peer or tunnel the STP packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.12
fsUniL2CPGvrp The object to specify whether to discard or peer or tunnel the GVRP packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.13
fsUniL2CPGmrp The object to specify whether to discard or peer or tunnel the GMRP packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.14
fsUniL2CPMvrp The object to specify whether to discard or peer or tunnel the MVRP packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.15
fsUniL2CPMmrp The object to specify whether to discard or peer or tunnel the MMRP packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.16
fsUniL2CPLldp The object to specify whether to discard or peer or tunnel the LLDP packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.17
fsUniL2CPElmi The object to specify whether to discard or peer or tunnel the ELMI packets received on this port.	UniL2CPStatusr/w Type Values: 1 peer 2 tunnel 3 discard	.1.3.6.1.4.1.10876.101.2.71.2.1.1.18
fsUniRowStatus Row Status for the UNI table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.2.1.1.19

This table contains list of the EVCs locally configured 
on the system.

fsEvcEntry row .1.3.6.1.4.1.10876.101.2.71.3.1.1

This entry represents EVC and its attributes.

Indexes

fsEvcContextId fsEvcIndex

Column	Syntax	OID
fsEvcContextId Identifies the Virtual Bridge Context.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.71.3.1.1.1
fsEvcIndex This object indicates service provider VLAN (S-VLAN) if value is less than 4094. If the value is greater than 4094 this object indicates VFI	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.2.71.3.1.1.2
fsEvcId An arbitrary string, unique across the MEN, for the EVC supporting the service instance.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.10876.101.2.71.3.1.1.3
fsEvcType There are three type of EVC. Point-to-Point : In a Point-to-Point EVC (E-Line), exactly two UNIs must be associated with one another. Multipoint-to-Multipoint : In a Multipoint-to-Multipoin…	Enumerationr/w Enumerated Values: 1 pointtoPoint 2 multipointtoMultipoint 3 rootedMultipoint	.1.3.6.1.4.1.10876.101.2.71.3.1.1.4
fsEvcMaxUni The Maximum Number of UNIs (MNU) service attribute specifies the maximum number of UNIs allowed in the UNI List service attribute. For a Point-to-Point EVC, MNU must be two. For a Multipoint EVC, MNU must be two or gr…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.71.3.1.1.5
fsEvcCVlanIdPreservation An EVC attribute in which the CE-VLAN ID of an egress Service Frame is identical to the CE-VLAN ID of the corresponding ingress Service Frame. If set to true CE-VLAN ID should be preserved.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.3.1.1.6
fsEvcCVlanCoSPreservation In an EVC with CE-VLAN CoS Preservation set (true), an egress Service Frame resulting from an ingress Service Frame that contains a CE-VLAN CoS must have the identical CE-VLAN CoS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.3.1.1.7
fsEvcRowStatus Row Status for the UNI table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.3.1.1.8

This table contains list of the EVC's Unicast, Multicast frame
delivery conditions. Service Frame received on EVC can be Discarded,
Deliver Unconditionally or Deliver Conditionally. In case of deliver
conditionally all objects are mandatory in this table. In case of
Discard fsEvcFilterDestMacAddress object should not be configured.
In case of deliver unconditionally this table is optional

fsEvcFilterEntry row .1.3.6.1.4.1.10876.101.2.71.3.2.1

This entry represents EVC's one of the frame delivery conditions.

Indexes

fsEvcContextId fsEvcIndex fsEvcFilterInstance

Column	Syntax	OID
fsEvcFilterInstance If multiple conditions are mapped to the same EVC, this index is used to uniquely identify the individual row	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.10876.101.2.71.3.2.1.1
fsEvcFilterDestMacAddress Destination MAC address to be matched with the service frame Destination MAC address.In case if service frame delivery condition is drop. This field is not mandatory. In case of service fame delivery is conditional this…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.71.3.2.1.2
fsEvcFilterAction Specifies the action to be taken on the service frame.	Enumerationr/w Enumerated Values: 1 allow 2 drop	.1.3.6.1.4.1.10876.101.2.71.3.2.1.3
fsEvcFilterId Specifies the filter number. This filter id should be unique across the EVCs and virtual contexts	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.71.3.2.1.4
fsEvcFilterRowStatus Row Status for the EVC Filter table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.3.2.1.5

This table is used to configure the E-Tree feature.

fsMefETreeEntry row .1.3.6.1.4.1.10876.101.2.71.4.1.1

Each entry in this table gives a ingress port to egress port mapping.

