SUPERMICRO-ECFM-MIB Table View

List of Port related Parameters for ecfm module.

fsEcfmPortEntry row .1.3.6.1.4.1.10876.101.1.150.1.9.1

Port related Parameters for ecfm module.

Indexes

fsEcfmPortIndex

Column	Syntax	OID
fsEcfmPortIndex Identifies the Port.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.150.1.9.1.1
fsEcfmPortLLCEncapStatus Indicates the LLC encapsulation status. If set to true then LLC SNAP header shall be added to the transmitted CFM PDUs. Otherwise, LLC SNAP header shall not be added.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.1.9.1.2
fsEcfmPortModuleStatus The administrative module status of Ethernet CFM module. This enables or disables ECFM in the system. If set to enable, enables the ECFM for a particular port. Otherwise, disables ECFM for a particular port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.150.1.9.1.3
fsEcfmPortTxCfmPduCount Identifies the number of CFM-PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.4
fsEcfmPortTxCcmCount Identifies the number of CCMs transmitted	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.5
fsEcfmPortTxLbmCount Identifies the number of LBMs transmitted	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.6
fsEcfmPortTxLbrCount Identifies the number of LBRs transmitted	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.7
fsEcfmPortTxLtmCount Identifies the number of LTMs transmitted	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.8
fsEcfmPortTxLtrCount Identifies the number of LTRs transmitted	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.9
fsEcfmPortTxFailedCount Identifies the number of CFM-PDU tranmission failed	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.10
fsEcfmPortRxCfmPduCount Identifies the number of CFM-PDUs received	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.11
fsEcfmPortRxCcmCount Identifies the number of CCMs received	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.12
fsEcfmPortRxLbmCount Identifies the number of LBMs received	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.13
fsEcfmPortRxLbrCount Identifies the number of LBRs received	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.14
fsEcfmPortRxLtmCount Identifies the number of LTMs received	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.15
fsEcfmPortRxLtrCount Identifies the number of LTRs received	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.16
fsEcfmPortRxBadCfmPduCount Identifies the number of Bad CFM-PDUs received	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.17
fsEcfmPortFrwdCfmPduCount Identifies the number of CFM-PDUs forwarded	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.18
fsEcfmPortDsrdCfmPduCount Identifies the number of CFM-PDUs discarded	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.1.9.1.19

The Maintenance Intermediate Point (MIP) table.
          
Each row in the table represents a different MIP. 
A MIP consists two MIP Half Functions (MHFs) on a 
single Bridge Port, an Up MHF and a Down MHF.

fsEcfmMipEntry row .1.3.6.1.4.1.10876.101.1.150.1.26.1

The MIP table entry

Indexes

fsEcfmMipIfIndex fsEcfmMipMdLevel fsEcfmMipVid

Column	Syntax	OID
fsEcfmMipIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MIP is attached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.1.150.1.26.1.1
fsEcfmMipMdLevel The Maintenance Domain Level at which MIP is configured.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.150.1.26.1.2
fsEcfmMipVid Vlan Identifier to which MIP is attached.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.10876.101.1.150.1.26.1.3
fsEcfmMipActive Administrative state of the MIP A Boolean indicating the administrative state of the MIP. True indicates that the MIP is to function normally, and false that it is to cease functioning.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.1.26.1.4
fsEcfmMipRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.150.1.26.1.5

It is a list of every distinct {FID, source_address, 
InterfaceIndex} triple from all of the CCMs presented
to all of the Bridge.s MPs. Continuity Check Receivers
since the Bridge was last reset. Entries in the MIP CCM
Database are timed out very slowly, on the order of one day,
so that their information is available for fault isolation long 
after the information is no longer used for frame forwarding.

fsEcfmMipCcmDbEntry row .1.3.6.1.4.1.10876.101.1.150.1.27.1

The MIP CCM DB table entry

Indexes

fsEcfmMipCcmFid fsEcfmMipCcmSrcAddr

Column	Syntax	OID
fsEcfmMipCcmFid The Filtering database id (FID) is the VLAN ID of MEP from which CCM is recieved, that will be used along with source MacAddress for frame forwarding.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.10876.101.1.150.1.27.1.1
fsEcfmMipCcmSrcAddr Mac Address of the MEP from which CCM is recieved.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.150.1.27.1.2
fsEcfmMipCcmIfIndex Index of interface through which CCM is recieved.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.1.150.1.27.1.3

The Dynamic Maintenance Intermediate Point (MIP) Prevention table.
An entry in this table will restrict the automatic creation of 
MIPs for the corresponding index (IfIndex, MD Level and VLAN Id).

fsEcfmDynMipPreventionEntry row .1.3.6.1.4.1.10876.101.1.150.1.29.1

The Dyanamic MIP Prevention table entry.

