SUPERMICRO-ECFM-Y1731-MI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

316

fsMIY1731PortTable

table

.1.3.6.1.4.1.10876.101.2.7.1.1.1 · 1 row entry · 31 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731PortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731PortTable'

Contains ECFM information specific to interface.

fsMIY1731PortEntry row .1.3.6.1.4.1.10876.101.2.7.1.1.1.1

Each entry in this table is for each interface present in the system.
This table is indexed by the fsMIY1731PortIfIndex

Indexes

fsMIY1731PortIfIndex

Column Syntax OID

fsMIY1731PortIfIndex

This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.1

fsMIY1731PortAisOut

Number of AIS PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.2

fsMIY1731PortAisIn

Number of AIS PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.3

fsMIY1731PortLckOut

Number of LCK PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.4

fsMIY1731PortLckIn

Number of LCK PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.5

fsMIY1731PortTstOut

Number of TST PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.6

fsMIY1731PortTstIn

Number of TST PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.7

fsMIY1731PortLmmOut

Number of LMM PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.8

fsMIY1731PortLmmIn

Number of LMM PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.9

fsMIY1731PortLmrOut

Number of LMR PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.10

fsMIY1731PortLmrIn

Number of LMR PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.11

fsMIY1731Port1DmOut

Number of 1DM PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.12

fsMIY1731Port1DmIn

Number of 1DM PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.13

fsMIY1731PortDmmOut

Number of DMM PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.14

fsMIY1731PortDmmIn

Number of DMM PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.15

fsMIY1731PortDmrOut

Number of DMR PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.16

fsMIY1731PortDmrIn

Number of DMR PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.17

fsMIY1731PortApsOut

Number of APS PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.18

fsMIY1731PortApsIn

Number of APS PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.19

fsMIY1731PortMccOut

Number of MCC PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.20

fsMIY1731PortMccIn

Number of MCC PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.21

fsMIY1731PortVsmOut

Number of VSM PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.22

fsMIY1731PortVsmIn

Number of VSM PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.23

fsMIY1731PortVsrOut

Number of VSR PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.24

fsMIY1731PortVsrIn

Number of VSR PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.25

fsMIY1731PortExmOut

Number of EXM PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.26

fsMIY1731PortExmIn

Number of EXM PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.27

fsMIY1731PortExrOut

Number of EXR PDUs transmitted by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.28

fsMIY1731PortExrIn

Number of EXR PDUs received by this interface.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.29

fsMIY1731PortOperStatus

The administrative module status of Ethernet Y1731
functionality. This enables or disables Y1731 in the system.
If set to enable, enables the Y1731 for a particular port.
Otherwise, disables Y1731 for a particular por…

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.30

fsMIY1731LastTxFailOpcode

This object will contain the Opcode value of Last Tx Failure CFM PDU.
When CFM PDU is not transmitted from system due to system failure then
CFM PDU Tx failure trap will generate & which contain this value.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.1.1.1.31

fsMIY1731ContextTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.1 · 1 row entry · 15 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731ContextTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731ContextTable'

List of per virtual context ECFM-Y1731 Module Parameters.

fsMIY1731ContextEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.1.1

Per virtual context ECFM-Y1731 module parmaters.

Indexes

fsMIY1731ContextId

Column Syntax OID

fsMIY1731ContextId

Identifies the virtual context in the system.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.1

fsMIY1731ContextName

Name of the virtual context.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.2

fsMIY1731FrameLossBufferClear

Trigger to remove the contents of Buffer maintained for storing
frame-loss measured at various times.

Note: Get operation value should be ignored.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.3

fsMIY1731FrameDelayBufferClear

Trigger to remove the contents of Buffer maintained for storing
frame-delay measured at various times.

Note: Get operation value should be ignored.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.4

fsMIY1731LbrCacheClear

Trigger to remove the contents of loopback cache maintained for
storing loop back replies.

Note: Get operation value should be ignored.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.5

fsMIY1731ErrorLogClear

Trigger to remove the contents of continuity check error log
maintained to store continuity check errors detected by MEP.

Note: Get operation value should be ignored.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.6

fsMIY1731FrameLossBufferSize

The Maximum size (in entries) of the Frame Loss Buffer.

Integer32r/w

Constraints:
range: 1-4096

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.7

fsMIY1731FrameDelayBufferSize

The Maximum number of entries for the Frame Delay Buffer

Integer32r/w

Constraints:
range: 1-4096

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.8

fsMIY1731LbrCacheSize

The Maximum number of entries for the loopback replies (LBR) Cache

Integer32r/w

Constraints:
range: 1-4096

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.9

fsMIY1731LbrCacheHoldTime

The Time (in minutes) for which loopback replies (LBR) cache table
entries are retained.

Integer32r/w

Constraints:
range: 1-2880

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.10

fsMIY1731TrapControl

A vector of Boolean notification types, used to enable or disable the
Y1731 notification types:
bTrapBadPduReceived
bTrapFrameLoss
bTrapFrameDelay
bTrapDefRdiCondition
bTrapDefLossOfC…

FsY1731Trapsr/w

Type Values:

0	none
1	bTrapTstReceivedWithError
2	bTrapFrameLoss
3	bTrapFrameDelay
4	bTrapDefRdiCondition
5	bTrapDefLossOfContinuity
6	bTrapDefUnexpectedPeriod
7	bTrapDefUnexpectedMep
8	bTrapDefMisMerge
9	bTrapDefUnexpectedMegLevel
10	bTrapDefLocalLinkFailure
11	bTrapDefInternalHWFailure
12	bTrapDefInternalSWFailure
13	bTrapDefAisCondition
14	bTrapDefLckCondition

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.11

fsMIY1731ErrorLogStatus

The administrative status of Error Log.

This enables or disables the logging of errors or defects
detected by MEP.

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.12

fsMIY1731ErrorLogSize

The Maximum number of entries for the Error Log,
only if fsMIY1731ErrorLogStatus is enabled.

Integer32r/w

Constraints:
range: 1-4096

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.13

fsMIY1731OperStatus

The administrative module status of Ethernet Y1731 functionality
in CFM module. This enables or disables Y1731 in the system.

A value of 'enabled' (1) indicates that Y1731 is enabled in the
device. A v…

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.14

fsMIY1731LbrCacheStatus

The administrative status of LBR cache.
This enables or disables caching of LBRs

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.1.1.15

fsMIY1731MegTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731MegTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731MegTable'

The Maintenance Entity Group table. Each row in the table
represents a different Maintenance Entity Group.
          
A Maintenance Entity Group is described in ITU-T Recommendation 
Y.1731 as the one which includes different MEs that satisfy the 
following conditions:
- MEs in a MEG exist in the same administrative boundary; and
- MEs in a MEG have the same MEG Level; and
- MEs in a MEG belong to the same point-to-point ETH connection or 
  multipoint ETH connectivity.

fsMIY1731MegEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.2.1

The Maintenance Entity Group table entry. This entry is not lost
upon reboot. It is backed up by stable storage.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex

Column Syntax OID

fsMIY1731MegIndex

The index to the Maintenance Entity Group table.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.2.1.1

fsMIY1731MegClientMEGLevel

The MEG Level at which the most immediate client layer MEPs or MIPs
exist.
The value (-1) is reserved to indicate that no client MEG level has
been configured.

IEEE8021-CFM-MIBDot1agCfmMDLevelOrNoner/w

Type Constraints:
range: -1..7

.1.3.6.1.4.1.10876.101.2.7.1.2.2.1.2

fsMIY1731MegVlanPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG
until user explicitly configures particular frame's priority.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.2.1.3

fsMIY1731MegDropEnable

Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted CFM frame.
Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG
until user explicitly configures particular frame's drop…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.2.1.4

fsMIY1731MegRowStatus

Indicates the status of MEG row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible values are row status active and
row st…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.10876.101.2.7.1.2.2.1.5

fsMIY1731MeTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.3 · 1 row entry · 6 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731MeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731MeTable'

The Maintenance Entity table.  Each row in the table represents 
an ME.  An ME represents a relationship between two MEPs, each 
configured with a single service instance.
          
