SUPERMICRO-LSP-PING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
115

fsLsppGlobalConfigTable

table
.1.3.6.1.4.1.10876.101.1.13.11.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsLsppGlobalConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-LSP-PING-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LSP-PING-MIB::fsLsppGlobalConfigTable' 
This table contains all the global configurations of LSP ping 
per virtual context of the router.
fsLsppGlobalConfigTableEntry row .1.3.6.1.4.1.10876.101.1.13.11.1.1.1
This represents per virtual context LSP Ping Global parameters.
An entry in this table is created as an when a virtual context
is created.
Indexes
Column Syntax OID
fsLsppContextId
The unique identifier to identify the virtual router context.
Currently, the implementation supports only a single virtual
instance of the router.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.1
fsLsppSystemControl
This object specifies the administrative system control status
for LSP ping. The value start(1) indicates that LSP ping should
be active in the virtual context. All the required databases for
this context will be cre…
Enumerationr/w
Enumerated Values:
1start
2shutdown
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.2
fsLsppTrapStatus
This object is used to enable or disable LSP Ping traps.

Trap Types:
TrapPingCompletion : Generated when ping operation
gets completed and contains the
…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.3
fsLsppTraceLevel
This object is to enable or disable traces and to specify
different trace levels.

The bit positions to enable different traces are:

0x0001 : init-shut
0x0002 : mgmt
0x0004 : …
Integer32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.4
fsLsppAgeOutTime
This object specifies the amount of time after which a
ping or traceroute entry should get deleted, after the operation
is completed. The actual time duration after which the entry
will get deleted will be determined …
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.5
fsLsppAgeOutTmrUnit
This object indicates the time unit for the age out timer as
defined by the fsLsppAgeOutTime object.
FsLsppTimeUnitr/w
Type Values:
1milliseconds
2seconds
3minutes
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.6
fsLsppClearEchoStats
This object is to clear all the global statistics parameters.
Setting this object to TRUE will cause all the statistics to be
reset and setting this object to FALSE will have no effect.
A Get operation on this object wi…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.7
fsLsppBfdBtStrapRespReq
This object is used to indicate the responder whether the echo
reply is required for bfd bootstrapped echo request. By default
this object will be TRUE which specifies that the responder
should reply for the bootstra…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.8
fsLsppBfdBtStrapAgeOutTime
This object specifies the amount of time after which a
ping entry that is created on receiving a Bfd boostrap,
should get deleted. The actual time duration after which the entry
will get deleted will be determined by…
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.9
fsLsppBfdBtStrapAgeOutTmrUnit
This object indicates the time unit for the Bfd boostrap age out
timer as defined by the fsLsppBfdBtStrapAgeOutTime object.
FsLsppTimeUnitr/w
Type Values:
1milliseconds
2seconds
3minutes
 .1.3.6.1.4.1.10876.101.1.13.11.1.1.1.10

