SUPERMICRO-L2VPN-MIB Table View

This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).

vplsConfigEntry row .1.3.6.1.4.1.10876.101.2.72.1.2.1

A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row is created by the operator or by the …

Indexes

vplsConfigIndex

Column	Syntax	OID
vplsConfigIndex Unique index for the conceptual row identifying a VPLS service.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.2.72.1.2.1.1
vplsConfigName A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.2.72.1.2.1.2
vplsConfigDescr A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length octet string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.2.72.1.2.1.3
vplsConfigAdminStatus The desired administrative state of the VPLS service. If the administrative status of the Vpls service is changed to enable then this service is able to utilize the pseudo wire to perform the tasks of a VPLS service. Th…	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.10876.101.2.72.1.2.1.4
vplsConfigMacLearning This object specifies if MAC Learning is enabled in this service. If this object is true then Mac Learning is enabled. If false, then Mac Learning is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.72.1.2.1.6
vplsConfigDiscardUnknownDest If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are processed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.72.1.2.1.7
vplsConfigMacAging If the value of this object is 'true' then the MAC ageing process is enabled in this VPLS. If 'false', then the MAC ageing process is disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.72.1.2.1.8
vplsConfigFwdFullHighWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent.	percentageUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.10876.101.2.72.1.2.1.10
vplsConfigFwdFullLowWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent.	percentageUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.10876.101.2.72.1.2.1.11
vplsConfigRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.72.1.2.1.12
vplsConfigMtu The value of this object specifies the MTU of this vpls instance.	Unsigned32r/w Constraints: range: 64-1518	.1.3.6.1.4.1.10876.101.2.72.1.2.1.13
vplsConfigVpnId This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service.	VPNIdOrZero Type Constraints: range: 0 range: 7	.1.3.6.1.4.1.10876.101.2.72.1.2.1.14
vplsConfigServiceType The value of this object specifies the type of service emulated by this vpls instance.	Enumerationr/w Enumerated Values: 1 vlan 2 ethernet	.1.3.6.1.4.1.10876.101.2.72.1.2.1.15
vplsConfigStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.10876.101.2.72.1.2.1.16

This table provides information for monitoring
Virtual Private Lan Services(VPLS).

vplsStatusEntry row .1.3.6.1.4.1.10876.101.2.72.1.3.1

A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row in this table is automatically create…

Indexes

vplsConfigIndex

Column	Syntax	OID
vplsStatusOperStatus The current operational state of this VPLS Service.	Enumeration Enumerated Values: 0 other 1 up 2 down	.1.3.6.1.4.1.10876.101.2.72.1.3.1.1
vplsStatusPeerCount This objects specifies the number of peers present in this vpls instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.1.3.1.2

This table provides an association between a
VPLS service and the corresponding Pseudo
Wires. A service can have more than one Pseudo
Wire association. Pseudo Wires are defined in
the pwTable

vplsPwBindEntry row .1.3.6.1.4.1.10876.101.2.72.1.4.1

Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the …

Indexes

vplsConfigIndex PW-STD-MIBpwIndex

Column	Syntax	OID
vplsPwBindConfigType The value of this object indicates whether the Pseudo Wire binding was created manually or via autodiscovery. The value of this object must be specifed when the row is created and cannot be changed while …	Enumerationr/w Enumerated Values: 1 manual 2 autodiscovery	.1.3.6.1.4.1.10876.101.2.72.1.4.1.1
vplsPwBindType The value of this object indicates whether the Pseudo Wire binding is of type mesh or spoke. The value of this object must be specifed when the row is created and cannot be changed while the row status is…	Enumerationr/w Enumerated Values: 1 mesh 2 spoke	.1.3.6.1.4.1.10876.101.2.72.1.4.1.2
vplsPwBindRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.72.1.4.1.3
vplsPwBindStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.10876.101.2.72.1.4.1.4

This table specifies information for configuring
BGP Auto-discovery parameters for a given Vpls service.

vplsBgpADConfigEntry row .1.3.6.1.4.1.10876.101.2.72.1.5.1

A row in this table represents BGP based autodiscovery
is in use for this instance of Vpls.
A row in this table is indexed by vplsConfigIndex, which
uniquely identifies a single VPLS.
None of the read-create objects can…

Indexes

vplsConfigIndex

Column	Syntax	OID
vplsBgpADConfigRouteDistinguisher The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. for more details on use of a route distinguisher for a VPLS service, see [RFC4761]	VplsBgpRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.10876.101.2.72.1.5.1.1
vplsBgpADConfigPrefix In case of auto-discovery the default prefix advertised is the ip address of the loopback. In case the user wants to override the loopback address, vplsBgpADConfigPrefix should be set. When this value if non-zero it is …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.1.5.1.2
vplsBgpADConfigVplsId VplsId is a unique identifier for all VSIs belonging to the same VPLS. It is advertised as an extended community	VplsBgpRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.10876.101.2.72.1.5.1.3
vplsBgpADConfigRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.72.1.5.1.4