Configuring a Maintenance Entity Group End Point (MEP) at each 
of the DSAPs creates a Maintenance Entity (ME) to monitor
that connectionless connectivity. The ITU-Carrier Code (ICC) and 
Unique MEGID Code (UMC) form the Maintenance Entity Group Identifier 
(MEGID) that is carried in CFM Messages to identify incorrect 
connectivity among Service Instances.  A small integer, the 
Maintenance Entity Group End Point Identifier (MEPID), identifies 
each MEP among those configured on a single ME.
          
This table uses two indices, first index is the index of the
Maintenance Entity Group table.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.

fsMIY1731MeEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.3.1

The ME table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex

Column Syntax OID

fsMIY1731MeIndex

Index of the ME table.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.3.1.1

fsMIY1731MeCciEnabled

If set to true, all MEPs in the ME will generate CCM messages.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.3.1.2

fsMIY1731MeCcmApplication

An enumerated value indicating the ETH-CC Role.
Note: Performance Monitoring is applicable only for point-to-point
Maintenance Entity (ME).

FsY1731CcmApplicationr/w

Type Values:

0	ccFaultManagement
1	ccPerformanceMonitoring
2	ccProtectionSwitching

.1.3.6.1.4.1.10876.101.2.7.1.2.3.1.3

fsMIY1731MeMegIdIcc

Unique code assigned to Network Operator or Service Provider maintained
by ITU-T Telecommunication Standardization Bureau.

The ITU Carrier Code used to form MEGID.

This object contains non-…

OctetStringr/w

Constraints:
range: 0-6

.1.3.6.1.4.1.10876.101.2.7.1.2.3.1.4

fsMIY1731MeMegIdUmc

Unique code assigned by Network Operator or Service Provider
and is appended to fsMIY1731MeMegIdIcc to form the MEGID

The unique MEGID Code used to form MEGID.

This object contains non-nu…

OctetStringr/w

Constraints:
range: 0-6

.1.3.6.1.4.1.10876.101.2.7.1.2.3.1.5

fsMIY1731MeRowStatus

Indicates the status of ME row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible values are row status act…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.3.1.6

fsMIY1731MepTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.4 · 1 row entry · 136 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731MepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731MepTable'

The Maintenance Entity Group End Point (MEP) table.
          
Each row in the table represents a different MEP. A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses.  It is an end point of a
single Maintenance Entity.
          
This table uses three indices. The first two indices are the
indices of the Maintenance Entity Group (MEG) and Maintenance 
Entity (ME) tables, the reason being that a MEP is always 
related to an ME and MEG.
          
The MEP table stores all the managed objects for sending
LBM, LTM, AIS and LCK. This table also stores all the managed
objects required for monitoring the performance.
          
The objects which are used to initiate a transaction are to
be set only when the row-status of the table is active.
'fsMIY1731MepTransmit' naming convention is used to isolate 
these objects from the others.

fsMIY1731MepEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.4.1

The MEP table entry

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier

Column Syntax OID

fsMIY1731MepIdentifier

Integer that is unique among all the MEPs in the same ME.
Other definition is: a small integer, unique over a given
Maintenance Entity, identifying a specific Maintenance
Entity Group End Point.

MEP Ident…

IEEE8021-CFM-MIBDot1agCfmMepId

Type Constraints:
range: 1..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.1

fsMIY1731MepOutOfService

A Boolean indicating the administrative service that is being or to be
performed.
true indicates operation needs to be performed Out-of-service
and false indicates operation needs to be performed In-service.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.2

fsMIY1731MepRdiCapability

The administrative status of RDI Transmission capability.
This enables or disables the transmission of RDI bit in the CCM PDU by
the MEP.
If fsMIY1731MepRdiPeriod is provided then it will be enabled for that
period onl…

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.3

fsMIY1731MepRdiPeriod

Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability)
is enabled.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.4

fsMIY1731MepCcmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted CCM frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.5

fsMIY1731MepCcmPriority

This Mib object is used for configuring CCM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.

For Ethernet:
The Priority is a 3-bit priority value to be used in the VLAN tag,
if pre…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.6

fsMIY1731MepMulticastLbmRecvCapability

The administrative status of Multicast LBM frame reception. This enables
or disables the capability of MEP to process the multicast LBM.

A value of 'enabled' (1) indicates to accept and process multicast…

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.7

fsMIY1731MepLoopbackCapability

The administrative status of Loopback (ping) capability.
This enables or disables capability of MEP to initiate and process
Loopback (ping) operation.
A value of 'enabled' (1) indicates to initiate as well as process…

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.8

fsMIY1731MepLbmCurrentTransId

Identifies the current LBM Transaction.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.9

fsMIY1731MepTransmitLbmStatus

An Enumerated value set to 'start' to initiate LBM transmission
and 'stop' to stop LBM transmission.
'ready' and 'notReady' indicates whether LBM can be initiated or not.

Note: User can not set to 'ready…

FsY1731TransmitStatusr/w

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.10

fsMIY1731MepTransmitLbmResultOK

Indicates the result of LBM transaction,
- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
be sent.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.11

fsMIY1731MepTransmitLbmDestMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitLbmDestType is 'Unicast'

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.12

fsMIY1731MepTransmitLbmDestMepId

The Maintenance association End Point Identifier of another
MEP in the same Maintenance Entity to which the LBM is
to be sent.
This address will be used if the value of the column
fsMIY1731MepTransmitLbmDestType is for …

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.13

fsMIY1731MepTransmitLbmDestType

Indicates the Lbm Destination Type i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network).

FsY1731DestTyper/w

Type Values:

0	unicast
1	mepid
2	multicast
3	mipid

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.14

fsMIY1731MepTransmitLbmMessages

The number of Loopback messages to be transmitted.

Integer32r/w

Constraints:
range: 0-8192

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.15

fsMIY1731MepTransmitLbmInterval

Interval between two successive LBM transmissions to be used by the
MEP.
fsMIY1731MepTransmitLbmIntervalType are used as units for this object.

Ranges applicable for allowed units are:
10-1000 for micros…

Unsigned32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.16

fsMIY1731MepTransmitLbmIntervalType

Units of fsMIY1731MepTransmitLbmInterval to be used by the
MEP for LBM transmission.

FsY1731TimeIntervalTyper/w

Type Values:

1	microseconds
2	milliseconds
3	seconds

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.17

fsMIY1731MepTransmitLbmDeadline

Specify a timeout, in seconds, before loopback (ping) exits.
Loopback (ping) exits, if configured number of messages
fsMIY1731MepTransmitLbmMessages are sent before timeout.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.18

fsMIY1731MepTransmitLbmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LBM frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.19

fsMIY1731MepTransmitLbmPriority

This Mib object is used for configuring LBM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.

For Ethernet:
The Priority is a 3-bit priority value to be used in the VLAN tag,
if pre…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.20

fsMIY1731MepTransmitLbmVariableBytes

Indicates a varying number of data bytes is to be transmitted in the
LBM.
'true' indicates that LBMs to be transmitted are with varying bytes
of data and 'false' indicates that LBM(s)to be transmitted is of
the sam…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.21

fsMIY1731MepTransmitLbmTlvType

Indicates the type of the TLV to be included in the LBM frame, if
required to be send.