Indexes

fsMefETreeIngresPort fsMefETreeEvcIndex fsMefETreeEgressPort

Column	Syntax	OID
fsMefETreeIngresPort This object specifies the ingress port ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.71.4.1.1.1
fsMefETreeEvcIndex This object specifies the EVC on which E-Tree service to be configured	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.2.71.4.1.1.2
fsMefETreeEgressPort This object specifies one of the allowed egress ports for the given ingress port identified by the first index for this row.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.71.4.1.1.3
fsMefETreeRowStatus Denotes the Row Status for port E-Tree table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. 'CreateAndWait' and 'notInService' values are not allowed. Example: To add ports…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.4.1.1.4

This table contains list of the CE-VLAN ID UNI ID mapped with EVC.

fsUniCVlanEvcEntry row .1.3.6.1.4.1.10876.101.2.71.5.1.1

This entry represents UNI,CE-VLAN and EVC mapping.

Indexes

IF-MIBifIndex fsUniCVlanEvcCVlanId

Column	Syntax	OID
fsUniCVlanEvcCVlanId This object represents the CE-VLAN that needs to be mapped to the EVC	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.2.71.5.1.1.1
fsUniCVlanEvcEvcIndex This object represents the EVC to which the CE-VLAN at the UNI to be mapped	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.71.5.1.1.2
fsUniCVlanEvcRowStatus This indicates the rowstatus of an entry in this table used to map/unmap CE-VLAN to EVC at the UNI used to create and delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.5.1.1.3

A table to configure filter rule used by the classifier table.

fsMefFilterEntry row .1.3.6.1.4.1.10876.101.2.71.6.1.1

Each entry in this table is a filter rule Index to the table
is filter number.

Indexes

fsMefFilterNo

Column	Syntax	OID
fsMefFilterNo Filter rule number.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.2.71.6.1.1.1
fsMefFilterDscp The IP Dscp value to be checked against the packet. This object is configured when CoS ID section is based on the DSCP. A value of '-1' means, the DSCP Field becomes do not care.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.10876.101.2.71.6.1.1.2
fsMefFilterDirection Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It is applied on UNI ingress traffic. When the direction of th…	Enumerationr/w Enumerated Values: 1 in 2 out	.1.3.6.1.4.1.10876.101.2.71.6.1.1.3
fsMefFilterEvc This object represents the EVC for which the bandwidth profiles to configured based. This also represents the CoS identifier selection based on the EVC	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.10876.101.2.71.6.1.1.4
fsMefFilterCVlanPriority Customer Vlan Priority present in traffic.This object is configured when CoS ID section is based on the priority code point field of the CE-VLAN. A value of '-1' means the CE-VLAN PCP becomes do not care.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.10876.101.2.71.6.1.1.5
fsMefFilterIfIndex This Object represents the UNI on which the filter should be applied.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.71.6.1.1.6
fsMefFilterStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.6.1.1.7

This table contains the Multifield Classifier details. It takes input
from the table fsMefFilterTable and outputs a CLASS for the
traffic-class pattern/match.

fsMefClassMapEntry row .1.3.6.1.4.1.10876.101.2.71.6.2.1

A Multi-field Classifier entry maps fsMefFilterTable to a CLASS

Indexes

fsMefClassMapId

Column	Syntax	OID
fsMefClassMapId An index that enumerates the MultiField Classifier table.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.2.1.1
fsMefClassMapName This object indicates the name for the classmap Entry.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.10876.101.2.71.6.2.1.2
fsMefClassMapFilterId This Object specifies the index of the fsMefFilterTable, the details of which should be matched against the incoming packet.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.71.6.2.1.3
fsMefClassMapCLASS This represents the traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the logical groups that represent this CLASS. Multiple filter entries can map to the same CLASS value…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.71.6.2.1.4
fsMefClassMapStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. CreateAndGo not allowed ,it can be deleted 'destroy', only if it is not referenced by other tab…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.6.2.1.5

This table assigns is provided for easy mapping of CLASS policymap
and class map tables.

fsMefClassEntry row .1.3.6.1.4.1.10876.101.2.71.6.3.1

An entry specifies CLASS used to map policymap and class map tables.