This table specifies the list of Route Targets
imported or exported by BGP during auto-discovery of VPLS.

vplsBgpRteTargetEntry row .1.3.6.1.4.1.10876.101.2.72.1.6.1

An entry in this table specifies the value of the
Route Target being used by BGP. Depending on the value
of vplsBgpRteTargetType an RT might be exported or
imported or both. Every VPLS which
uses auto-discovery for find…

Indexes

vplsConfigIndex vplsBgpRteTargetIndex

Column	Syntax	OID
vplsBgpRteTargetIndex This index along with vplsConfigIndex,identifies one entry in the vplsBgpRteTargetTable. By keeping vplsConfigIndex constant and using new value of vplsBgpRteTargetIndex user can configure multiple Route Targets for th…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.1.6.1.1
vplsBgpRteTargetRTType Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364].	VplsBgpRouteTargetTyper/w Type Values: 1 import 2 export 3 both	.1.3.6.1.4.1.10876.101.2.72.1.6.1.2
vplsBgpRteTargetRT The route target associated with the VPLS service. For more details on use of route targets for a VPLS service, see [RFC4761]	VplsBgpRouteTargetr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.10876.101.2.72.1.6.1.3
vplsBgpRteTargetRTRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.72.1.6.1.4

The PW Redundancy Group table for pseudo-wire. Each entry in this
table corresponds to a configured Redundancy Group. This table
contains the group specific attributes. The entry in this table
are derived in reference from the (draft draft-ietf-pwe3-redundancy-07
& draft-ietf-pwe3-redundancy-bit-07).

fsL2VpnPwRedGroupEntry row .1.3.6.1.4.1.10876.101.2.72.4.1.1

The PW Redundancy Group table entry. This table allows the user to
configure the Redundancy Group related parameters. Once the redundancy
entries are created then the pseudo-wires can be associated to each
Group. The sw…

Indexes

fsL2VpnPwRedGroupIndex

Column	Syntax	OID
fsL2VpnPwRedGroupIndex The unique identifier for the pseudowire redundancy protection group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.4.1.1.1
fsL2VpnPwRedGroupProtType This object is used to indicate the protection architecture type of the redundancy group. Protection architecture types supported are give below: - 'onePlusOneWithLdp(1),provides 1+1 support for the pseud…	Enumerationr/w Enumerated Values: 1 onePlusOne 2 oneIsToOne 3 oneIsToN	.1.3.6.1.4.1.10876.101.2.72.4.1.1.2
fsL2VpnPwRedGroupReversionType This object is used to indicate the operation type/mode of the protection group entry. If the value is set to 'revertive(1)', then normal traffic will be shifted from the protection entity back to the working entity upo…	Enumerationr/w Enumerated Values: 1 revertive 2 nonRevertive	.1.3.6.1.4.1.10876.101.2.72.4.1.1.3
fsL2VpnPwRedGroupContentionResolutionMethod This object is used to indicate the mode of operation of the pseudo-wire group. If the mode is configured as independent then the PW endpoint nodes independently select which PW they intend to make active and which PWs …	Enumerationr/w Enumerated Values: 1 independent 2 masterslave	.1.3.6.1.4.1.10876.101.2.72.4.1.1.4
fsL2VpnPwRedGroupMasterSlaveMode This value is applicable only if the fsL2VpnPwRedGroupContentionResolutionMethod is selected as 'masterSlave'. Then the user can specify if this group is acting as Master or Slave. When the Redundancy Group is configure…	Enumerationr/w Enumerated Values: 1 master 2 slave	.1.3.6.1.4.1.10876.101.2.72.4.1.1.5
fsL2VpnPwRedGroupDualHomeApps Enables the reflection of the attachment circuit status onto both the primary and secondary pseudowires. This condition is necessary if the peer PEs are connected to a dual-homed device	Bitsr/w Enumerated Values: 0 lagg	.1.3.6.1.4.1.10876.101.2.72.4.1.1.6
fsL2VpnPwRedGroupName The name given to the protection group entry. This object is used to refer the protection group in addition to the protection group Id. The default value for this object will be the null string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.10876.101.2.72.4.1.1.7
fsL2VpnPwRedGroupStatus This parameter indicate the current status of the PW Redundancy Group.	Bits Enumerated Values: 0 forwardingNegotiaton 1 switchoverNegotiaton 2 negotiatonSuccess 3 waitingToRestore 4 redundancyUnAvailable	.1.3.6.1.4.1.10876.101.2.72.4.1.1.8
fsL2VpnPwRedGroupOperActivePw This object is used for indicating the pseudo-wire which is currently active in a PW Redundancy Group. This parameter will contain reference to a valid pwEntry when one of the local PW is forwarding the user traffic. …	PW-TC-STD-MIBPwIndexOrZeroType Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.4.1.1.9
fsL2VpnPwRedGroupWtrTimer This column is used to configure the wait-to-restore timer for the pseudowire redundancy group. This column is used to configure the wait-to-restore timer for the the revertive mode of operation. In the n…	Unsigned32r/w Constraints: range: 1-180	.1.3.6.1.4.1.10876.101.2.72.4.1.1.10
fsL2VpnPwRedGroupAdminCmd This column is used by the operator to perform some administrative operation. The operator requests a command by writing the command value to this column.The action for the command issued may or maynot happen depending…	Enumerationr/w Enumerated Values: 1 lockOutProtection 2 clear	.1.3.6.1.4.1.10876.101.2.72.4.1.1.11
fsL2VpnPwRedGroupAdminActivePw This object is used by the operator to forcefully switchover the traffic to the specified pseudowire. This operation may or may-not succeed depending on the redundancy state machine. Also if this value is set, when the …	PW-TC-STD-MIBPwIndexOrZeroTyper/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.4.1.1.12
fsL2VpnPwRedGroupAdminCmdStatus This column indicates the status of the most recent administrative command issued to this protection group through the fsL2VpnPwRedGroupAdminCmd object.	Enumeration Enumerated Values: 1 accepted 2 notApplicable 3 rejected	.1.3.6.1.4.1.10876.101.2.72.4.1.1.13
fsL2VpnPwRedGroupRowStatus This object defines the status of this row. The valid option supported for this table are 'createAndGo' and 'destroy'.Entries in this table cannot be modified by the user when the row is active	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.72.4.1.1.14