FsY1731TransmitLbmTlvTypeOrNoner/w

Type Values:

0	none
1	dataTlv
2	testTlv

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.22

fsMIY1731MepTransmitLbmDataPattern

An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent, determined by the
fsMIY1731MepTransmitLbmTlvType.

Size of data value sent in LBM is determined by the
fs…

OctetStringr/w

Constraints:
range: 0-8970

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.23

fsMIY1731MepTransmitLbmDataPatternSize

Indicates the size (bytes) of the
pattern(fsMIY1731MepTransmitLbmDataPatterm)
to be included in the Data TLV, if the Data TLV is to be included in the
LBM.
fsMIY1731MepTransmitLbmDataPattern should be of zero length i…

Unsigned32r/w

Constraints:
range: 0-8970

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.24

fsMIY1731MepTransmitLbmTestPatternType

Indicates the type of pattern to be included in the test TLV of the LBM,
if the Test TLV is selected to be sent.

FsY1731TestTlvPatternTyper/w

Type Values:

0	patternNullSignalWithoutCRC32
1	patternNullSignalWithCRC32
2	patternPRBSWithoutCRC32
3	patternPRBSWithCRC32

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.25

fsMIY1731MepTransmitLbmTestPatternSize

Indicates the size of the pattern to be included in the Test TLV,
if the Test TLV is selected to be sent.

Maximum frame size supported by ECFM is 9K,
following is the calculation for the maximum size of t…

Unsigned32r/w

Constraints:
range: 0-8969

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.26

fsMIY1731MepTransmitLbmSeqNumber

The sequence number to be transmitted in the next LBM.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.27

fsMIY1731MepBitErroredLbrIn

The number of bit-errored LBRs received.
LBR with different pattern as of Test TLV in the sent LBM is considered
as bit-errored LBR

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.28

fsMIY1731MepTransmitLtmStatus

A Enumerated value set to 'transmit' to initiate LTM transmission.
'ready' and 'notReady' indicates whether LTM can be initiated or not.

Note: User can not set to 'ready' or 'notReady'.

Enumerationr/w

Enumerated Values:

0	ready
1	notReady
2	transmit

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.29

fsMIY1731MepTransmitLtmResultOK

Indicates the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.30

fsMIY1731MepTransmitLtmFlags

The flags field for LTMs transmitted by the MEP. Indicates that only MAC
address learned in bridge's forwarding tables is to be used to forward
the LTM to the next hop.

Bitsr/w

Enumerated Values:

useHWonly

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.31

fsMIY1731MepTransmitLtmTargetMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitLtmTargetIsMepId is 'false'.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.32

fsMIY1731MepTransmitLtmTargetMepId

An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
f…

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.33

fsMIY1731MepTransmitLtmTargetIsMepId

True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.34

fsMIY1731MepTransmitLtmTtl

The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each entity that handles the LTM.
The value received in the LTM is returne…

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.35

fsMIY1731MepTransmitLtmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted LTM frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.36

fsMIY1731MepTransmitLtmPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LTM frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.37

fsMIY1731MepTransmitLtmSeqNumber

The sequence number to be transmitted in next LBM.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.38

fsMIY1731MepTransmitLtmTimeout

Time for all the replies (LTR) of a LTM to be received by
the MEP.No reply (LTR) would be entertained thereafter (timeout).

Integer32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.39

fsMIY1731MepMulticastTstRecvCapability

The administrative status of multicast TST frame reception. This
enables or disables the capability of MEP to process the multicast TST.
A value of 'enabled' (1) indicates to accept and process multicast TST.
A value …

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.40

fsMIY1731MepTransmitTstPatternType

Indicates the type of the pattern to be included in the test TLV of TST
frame.

FsY1731TestTlvPatternTyper/w

Type Values:

0	patternNullSignalWithoutCRC32
1	patternNullSignalWithCRC32
2	patternPRBSWithoutCRC32
3	patternPRBSWithCRC32

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.41

fsMIY1731MepTransmitTstVariableBytes

Indicates a varying number of data bytes to send in the TST.
True indicates that TSTs are to be send with varying bytes of data and
False indicates that TST(s) are send with same number of bytes of data.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.42

fsMIY1731MepTransmitTstPatternSize

Indicates the size of the pattern to be included in the Test TLV of
the TST message.

Maximum frame size supported by ECFM is 9K,
following is the calculation for the maximum size of test-tlv supported
by…

Unsigned32r/w

Constraints:
range: 0-8969

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.43

fsMIY1731MepTransmitTstDestType

Indicates the TST Destination Types (unicast,MEPID,Multicast)

FsY1731DestTyper/w

Type Values:

0	unicast
1	mepid
2	multicast
3	mipid

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.44

fsMIY1731MepTransmitTstDestMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitTstDestType is 'Unicast'

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.45

fsMIY1731MepTransmitTstDestMepId

The Maintenance Entity Group End Point Identifier of another
MEP in the same Maintenance Association to which the TST is
to be sent.
This address will be used if the value of the column
fsMIY1731MepTransmitTstDestType i…

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.46

fsMIY1731MepTransmitTstSeqNumber

Sequence number to be sent in the TST message.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.47

fsMIY1731MepTransmitTstPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted TST frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.48

fsMIY1731MepTransmitTstDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted TST frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.49

fsMIY1731MepTransmitTstMessages

The number of Test messages to be transmitted.

Integer32r/w

Constraints:
range: 0-8192

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.50

fsMIY1731MepTransmitTstStatus

An Enumerated value set to 'start' to initiate TST transmission
and 'stop' to stop TST transmission.
'ready' and 'notReady' indicates whether TST can be initiated or not.

Note: User can not set to 'ready…

FsY1731TransmitStatusr/w

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.51

fsMIY1731MepTransmitTstResultOK

Indicates the result of the operation:

- true The Test Message(s) will be
(or has been) sent.
- false The Test Message(s) will not
be sent.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.52

fsMIY1731MepTransmitTstInterval

Interval between two successive TST transmissions to be used by the
MEP.
fsMIY1731MepTransmitTstIntervalType is used as units for this object.

Ranges applicable for allowed units are:
10-1000 for microse…

Unsigned32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.53

fsMIY1731MepTransmitTstIntervalType

Units of fsMIY1731MepTransmitTstInterval to be used by the
MEP for TSTs transmission.

FsY1731TimeIntervalTyper/w

Type Values:

1	microseconds
2	milliseconds
3	seconds

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.54

fsMIY1731MepTransmitTstDeadline

Specify a timeout(in seconds), before test exits. Test exits, if
configured number of messages are sent before timeout.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.55

fsMIY1731MepBitErroredTstIn

The number of bit-errored TST messages received.
Reception of invalid TST message is considered as bit-errored TST
messages.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.56

fsMIY1731MepValidTstIn

Number of valid TST messages received.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.57

fsMIY1731MepTstOut

Number of TST messages transmitted.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.58

fsMIY1731MepTransmitLmmStatus

An Enumerated value set to 'start' to initiate LM transmission
and 'stop' to stop LM transmission.
'ready' and 'notReady' indicates whether LM can be initiated or not.

Note: User can not set to 'ready' o…

FsY1731TransmitStatusr/w

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.59

fsMIY1731MepTransmitLmmResultOK

Indicates the result of the operation:

- true The Loss measurement Message (LMM) will be (or has been) sent.

- false The Loss measurement Message (LMM) will not be sent.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.60

fsMIY1731MepTransmitLmmInterval

Interval between two successive LMM transmissions to be used by the MEP.