fsLsppGlobalStatsTable

table
.1.3.6.1.4.1.10876.101.1.13.11.1.2 · 1 row entry · 24 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsLsppGlobalStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-LSP-PING-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LSP-PING-MIB::fsLsppGlobalStatsTable' 
This table contains statistics information for LSP Ping module.
fsLsppGlobalStatsTableEntry row .1.3.6.1.4.1.10876.101.1.13.11.1.2.1
LSP Ping Statistics table entry. This table will have an entry per
virtual context
Indexes
Column Syntax OID
fsLsppGlbStatReqTx
This object records the number of times echo request packets that
have been sent by this system
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.1
fsLsppGlbStatReqRx
This object records the total number of echo request packets that
have been received by this system.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.2
fsLsppGlbStatReqTimedOut
This object records the number of echo requests that do not receive
any reply within the timeout interval
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.3
fsLsppGlbStatReqUnSent
This object records the total number of echo request packets that
were unable to be sent out of this system.
Eg: This object will get incremented if the ping or traceroute
operation is triggered a…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.4
fsLsppGlbStatReplyTx
This object records the number of times echo reply packets that
have been sent by this system
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.5
fsLsppGlbStatReplyRx
This object records the total number of echo reply packets that
have been received by this system.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.6
fsLsppGlbStatReplyDropped
This object records the total number of received echo replies that
were dropped due to errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.7
fsLsppGlbStatReplyUnSent
This object records the total number of echo reply packets that
were unable to be sent out of this system.
Eg: This object will get incremented when the reply cannot be
sent due to some issues in identifying the retur…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.8
fsLsppGlbStatReplyFromEgr
This object records the number of echo replies received successfully
within the timeout interval for the sent echo requests.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.9
fsLsppGlbStatUnLbldOutIf
This object records the number of echo replies that have been
received by this system with return code 9, which indicates no MPLS
forwarding after the replying router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.10
fsLsppGlbStatDsMapMismatch
This object records the number of echo replies that have been
received by this system with return code 5, which indicates the
mismatch during Downstream Mapping validation.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.11
fsLsppGlbStatFecLblMismatch
This object records the number of echo replies that have been
received by this system with return code 10, which indicates the
mismatch between the label and the FEC in the Target FEC Stack TLV
of the request.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.12
fsLsppGlbStatNoFecMapping
This object records the number of echo replies that have been
received by this system with return code 4, when the replying
router has no mapping for FEC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.13
fsLsppGlbStatUnKUpstreamIf
This object records the number of echo replies that have been
received by this system with return code 6, when the replying router
does not know the upstream interface index.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.14
fsLsppGlbStatReqLblSwitched
This object records the number of echo replies that have been
received by this system with return code 8, which indicates that the
request will be label switched at the replying node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.15
fsLsppGlbStatReqUnSupptdTlv
This object records the number of echo replies that have been
received by this system with return code 2, indicates one or more
TLV present in the request were not understood
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.16
fsLsppGlbStatMalformedReq
This object records the number of echo replies that have been
received by this system with return code 1, indicates that the request
sent was malformed
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.17
fsLsppGlbStatNoLblEntry
This object records the number of echo replies that have been
received by this system with return code 11, which indicates that,
there is no corresponding label entry in the database for the label in
the received reque…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.18
fsLsppGlbStatPreTermReq
This object records the number of echo replies that have been
received by this system with return code 13, indicates the Premature
termination of ping due to label stack shrinking to a single label
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.19
fsLsppGlbStatProtMismatch
This object records the number of echo replies that have been
received by this system with return code 12, indicates that the
Protocol not associated with the received interface for the FEC in the
Target FEC Stack TLV
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.20
fsLsppGlbStatRsvdRetCode
This object records the number of echo replies that have been
received by this system with return code 7, which is a reserved
return code
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.21
fsLsppGlbStatNoRetCode
This object records the number of echo replies that have been
received by this system with return code 0. i.e no return code
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.22
fsLsppGlbStatUndefRetCode
This object records the number of echo replies that have been
received by this system with return code greater than 13 which is
a undefined return code
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.23
fsLsppGlbStatInvalidPktDropped
This object records the number of received packets dropped by LSPP
module when any of the following condition occurs.
1. Packet is received in invalid context.
2. Module is shutdown in the received context.
3. CC and CV…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.1.2.1.24

fsLsppPingTraceTable

table
.1.3.6.1.4.1.10876.101.1.13.11.2.1 · 1 row entry · 51 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsLsppPingTraceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-LSP-PING-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LSP-PING-MIB::fsLsppPingTraceTable' 
Lsp Ping Instance table. 
Each row in this table represent a ping or traceroute entry.
fsLsppPingTraceTableEntry row .1.3.6.1.4.1.10876.101.1.13.11.2.1.1
Ping or Traceroute Entry.
Indexes
Column Syntax OID
fsLsppSenderHandle
Unique handle that identifies a LSP ping or traceroute request.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.1
fsLsppRequestType
This object indicates whether the request is ping or traceroute.
Enumerationr/w
Enumerated Values:
1ping
2traceRoute
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.2
fsLsppRequestOwner
This object specifies the initiator of this ping or traceroute
request.

management - indicates that the request is initiated from
SNMP/CLI/WEB.
bfd - inidicates that the reque…
Enumeration
Enumerated Values:
1management
2bfd
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.3
fsLsppPathType
This object identifies the type of path being monitored.

ldpipv4 or ldpipv6 - indicates that the path pointer is pointing
to a row in FTN table
rsvpipv4 or rsvpipv6 - indicates …
Enumerationr/w
Enumerated Values:
1ldpIpv4
2ldpIpv6
3rsvpIpv4
4rsvpIpv6
5fec128Pw
6fec129Pw
7mep
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.4
fsLsppPathPointer
This object should be interpreted along with the object
fsLsppPathType. This object points to the correponding path details.