Indexes

fsMefClassCLASS

Column	Syntax	OID
fsMefClassCLASS This represents the Traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the traffic class patterns that represent this CLASS. Multiple filter entries can map to the same CLA…	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.3.1.1
fsMefClassStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. it can be deleted 'destroy', only if it is not referenced by other table; otherwise return inco…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.6.3.1.2

This table enumerates specific meters that a system may use to
police a stream of traffic. This may include all traffic on an
interface.

fsMefMeterEntry row .1.3.6.1.4.1.10876.101.2.71.6.4.1

An entry in the meter table describes a single conformance level
of a meter.

Indexes

fsMefMeterId

Column	Syntax	OID
fsMefMeterId An index that enumerates the Meter entries.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.4.1.1
fsMefMeterName This indicates the Name for the meter entry. It should be unique in this Table.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.10876.101.2.71.6.4.1.2
fsMefMeterType The Metering algorithm associated with the Token Bucket meter. It supports only mefDecoupledMeter(6), mefCoupledMeter(7) types.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.4.1.3
fsMefMeterColorMode The user defined Meter Color Mode.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.4.1.4
fsMefMeterCIR The committed information rate as per MEF. Must be >= 0. CIR must be less than or equal to EIR, if EIR > 0	Unsigned32r/w Constraints: range: 0-10485760	.1.3.6.1.4.1.10876.101.2.71.6.4.1.5
fsMefMeterCBS The committed burst size as per MEF. Must be > 0 if CIR > 0. Maximum allowable size will be jumbo frame size.	BytesUnsigned32r/w Constraints: range: 0-10485760	.1.3.6.1.4.1.10876.101.2.71.6.4.1.6
fsMefMeterEIR The excess information rate as per MEF. Must be >= 0. EIR must be greater than or equal to CIR, if EIR > 0.	Unsigned32r/w Constraints: range: 0-10485760	.1.3.6.1.4.1.10876.101.2.71.6.4.1.7
fsMefMeterEBS The excess burst size as per MEF. Must be > 0 if EIR > 0.	BytesUnsigned32r/w Constraints: range: 0-10485760	.1.3.6.1.4.1.10876.101.2.71.6.4.1.8
fsMefMeterStatus The status of this conceptual row. All writable objects in this row may be modified only of the Entry is not ACTIVE. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsisten…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.6.4.1.9

This table contains the class-map to policy-map mapping 
details.

fsMefPolicyMapEntry row .1.3.6.1.4.1.10876.101.2.71.6.5.1

An entry to map a policy for a class-map.

Indexes

fsMefPolicyMapId

Column	Syntax	OID
fsMefPolicyMapId An index that enumerates the policy-map table entries.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.5.1.1
fsMefPolicyMapName This the Name for a policy entry. It should be unique in this Table.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.10876.101.2.71.6.5.1.2
fsMefPolicyMapCLASS This indicates the Traffic CLASS for which the policy-map needs to be applied. A valid value is not necessary for creation of an entry in this table. When this object is configured as dont-care(0), it is mandatory that …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.5.1.3
fsMefPolicyMapMeterTableId The Object refers to a Meter table Id which is the index for the Meter table. A Valid value of this object is not mandatory for the creation of an entry in this table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.6.5.1.4
fsMefPolicyMapStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.6.5.1.5

The Maintenance Entity Group End Point (MEP) table. The indexs of the
Table fsMefContextId, fsMefMegIndex, fsMefMeIndex, fsMefMepIdentifier
points to the fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex,
fsMIY1731MepIdentifier. Entries in the table will not be created
by configuring this table. These entities have to be created explicitly
in ECFM module.