FsY1731LmmIntervalr/w

Type Values:

1	interval100ms
2	interval1s
3	interval10s
4	interval1min
5	interval10min

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.61

fsMIY1731MepTransmitLmmDeadline

Specify a timeout, in seconds, before loss measurement exits.
Loss Measurement exits, if configured number of messages are sent
before timeout.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.62

fsMIY1731MepTransmitLmmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.63

fsMIY1731MepTransmitLmmPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.64

fsMIY1731MepTransmitLmmDestMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for LMM.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.65

fsMIY1731MepTransmitLmmDestMepId

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.66

fsMIY1731MepTransmitLmmDestIsMepId

True indicates that MEPID of the target MEP is used for
LM frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Frame Loss Measurement transmission.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.67

fsMIY1731MepTransmitLmmMessages

The number of LMM messages to be transmitted.

Integer32r/w

Constraints:
range: 0-8192

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.68

fsMIY1731MepTxFCf

The counter of in-profile data frames transmitted towards its
peer MEP transmitted in the last CCM or LMM.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.69

fsMIY1731MepRxFCb

The counter of in-profile data frames received from its peer MEP at the
time of receiving the last CCM frame.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.70

fsMIY1731MepTxFCb

The value of fsMIY1731MepTxFCf field in the last CCM or LMR frame
received from its peer MEP.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.71

fsMIY1731MepNearEndFrameLossThreshold

Threshold value for the near-end frame loss.
Notification is sent to Management Application if calculated near-end
frame loss exceeds configured threshold.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.72

fsMIY1731MepFarEndFrameLossThreshold

Threshold value for the far-end frame loss.
Notification is sent to Management Application if calculated far-end
frame loss exceeds configured threshold.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.73

fsMIY1731MepTransmitDmStatus

An Enumerated value set to 'start' to initiate 1DM or DMM transmission
and 'stop' to stop 1DM or DMM transmission.
'ready' and 'notReady' indicates whether 1DM or DMM can be initiated
or not.

Note: Use…

FsY1731TransmitStatusr/w

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.74

fsMIY1731MepTransmitDmResultOK

Indicates the result of the operation:

- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false The Delay measurement Message (1DM or DMM) will not be sent.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.75

fsMIY1731MepTransmitDmType

Type of delay measurement to be initiated:

- oneWay(1) Measurement (by 1DM) is calculated at destination end.
- twoWay(2) Measurement (by DMM-DMR) is calculated at initiation end.

Enumerationr/w

Enumerated Values:

1	oneWay
2	twoWay

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.76

fsMIY1731MepTransmitDmInterval

Interval between two successive DM messages
(1DM or DMM) transmissions to be used by the MEP.

Integer32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.77

fsMIY1731MepTransmitDmMessages

The number of DM (1DM or DMM) messages to be transmitted.

Integer32r/w

Constraints:
range: 0-8192

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.78

fsMIY1731MepTransmitDmmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted DMM frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.79

fsMIY1731MepTransmit1DmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.80

fsMIY1731MepTransmitDmmPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted DMM frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.81

fsMIY1731MepTransmit1DmPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.82

fsMIY1731MepTransmitDmDestMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for 1DM or DMM.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.83

fsMIY1731MepTransmitDmDestMepId

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.84

fsMIY1731MepTransmitDmDestIsMepId

True indicates that MEPID of the target MEP is used for
Delay frame transmission.

False indicates that unicast destination MAC address of the
target MEP is used for Delay frame transmission.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.85

fsMIY1731MepTransmitDmDeadline

Specify a timeout, in seconds, before Delay Measurement operation exits.
Delay Measurement operation exits, if configured number of messages are
sent before timeout.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.86

fsMIY1731MepDmrOptionalFields

Indicates whether to include optional fields in the DMR Frame or not.
True indicates optional fields are to be included and False indicates
optional fields are not included.

Optional fields are included …

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.87

fsMIY1731Mep1DmRecvCapability

The administrative status of 1DM Frame reception. This enables
or disables the capability of MEP to process the 1DM Frames.
A value of 'enabled' (1) indicates to accept and process 1DM Frames.
A value of 'disabled' (2…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.88

fsMIY1731MepFrameDelayThreshold

Threshold (in microseconds) for the Frame delay.
Notification is sent to Management application if calculated frame delay
exceeds configured threshold.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.89

fsMIY1731MepAisCapability

The administrative status of AIS capability.This enables or disables
transmission of AIS frames.

A value of 'enabled' (1) indicates AIS frames will be transmitted when
MEP is in AIS/LCK condition det…

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.90

fsMIY1731MepAisCondition

Indicates MEP is in AIS condition.
AIS condition occurs when it receives an AIS frame.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.91

fsMIY1731MepAisInterval

Interval between two successive AIS transmissions.

FsY1731AisLckIntervalr/w

Type Values:

1	interval1s
2	interval1min

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.92

fsMIY1731MepAisPeriod

Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability)
is enabled.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.93

fsMIY1731MepAisPriority

This Mib object is used for configuring AIS Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.

For Ethernet:
The Priority is a 3-bit priority value to be used in the VLAN tag,
if pre…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.94

fsMIY1731MepAisDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted AIS frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.95

fsMIY1731MepAisDestIsMulticast

An Enumerated value set to indicate the type of AIS transmission,
unicast or multicast.
'true' indicates that AIS(s) are to be transmitted as multicast,
'false' indicates that AIS(s) are to be transmitted as unicast.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.96

fsMIY1731MepAisClientMacAddress

A unicast destination MAC address of the Client MEP to which AIS frame
is to send.

This object is not supported on MEPs created over MPLS-TP networks, as
these networks do not operate based on MAC Addres…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.97

fsMIY1731MepLckDestIsMulticast

An Enumerated value set to indicate the type of LCK transmission,
unicast or multicast.
'true' indicates that LCK signals are to be transmitted as multicast,
'false' indicates that LCK signals are to be transmitted as …

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.98

fsMIY1731MepLckClientMacAddress

A unicast destination MAC address of the Client MEP to which AIS frame
is to send.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.99

fsMIY1731MepLckCondition

Indicates if MEP is in LCK condition.
LCK condition occurs when it receives a LCK frame.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.100

fsMIY1731MepLckInterval

Interval between two successive LCK transmissions to be
used by the MEP.

FsY1731AisLckIntervalr/w

Type Values:

1	interval1s
2	interval1min

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.101

fsMIY1731MepLckPeriod

Time period (in seconds) for which LCK messages are to be
transmitted.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.102

fsMIY1731MepLckPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LCK frame.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.103

fsMIY1731MepLckDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LCK frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.104

fsMIY1731MepLckDelay

When a MEP is set as locked (for out-of-service operations), data traffic through
that MEP will be blocked after this delay.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.105

fsMIY1731MepDefectConditions

A vector of Boolean indicates the defect conditions.

FsY1731MepDefects

Type Values:

0	none
1	bDefRdiCondition
2	bDefLossOfContinuity
3	bDefUnexpectedPeriod
4	bDefUnexpectedMep
5	bDefMisMerge
6	bDefUnexpectedMegLevel
7	bDefLocalLinkFailure
8	bDefInternalHWFailure
9	bDefInternalSWFailure
10	bDefAisCondition
11	bDefLckCondition

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.106

fsMIY1731MepUnicastCcmMacAddress

Unicast MacAddress used for performance monitoring through Continuity
Check Messages.

Continuity Check Messages are to be transmitted as multicast frames
incase this object contains NULL value.
…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.107

fsMIY1731MepRowStatus

Indicates the status of MEP row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible values are row status ac…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.108

fsMIY1731MepRxFCf

The value of fsMIY1731MepRxFCf field is the value of in-profile data frames
received from its peer MEP.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.109

fsMIY1731Mep1DmTransInterval

Time interval (in 0.01 seconds) between two successive One-way DM Transactions
and is used to carry out Delay Variation Measurement for
1DM transactions.
The value '0' indicates One-way Delay Variation measurement canno…

Integer32r/w

Constraints:
range: 0-1500

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.110

fsMIY1731MepTransmitThDestMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Throughput Measurement.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.111

fsMIY1731MepTransmitThDestMepId

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.112

fsMIY1731MepTransmitThDestIsMepId

True indicates that MEPID of the target MEP is used for
Throughput Measurement.
False indicates that unicast destination MAC address of the
target MEP is used for Throughput Measurement.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.113

fsMIY1731MepTransmitThMessages

The number of Throughput messages (LBM / TST) to be transmitted.

