SUPERMICRO-ELPS-MIB Table View

List of ELPS Module parameters per Virtual Context.

fsElpsContextEntry row .1.3.6.1.4.1.10876.101.2.25.2.1.1

Per virtual context ELPS module parameters. An entry in this table gets
created as and when a virtual context is created.

Indexes

fsElpsContextId

Column	Syntax	OID
fsElpsContextId The context identifier is used to distinguish between the multiple virtual bridge contexts within a bridge.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.2.1.1.1
fsElpsContextSystemControl The administrative system control status requested by management for ELPS. The value start(1) indicates that ELPS should be active in the virtual context and on all ports in that virtual context. Memory is reserved i…	Enumerationr/w Enumerated Values: 1 start 2 shutdown	.1.3.6.1.4.1.10876.101.2.25.2.1.1.2
fsElpsContextModuleStatus The administrative module status requested by management for ELPS. The value enable(1) indicates that ELPS should be enabled in the virtual context and on all ports in that virtual context. The value disable(2) indi…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.2.25.2.1.1.3
fsElpsContextTraceInputString This object stores the trace option string input given by the user. Based on the input to this object, trace statements corresponding to the given options are displayed for this virtual context. To enable particular tra…	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.10876.101.2.25.2.1.1.4
fsElpsContextEnableTrap The column is used to enable or disable the transmission of TRAP notification messages.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.25.2.1.1.5
fsElpsContextVlanGroupManager This object identifies the module that manages the grouping of vlans in this virtual context. mstp(1) - MSTP(Multiple Spanning Tree Protocol) module manages the grouping of vlans. In this case, …	Enumerationr/w Enumerated Values: 1 mstp 2 elps	.1.3.6.1.4.1.10876.101.2.25.2.1.1.6

The protection group configuration table for creating and configuring the
protection groups in any virtual context. Each entry in this table 
corresponds to a protection group on a virtual context.
          
The protection switching for MPLS LSP/PW is supported only in the
default context and not in any other contexts.

fsElpsPgConfigEntry row .1.3.6.1.4.1.10876.101.2.25.3.1.1

The protection group table entry. Each entry in this table contains the
required attribute values which define the protection group entry.