List of sibling PE nodes in PW Redundancy Group. For each node
corresponding TLDP entity also has to be created in
MPLS-LDP-STD-MIB::mplsLdpEntityTable.

fsL2VpnPwRedNodeEntry row .1.3.6.1.4.1.10876.101.2.72.4.2.1

Information about a sibling PE node participating the same PW
Redundancy Group.

Indexes

fsL2VpnPwRedGroupIndex fsL2VpnPwRedNodeAddrType fsL2VpnPwRedNodeAddr

Column	Syntax	OID
fsL2VpnPwRedNodeAddrType The type of the internetwork layer address used for ICCP handshaking. This object indicates how the value of fsL2VpnPwRedNodeAddr is to be interpreted. This parameter will be same as MPLS-LDP-STD-MIB::mplsLdpEntityTarge…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.72.4.2.1.1
fsL2VpnPwRedNodeAddr The value of the internetwork layer address used for the ICCP handshaking. The value of fsL2VpnPwRedNodeAddrType specifies how this address is to be interpreted. This parameter will be same as MPLS-LDP-STD-MIB::mplsLdpE…	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.10876.101.2.72.4.2.1.2
fsL2VpnPwRedNodeLocalLdpID This read-only parameter indicates the currently used LDP session for ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.10876.101.2.72.4.2.1.3
fsL2VpnPwRedNodeLocalLdpEntityIndex This read-only parameter indicates the currently used LDP session for ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.4.2.1.4
fsL2VpnPwRedNodePeerLdpID This read-only parameter indicates the currently used LDP session for ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.10876.101.2.72.4.2.1.5
fsL2VpnPwRedNodeStatus This read-only parameter indicates the sibling node status.	Bits Enumerated Values: 0 connected 1 localSync	.1.3.6.1.4.1.10876.101.2.72.4.2.1.6
fsL2VpnPwRedNodeRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.72.4.2.1.7

This tables gives the information of the pseudowires associated with 
a particular redundancy group and allows to modify/remove PWs in the 
group. The switching of active to standby will occur within the
pseudowires that are within the redundancy group.
          
This object is derived based on the drafts
(draft-ietf-pwe3-redundancy-07 & draft-ietf-pwe3-redundancy-bit-07).

fsL2VpnPwRedPwEntry row .1.3.6.1.4.1.10876.101.2.72.4.3.1

This tables allows the user to configure the pseudowire parameters
specific to redundancy group.