Integer32r/w

Constraints:
range: 0-8192

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.114

fsMIY1731MepTransmitThPps

The number of Throughput messages being transmitted in a second.
It is used to calculate the time interval between two successive
message transmission. It's default value is 100 packets per sec.

Unsigned32r/w

Constraints:
range: 1-100000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.115

fsMIY1731MepTransmitThDeadline

Specify a timeout, in seconds, before Throughput Measurement operation exits.
Throughput Measurement operation exits, if configured number of messages are
sent before timeout.

Unsigned32r/w

Constraints:
range: 0-172800

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.116

fsMIY1731MepTransmitThType

Type of Throughput measurement to be initiated:

- oneWay(1) Measurement (by TST) is calculated at initiation end with
the use of VSM PDUs.
- twoWay(2) Measurement (by LBM-LBR) is calculated at initi…

Enumerationr/w

Enumerated Values:

1	oneWay
2	twoWay

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.117

fsMIY1731MepTransmitThStatus

An Enumerated value set to 'start' to initiate Throughput transaction
and 'stop' to stop Throughput transaction.
'ready' and 'notReady' indicates whether Throughput transaction can be initiated or not.

N…

FsY1731TransmitStatusr/w

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.118

fsMIY1731MepTransmitThFrameSize

Indicates the initial total packet size configured by the user
including the Test TLV of the (LBM / TST) message.

Maximum frame size supported by ECFM is 9K,
following is the calculation for the maximum…

Unsigned32r/w

Constraints:
range: 64-9000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.119

fsMIY1731MepTransmitThBurstMessages

The number of Throughput messages (LBM / TST) to be transmitted in a
burst.

Integer32r/w

Constraints:
range: 0-8192

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.120

fsMIY1731MepTransmitThBurstDeadline

Specify the time period, in milliseconds, for which a burst exists (LB Burst
/ TST Burst ).

Unsigned32r/w

Constraints:
range: 0-172800000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.121

fsMIY1731MepTransmitThBurstType

Throughput Burst can be initiated as:

- burstMessages(1) Number of Throughput messages (LBM / TST) to be
transmitted in a burst.

- burstDeadline(2) Timeout, in seconds, before single …

Enumerationr/w

Enumerated Values:

1	burstMessages
2	burstDeadline

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.122

fsMIY1731MepTransmitThTestPatternType

Indicates the type of the pattern to be included in the test TLV of
Throughput frame(LBM/TST PDU) .
TestTlvPattern Types can be:
patternNullSignalWithoutCRC32(0) Pattern contains null signal without
…

FsY1731TestTlvPatternTyper/w

Type Values:

0	patternNullSignalWithoutCRC32
1	patternNullSignalWithCRC32
2	patternPRBSWithoutCRC32
3	patternPRBSWithCRC32

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.123

fsMIY1731MepThVerifiedBps

This indicates the verified throughput value.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.124

fsMIY1731MepThUnVerifiedBps

This indicates the throughput value under verification. This is the
throughput value for which verification is still to be performed.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.125

fsMIY1731MepTransmitLbmMode

LBMs can be initiated as:

- burst(1) Lbms are initiated without waiting for the reception of
LBR PDUs.

- requestResponse(2) After initiating the Lbm wait for the
reception of Lbr o…

Enumerationr/w

Enumerated Values:

1	burst
2	requestResponse

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.126

fsMIY1731MepLbmOut

Number of LBM messages transmitted.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.127

fsMIY1731MepTransmitLbmTimeout

Time for all the replies (LBR) of LBMs to be received by
the MEP.No reply (LBR) would be entertained thereafter (timeout).

Integer32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.128

fsMIY1731MepTstCapability

The administrative status of Tst capability.
This enables or disables capability of MEP to initiate and process
Tst operation.
A value of 'enabled' (1) indicates to initiate as well as process TST.
A value of 'disabl…

FsY1731EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.129

fsMIY1731MepTransmitThResultOK

Indicates the result of Th transaction,
- true The TH Message(s) will be
(or has been) sent.
- false The TH Message(s) will not
be sent due to some internal problem.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.130

fsMIY1731MepThVerifiedFrameSize

Indicates the Frame Size with which verified Throughput is achieved

Unsigned32

Constraints:
range: 0-9000

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.131

fsMIY1731MepAisOffload

The administrative MEP AIS Offloading status.
When value 'enabled' (1) is set, the AIS Offloading is enabled for the
MEP. When value 'disabled' (2) is set, the AIS Offloading will be
disabled for the MEP. By Default …

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.132

fsMIY1731MepLbmTTL

This object specifies the time-to-live(TTL) value to be used in the
MPLS outer label header when loopback connectivity verification (ping)
or diagnostic tests has to be performed to a MEP/MIP in the MPLS-TP
network.
…

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.133

fsMIY1731MepLbmIcc

This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC
based MPLS-TP network for which loopback connectivity verification
(ping) or diagnostic tests has to be initiated.

The ICC code con…

OctetStringr/w

Constraints:
range: 0-6

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.134

fsMIY1731MepLbmNodeId

This object specifies the Node Id of the specific MIP node in MPLS-TP
network for which loopback connectivity verification(ping) or diagnostic
tests has to be initiated.

This must be interpreted in conju…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.135

fsMIY1731MepLbmIfNum

This object specifies the Interface Number of the specific MIP node in
MPLS-TP network for which loopback connectivity verification(ping) or
diagnostic tests has to be initiated.

Per Interface MIP is id…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.136

fsMIY1731ErrorLogTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.5 · 1 row entry · 4 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731ErrorLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731ErrorLogTable'

The Error Log table.
Size of this table is defined by the object fsMIY1731ErrorLogSize.
If the addition of an error entry would exceed the 
resources allocated to table, then the oldest entries in the table are 
deleted until sufficient resources are available to hold the new
error entry.
          
Each row in the table represents error or defect
detected by a specific MEP.
This table uses three indices. The first four are the indices of MEP
table the reason being that a error or defect can only
be detected by MEP.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731ErrorLogEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.5.1

The Error Log Table.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731ErrorLogSeqNumber

Column Syntax OID

fsMIY1731ErrorLogSeqNumber

Locally maintained sequence number of Error Log Entries

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.5.1.1

fsMIY1731ErrorLogTimeStamp

Identifies the time at which error or defect is
detected by a MEP.

SNMPv2-TCTimeStamp

Based On: SNMPv2-SMITimeTicks

Description:

The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…

.1.3.6.1.4.1.10876.101.2.7.1.2.5.1.2

fsMIY1731ErrorLogType

Indicates the type of error or defect detected by MEP.
Type of errors/defects are:
bDefRdiCondition,
bDefLossOfContinuity,
bDefUnexpectedPeriod,
bDefUnexpectedMep,
bDefMisMerge,
bDefUnexpectedMegLevel,
bDefLocalLinkFail…

FsY1731ErrorLogType

Type Values:

1	logRdiConditionEntry
2	logLossOfContinuityEntry
3	logUnexpectedPeriodEntry
4	logUnexpectedMepEntry
5	logMisMergeEntry
6	logUnexpectedMegLevelEntry
7	logLocalLinkFailureEntry
8	logInternalHWFailureEntry
9	logInternalSWFailureEntry
10	logAisConditonEntry
11	logLckConditionEntry
12	logRdiConditionExit
13	logLossOfContinuityExit
14	logUnexpectedPeriodExit
15	logUnexpectedMepExit
16	logMisMergeExit
17	logUnexpectedMegLevelExit
18	logLocalLinkFailureExit
19	logInternalHWFailureExit
20	logInternalSWFailureExit
21	logAisConditonExit
22	logLckConditionExit

.1.3.6.1.4.1.10876.101.2.7.1.2.5.1.3

fsMIY1731ErrorLogRMepIdentifier

Identifies the specific remote MEP due to which defect is detected.
Zero indicates that no remote MEP contributes for the occurence of
defect.