Indexes

fsElpsContextId fsElpsPgConfigPgId

Column	Syntax	OID
fsElpsPgConfigPgId The unique identifier for the protection group.	PgId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.1.1.1
fsElpsPgConfigType This object indicates if the protection group needs to provide protection for an individual service or a list of services. If the value is 'individual(1)', the protection is available only for the sing…	PgTyper/w Type Values: 1 individual 2 list 3 all	.1.3.6.1.4.1.10876.101.2.25.3.1.1.2
fsElpsPgConfigServiceType This object indicates the type of transport service for which this protection group will provide protection. The following service types are supported - vlan(1) - mplsLSP(2) - mplsPW(3)	PgServiceTyper/w Type Values: 1 vlan 2 mplsLSP 3 mplsPW	.1.3.6.1.4.1.10876.101.2.25.3.1.1.3
fsElpsPgConfigMonitorMechanism This object indicates the type of monitoring mechanism used for detecting faults for this protection group entry. If the value of this object is not 'none' for any fsElpsPgConfigEntry, then the fsElpsPgCfmTable table…	PgMonitorMechanismTyper/w Type Values: 1 cfm 2 mplsOam 3 none	.1.3.6.1.4.1.10876.101.2.25.3.1.1.4
fsElpsPgConfigIngressPort This object indicates the port through which the traffic ingresses for the working and protection transport services into the protection domain. This port defines the boundary of the protection domain on both the en…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.2.25.3.1.1.5
fsElpsPgConfigWorkingPort This object indicates the working port which carries the normal traffic in the absence of any failure. For 'vlan' service type, this object is mandatory and should be configured with a non-zero value. For other servic…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.2.25.3.1.1.6
fsElpsPgConfigProtectionPort This object indicates the protection port which carries the normal traffic upon failure of the working transport entity. For 'vlan' service type, this object is mandatory and should be configured with a non-zero value…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.2.25.3.1.1.7
fsElpsPgConfigWorkingServiceValue This object indicates the service identifier of the working service which carries the normal traffic in the absence of any failure. This object is applicable only for 'vlan' type of services. …	PgServiceValueOrNoner/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.1.1.8
fsElpsPgConfigProtectionServiceValue This object indicates the service identifier of the protection service which carries the normal traffic upon failure of the working entity. This object is applicable only for 'vlan' type of services. …	PgServiceValueOrNoner/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.1.1.9
fsElpsPgConfigOperType This object is used to indicate the operation type/mode of the protection group entry. If the value is set to 'revertive(1)', then normal traffic will be shifted from the protection entity back to the working entity …	Enumerationr/w Enumerated Values: 1 revertive 2 nonRevertive	.1.3.6.1.4.1.10876.101.2.25.3.1.1.10
fsElpsPgConfigProtType This object is used to indicate the protection architecture type of the protection group entry. Protection architecture types supported are given below: - 'oneIsToOneBidirectionalWithAps(1)', then the selector bridge …	Enumerationr/w Enumerated Values: 1 oneIsToOneBidirectionalWithAps 2 onePlusOneBidirectionalWithAps 3 onePlusOneUnidirectionalWithAps 4 onePlusOneUnidirectionalWithOutAps	.1.3.6.1.4.1.10876.101.2.25.3.1.1.11
fsElpsPgConfigName The name given to the protection group entry. This object is used to refer the protection group in addition to the protection group Id. The default value for this object will be the null string. This object can be co…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.10876.101.2.25.3.1.1.12
fsElpsPgConfigRowStatus This object indicates the status of this row/entry. Setting this object to Active is not allowed in the following scenarios: - If the value of the column fsElpsPgConfigMonitorMechanism is set to 'cfm/mplsOam' a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.25.3.1.1.13
fsElpsPgConfigWorkingServicePointer This object is applicable for 'mplsLSP' and 'mplsPw' service types. When fsElpsPgConfigServiceType is 'mplsLSP' : - This object should be configured with the object identifier of the row in the MPLS …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.1.1.14
fsElpsPgConfigWorkingReverseServicePointer This object is applicable for 'mplsLSP' service type only. When fsElpsPgConfigServiceType is 'mplsLSP' : - Configuring this object is optional. - This object should be configured with the object identif…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.1.1.15
fsElpsPgConfigProtectionServicePointer This object is applicable for 'mplsLSP' and 'mplsPw' service types. When fsElpsPgConfigServiceType is 'mplsLSP' : - This object should be configured with the object identifier of the row in the MPLS …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.1.1.16
fsElpsPgConfigProtectionReverseServicePointer This object is applicable for 'mplsLSP' service type only. When fsElpsPgConfigServiceType is 'mplsLSP' : - Configuring this object is optional. - This object should be configured with the object identif…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.1.1.17
fsElpsPgConfigWorkingInstanceId This is the working instance which contains the VLAN to be protected in this protection group. If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id should be from one of the MSTIs created in …	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.10876.101.2.25.3.1.1.18
fsElpsPgConfigProtectionInstanceId This is the protection instance which contains the protection VLANs in this protection group. If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id should be from one of the MSTIs created in M…	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.10876.101.2.25.3.1.1.19
fsElpsPgPscVersion This object indicates the PSC header version number to be used for transmitting the Protection State Coordination (PSC) control packet through the generic associated channel (G-ACh) for LSP/pseudowire. Al…	Unsigned32r/w Constraints: range: 0-1	.1.3.6.1.4.1.10876.101.2.25.3.1.1.20

