SUPERMICRO-IPSECV6-MIB Table View

The list of selectors for the interface.

fsIpv6SecSelectorEntry row .1.3.6.1.4.1.10876.101.1.29.2.1.1

An entry in the Selector Table. Each entry
is a set of IP or Upper layer protocol
fields used by security policy database to
map to security association entry or bundle.

Indexes

fsipv6SelIfIndex fsipv6SelProtoIndex fsipv6SelAccessIndex fsipv6SelPort fsipv6SelPktDirection

Column	Syntax	OID
fsipv6SelIfIndex The index value which uniquely identifies the IPv6 interface on which this Selector Table entry exists. The interface indentified by a particular value of this index is the same interface as identified by the value o…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.1.1.1
fsipv6SelProtoIndex The Proto index value which uniquely identifies the protocol for which this Selector Table entry exists.In case of no specific protocol any can be used whose value is assigned as 9000	Enumeration Enumerated Values: 6 tcp 17 udp 50 espproto 51 ahproto 58 icmpv6 9000 any	.1.3.6.1.4.1.10876.101.1.29.2.1.1.2
fsipv6SelAccessIndex This value of the object is same as that of the index of the access table. This index can be used to get a range of source and destination IPv6 addresses from the access table for validating the src and destination ad…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.1.1.3
fsipv6SelPort Port to Specify the user application for a given protocol.In case of no specific port any can be used whose value is assigned to 9000	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.1.1.4
fsipv6SelPktDirection Decides the Packet Direction	Enumeration Enumerated Values: 1 inbound 2 outbound 3 any	.1.3.6.1.4.1.10876.101.1.29.2.1.1.5
fsipv6SelFilterFlag Flag to specify the filtering of the packets based on the protocol field.	Enumerationr/w Enumerated Values: 1 filter 2 allow	.1.3.6.1.4.1.10876.101.1.29.2.1.1.6
fsipv6SelPolicyIndex The value of this object is same as that of the index of the security policy table. This object can be configured only when there is a corresponding entry for the specified value in the policy table.This object canno…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.1.1.7
fsipv6SelIfIpAddress A unique non-zero value identifying the local tunnel termination address. This object should be set when working with IKE	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.29.2.1.1.8
fsipv6SelStatus This object is used to create and delete rows from the fsipv6SecSelectorTable. It can be set to the value of createAndGo(4),createAndWait(5), notInService(2),active(1) and destroy(6). This object can be configured onl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.29.2.1.1.9

Range of Ip addresses allowed for a domain

fsIpv6SecAccessEntry row .1.3.6.1.4.1.10876.101.1.29.2.2.1

An entry in the access Table that specifies
the range of address allowed for a domain

Indexes

fsipv6SecAccessIndex

Column	Syntax	OID
fsipv6SecAccessIndex This value of the object is used to get a unique entry in the access table. This index is used by the selector table to get an entry from the access table. This index is used to get a range of source IPv6 addresses fr…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.2.1.1
fsipv6SecAccessStatus This object is used to create and delete rows from the fsipv6SecAccessTable. It can be set to the value of createAndGo(4),createAndWait(5), notInService(2),active(1) and destroy(6). This object can be configured only …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.29.2.2.1.2
fsipv6SecSrcNet A unique non-zero value identifying the source IPv6 network for a given access index.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.29.2.2.1.3
fsipv6SecSrcAddrPrefixLen The length of the prefix (in bits) associated with the IPv6 source address of this entry.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.10876.101.1.29.2.2.1.4
fsipv6SecDestNet A unique non-zero value identifying the destination IPv6 network for a given access index.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.29.2.2.1.5
fsipv6SecDestAddrPrefixLen The length of the prefix (in bits) associated with the IPv6 destination address of this entry.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.10876.101.1.29.2.2.1.6

List of policies that determine the disposition
of all IP traffic

fsIpv6SecPolicyEntry row .1.3.6.1.4.1.10876.101.1.29.2.3.1

An entry in the Security Policy Table that
specifies what services are to be offered to
IP datagrams and in what fashion.