IEEE8021-CFM-MIBDot1agCfmMepIdOrZero

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.5.1.4

fsMIY1731LtrTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.6 · 1 row entry · 3 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731LtrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731LtrTable'

This table extends the MEP table and contains a list of
Linktrace replies received by a specific MEP in response to
a linktrace message.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LtrEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.6.1

The Linktrace Reply table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LtrSeqNumber fsMIY1731LtrReceiveOrder

Column	Syntax	OID
fsMIY1731LtrSeqNumber Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.6.1.1`
fsMIY1731LtrReceiveOrder An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. fsMIY1731LtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs.	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.6.1.2`
fsMIY1731LtrReceiveTime Indicates the time taken to receive a LTR in response to a transmitted LTM.	SNMPv2-TCTimeInterval Type Constraints: `range: 0..2147483647` Description: A period of time, measured in units of 0.01 seconds.	`.1.3.6.1.4.1.10876.101.2.7.1.2.6.1.3`

fsMIY1731LbmTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.7 · 1 row entry · 13 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731LbmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731LbmTable'

This table extends the MEP table and contains information of
Loopback messages sent by a specific MEP.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LbmEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.7.1

The Loopback Message table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LbmTransId fsMIY1731LbmSeqNumber

Column Syntax OID

fsMIY1731LbmTransId

Transaction Identifier identifies a loopback or ping (LBM)transaction.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.1

fsMIY1731LbmSeqNumber

Sequence number returned by a previous transmit loopback message,
indicating which LBM's response is going to be returned.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.2

fsMIY1731LbmBytesSent

The size (in bytes) of the LBM transmitted.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.3

fsMIY1731LbmTargetMacAddress

Mac Address of the target MP (MEP or MIP) to which LBM has been sent.
For multicast LBM this object should not be considered.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.4

fsMIY1731LbmUnexptedLbrIn

The Number of unexpected Lbrs Received.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.5

fsMIY1731LbmDuplicatedLbrIn

The Number of Duplicated Lbrs Received.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.6

fsMIY1731LbmNumOfResponders

The Number of Responders which have sent the reply (LBR)
for the initiated LBM.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.7

fsMIY1731LbmDestType

Indicates the type (i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network)) of the
destination for which LBM was sent.

FsY1731DestType

Type Values:

0	unicast
1	mepid
2	multicast
3	mipid

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.8

fsMIY1731LbmDestMepId

Target MEP ID to which LBM was sent.

IEEE8021-CFM-MIBDot1agCfmMepIdOrZero

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.9

fsMIY1731LbmIcc

This object specifies the ICC of the MIP node in ICC
based MPLS-TP network for which LBM was sent.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.10

fsMIY1731LbmNodeId

This object specifies the Node Id of the specific MIP node in MPLS-TP
network for which LBM was sent.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.11

fsMIY1731LbmIfNum

This object specifies the Interface Number of the specific MIP node in
MPLS-TP network for which LBM was sent.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.12

fsMIY1731LbmTTL

This object specifies the time-to-live(TTL) value used in the
MPLS outer label header in the LBM which was sent.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.7.1.13

fsMIY1731LbrTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.8 · 1 row entry · 10 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731LbrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731LbrTable'

This table extends the MEP table and contains a list of
Loopback replies received by a specific MEP in response to
a loopback message.
          
Size of this table is defined by the object fsMIY1731LbrCacheSize.
If the addition of a loopback reply entry would exceed the 
resources allocated to table, then the oldest entries in the table are 
deleted until sufficient resources are available to hold the new
loopback reply entry.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LbrEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.8.1

The Loopback Reply table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LbmTransId fsMIY1731LbrSeqNumber fsMIY1731LbrReceiveOrder

Column Syntax OID

fsMIY1731LbrSeqNumber

Sequence number received in the Loopback reply.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.1

fsMIY1731LbrReceiveOrder

Order in which LBRs are received for a same Sequence Number field
value.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.2

fsMIY1731LbrResponderMacAddress

The Mac Address of the MP which has sent the response for the
LBM.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.3

fsMIY1731LbrReceiveTime

Time taken to receive a LBR in response to the
transmitted LBM.

SNMPv2-TCTimeInterval

Type Constraints:
range: 0..2147483647

Description:

A period of time, measured in units of 0.01 seconds.

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.4

fsMIY1731LbrErrorType

Indicates that received loobback reply is errored one.
bit 0 indicates bad MSDU (when data in the LBR does not match what was
sent in the LBM)
bit 1 indicates bit errored LBR (LBR is with bit errors)

FsY1731LbrErrType

Type Values:

0	none
1	badMacServiceDataUnit
2	crc32CheckFailure

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.5

fsMIY1731LbrDestType

Indicates the Type ((i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network)) of the
destination from which LBR was received.

FsY1731DestType

Type Values:

0	unicast
1	mepid
2	multicast
3	mipid

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.6

fsMIY1731LbrDestMepId

MEP which has sent the response for the LBM.

IEEE8021-CFM-MIBDot1agCfmMepIdOrZero

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.7

fsMIY1731LbrICC

This object specifies the ICC of the MIP node in ICC
based MPLS-TP network from which LBR was received.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.8

fsMIY1731LbrNodeId

This object specifies the Node Id of the specific MIP node in MPLS-TP
network from which LBR was received.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.9

fsMIY1731LbrIfNum

This object specifies the Interface Number of the specific MIP node in
MPLS-TP network from which LBR was received.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.8.1.10

fsMIY1731LbStatsTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.9 · 1 row entry · 7 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731LbStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731LbStatsTable'

This table extends the MEP table and contains output of loopback 
or ping transaction. 
Output includes number of replies recieved, time taken for a reply to
come.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIY1731LbStatsEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.9.1

The Loopback Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731LbmTransId

Column	Syntax	OID
fsMIY1731LbStatsLbmOut Number of LBMs sent in a loopback or ping transaction.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.9.1.1`
fsMIY1731LbStatsLbrIn Number of replies (LBR) received in a loopback or ping transaction.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.9.1.2`
fsMIY1731LbStatsLbrTimeAverage Average time taken to receive the replies (LBR) for the current loopback or ping transaction.	SNMPv2-TCTimeInterval Type Constraints: `range: 0..2147483647` Description: A period of time, measured in units of 0.01 seconds.	`.1.3.6.1.4.1.10876.101.2.7.1.2.9.1.3`
fsMIY1731LbStatsLbrTimeMin Minimum time taken to receive the replies (LBR) for the current loopback or ping transaction.	SNMPv2-TCTimeInterval Type Constraints: `range: 0..2147483647` Description: A period of time, measured in units of 0.01 seconds.	`.1.3.6.1.4.1.10876.101.2.7.1.2.9.1.4`
fsMIY1731LbStatsLbrTimeMax Maximum time taken to receive the replies (LBR) for the current loopback or ping transaction.	SNMPv2-TCTimeInterval Type Constraints: `range: 0..2147483647` Description: A period of time, measured in units of 0.01 seconds.	`.1.3.6.1.4.1.10876.101.2.7.1.2.9.1.5`
fsMIY1731LbStatsTotalResponders Total Number of Responders which have sent the reply (LBR) for the initiated LBM.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.9.1.6`
fsMIY1731LbStatsAvgLbrsPerResponder Average Number of LBR(s) received per Responder.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.9.1.7`

fsMIY1731FdTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.10 · 1 row entry · 10 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731FdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731FdTable'

This table extends the MEP table and contains a list of
information about the Frame Delay measured at various times by a 
MEP.
Size of this table is defined by the object
fsMIY1731FrameDelayBufferSize. If the addition of a frame delay entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame delay entry.
          