Indexes

fsEcfmMipIfIndex fsEcfmMipMdLevel fsEcfmMipVid

Column	Syntax	OID
fsEcfmDynMipPreventionRowStatus The status of the row. A row can be created in this table by assigning the value 'createAndGo' for the status object. Every 'active' row indicates that the automatic creation of MIP will be restricted. And an 'active…	Enumerationr/w Enumerated Values: 4 createAndGo 6 destroy	.1.3.6.1.4.1.10876.101.1.150.1.29.1.1

The MEP Database. A database, maintained by every MEP, that
maintains received information about other MEPs in the
Maintenance Domain.

fsEcfmRemoteMepDbExEntry row .1.3.6.1.4.1.10876.101.1.150.2.1.1

The MEP Database table entry.

Indexes

fsEcfmMdIndex fsEcfmMaIndex fsEcfmMepIdentifier fsEcfmRMepIdentifier

Column	Syntax	OID
fsEcfmMdIndex The index to the maintenance domain table.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.1.150.2.1.1.1
fsEcfmMaIndex Identifies the Maintenance association of Remote MEP	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.1.150.2.1.1.2
fsEcfmMepIdentifier Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association End Point. MEP I…	Unsigned32 Constraints: range: 1-8191	.1.3.6.1.4.1.10876.101.1.150.2.1.1.3
fsEcfmRMepIdentifier Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned.	Unsigned32 Constraints: range: 1-8191	.1.3.6.1.4.1.10876.101.1.150.2.1.1.4
fsEcfmRMepCcmSequenceNum Sequence Number of CCM sent by Remote MEP	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.1.1.5
fsEcfmRMepPortStatusDefect A Boolean indicating that the remote MEP is reporting a failure in its Port-Status TLV	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.1.1.6
fsEcfmRMepInterfaceStatusDefect A Boolean indicating that the remote MEP is reporting a failure in its Interface-Status TLV	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.1.1.7
fsEcfmRMepCcmDefect A Boolean indicating that no CCM has been received from the remote MEP for at least (3.25*CCMtime(CCMinterval)) seconds	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.1.1.8
fsEcfmRMepRDIDefect A Boolean indicating that RDI flag is received from the remote MEP	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.1.1.9
fsEcfmRMepMacAddress The MAC address of the remote MEP.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.150.2.1.1.10
fsEcfmRMepRdi State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.1.1.11
fsEcfmRMepPortStatusTlv An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been received, or that nor port status TLV was received in the l…	IEEE8021-CFM-MIBDot1agCfmPortStatusr/w Type Values: 0 psNoPortStateTLV 1 psBlocked 2 psUp	.1.3.6.1.4.1.10876.101.1.150.2.1.1.12
fsEcfmRMepInterfaceStatusTlv An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no CCM has been received, or that no interface status TLV was r…	IEEE8021-CFM-MIBDot1agCfmInterfaceStatusr/w Type Values: 0 isNoInterfaceStatusTLV 1 isUp 2 isDown 3 isTesting 4 isUnknown 5 isDormant 6 isNotPresent 7 isLowerLayerDown	.1.3.6.1.4.1.10876.101.1.150.2.1.1.13
fsEcfmRMepChassisIdSubtype This object specifies the format of the Chassis ID received in the last CCM.	LLDP-MIBLldpChassisIdSubtyper/w Type Values: 1 chassisComponent 2 interfaceAlias 3 portComponent 4 macAddress 5 networkAddress 6 interfaceName 7 local	.1.3.6.1.4.1.10876.101.1.150.2.1.1.14
fsEcfmMepDbChassisId The Chassis ID. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object.	LLDP-MIBLldpChassisIdr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.10876.101.1.150.2.1.1.15
fsEcfmRMepManAddressDomain The TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CCM. Received in the CCM Sender ID TLV from that system. …	SNMPv2-TCTDomainr/w Description: Denotes a kind of transport service. Some possible values, such as snmpUDPDomain, are defined in the SNMPv2-TM MIB module. Other possible values are defined in other MIB modules.	.1.3.6.1.4.1.10876.101.1.150.2.1.1.16
fsEcfmRMepManAddress The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object fsEcfmRMepManAddressDomain contains the…	SNMPv2-TCTAddressr/w Type Constraints: range: 1..255 Description: Denotes a transport service address. A TAddress value is always interpreted within the context of a TDomain value. Thus, each definition of a TDomain value must be accompanied by a definition of a textual co…	.1.3.6.1.4.1.10876.101.1.150.2.1.1.17

This table contains a list of parameters with which the linktrace
messages were transmitted/initiated by MEP

fsEcfmLtmEntry row .1.3.6.1.4.1.10876.101.1.150.2.2.1

The Linktrace Message table entry.

Indexes

fsEcfmMdIndex fsEcfmMaIndex fsEcfmMepIdentifier fsEcfmLtmSeqNumber

Column	Syntax	OID
fsEcfmLtmSeqNumber Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.1.150.2.2.1.1
fsEcfmLtmTargetMacAddress The Target MAC Address of MP for which LTM has been initiated : A unicast destination MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.150.2.2.1.2
fsEcfmLtmTtl The LTM TTL field, with which LTM has been initiated. The TTL field indicates the number of hops expected to be covered by the LTM, decremented by 1 by each Linktrace Responder that handles the LTM. The value received …	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.150.2.2.1.3

The Maintenance Association End Point (MEP) table.
          