fsMefMepEntry row .1.3.6.1.4.1.10876.101.2.71.7.1.1

The MEP table entry

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier

Column	Syntax	OID
fsMefMegIndex Internally this object will refer to mib object dot1agCfmMdIndex of ECFM and fsMIY1731MegIndex of Y1731.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.1
fsMefMeIndex Internally this object will refer to mib object dot1agCfmMaIndex of ECFM and fsMIY1731MeIndex of Y1731	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.2
fsMefMepIdentifier Internally this object will refer to mib object dot1agCfmMepIdentifier of ECFM and fsMIY1731MepIdentifier of Y1731	IEEE8021-CFM-MIBDot1agCfmMepId Type Constraints: range: 1..8191	.1.3.6.1.4.1.10876.101.2.71.7.1.1.3
fsMefMepTransmitLmmStatus An Enumerated value set to 'start' to initiate LM transmission and 'stop' to stop LM transmission. 'ready' and 'notReady' indicates whether LM can be initiated or not. Note: User can not set to 'ready' o…	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.10876.101.2.71.7.1.1.4
fsMefMepTransmitLmmResultOK Indicates the result of the operation: - true The Loss measurement Message (LMM) will be (or has been) sent. - false The Loss measurement Message (LMM) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.5
fsMefMepTransmitLmmInterval Interval between two successive LMM transmissions to be used by the MEP.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731LmmIntervalr/w Type Values: 1 interval100ms 2 interval1s 3 interval10s 4 interval1min 5 interval10min	.1.3.6.1.4.1.10876.101.2.71.7.1.1.6
fsMefMepTransmitLmmDeadline Specify a timeout, in seconds, before loss measurement exits. Loss Measurement exits, if configured number of messages are sent before timeout.	Unsigned32r/w Constraints: range: 1-172800	.1.3.6.1.4.1.10876.101.2.71.7.1.1.7
fsMefMepTransmitLmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.8
fsMefMepTransmitLmmPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.2.71.7.1.1.9
fsMefMepTransmitLmmDestMacAddress The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for LMM.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.71.7.1.1.10
fsMefMepTransmitLmmDestMepId An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column f…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.10876.101.2.71.7.1.1.11
fsMefMepTransmitLmmDestIsMepId True indicates that MEPID of the target MEP is used for LM frame transmission. False indicates that unicast destination MAC address of the target MEP is used for Frame Loss Measurement transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.12
fsMefMepTransmitLmmMessages The number of LMM messages to be transmitted.	Integer32r/w Constraints: range: 1-8192	.1.3.6.1.4.1.10876.101.2.71.7.1.1.13
fsMefMepTxFCf The counter of in-profile data frames transmitted towards its peer MEP transmitted in the last CCM or LMM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.14
fsMefMepRxFCb The counter of in-profile data frames received from its peer MEP at the time of receiving the last CCM frame.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.15
fsMefMepTxFCb The value of fsMefMepTxFCf field in the last CCM or LMR frame received from its peer MEP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.16
fsMefMepNearEndFrameLossThreshold Threshold value for the near-end frame loss. Notification is sent to Management Application if calculated near-end frame loss exceeds configured threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.17
fsMefMepFarEndFrameLossThreshold Threshold value for the far-end frame loss. Notification is sent to Management Application if calculated far-end frame loss exceeds configured threshold. This refers to Oneway Frame Loss ratio objective mentioned in se…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.18
fsMefMepTransmitDmStatus An Enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM transmission. 'ready' and 'notReady' indicates whether 1DM or DMM can be initiated or not. Note: Use…	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.10876.101.2.71.7.1.1.19
fsMefMepTransmitDmResultOK Indicates the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Delay measurement Message (1DM or DMM) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.20
fsMefMepTransmitDmType Type of delay measurement to be initiated: - oneWay(1) Measurement (by 1DM) is calculated at destination end. - twoWay(2) Measurement (by DMM-DMR) is calculated at initiation end.	Enumerationr/w Enumerated Values: 1 oneWay 2 twoWay	.1.3.6.1.4.1.10876.101.2.71.7.1.1.21
fsMefMepTransmitDmInterval Interval between two successive DM messages (1DM or DMM) transmissions to be used by the MEP. This refers to the interval between frame pairs as mentioned in section 6.9.4 of MEF 10.2 standard.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.10876.101.2.71.7.1.1.22
fsMefMepTransmitDmMessages The number of DM (1DM or DMM) messages to be transmitted.	Integer32r/w Constraints: range: 1-8192	.1.3.6.1.4.1.10876.101.2.71.7.1.1.23
fsMefMepTransmitDmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the transmitted DMM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.24
fsMefMepTransmit1DmDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the transmitted 1DM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.25
fsMefMepTransmitDmmPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted DMM frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.2.71.7.1.1.26
fsMefMepTransmit1DmPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted 1DM frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.2.71.7.1.1.27
fsMefMepTransmitDmDestMacAddress The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for 1DM or DMM.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.71.7.1.1.28
fsMefMepTransmitDmDestMepId An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column f…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.10876.101.2.71.7.1.1.29
fsMefMepTransmitDmDestIsMepId True indicates that MEPID of the target MEP is used for Delay frame transmission. False indicates that unicast destination MAC address of the target MEP is used for Delay frame transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.30
fsMefMepTransmitDmDeadline Specify a timeout, in seconds, before Delay Measurement operation exits. Delay Measurement operation exits, if configured number of messages are sent before timeout.	Unsigned32r/w Constraints: range: 1-172800	.1.3.6.1.4.1.10876.101.2.71.7.1.1.31
fsMefMepDmrOptionalFields Indicates whether to include optional fields in the DMR Frame or not. True indicates optional fields are to be included and False indicates optional fields are not included. Optional fields are included …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.1.1.32
fsMefMep1DmRecvCapability The administrative status of 1DM Frame reception. This enables or disables the capability of MEP to process the 1DM Frames. A value of 'enabled' (1) indicates to accept and process 1DM Frames. A value of 'disabled' (2…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.71.7.1.1.33
fsMefMepFrameDelayThreshold Threshold (in microseconds) for the Frame delay. Notification is sent to Management application if calculated frame delay exceeds configured threshold. This refers to Inter Frame Delay Variation Performance Objective m…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.34
fsMefMepRowStatus Indicates the status of MEP row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are row status active and row st…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.7.1.1.35
fsMefMepRxFCf The value of fsMefMepRxFCf field is the value of in-profile data frames received from its peer MEP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.1.1.36
fsMefMep1DmTransInterval Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement canno…	Integer32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.10876.101.2.71.7.1.1.37