Indexes

fsipv6SecPolicyIndex

Column	Syntax	OID
fsipv6SecPolicyIndex A unique non-zero value identifying the particular security policy entry.This index is used by the the selector table to get the policy entry for a given selector entry	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.3.1.1
fsipv6SecPolicyFlag The choices that can be applied on any outbound/inbound datagrams.	Enumerationr/w Enumerated Values: 3 apply 4 bypass	.1.3.6.1.4.1.10876.101.1.29.2.3.1.2
fsipv6SecPolicyMode The mode of creation of security association entries.	Enumerationr/w Enumerated Values: 1 manual 2 automatic	.1.3.6.1.4.1.10876.101.1.29.2.3.1.3
fsipv6SecPolicySaBundle This object is used to associate Security association entries with each policy entry. The Policy entry is mapped to the secassoc entries by specifying the secassoc indicies in the format (1.2.3.4) where (1,2,3,4) are…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.1.29.2.3.1.4
fsipv6SecPolicyOptionsIndex Refers to the IKE Options.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.3.1.5
fsipv6SecPolicyStatus This object is used to create and delete rows from the fsipv6SecPolicyTable. It can be set to the value of createAndGo(4),createAndWait(5), notInService(2),active(1) and destroy(6). This object can be configured only …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.29.2.3.1.6

This table contains the security association 
between a source and destination. It is 
consulted for authentication and Ciphering of 
inbound and outbound datagrams.Datagrams which 
are forwarded by this entity are not authenticated.

fsipv6SecAssocEntry row .1.3.6.1.4.1.10876.101.1.29.2.4.1

An entry in the IPv6 Security Association Table.
Each entry specifies the mapping between a
particular source and destination address. The
entry specifies the authentication algorithm and
key to use, the direction o…

Indexes

fsipv6SecAssocIndex

Column	Syntax	OID
fsipv6SecAssocIndex A unique non-zero value identifying the particular Security Association. This index value is used by the object fsipv6SecPolicySaBundle of the policy table to associate the policy entries to the secassoc entries	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.4.1.1
fsipv6SecAssocDstAddr This destination address is matched with the destination address in the packet during authentication of inbound and outbound datagrams.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.29.2.4.1.2
fsipv6SecAssocProtocol Security header used for either authentication (AH) or encryption (ESP).	Enumerationr/w Enumerated Values: 50 espproto 51 ahproto	.1.3.6.1.4.1.10876.101.1.29.2.4.1.3
fsipv6SecAssocSpi This is an arbitrary 32-bit value identifying the security association for this datagram. The Security Parameter Index value 0 is reserved to Indicate that 'no security association exists'. The set of Security Parameter…	Integer32r/w Constraints: range: 256-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.4.1.4
fsipv6SecAssocMode The supporting security association mode. The secassoc mode is configured as Transport or Tunnel when the router is acting as a host. A Security gateway can be configured only in tunnel mode	Enumerationr/w Enumerated Values: 1 tunnel 2 transport	.1.3.6.1.4.1.10876.101.1.29.2.4.1.5
fsipv6SecAssocAhAlgo The authentication algorithm configured for the particular security association entry. This object is not mandatory for creation of an entry.Setting the algorithm to keyed-md5(2) or hmac-md5 (3),hmacsha1(4) requires a k…	Enumerationr/w Enumerated Values: 0 null 1 hmacmd5 2 hmacsha1 3 keyedmd5 4 md5	.1.3.6.1.4.1.10876.101.1.29.2.4.1.6
fsipv6SecAssocAhKey This is the key used for authentication when the algorithm configured is either keyed-md5 or hmac-md5 or hmach-sha1 . This object is not mandatory for creation of an entry. If the algorithm is md5, no key needs to…	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.10876.101.1.29.2.4.1.7
fsipv6SecAssocEspAlgo The type of algorithm used for Encapsulation Security Palyload (ESP) Header.This object is to be configured only if the Security protocol to be used is ESP	Enumerationr/w Enumerated Values: 2 descbc 3 threedescbc 11 null 12 aes	.1.3.6.1.4.1.10876.101.1.29.2.4.1.8
fsipv6SecAssocEspKey ESP authentication key.This must be of 8 Bytes only	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.10876.101.1.29.2.4.1.9
fsipv6SecAssocEspKey2 This object is used for configuring the second key of 3des-cbc.This key must be 8 Bytes only	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.10876.101.1.29.2.4.1.10
fsipv6SecAssocEspKey3 This object is used for configuring the third key of 3des-cbc.This key must be 8 Bytes only	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.10876.101.1.29.2.4.1.11
fsipv6SecAssocLifetimeInBytes The timer interval interms of number of bytes. IPSEC counts the number of bytes to which the IPSEC algorithm is applied. This object specifies the allowed maximum number of bytes. If the value is 0, it signifies that th…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.29.2.4.1.12
fsipv6SecAssocLifetime This specifies the duration in seconds for which this Security Association remains active. After this time interval, the entry becomes inactive and has to be manually made active again. If the value is 0, it signifies t…	Integer32r/w Constraints: range: 300-2592000 range: 0-0	.1.3.6.1.4.1.10876.101.1.29.2.4.1.13
fsipv6SecAssocAntiReplay The object is used for activating the anti repaly functionality of the security protocols	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.1.29.2.4.1.14
fsipv6SecAssocStatus This object is used to create and delete rows from the fsipv6SecAssocTable. It can be set to the value of createAndGo(4),createAndWait(5), notInService(2),active(1) and destroy(6). This object can be configured only w…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.29.2.4.1.15