If fsLsppPathType is ldpipv4(1) or ldpipv6(2), then this object MUST
contain …
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.5
fsLsppTgtMipGlobalId
This object specifies the Global Id of the Target for which ping
has to be initiated. This must be configured in conjunction with
the fsLsppPathType object being set to MEP and the
fsLsppPathPointer pointing to a Sourc…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.6
fsLsppTgtMipNodeId
This object specifies the Node Id of the Target for which ping has to
be initiated. This must be interpreted in conjunction with the
fsLsppTgtMipGlobalId object.

This object must be set only on performi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.7
fsLsppTgtMipIfNum
This object specifies the Interface Number of the Target for
which ping has to be initiated. This must be interpreted in
conjunction with the fsLsppTgtMipGlobalId and the fsLsppTgtMipNodeId
objects.

Th…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.8
fsLsppReplyMode
This object species the reply mode for this particular echo request.
1 - do not reply
2 - reply via an IPv4/IPv6 UDP packet
3 - reply via an IPv4/IPv6 UDP packet with Router Alert
4 - reply via application level control…
Enumerationr/w
Enumerated Values:
1noReply
2ip
3ipRouterAlert
4controlChannel
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.9
fsLsppRepeatCount
This object represents the number of request packets that has to be
sent in a single ping operation. When the fsLsppRequestOwner is set
to 'bfd', the repeat count will be implicitly considered as one.
…
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.10
fsLsppPacketSize
This object specifies the size of the LSP Ping packet along with
the MPLS label stack imposed that is to be sent. Depending on the
value to which the packet size is set, the PAD TLV will be added
to achieve the speci…
Unsigned32r/w
Constraints:
range: 40-18024
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.11
fsLsppPadPattern
This object specifies the pattern to be used in PAD TLV.
This pattern may be repeated in the PAD TLV depending upon the
length of the pattern and the length of the PAD TLV.
This configuration is optional.
…
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.12
fsLsppTTLValue
This object specifies a time to live value.
In case of ping, by default TTL value will be 255.

If the user sets a particular value, then that TTL will be set and
carried in the echo packets.
…
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.13
fsLsppWFRInterval
Specifies the amount of time to wait to receive a response for a
transmitted MPLS echo request packet before timing out the request.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.14
fsLsppWFRTmrUnit
This object indicates the time unit for the wait-for-reply timer.
FsLsppTimeUnitr/w
Type Values:
1milliseconds
2seconds
3minutes
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.15
fsLsppWTSInterval
This object specifies the time between two successive MPLS echo
requests transmitted. This allows the user to pace the transmission
of packets so that the receiving router does not drop packets.

This ob…
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.16
fsLsppWTSTmrUnit
This object indicates the time unit for the wait-to-send timer.
FsLsppTimeUnitr/w
Type Values:
1milliseconds
2seconds
3minutes
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.17
fsLsppReplyDscpValue
This object is to insist on the replying router to provide a
specific class of service (CoS) in an echo reply.

In IP/MPLS and MPLS-TP environments where IP forwarding is possible,
this value can be set.…
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.18
fsLsppSweepOption
This object specifies if a number of packets of different sizes,
ranging from a start size to an end size are to be sent.
Setting this object to TRUE enables the sweep option.

This object alone doe…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.19
fsLsppSweepMinimum
This object specifies the minimum or start size of the echo request
packet with which the initiator should send the requests.

The value set in this object will be used when the fsLsppSweepOption
ob…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.20
fsLsppSweepMaximum
This object specifies the end size of the echo request packet.

The value set in this object will be used when the fsLsppSweepOption
object is set to True.

This object alone does not have …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.21
fsLsppSweepIncrement
This option specifies size by which echo packet size should be
incremented compared to previous echo request.

The value set in this object will be used when the fsLsppSweepOption
object is set to Tr…
Unsigned32r/w
Constraints:
range: 10-1000
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.22
fsLsppBurstOption
This object provides an option to send a burst of echo request
packets of the specified burst size.
Setting this value to True causes the burst option to be enabled.
This object is not applicable and should not be set…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.23
fsLsppBurstSize
This object specifies the number of echo packets that needs to be
sent in a burst.