This table extends the MEP table and contains a list of
information about the Frame Delay measured at various times by a 
MEP.
Size of this table is defined by the object
fsMefFrameDelayBufferSize. If the addition of a frame delay entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame delay entry.
          
Delay Measured can be of one-way or two-way.

fsMefFdEntry row .1.3.6.1.4.1.10876.101.2.71.7.2.1

The Frame delay buffer table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFdTransId fsMefFdSeqNumber

Column	Syntax	OID
fsMefFdTransId Identifies a delay measurement transaction.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.2.1.1
fsMefFdSeqNumber Locally maintained sequence number of FD Entries	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.2.1.2
fsMefFdTxTimeStampf TxTimeStampf value sent in a Delay measurement message (DMM). or received in 1DM frame.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.2.1.3
fsMefFdMeasurementTimeStamp Time at which measurement takes place.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.10876.101.2.71.7.2.1.4
fsMefFdPeerMepMacAddress Identifies the Mac Address of the peer MEP to which DM message(s) is sent.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.71.7.2.1.5
fsMefFdIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which measurement takes place is attached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.71.7.2.1.6
fsMefFdDelayValue This object contains the measured frame delay value. This refers to One way Frame Delay mentioned in section 6.9.2 of MEF 10.2 standard.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.2.1.7
fsMefFdIFDV Inter frame delay variation, (IFDV), calculated with respect to current transaction. This refers to Inter Frame Delay variation mentioned in section 6.9.4 of MEF 10.2 standard.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.2.1.8
fsMefFdFDV Frame delay variation, (IFDV), calculated with respect to current transaction.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.2.1.9
fsMefFdMeasurementType Type of the frame-delay measurement (oneWay or twoWay).	Enumeration Enumerated Values: 1 oneWay 2 twoWay	.1.3.6.1.4.1.10876.101.2.71.7.2.1.10

This table extends the MEP table and contains output of one-way and 
two-way delay measurement transaction.

fsMefFdStatsEntry row .1.3.6.1.4.1.10876.101.2.71.7.3.1

The Delay Statistics table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFdTransId

Column	Syntax	OID
fsMefFdStatsTimeStamp Time stamp at which one-way or two-way delay measurement (DMM) is initiated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.10876.101.2.71.7.3.1.1
fsMefFdStatsDmmOut Number of DMMs sent for a two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.3.1.2
fsMefFdStatsDmrIn Number of requests received for a one-way or responses received for two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.3.1.3
fsMefFdStatsDelayAverage Average delay measured for a one-way or two-way delay measurement transaction. This refers to one way mean delay of section 6.9.2 of MEF 10.2	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.3.1.4
fsMefFdStatsFDVAverage Frame Delay Variation (FDV) average calculated for a delay measurement transaction.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.3.1.5
fsMefFdStatsIFDVAverage Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.3.1.6
fsMefFdStatsDelayMin This object contains the minimum value of frame-delay.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.3.1.7
fsMefFdStatsDelayMax This object contains the maximum value of frame-delay.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.2.71.7.3.1.8

This table extends the MEP table and contains a information about
the Frame-loss measured at various times by a MEP. 
          
Size of this table is defined by the object
fsMefFrameLossBufferSize. If the addition of a frame loss entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame loss entry.

fsMefFlEntry row .1.3.6.1.4.1.10876.101.2.71.7.4.1

The Frame Loss Statistics table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFlTransId fsMefFlSeqNumber

Column	Syntax	OID
fsMefFlTransId Identifies a loss measurement transaction.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.4.1.1
fsMefFlSeqNumber Locally maintained sequence number of Frame Loss Entries	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.4.1.2
fsMefFlMeasurementTimeStamp Time at which frame-loss is actually measured.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.10876.101.2.71.7.4.1.3
fsMefFlPeerMepMacAddress Identifies the Mac Address of the peer MEP to which loss measurement message(s) is sent.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.71.7.4.1.4
fsMefFlIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which measurement takes place is attached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.71.7.4.1.5
fsMefFlFarEndLoss This object contains the far-end frame-loss value.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.4.1.6
fsMefFlNearEndLoss This object contains the near-end frame-loss value.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.4.1.7
fsMefFlMeasurementTime Time taken to measure frame-loss.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.10876.101.2.71.7.4.1.8

This table extends the MEP table and contains output of 
frame-loss measurement transaction.

fsMefFlStatsEntry row .1.3.6.1.4.1.10876.101.2.71.7.5.1

The Frame Loss Statistics table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFlTransId

Column	Syntax	OID
fsMefFlStatsTimeStamp Time stamp at which frame-loss measurement transaction is initiated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.10876.101.2.71.7.5.1.1
fsMefFlStatsMessagesOut Number of frames with ETH-LM information sent for a transaction.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.2
fsMefFlStatsMessagesIn Number of frames with ETH-LM information received for a transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.3
fsMefFlStatsFarEndLossAverage Average of the far-end frame-loss measured for a transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.4
fsMefFlStatsNearEndLossAverage Average of the near-end frame-loss measured for a transaction.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.5
fsMefFlStatsMeasurementType Type of the frame-loss measurement (Single-ended or Dual-ended) done.	Enumeration Enumerated Values: 1 singleEnded 2 dualEnded	.1.3.6.1.4.1.10876.101.2.71.7.5.1.6
fsMefFlStatsFarEndLossMin This object contains the minimum value of far-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.7
fsMefFlStatsFarEndLossMax This object contains the maximum value of far-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.8
fsMefFlStatsNearEndLossMin This object contains the minimum value of near-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.9
fsMefFlStatsNearEndLossMax This object contains the maximum value of near-end frame-loss.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.5.1.10

The Maintenance Entity Group End Point (MEP) Availability 
table.
          
Each row in the table is associated with a different MEP. 
          
This table uses three indices. The first two indices are the
indices of the Maintenance Entity Group (MEG) and Maintenance 
Entity (ME) tables, the reason being that a MEP is always 
related to an ME and MEG.
          
The MEP table stores all the managed objects for availability
measurement.
          