Delay Measured can be of one-way or two-way.

fsMIY1731FdEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.10.1

The Frame delay buffer table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FdTransId fsMIY1731FdSeqNumber

Column Syntax OID

fsMIY1731FdTransId

Identifies a delay measurement transaction.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.1

fsMIY1731FdSeqNumber

Locally maintained sequence number of FD Entries

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.2

fsMIY1731FdTxTimeStampf

TxTimeStampf value sent in a Delay measurement message (DMM).
or received in 1DM frame.

FsY1731TimeRepresentation

Type Constraints:
range: 8

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.3

fsMIY1731FdMeasurementTimeStamp

Time at which measurement takes place.

SNMPv2-TCTimeStamp

Based On: SNMPv2-SMITimeTicks

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.4

fsMIY1731FdPeerMepMacAddress

Identifies the Mac Address of the peer MEP to which DM message(s)
is sent.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.5

fsMIY1731FdIfIndex

This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge port,
to which the MEP at which measurement takes place is attached.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.6

fsMIY1731FdDelayValue

This object contains the measured frame delay value.

FsY1731TimeRepresentation

Type Constraints:
range: 8

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.7

fsMIY1731FdIFDV

Inter frame delay variation, (IFDV), calculated with respect to
current transaction.

FsY1731TimeRepresentation

Type Constraints:
range: 8

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.8

fsMIY1731FdFDV

Frame delay variation, (IFDV), calculated with respect to current
transaction.

FsY1731TimeRepresentation

Type Constraints:
range: 8

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.9

fsMIY1731FdMeasurementType

Type of the frame-delay measurement (oneWay or twoWay).

Enumeration

Enumerated Values:

1	oneWay
2	twoWay

.1.3.6.1.4.1.10876.101.2.7.1.2.10.1.10

fsMIY1731FdStatsTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.11 · 1 row entry · 8 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731FdStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731FdStatsTable'

This table extends the MEP table and contains output of one-way and 
two-way delay measurement transaction.

fsMIY1731FdStatsEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.11.1

The Delay Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FdTransId

Column	Syntax	OID
fsMIY1731FdStatsTimeStamp Time stamp at which one-way or two-way delay measurement (DMM) is initiated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.1`
fsMIY1731FdStatsDmmOut Number of DMMs sent for a two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.2`
fsMIY1731FdStatsDmrIn Number of requests received for a one-way or responses received for two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.3`
fsMIY1731FdStatsDelayAverage Average delay measured for a one-way or two-way delay measurement transaction.	FsY1731TimeRepresentation Type Constraints: `range: 8`	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.4`
fsMIY1731FdStatsFDVAverage Frame Delay Variation (FDV) average calculated for a delay measurement transaction.	FsY1731TimeRepresentation Type Constraints: `range: 8`	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.5`
fsMIY1731FdStatsIFDVAverage Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction.	FsY1731TimeRepresentation Type Constraints: `range: 8`	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.6`
fsMIY1731FdStatsDelayMin This object contains the minimum value of frame-delay.	FsY1731TimeRepresentation Type Constraints: `range: 8`	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.7`
fsMIY1731FdStatsDelayMax This object contains the maximum value of frame-delay.	FsY1731TimeRepresentation Type Constraints: `range: 8`	`.1.3.6.1.4.1.10876.101.2.7.1.2.11.1.8`

fsMIY1731FlTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.12 · 1 row entry · 8 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731FlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731FlTable'

This table extends the MEP table and contains a information about
the Frame-loss measured at various times by a MEP. 
          
Size of this table is defined by the object
fsMIY1731FrameLossBufferSize. If the addition of a frame loss entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame loss entry.

fsMIY1731FlEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.12.1

The Frame Loss Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FlTransId fsMIY1731FlSeqNumber

Column	Syntax	OID
fsMIY1731FlTransId Identifies a loss measurement transaction.	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.1`
fsMIY1731FlSeqNumber Locally maintained sequence number of Frame Loss Entries	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.2`
fsMIY1731FlMeasurementTimeStamp Time at which frame-loss is actually measured.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.3`
fsMIY1731FlPeerMepMacAddress Identifies the Mac Address of the peer MEP to which loss measurement message(s) is sent.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.4`
fsMIY1731FlIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which measurement takes place is attached.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.5`
fsMIY1731FlFarEndLoss This object contains the far-end frame-loss value.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.6`
fsMIY1731FlNearEndLoss This object contains the near-end frame-loss value.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.7`
fsMIY1731FlMeasurementTime Time taken to measure frame-loss.	SNMPv2-TCTimeInterval Type Constraints: `range: 0..2147483647` Description: A period of time, measured in units of 0.01 seconds.	`.1.3.6.1.4.1.10876.101.2.7.1.2.12.1.8`

fsMIY1731FlStatsTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.13 · 1 row entry · 10 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731FlStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731FlStatsTable'

This table extends the MEP table and contains output of 
frame-loss measurement transaction.

fsMIY1731FlStatsEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.13.1

The Frame Loss Statistics table entry.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731FlTransId

Column Syntax OID

fsMIY1731FlStatsTimeStamp

Time stamp at which frame-loss measurement transaction is initiated.

SNMPv2-TCTimeStamp

Based On: SNMPv2-SMITimeTicks

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.1

fsMIY1731FlStatsMessagesOut

Number of frames with ETH-LM information sent for a transaction.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.2

fsMIY1731FlStatsMessagesIn

Number of frames with ETH-LM information received for a
transaction.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.3

fsMIY1731FlStatsFarEndLossAverage

Average of the far-end frame-loss measured for a transaction.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.4

fsMIY1731FlStatsNearEndLossAverage

Average of the near-end frame-loss measured for a transaction.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.5

fsMIY1731FlStatsMeasurementType

Type of the frame-loss measurement (Single-ended or Dual-ended) done.

Enumeration

Enumerated Values:

1	singleEnded
2	dualEnded

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.6

fsMIY1731FlStatsFarEndLossMin

This object contains the minimum value of far-end frame-loss.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.7

fsMIY1731FlStatsFarEndLossMax

This object contains the maxmium value of far-end frame-loss.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.8

fsMIY1731FlStatsNearEndLossMin

This object contains the minimum value of near-end frame-loss.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.9

fsMIY1731FlStatsNearEndLossMax

This object contains the maxmium value of near-end frame-loss.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.13.1.10

fsMIY1731MplstpExtRemoteMepTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.14 · 1 row entry · 3 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731MplstpExtRemoteMepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731MplstpExtRemoteMepTable'

The Remote Maintenance End Point table for the Y.1731 extensions
over MPLS-TP networks.
Each row in the table realizes an ME for the MPLS-TP networks using
the local and remote MEP identifiers which are indices to the table.
This table is mainly used to associate a specific LSP/PW to an ME.

This table uses five indices, first index provides the virtual context
identifier in which this entry resides. The second index is the index
to the MEG table identifying the specific MD/Level. Third index is the
index to ME table identifying the specific MEG. The fourth index is
the Local MEP Indentifier. The fifth index is the remote MEP Identifier.

The writable objects in this table need to be persistent upon reboot
or restart of a device.

fsMIY1731MplstpExtRemoteMepEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.14.1

An instance of the Remote Maintenenace End Point table entry used in
Y.1731 based MPLS-TP networks.