This object is applicable only if the fsLsppBurstOption object is
set to true.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.24
fsLsppEXPValue
This object specifies the MPLS experimental field (traffic class
field) value that should be set in the MPLS header for the MPLS
echo packets.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.25
fsLsppDsMap
This option is to interrogate a transit router for downstream
mapping (DSMAP) information.
In case of ping, this option is False by default.
For Traceroute this object is implicitly set to True and setting
this objec…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.26
fsLsppFecValidate
Setting this object makes the Forward Equivalence Class (FEC)
validation, or in other words, the control versus data plane
verification, to be performed at the responder.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.27
fsLsppReplyPadTlv
If this object is true, this gives an indication to the responder
to copy the pad tlv in the reply packet.

By default it is set to false.

PAD TLV will be added in the reply only if th…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.28
fsLsppForceExplicitNull
If this object is set to true, EXPLICIT NULL label will be added
at the bottom of the MPLS Label Stack.

This addition of Explicit NULL in the Label Stack allows LSP ping
to be used to detect breakages o…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.29
fsLsppInterfaceLabelTlv
If this object is set to true, this gives an indication to the
responder to add the Interface and Label Stack TLV in the echo
reply packet.

This can be set to true only when fsLsppDsMap is set to true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.30
fsLsppSameSeqNumOption
If this object is set to true, all the echo request packets as as
indicated by the repeat count, are sent with the same sequence
number.
This object is not applicable for traceroute operation.

This obj…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.31
fsLsppVerbose
If this object is set, the originator of the echo request displays
the MPLS echo reply sender address,sequence number, return codes
and return sub-code for every packet in that ping instance as
received from the resp…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.32
fsLsppReversePathVerify
If this object is set to true, the reverse path of an LSP
on which the echo reply is sent, will also be verified.

This should be set only when monitoring MPLS-TP bidirectional paths.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.33
fsLsppEncapType
This object specifies the encapsulation type of the LSP Ping packets.
In case of MPLS LSP/Tunnel, the encapsulation type should be set to
mplsIp. For MPLS-TP LSP/Tunnel any one of the following types:
mplsIp, mplsAch …
Enumerationr/w
Enumerated Values:
1mplsIp
2mplsAch
3mplsAchIp
4vccvNegotiated
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.34
fsLsppStatus
This object indicates the current status of the Ping operation.

inprogress(1) - Operation in progess.
success(2) - Echo reply received successfully
for all the echo packets of th…
Enumeration
Enumerated Values:
1inProgress
2success
3failure
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.35
fsLsppActualHopCount
If this entry corresponds to a trace route operation and if it is
successful, this object indicates the hopcount to reach to egress
node.
If the trace route operation has failed, then this count indicates
the node ti…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.36
fsLsppResponderAddrType
This object specifies whether the address of the sender of the
echo reply packets. This object contains the IPv4 or IPv6 address
type of the replying router in IP/MPLS and MPLS-TP networks when IP
addressing is suppo…
FsLsppAddressType
Type Values:
0notApplicable
1ipv4Numbered
2ipv4UnNumbered
3ipv6Numbered
4ipv6UnNumbered
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.37
fsLsppResponderAddr
This object contains the IP address of the replying router in
IP/MPLS and MPLS-TP networks when IP addressing is supported.
This object will contain the Node ID of the responder in case of
a non-IP based MPLS-TP envi…
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.38
fsLsppResponderGlobalId
This object contains the Global ID of the replying router in
MPLS-TP environments.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.39
fsLsppResponderId
This object contains the Node ID of the replying router in the
MPLS-TP environment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.40
fsLsppMaxRtt
This object contains the maximum round-trip time taken for a
successful echo reply for this ping instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.41
fsLsppMinRtt
This object contains the minimum round-trip time taken for a
successful echo reply for this ping instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.42
fsLsppAverageRtt
This object contains the average round-trip time taken for a
successful echo reply for this ping instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.43
fsLsppPktsTx
This object indicates the total number of echo requests that has
been transmitted for this ping or trace route instance.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.44
fsLsppPktsRx
This object indicates the total number of echo replies that has been
recieved for this ping or trace route instance.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.45
fsLsppPktsUnSent
This object indicates the total number of echo packets that has been
unsent due to some issues or errors in framing the packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.46
fsLsppRowStatus
This object provides control over the status of this entry.
Setting this object to 'createAndGo' or to 'notInService' is
disallowed.
Setting this object to 'destroy' is valid only if this entry is no
longer reference…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.47
fsLsppStatusPathDirection
This object specifies the direction for which the echo status
is applicable. This object should be interpreted in conjunction
with fsLsppStatus object.