The objects which are used to initiate a transaction are to
be set only when the row-status of the table is active.
'fsMefMepTransmit' naming convention is used to isolate 
these objects from the others.

fsMefMepAvailabilityEntry row .1.3.6.1.4.1.10876.101.2.71.7.6.1

The MEP Availability table entry

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier

Column	Syntax	OID
fsMefMepAvailabilityStatus An Enumerated value set to 'start' to initiate Availability Measurement and 'stop' to stop Availability Measurement. 'ready' and 'notReady' indicates whether Availability Measurement can be initiated or not. …	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatusr/w Type Values: 0 ready 1 notReady 2 start 3 stop	.1.3.6.1.4.1.10876.101.2.71.7.6.1.1
fsMefMepAvailabilityResultOK Indicates the result of the operation: - true Initiating Availability measurement by sending LM Message (LMM) is successful. - false Initiating Availability measurement has f…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.6.1.2
fsMefMepAvailabilityInterval A time interval much smaller than Deadline, Interval between two successive LMM transmissions to be used by the MEP for calculating Availability.	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731AvailabilityIntervalr/w Type Values: 1 interval100ms 2 interval1s 3 interval10s 4 interval1min 5 interval10min 6 interval30min 7 interval1hour	.1.3.6.1.4.1.10876.101.2.71.7.6.1.3
fsMefMepAvailabilityDeadline Specify a timeout, in seconds, the Time interval to conduct the availability functionality	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.6.1.4
fsMefMepAvailabilityLowerThreshold Availability frame loss ratio threshold, the lower threshold used to define an interval as available. If far-end loss ratio is lesser than configured lower threshold, that interval will be declared as available. Availa…	OctetStringr/w Constraints: range: 1-6	.1.3.6.1.4.1.10876.101.2.71.7.6.1.5
fsMefMepAvailabilityUpperThreshold Unavailability frame loss ratio threshold, the upper threshold to define an interval as unavailable. If far-end loss ratio is greater than configured upper threshold, that interval will be declared as unavailable. Exam…	OctetStringr/w Constraints: range: 1-6	.1.3.6.1.4.1.10876.101.2.71.7.6.1.6
fsMefMepAvailabilityModestAreaIsAvailable Defines whether the area between upper and lower threshold is referred as available or unavailable. True - If Calculated Frame loss ratio falls between upper and lower threshold, it will…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.6.1.7
fsMefMepAvailabilityWindowSize Number of consecutive small time intervals for assessing availability	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.6.1.8
fsMefMepAvailabilityDestMacAddress The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Availability Measurement.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.2.71.7.6.1.9
fsMefMepAvailabilityDestMepId An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column f…	IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.10876.101.2.71.7.6.1.10
fsMefMepAvailabilityDestIsMepId True indicates that MEPID of the target MEP is used for LMM transmission during Availability Measurement. False indicates that unicast destination MAC address of the target MEP is used for LMM transmission during Availa…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.6.1.11
fsMefMepAvailabilityType defStatic indicates that the algorithm for Availability Measurement is static window algorithm. The availability measurement will be conducted as per MEF 10.2 (Section 6.9.7. Availability Performance for a Point-to-Po…	SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731AvailabilityTyper/w Type Values: 1 defStatic 2 defSliding	.1.3.6.1.4.1.10876.101.2.71.7.6.1.12
fsMefMepAvailabilitySchldDownInitTime Time when Scheduled down time is initiated, denotes the beginning of time interval agreed upon by both the Subscriber and Service Provider during which a service may be disabled by the Service Provider. Init Time shou…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.6.1.13
fsMefMepAvailabilitySchldDownEndTime Time when Scheduled down time is ending, denotes the ending of time interval agreed upon by both the Subscriber and Service Provider during which a service may be disabled by the Service Provider. End Time should be def…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.71.7.6.1.14
fsMefMepAvailabilityPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.2.71.7.6.1.15
fsMefMepAvailabilityDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.71.7.6.1.16
fsMefMepAvailabilityPercentage This object contains the percentage of Availability If fsMefMepAvailabilityType is selected as defStatic, this object contains the Availability Performance metric as defined in MEF 10.2 (Section 6.9.7. …	OctetString Constraints: range: 1-6	.1.3.6.1.4.1.10876.101.2.71.7.6.1.17
fsMefMepAvailabilityRowStatus Indicates the status of MEP Availability Table row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.71.7.6.1.18