SUPERMICRO-LDP-TEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
8

fsLdpTcpConnectionTable

table
.1.3.6.1.4.1.10876.101.1.13.14.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsLdpTcpConnectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-LDP-TEST-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LDP-TEST-MIB::fsLdpTcpConnectionTable' 
This table represents a test TCP connection.
fsLdpTcpConnectionEntry row .1.3.6.1.4.1.10876.101.1.13.14.1.1.1
An entry in this table denotes a TCP Connection.
A new test TCP connection can be created for sending invalid /
incorrect / malformed TCP packets. This entry do not setup
LDP session. This entry only initiates TCP con…
Indexes
Column Syntax OID
fsLdpTcpConnectionId
This object uniquely identifies the TCP Connection Entry.
Unsigned32
Constraints:
range: 1-256
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.1
fsLdpTcpDestIpAddress
This object is used to set the Destination IP Address of the TCP
Connection. This object needs to be set mandatorily for setting up
LDP Connection.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.2
fsLdpTcpSourceIpAddress
This object is used to set the Source IP Address of the TCP
Connection. This object can be set optionally. If this object is set,
the value mentioned in this object is used as the Source IP address for
setting up LDP Co…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.3
fsLdpTcpDestPort
This object is used to set the TCP Destination Port of the TCP
Connection. This object can be optionally set. If this object is set,
the value mentioned in this object is used as the Destination TCP Port
for setting up …
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.4
fsLdpTcpSourcePort
This object is used to set the TCP Destination Port of the TCP
Connection. This object can be optionally set. If this object is set,
the value mentioned in this object is used as the source TCP port for
setting up TCP …
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.5
fsLdpTcpPacketTxValue
This object is used to set the packet payload which is to be sent
over the TCP connection. This object can be set even if
fsLdpTcpConnectionRowStatus is active. When this object is set,
the TCP packet is sent out immed…
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.6
fsLdpTcpConnectionRowStatus
This object is used to set create, activate or destroy the TCP connection.
The possible values that can be set for this object are createAndWait (5),
Active (1) and Destroy (6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.7
fsLdpTcpVrfName
VRF name of the interface where the TCP connection is established.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.10876.101.1.13.14.1.1.1.8