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier fsMIY1731MplstpExtRMepIdentifier

Column Syntax OID

fsMIY1731MplstpExtRMepIdentifier

Maintenance End Point Identifier of a Remote MEP associated with the
Local-MEP(fsMIY1731MepIdentifier) which together constitutes an ME.

IEEE8021-CFM-MIBDot1agCfmMepId

Type Constraints:
range: 1..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.14.1.1

fsMIY1731MplstpExtRMepServicePointer

This object identifies the MPLS Transport path which represents the ME.

This object may point to an entry in the mplsTunnelTable, if the value
of the object fsMIEcfmExtMaPrimarySelectorType in fsMIEcfmE…

SNMPv2-TCRowPointerr/w

Description:

Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…

.1.3.6.1.4.1.10876.101.2.7.1.2.14.1.2

fsMIY1731MplstpExtRMepRowStatus

The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.14.1.3

fsMIY1731StatsTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.15 · 1 row entry · 29 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731StatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731StatsTable'

List of per virtual context ECFM-Y1731 Module Statistics.

fsMIY1731StatsEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.15.1

Per virtual context ECFM-Y1731 Module Statistics.

Indexes

fsMIY1731ContextId

Column	Syntax	OID
fsMIY1731AisOut Number of AIS PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.1`
fsMIY1731AisIn Number of AIS PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.2`
fsMIY1731LckOut Number of LCK PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.3`
fsMIY1731LckIn Number of LCK PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.4`
fsMIY1731TstOut Number of TST PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.5`
fsMIY1731TstIn Number of TST PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.6`
fsMIY1731LmmOut Number of LMM PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.7`
fsMIY1731LmmIn Number of LMM PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.8`
fsMIY1731LmrOut Number of LMR PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.9`
fsMIY1731LmrIn Number of LMR PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.10`
fsMIY17311DmOut Number of 1DM PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.11`
fsMIY17311DmIn Number of 1DM PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.12`
fsMIY1731DmmOut Number of DMM PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.13`
fsMIY1731DmmIn Number of DMM PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.14`
fsMIY1731DmrOut Number of DMR PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.15`
fsMIY1731DmrIn Number of DMR PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.16`
fsMIY1731ApsOut Number of APS PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.17`
fsMIY1731ApsIn Number of APS PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.18`
fsMIY1731MccOut Number of MCC PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.19`
fsMIY1731MccIn Number of MCC PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.20`
fsMIY1731VsmOut Number of VSM PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.21`
fsMIY1731VsmIn Number of VSM PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.22`
fsMIY1731VsrOut Number of VSR PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.23`
fsMIY1731VsrIn Number of VSR PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.24`
fsMIY1731ExmOut Number of EXM PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.25`
fsMIY1731ExmIn Number of EXM PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.26`
fsMIY1731ExrOut Number of EXR PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.27`
fsMIY1731ExrIn Number of EXR PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.28`
fsMIY1731TxFailOpcode This object contains the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure trap is generated and the trap contains this value.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.2.7.1.2.15.1.29`

fsMIY1731MepAvailabilityTable

table

.1.3.6.1.4.1.10876.101.2.7.1.2.16 · 1 row entry · 18 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIY1731MepAvailabilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-Y1731-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-Y1731-MI-MIB::fsMIY1731MepAvailabilityTable'

The Maintenance Entity Group End Point (MEP) Availability 
table.
          
Each row in the table is associated with a different MEP. 
          
This table uses three indices. The first two indices are the
indices of the Maintenance Entity Group (MEG) and Maintenance 
Entity (ME) tables, the reason being that a MEP is always 
related to an ME and MEG.
          
The MEP table stores all the managed objects for availability
measurement.
          
The objects which are used to initiate a transaction are to
be set only when the row-status of the table is active.
'fsMIY1731MepTransmit' naming convention is used to isolate 
these objects from the others.

fsMIY1731MepAvailabilityEntry row .1.3.6.1.4.1.10876.101.2.7.1.2.16.1

The MEP Availability table entry

Indexes

fsMIY1731ContextId fsMIY1731MegIndex fsMIY1731MeIndex fsMIY1731MepIdentifier

Column Syntax OID

fsMIY1731MepAvailabilityStatus

An Enumerated value set to 'start' to initiate Avilability Measurement
and 'stop' to stop Availability Measurement.
'ready' and 'notReady' indicates whether Availability Measurement
can be initiated or not.
…

FsY1731TransmitStatusr/w

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.1

fsMIY1731MepAvailabilityResultOK

Indicates the result of the operation:

- true Initiating Availability measurement by sending
LM Message (LMM) is successful.

- false Initiating Availability measurement has f…

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.2

fsMIY1731MepAvailabilityInterval

A time interval much smaller than Deadline,
Interval between two successive LMM transmissions to be used by the MEP
for calculating Availability.

FsY1731AvailabilityIntervalr/w

Type Values:

1	interval100ms
2	interval1s
3	interval10s
4	interval1min
5	interval10min
6	interval30min
7	interval1hour

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.3

fsMIY1731MepAvailabilityDeadline

Specify a timeout, in seconds, the Time interval to conduct
the availability functionality

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.4

fsMIY1731MepAvailabilityLowerThreshold

Availability frame loss ratio threshold, the lower threshold used to define
an interval as available. If far-end loss ratio is lesser than
configured lower threshold, that interval will be declared as available.
Avail…

OctetStringr/w

Constraints:
range: 1-6

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.5

fsMIY1731MepAvailabilityUpperThreshold

Unavailability frame loss ratio threshold, the upper threshold to define
an interval as unavailable. If far-end loss ratio is greater than
configured upper threshold, that interval will be declared as unavailable.
Exam…

OctetStringr/w

Constraints:
range: 1-6

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.6

fsMIY1731MepAvailabilityModestAreaIsAvailable

Defines whether the area between upper and lower
threshold is referred as available or unavailable.

True - If Calculated Frame loss ration falls
between upper and lower threshold,
it wil…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.7

fsMIY1731MepAvailabilityWindowSize

Number of consecutive small time intervals for assessing availability

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.8

fsMIY1731MepAvailabilityDestMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Availability Measurement.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.9

fsMIY1731MepAvailabilityDestMepId

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.10

fsMIY1731MepAvailabilityDestIsMepId

True indicates that MEPID of the target MEP is used for
LMM transmission during Availability Measurement.
False indicates that unicast destination MAC address of the
target MEP is used for LMM transmission during Availa…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.11

fsMIY1731MepAvailabilityType

defStatic indicates that the algorithm for Availability Measurement
is static window algorithm. The availability measurement will be
conducted as per MEF 10.2
(Section 6.9.7. Availability Performance for a Point-to-Po…

FsY1731AvailabilityTyper/w

Type Values:

1	defStatic
2	defSliding

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.12

fsMIY1731MepAvailabilitySchldDownInitTime

Time when Scheduled down time is initiated, denotes the beginning of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the Service Provider.
Init Time shou…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.13

fsMIY1731MepAvailabilitySchldDownEndTime

Time when Scheduled down time is ending, denotes the ending of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the Service Provider.
End Time should be def…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.14

fsMIY1731MepAvailabilityPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.15

fsMIY1731MepAvailabilityDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.16

fsMIY1731MepAvailabilityPercentage

This object contains the percentage of Availability

If fsMIY1731MepAvailabilityType is selected as defStatic,
this object contains the Availability Performance metric
as defined in MEF 10.2
(Section 6.9…

OctetString

Constraints:
range: 1-6

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.17

fsMIY1731MepAvailabilityRowStatus

Indicates the status of MEP Availability Table row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible value…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.2.7.1.2.16.1.18