When fsLsppReversePathVerify Object is not set, th…
Enumeration
Enumerated Values:
1forward
2reverse
3both
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.48
fsLsppResponderIcc
This object contains the ICC (ITU Carrier Code) of the replying
router in an ICC based MPLS-TP network. This object is not applicable
for IP based MPLS-TP networks
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.49
fsLsppResponderUMC
This object contains the UMC(Unique MEG code) of the replying
router in an ICC based MPLS-TP network. This object is not applicable
for IP based MPLS-TP networks.
OctetString
Constraints:
range: 1-7
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.50
fsLsppResponderMepIndex
This object contains the administratively assigned Mep Index
of the replying router in ICC based MPLS-TP network.
This object is not applicable for IP based MPLS-TP network.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.1.1.51

fsLsppEchoSequenceTable

table
.1.3.6.1.4.1.10876.101.1.13.11.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsLsppEchoSequenceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-LSP-PING-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LSP-PING-MIB::fsLsppEchoSequenceTable' 
This table contains detailed information about each 
response received for every request sent.
fsLsppEchoSequenceTableEntry row .1.3.6.1.4.1.10876.101.1.13.11.2.2.1
An entry in this table represents an echo request sent with a
particular sequence number.

For every Sender's Handle fsLsppSenderHandle in the
fsLsppPingTraceTable, there will be one entry for each of the…
Indexes
Column Syntax OID
fsLsppSequenceNumber
For each echo request belonging to a single ping or trace route
instance as indicated by the Sender's Handle fsLsppSenderHandle in
the fsLsppPingTraceTable, this object denotes the Sequence number
of the request pack…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.2.1.1
fsLsppReturnCode
This object indicates the return code received in the response
packet with this sequence number.
Return code can have a value ranging from 0 to 13.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.2.1.2
fsLsppReturnSubCode
This object indicates the return sub code received in the response
packet with this sequence number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.2.1.3
fsLsppReturnCodeStr
This object contains a string which mentions the meaning for the
return code along with the return subcode

Return code Meaning
------ ---- -------
0 No r…
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.10876.101.1.13.11.2.2.1.4

fsLsppHopTable

table
.1.3.6.1.4.1.10876.101.1.13.11.2.3 · 1 row entry · 26 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsLsppHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-LSP-PING-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LSP-PING-MIB::fsLsppHopTable' 
This table contains information about the transit nodes in the
path on which the echo request is sent. This table is populated
for both ping and trace route operations.
fsLsppHopTableEntry row .1.3.6.1.4.1.10876.101.1.13.11.2.3.1
An entry in this table contains information about a Transit node
and its Downstream node's information.
For every Sender's Handle fsLsppSenderHandle in the
fsLsppPingTraceTable pertaining to a trace route operation,
t…
Indexes
Column Syntax OID
fsLsppHopIndex
The Hop Index contains the index to uniquely identify each
transit node in a traced path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.1
fsLsppHopAddrType
This object specifies the type of address of the replying
transit router.

In IP/MPLS environments, the value of this object
can be either 'ipv4 numbered' or 'ipv6 numbered'. In MPLS-TP
environments, it…
FsLsppAddressType
Type Values:
0notApplicable
1ipv4Numbered
2ipv4UnNumbered
3ipv6Numbered
4ipv6UnNumbered
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.2
fsLsppHopAddr
This object specifies the address of the replying transit router
as per the type specified by the fsLsppHopAddrType object.