Indexes

fsL2VpnPwRedGroupIndex fsL2VpnPwRedPwIndex

Column	Syntax	OID
fsL2VpnPwRedPwIndex The pwIndex of a PW in Redundancy group	PW-TC-STD-MIBPwIndexOrZeroType Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.4.3.1.1
fsL2VpnPwRedPwPreferance The preference of the pseudowire. If the pseudowire is configured as primary it has more chance of becoming active when more than one PW qualify for secondary	Enumerationr/w Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.10876.101.2.72.4.3.1.2
fsL2VpnPwRedPwLocalStatus The pwLocalStatus of the PW including the preferential FORWARDING and SWITCHOVER bit.	FsL2VpnPwStatus Type Values: 0 pwNotForwarding 1 servicePwRxFault 2 servicePwTxFault 3 psnPwRxFault 4 psnPwTxFault 5 pwForwardingStandby 6 pwSwitchoverRequest	.1.3.6.1.4.1.10876.101.2.72.4.3.1.3
fsL2VpnPwRedPwRemoteStatus This object indicates the PFS bit status received from the remote peer via LDP signalling.	FsL2VpnPwStatus Type Values: 0 pwNotForwarding 1 servicePwRxFault 2 servicePwTxFault 3 psnPwRxFault 4 psnPwTxFault 5 pwForwardingStandby 6 pwSwitchoverRequest	.1.3.6.1.4.1.10876.101.2.72.4.3.1.4
fsL2VpnPwRedPwOperStatus This object indicates the PW operational status with the Preferential Forwarding status under consideration. When PFS is indicates status as 'STANDBY' the OPER.STATUS will be 'dormant'.	PW-TC-STD-MIBPwOperStatusTC Type Values: 1 up 2 down 3 testing 4 dormant 5 notPresent 6 lowerLayerDown	.1.3.6.1.4.1.10876.101.2.72.4.3.1.5
fsL2VpnPwRedPwRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.72.4.3.1.6

This tables gives the information of the pseudowires associated with
a particular redundancy group and allows to modify/remove PWs in the
group. The switching of active to standby will occur within the
pseudowires that are within the redundancy group.
          
This object is derived based on the drafts
(draft-ietf-pwe3-redundancy-07 & draft-ietf-pwe3-redundancy-bit-07).

fsL2VpnPwRedIccpPwEntry row .1.3.6.1.4.1.10876.101.2.72.4.4.1

This tables allows the user to configure the pseudowire parameters
specific to redundancy group.

Indexes

fsL2VpnPwRedIccpPwRgIndex fsL2VpnPwRedIccpPwHeadLsr fsL2VpnPwRedIccpPwFecType fsL2VpnPwRedIccpPwTailLsr fsL2VpnPwRedIccpPwGroup fsL2VpnPwRedIccpPwId fsL2VpnPwRedIccpPwAgiType fsL2VpnPwRedIccpPwAgi fsL2VpnPwRedIccpPwLocalAiiType fsL2VpnPwRedIccpPwLocalAii fsL2VpnPwRedIccpPwRemoteAiiType fsL2VpnPwRedIccpPwRemoteAii

Column	Syntax	OID
fsL2VpnPwRedIccpPwRgIndex	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.72.4.4.1.1
fsL2VpnPwRedIccpPwHeadLsr	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.72.4.4.1.2
fsL2VpnPwRedIccpPwFecType	Enumeration Enumerated Values: 1 manual 2 pwIdFecSignaling 3 genFecSignaling	.1.3.6.1.4.1.10876.101.2.72.4.4.1.3
fsL2VpnPwRedIccpPwTailLsr	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.72.4.4.1.4
fsL2VpnPwRedIccpPwGroup	PW-TC-STD-MIBPwGroupID	.1.3.6.1.4.1.10876.101.2.72.4.4.1.5
fsL2VpnPwRedIccpPwId	PW-TC-STD-MIBPwIDType	.1.3.6.1.4.1.10876.101.2.72.4.4.1.6
fsL2VpnPwRedIccpPwAgiType	Enumeration Enumerated Values: 1 type1	.1.3.6.1.4.1.10876.101.2.72.4.4.1.7
fsL2VpnPwRedIccpPwAgi	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.72.4.4.1.8
fsL2VpnPwRedIccpPwLocalAiiType	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.10876.101.2.72.4.4.1.9
fsL2VpnPwRedIccpPwLocalAii	OctetString Constraints: range: 4-12	.1.3.6.1.4.1.10876.101.2.72.4.4.1.10
fsL2VpnPwRedIccpPwRemoteAiiType	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.10876.101.2.72.4.4.1.11
fsL2VpnPwRedIccpPwRemoteAii	OctetString Constraints: range: 4-12	.1.3.6.1.4.1.10876.101.2.72.4.4.1.12
fsL2VpnPwRedIccpPwRoId	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.72.4.4.1.13
fsL2VpnPwRedIccpPwPriority	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.72.4.4.1.14
fsL2VpnPwRedIccpPwStatus	Bits Enumerated Values: 0 localForward 1 localStandby 2 localSwitchover 3 remoteSwitchover 4 remoteAwaited 6 nodeSwitchover 7 localUpdated	.1.3.6.1.4.1.10876.101.2.72.4.4.1.15