The protection group command table. Each entry in this table 
corresponds to a configured protection group on a virtual context in this
bridge. Entry in this table is implicitly created when an entry for 
protection group is created in the fsElpsPgConfigTable table. 
This table contains commands and parameters that are configured for a 
protection group entry which is active and status objects providing the
local and far end requests and states.

fsElpsPgCmdEntry row .1.3.6.1.4.1.10876.101.2.25.3.2.1

The protection group command table entry. Each entry in this table
contains objects that operate on the state event machine for the
protection group and can be configured when the protection group entry
is active.
…

Indexes

fsElpsContextId fsElpsPgConfigPgId

Column	Syntax	OID
fsElpsPgCmdHoTime This column is used to configure the hold-off timer. The purpose is to allow a server layer protection mechanism to have a chance to fix the problem before switching at the client layer, or to allow an upstream pro…	Unsigned32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.10876.101.2.25.3.2.1.1
fsElpsPgCmdWTR This column is used to configure the wait-to-restore timer for the protection group. The timer has a period from 1 to 1000 minutes, configurable in steps of 1 minute. This object is applicable only i…	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.10876.101.2.25.3.2.1.2
fsElpsPgCmdExtCmd This column is used by the operator to request that the protection group state machine perform some administrative operation. The operator requests a command by writing the command value to this column. The command …	PgExtCmdr/w Type Values: 1 lockOutProtection 2 forceSwitchToProtection 3 manualSwitchToProtection 4 exercise 5 clear 6 freeze 7 clearFreeze 8 manualSwitchToWorking	.1.3.6.1.4.1.10876.101.2.25.3.2.1.3
fsElpsPgCmdExtCmdStatus This column indicates the status of the most recent administrative command issued to this protection group through the fsElpsPgCmdExtCmd object.	Enumeration Enumerated Values: 1 accepted 2 overruled 3 notApplicable 4 rejected	.1.3.6.1.4.1.10876.101.2.25.3.2.1.4
fsElpsPgCmdLocalCondition This column indicates the most recent local condition that had occurred for this protection group.	PgLocalCondition Type Values: 1 signalFailOnWorking 2 recoverSignalFailOnWorking 3 signalFailOnProtection 4 recoverSignalFailOnProtection 5 waitToRestoreExpiry	.1.3.6.1.4.1.10876.101.2.25.3.2.1.5
fsElpsPgCmdLocalConditionStatus This column indicates the status of the most recent local condition as indicated by the fsElpsPgCmdLocalCondition that occured for this protection group.	Enumeration Enumerated Values: 1 accepted 2 overruled 3 notApplicable 4 rejected	.1.3.6.1.4.1.10876.101.2.25.3.2.1.6