This object will contain ipv4 or ipv6 address in IP/MPLS
environment. In MPLS-T…
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.3
fsLsppHopGlobalId
This object contains the Global ID of the transit replying node
in MPLS-TP networks.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.4
fsLsppHopId
This object specifies the Node ID of the transit replying node
in MPLS-TP networks. The Node ID can be IPv4 loopback address or
a 32-bit unsigned integer value when IP addressing is not
supported.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.5
fsLsppHopIfNum
This object contains the Interface number of the transit replying
node in MPLS-TP network.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.6
fsLsppHopReturnCode
This object indicates the return code received in the response
packet from this transit node.
Return code can have a value ranging from 0 to 13.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.7
fsLsppHopReturnSubCode
This object indicates the return sub code received in the response
packet from this transit node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.8
fsLsppHopReturnCodeStr
The object contains a string which provides the meaning for the
return code along with the return subcode. The list of strings
are the same as those supported by the fsLsppReturnCodeStr
object.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.9
fsLsppHopRxAddrType
This object specifies the type of the address of the interface
receiving the trace route request packet on the transit node.
FsLsppAddressType
Type Values:
0notApplicable
1ipv4Numbered
2ipv4UnNumbered
3ipv6Numbered
4ipv6UnNumbered
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.10
fsLsppHopRxIPAddr
This object specifies the router address of the transit node or
the interface address on which the echo request was received by
the transit router. The type of address will be based on the
value in the fsLsppHopRxAddr…
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.11
fsLsppHopRxIfAddr
This object specifies the interface address on which the echo
request received by the replying router. The type of address will
be based on the value in fsLsppHopRxAddrType.
This object is not applicable for Un-Number…
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.12
fsLsppHopRxIfNum
This object contains the interface Index of the replying
router on which the echo request was received.

This object is applicable in case of Un-Numbered Interfaces.
This object takes the value 0 on interf…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.13
fsLsppHopRxLabelStack
This object contains the label stack that was on the echo request
packet when it was received by the replying transit router. The
labels in the stack will be delimited by slash('/').
For example, 20/10/25
OctetString .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.14
fsLsppHopRxLabelExp
This object contains the EXP values of the labels in the received
Interface and Label Stack TLV, which are the EXP values in the
labels with which the transit router received the echo request.
The EXP values in the st…
OctetString .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.15
fsLsppHopRtt
This object contains the round-trip time taken to this hop,
which is the total time taken for the request packet to be sent
to this transit node and the reply packet to be received from it.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.16
fsLsppHopDsMtu
This object specifies the maximum transmission unit on the
Downstream interface of this trasnit node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.17
fsLsppHopDsAddrType
This object specifies the type of the address of the Downstream
Node for this transit node.
FsLsppAddressType
Type Values:
0notApplicable
1ipv4Numbered
2ipv4UnNumbered
3ipv6Numbered
4ipv6UnNumbered
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.18
fsLsppHopDsIPAddr
This object contains the IP address of the Downstream Node for
this transit router based on the value of fsLsppHopDsAddrType.
This object will not contain any value when IP addressing is not
used in MPLS-TP environmen…
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.19
fsLsppHopDsIfAddr
This object specifies the interface address of the Downstream
Node of this transit router, over which the echo request packet
would be forwarded for by this transit router for the path being
traced.
This object is not …
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.20
fsLsppHopDsIfNum
This object contains the interface Index of the Downstream
Node of this transit router, over which the echo request packet
would be forwarded for by this transit router for the path being
traced.
This object is applicab…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.21
fsLsppHopDsLabelStack
This object contains the set of labels in the label stack as it
would have appeared if this transit router were forwarding the
packet through the interface to its Downstream router. The labels
in the stack will be del…
OctetString .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.22
fsLsppHopDsLabelExp
This object contains the EXP values of the labels in the received
label stack in Downstream Mapping TLV, which are the EXP values
this transit router would use if it were forwarding the packet
through the interface to …
OctetString .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.23
fsLsppHopIcc
This object specifies the ICC(ITU Carrier Code) of the
transit replying node in ICC based MPLS-TP network.
This is not applicable in IP based MPLS-TP network.
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.24
fsLsppHopUMC
This object specifies the UMC(Unique MEG code) of the
transit replying node in ICC based MPLS-TP network.
This is not applicable in IP based MPLS-TP network.
OctetString
Constraints:
range: 1-7
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.25
fsLsppHopMepIndex
This object specifies the administratively assigned Mep Index
of the transit replying node in ICC based MPLS-TP network.
This is not applicable in IP based MPLS-TP network.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.11.2.3.1.26