IPSEC statistics table based on per interface.

fsIpv6SecIfStatsEntry row .1.3.6.1.4.1.10876.101.1.29.3.1.1

An entry in the Interface Statistics table.

Indexes

fsipv6SecIfIndex

Column	Syntax	OID
fsipv6SecIfIndex The index value which uniquely identifies the IPv6 interface on which this interface statistics table entry exists. The interface identified by a particular value of this index is the same interface as identified by …	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.10876.101.1.29.3.1.1.1
fsipv6SecIfInPkts Number of packets recieved on the specified interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.1.1.2
fsipv6SecIfOutPkts Number of packets sent on the specified interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.1.1.3
fsipv6SecIfPktsApply Number of packets for which security is applied which are of either inbound or outbound.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.1.1.4
fsipv6SecIfPktsDiscard Number of packets dropped either of inbound or outbound.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.1.1.5
fsipv6SecIfPktsBypass Number of packets for which IPSEC is not applied which are of either inbound or outbound.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.1.1.6

AH/ESP related statistics table.

fsIpv6SecAhEspStatsEntry row .1.3.6.1.4.1.10876.101.1.29.3.2.1

An entry in the AH/ESP statistics Table.

Indexes

fsipv6SecAhEspIfIndex

Column	Syntax	OID
fsipv6SecAhEspIfIndex The index value which uniquely identifies the IPv6 interface on which this statistics table entry exists. The interface identified by a particular value of this index is the same interface as identified by the same…	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.10876.101.1.29.3.2.1.1
fsipv6SecInAhPkts Number of AH packets recieved.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.2
fsipv6SecOutAhPkts Number of AH packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.3
fsipv6SecAhPktsAllow Number of AH packets allowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.4
fsipv6SecAhPktsDiscard Number of AH packets discarded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.5
fsipv6SecInEspPkts Number of ESP packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.6
fsipv6SecOutEspPkts Number of ESP packets sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.7
fsipv6SecEspPktsAllow Number of ESP packets allowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.8
fsipv6SecEspPktsDiscard Number of ESP packets discarded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.2.1.9

AH/ESP related Intru table.

fsIpv6SecAhEspIntruEntry row .1.3.6.1.4.1.10876.101.1.29.3.3.1

An entry in the AH/ESP intruder Table.

Indexes

fsipv6SecAhEspIntruIndex

Column	Syntax	OID
fsipv6SecAhEspIntruIndex Specifies the index of the entry in the table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.29.3.3.1.1
fsipv6SecAhEspIntruIfIndex The index value which uniquely identifies the IPv6 interface on which this statistics table entry exists. The interface identified by a particular value of this index is the same interface as identified by the same …	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.10876.101.1.29.3.3.1.2
fsipv6SecAhEspIntruSrcAddr Intru's source address.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.29.3.3.1.3
fsipv6SecAhEspIntruDestAddr Intru's destination address.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.29.3.3.1.4
fsipv6SecAhEspIntruProto Intru's Protocol.	Enumeration Enumerated Values: 50 espproto 51 ahproto	.1.3.6.1.4.1.10876.101.1.29.3.3.1.5
fsipv6SecAhEspIntruTime Time of intruders attack.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.29.3.3.1.6