fsElpsPgCmdFarEndRequest This column indicates the most recent far-end request received for this protection group through the reception of APS PDU.	PgFarEndRequest Type Values: 1 lockOutProtection 2 signalFailOnProtection 3 forceSwitchToProtection 4 signalFailOnWorking 5 manualSwitchToProtection 6 waitToRestore 7 exerciseOnWorking 8 exerciseOnProtection 9 reverseRequestOnWorking 10 reverseRequestOnProtection 11 noRequestOnWorking 12 noRequestOnProtection 13 doNotRevert 14 manualSwitchToWorking	.1.3.6.1.4.1.10876.101.2.25.3.2.1.7
fsElpsPgCmdFarEndRequestStatus This column indicates the status of the most recent far-end request as indicated by the fsElpsPgCmdFarEndRequest object received for this protection group.	Enumeration Enumerated Values: 1 accepted 2 overruled 3 notApplicable 4 rejected	.1.3.6.1.4.1.10876.101.2.25.3.2.1.8
fsElpsPgCmdActiveRequest This column indicates the last local request (command or condition) or far end request (received for this protection group through the reception of APS PDU) that was accepted and applied to this protection group. The…	PgActiveRequest Type Values: 0 localLockOutProtection 1 localForcedSwitchToProtection 2 localSignalFailOnWorking 3 localRecoverSignalFailOnWorking 4 localSignalFailOnProtection 5 localRecoverSignalFailOnProtection 6 localManualSwitchToProtection 7 localManualSwitchToWorking 8 localClear 9 localExercise 10 localWaitToRestoreExpiry 11 farLockOutProtection 12 farSignalFailOnProtection 13 farForceSwitchToProtection 14 farSignalFailOnWorking 15 farManualSwitchToProtection 16 farManualSwitchToWorking 17 farWaitToRestore 18 farExerciseOnWorking 19 farExerciseOnProtection 20 farReverseRequestOnWorking 21 farReverseRequestOnProtection 22 farNoRequestOnWorking 23 farNoRequestOnProtection 24 farDoNotRevert	.1.3.6.1.4.1.10876.101.2.25.3.2.1.9
fsElpsPgCmdSemState This column shows the current state of the State Event Machine for this protection group.	PgSemState Type Values: 0 noRequestOnWorking 1 noRequestOnProtection 2 lockOutProtection 3 forceSwitchToProtection 4 signalFailOnWorking 5 signalFailOnProtection 6 manualSwitchToProtection 7 manualSwitchToWorking 8 waitToRestore 9 doNotRevert 10 exerciseOnWorking 11 exerciseOnProtection 12 reverseRequestOnWorking 13 reverseRequestOnProtection	.1.3.6.1.4.1.10876.101.2.25.3.2.1.10
fsElpsPgCmdPgStatus The object is to indicate the status of the protection group.	PgStatus Type Values: 0 protectionDisabled 1 workingPathActive 2 protectionPathActive 3 waitToRestoreState 4 holdOffState 5 switchingFailed 6 unavailable 7 doNotRevert	.1.3.6.1.4.1.10876.101.2.25.3.2.1.11
fsElpsPgCmdApsPeriodicTime This column is used to configure the time interval for the periodic transmission of - Protection Switching PDUs, namely, APS PDU for 'vlan' service - Protection State Coordination Protocol messages, namely, PSC pack…	secondsUnsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.10876.101.2.25.3.2.1.12