Each row in the table represents a different MEP.  A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses.  It is an end point of a
single Maintenance Association, and is an endpoint of a
separate Maintenance Entity for each of the other MEPs in
the same Maintenance Association (802.1ag clause 3.18).
          
This table uses three indices. The first two indices are the
indices of the Maintenance Domain and MA tables, the reason
being that a MEP is always related to an MA and Maintenance
Domain.

fsEcfmMepExEntry row .1.3.6.1.4.1.10876.101.1.150.2.3.1

The MEP Database table entry.

Indexes

fsEcfmMdIndex fsEcfmMaIndex fsEcfmMepIdentifier

Column	Syntax	OID
fsEcfmXconnRMepId MEP Identifier of the Remote MEP which caused the cross-connect defect, 0 indicates that no remote MEP is cross-connected.	Unsigned32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.10876.101.1.150.2.3.1.1
fsEcfmErrorRMepId MEP Identifier of the Remote MEP which caused the error CCM defect, 0 indicates that no errored CCM is recieved from any remote MEP.	Unsigned32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.10876.101.1.150.2.3.1.2
fsEcfmMepDefectRDICcm A Boolean indicating the aggregate health of the remote MEPs. True indicates that at least one of the Remote MEP state machines is receiving valid CCMs from its remote MEP that have the RDI bit set, and false that no R…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.3.1.3
fsEcfmMepDefectMacStatus A Boolean indicating that one or more of the remote MEPs is reporting a failure in its Port Status TLV or Interface Status TLV .	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.3.1.4
fsEcfmMepDefectRemoteCcm A Boolean indicating the aggregate state of the Remote MEP state machines. True indicates that at least one of the Remote MEP state machines is not receiving valid CCMs from its remote MEP, and false that all Remote ME…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.3.1.5
fsEcfmMepDefectErrorCcm A Boolean flag set and cleared by the Remote MEP Error state machine to indicate that one or more invalid CCMs has been received, and that 3.5 times that CCM.s transmission interval has not yet expired.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.3.1.6
fsEcfmMepDefectXconnCcm A Boolean flag set and cleared by the MEP Cross Connect state machine to indicate that one or more crossconnect CCMs has been received, and that 3.5 times of at least one of those CCMs. transmission interval has not yet…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.150.2.3.1.7
fsEcfmMepCcmOffload The administrative MEP CCMOffloading status. when value 'enabled' (1) is set The CCM Offloading starts for the MEP in the system.when value 'disabled' (2) is set then CCMOffloading will disabled for the MEP in system.…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.150.2.3.1.8
fsEcfmMepLbrIn Total number of valid, in-order Loopback Replies received.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.3.1.9
fsEcfmMepLbrInOutOfOrder The total number of valid, out-of-order Loopback Replies received.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.3.1.10
fsEcfmMepLbrBadMsdu (optional) The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.3.1.11
fsEcfmMepUnexpLtrIn The total number of unexpected LTRs received (20.39.1).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.3.1.12
fsEcfmMepLbrOut Total number of Loopback Replies transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.3.1.13
fsEcfmMepCcmSequenceErrors The total number of out-of-sequence CCMs received from all remote MEPs.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.3.1.14
fsEcfmMepCciSentCcms Total number of Continuity Check messages transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.150.2.3.1.15

The Maintenance Domain table. Each row in the table
represents a different Maintenance Domain. A Maintenance Domain
is described in 802.1ag (3.22) as the network or the part of the
network for which faults in connectivity are to be managed. The
boundary of a Maintenance Domain is defined by a set of DSAPs, 
each of which can become a point of connectivity to a service
instance.

fsEcfmMdExEntry row .1.3.6.1.4.1.10876.101.1.150.2.4.1

The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage.

Indexes

fsEcfmMdIndex

Column	Syntax	OID
fsEcfmMepArchiveHoldTime Number of minutes that data from a remote MEP is kept before it is purged.	Integer32r/w Constraints: range: 100-65535	.1.3.6.1.4.1.10876.101.1.150.2.4.1.1

The Maintenance Association table.  Each row in the table
represents an MA.  An MA is a set of MEPs, each configured
with a single service instance.
          
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs.  Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity.  The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance.  Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances.  A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.17 and 18.2).
          
This table uses two indices, first index is the index of the
Maintenance Domain table.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.

fsEcfmMaExEntry row .1.3.6.1.4.1.10876.101.1.150.2.5.1

The MA table entry.

Indexes

fsEcfmMdIndex fsEcfmMaIndex

Column	Syntax	OID
fsEcfmMaCrosscheckStatus The administrative status of MA Crosscheck . This enables or disables cross checking between the list of configured remote maintenance end points (MEPs)of a domain and MEPs learned through continuity check messages (CC…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.150.2.5.1.1