This table contains the configurations related to the monitoring entities
for each protection group as denoted by the fsElpsPgConfigPgId object. 
Currently, fault monitoring using the Y.1731 mechanism and BFD are supported. 
The creation of an entry in this table does not create the 
Y.1731 / MPLS-OAM Monitoring entities. These Monitoring entities have to be created 
explicitly in ECFM or in MPLS-OAM accordingly.

fsElpsPgCfmEntry row .1.3.6.1.4.1.10876.101.2.25.3.3.1

The entry indicating the monitoring entities for each protection group.

Indexes

fsElpsContextId fsElpsPgConfigPgId

Column	Syntax	OID
fsElpsPgCfmWorkingMEG This refers to the Maintenance Entity Group (MEG) that the working entity of the protection group denoted by fsElpsPgConfigPgId corresponds to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.1
fsElpsPgCfmWorkingME This refers to the Maintenance Entity (ME) that the working entity of the protection group denoted by fsElpsPgConfigPgId corresponds to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.2
fsElpsPgCfmWorkingMEP This refers to the Maintenance Entity Group (MEG) End Point (MEP) that monitors the working entity of the protection group denoted by the fsElpsPgConfigPgId value.	IEEE8021-CFM-MIBDot1agCfmMepIdr/w Type Constraints: range: 1..8191	.1.3.6.1.4.1.10876.101.2.25.3.3.1.3
fsElpsPgCfmProtectionMEG This refers to the Maintenance Entity Group (MEG) that the protection entity of the protection group denoted by fsElpsPgConfigPgId corresponds to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.4
fsElpsPgCfmProtectionME This refers to the Maintenance Entity (ME) that the protection entity of the protection group denoted by fsElpsPgConfigPgId corresponds to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.5
fsElpsPgCfmProtectionMEP This refers to the Maintenance Entity Group (MEG) End Point (MEP) that monitors the protection entity of the protection group denoted by the fsElpsPgConfigPgId value.	IEEE8021-CFM-MIBDot1agCfmMepIdr/w Type Constraints: range: 1..8191	.1.3.6.1.4.1.10876.101.2.25.3.3.1.6
fsElpsPgCfmRowStatus The status of this row. The writable columns in any row of this table cannot be changed while the row is active. Furthermore, creation of any entry or modification to any entry in this table is allowed only when the co…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.25.3.3.1.7
fsElpsPgCfmWorkingReverseMEG This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Group (MEG) for the reverse working entity. In case of co-rou…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.8
fsElpsPgCfmWorkingReverseME This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity (ME) for the reverse working entity. In case of co-routed mpl…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.9
fsElpsPgCfmWorkingReverseMEP This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Group(MEG) End Point (MEP) that monitors the reverse working…	IEEE8021-CFM-MIBDot1agCfmMepIdr/w Type Constraints: range: 1..8191	.1.3.6.1.4.1.10876.101.2.25.3.3.1.10
fsElpsPgCfmProtectionReverseMEG This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Group (MEG) for the reverse protection entity of the protecti…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.11
fsElpsPgCfmProtectionReverseME This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity (ME) for the reverse protection entity of the protection group…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.3.1.12
fsElpsPgCfmProtectionReverseMEP This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Group (MEG) End Point (MEP) that monitors the reverse protect…	IEEE8021-CFM-MIBDot1agCfmMepIdr/w Type Constraints: range: 1..8191	.1.3.6.1.4.1.10876.101.2.25.3.3.1.13

The protection group service list table contains the list of services   
that needs to be protected for the corresponding protection group entry. 
This table needs to be populated only for those protection groups which 
have the value of the object fsElpsPgConfigType as 'list'. Protecting 
a list of services is only possible when the same set of services (and
therefore service identifiers) are used for both the working and 
protection entities.
          
This table is applicable for service type 'vlan' only.

fsElpsPgServiceListEntry row .1.3.6.1.4.1.10876.101.2.25.3.4.1

The protection group service list table entry. Creation of this entry is
allowed only if the value of the object fsElpsPgConfigType is configured
as 'list'.

Indexes

fsElpsContextId fsElpsPgConfigPgId fsElpsPgServiceListValue

Column	Syntax	OID
fsElpsPgServiceListValue This object indicates the services which needs to be protected for this protection group and which will have its traffic shifted from the port indicated by fsElpsPgConfigWorkingPort object to the port indicated by the …	PgServiceValue Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.4.1.1
fsElpsPgServiceListRowStatus The status of this row. The valid options supported for this table are 'createAndGo' and 'destroy'. Entries in this table cannot be created or modified when the corresponding entry in the protection group config table…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.25.3.4.1.2

The protection group share table contains the set of protection groups
that share the same protection entity (i.e. protection port).

fsElpsPgShareEntry row .1.3.6.1.4.1.10876.101.2.25.3.5.1

The protection group share table entry. Each entry indicates a protection
group that shares the protection port.

Indexes

fsElpsContextId fsElpsPgShareProtectionPort fsElpsPgConfigPgId

Column	Syntax	OID
fsElpsPgShareProtectionPort This object indicates the protection entity (port) which carries the normal traffic upon failure of the working transport entity.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.25.3.5.1.1
fsElpsPgSharePgStatus The object is to indicate the status of the protection group that shares the protection port as indicated by the fsElpsPgConfigProtectionPort object.	PgStatus Type Values: 0 protectionDisabled 1 workingPathActive 2 protectionPathActive 3 waitToRestoreState 4 holdOffState 5 switchingFailed 6 unavailable 7 doNotRevert	.1.3.6.1.4.1.10876.101.2.25.3.5.1.2

This table contains statistics information for each of the protection
groups present in the system. Entries in this table are created 
implicitly by the creation of entries in the fsElpsPgConfigTable.

fsElpsPgStatsEntry row .1.3.6.1.4.1.10876.101.2.25.3.6.1

The protection group statistics table entry. There is one entry in this
table for each entry in the fsElpsPgConfigTable table.

Indexes

fsElpsContextId fsElpsPgConfigPgId

Column	Syntax	OID
fsElpsPgStatsAutoProtectionSwitchCount This object records the number of times automatic protection switching has happened for this protection group entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.1
fsElpsPgStatsForcedSwitchCount This object records the number of times a forced protection switch has happened for this protection group entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.2
fsElpsPgStatsManualSwitchCount This object records the number of times a manual protection switch has happened for this protection group entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.3
fsElpsPgStatsClearStatistics This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'. This column will always return 'false(2)' when read.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.25.3.6.1.4
fsElpsPgStatsApsPktTxCount This object records the total number of APS/PSC packets attempted to be transmitted out of this protection group entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.5
fsElpsPgStatsApsPktRxCount This object records the total number of APS/PSC packets received by this protection group entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.6
fsElpsPgStatsApsPktDiscardCount This object records the total number of APS/PSC packets discarded in this protection group entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.7
fsElpsPgLRSFRxTime This object indicates the timestamp when receiving Local Request - signal fail message. This is detected in local node and it is not got from the packet. The time is in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.8
fsElpsPgLRSFTxTime This object indicates the timestamp when sending Local Request - signal fail packet to the peer node. The time is in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.9
fsElpsPgFRSFRxTime This object indicates the timestamp when receiving Far end Request - signal fail packet from the peer node. The time is in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.10
fsElpsPgStateChgTime This object indicates the timestamp when the protection path becomes active after processing the signal fail packet that is received from the peer. The time is in milliseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.6.1.11

The protection group service list pointer table contains the 
object identifiers for the list of services that needs to be protected 
and the corresponding the protection services.
          
This table is applicable only when the protection group type is 'list'.
          
This table is useful when each of the working service has a specific protection 
service who's service value is different from the working service value. 
          
This table also helps to generically configure the working and protection services
in terms of specifying their 'object identifiers', instead of directly configuring 
the value of the services.

fsElpsPgServiceListPointerEntry row .1.3.6.1.4.1.10876.101.2.25.3.7.1

The protection group service list pointer table entry.
Creation of this entry is allowed only if the value of the object fsElpsPgConfigType
is configured as 'list'.

Indexes

fsElpsContextId fsElpsPgConfigPgId fsElpsPgServiceListId

Column	Syntax	OID
fsElpsPgServiceListId Unique numeric identifier for a working and protection service set in a protection list within the protection group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.25.3.7.1.1
fsElpsPgWorkingServiceListPointer This object points to a working service which needs to be protected. This object is applicable for 'mplsLSP' and 'mplsPw' service type. When fsElpsPgConfigServiceType is 'mplsLSP' : - …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.7.1.2
fsElpsPgWorkingReverseServiceListPointer This object points to the reverse path of the working service that is protected. This object is optional and is applicable only when the forward and resverse paths are different for certain type of services. …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.7.1.3
fsElpsPgProtectionServiceListPointer This object points to the protection service corresponding to the working service. This object is applicable for 'mplsLSP' and 'mplsPw' service types. When fsElpsPgConfigServiceType is 'm…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.7.1.4
fsElpsPgProtectionReverseServiceListPointer This object points to the reverse path of the protection service. Configuring this object is optional and is applicable only when the forward and resverse paths are different for certain type of services. …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.2.25.3.7.1.5
fsElpsPgServiceListPointerRowStatus The status of this row. Entries in this table cannot be created or modified when the corresponding entry in the protection group config table for this fsElpsPgConfigPgId is active. RowStatus can be made…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.25.3.7.1.6