SUPERMICRO-ECFM-EXT-MI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
82

fsMIEcfmExtStackTable

table
.1.3.6.1.4.1.10876.101.2.13.1.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIEcfmExtStackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-EXT-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-EXT-MI-MIB::fsMIEcfmExtStackTable' 
There is one CFM Stack table per bridge. It permits
the retrieval of information about the Maintenance Points
configured on any given interface.
fsMIEcfmExtStackEntry row .1.3.6.1.4.1.10876.101.2.13.1.1.1.1
The Stack table entry
Indexes
Column Syntax OID
fsMIEcfmExtStackIfIndex
This object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured.

Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable, and …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.1
fsMIEcfmExtStackServiceSelectorType
Type of the Service Selector identifier indicated by
fsMIEcfmStackServiceSelectorOrNone. See textual convention
ServiceSelectorType for details.
ServiceSelectorType
Type Values:
1vlanId
2isid
3mplsTunnelLsp
4mplsPseudoWire
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.2
fsMIEcfmExtStackServiceSelectorOrNone
Service Selector identifier to which the MP is attached, or 0, if none.
See textual convention ServiceSelectorValue for details.
ServiceSelectorValueOrNone
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.3
fsMIEcfmExtStackMdLevel
MD Level of the Maintenance Point.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMDLevel
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.4
fsMIEcfmExtStackDirection
Direction in which the MP faces on the Bridge Port
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMpDirection
Type Values:
1down
2up
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.5
fsMIEcfmExtStackMdIndex
The index of the Maintenance Domain in the fsMIEcfmMdTable
to which the MP is associated, or 0, if none.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.6
fsMIEcfmExtStackMaIndex
The index of the MA in the fsMIEcfmExtMaTable to which the MP
is associated, or 0, if none.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.7
fsMIEcfmExtStackMepId
If an MEP is configured, the MEPID, else 0
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMepIdOrZero
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.8
fsMIEcfmExtStackMacAddress
MAC address of the MP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.2.13.1.1.1.1.9

fsMIEcfmExtConfigErrorListTable

table
.1.3.6.1.4.1.10876.101.2.13.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIEcfmExtConfigErrorListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-EXT-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-EXT-MI-MIB::fsMIEcfmExtConfigErrorListTable' 
The CFM Configuration Error List table provides a list of
Interfaces and VIDs that are incorrectly configured.
fsMIEcfmExtConfigErrorListEntry row .1.3.6.1.4.1.10876.101.2.13.1.1.2.1
The Config Error List Table entry
Indexes
Column Syntax OID
fsMIEcfmExtConfigErrorListSelectorType
Type of the Service Selector identifier indicated by
fsMIEcfmExtConfigErrorListSelectorType. See textual
convention ServiceSelectorType for details.
ServiceSelectorType
Type Values:
1vlanId
2isid
3mplsTunnelLsp
4mplsPseudoWire
 .1.3.6.1.4.1.10876.101.2.13.1.1.2.1.1
fsMIEcfmExtConfigErrorListSelector
The Service Selector Identifier of the Service with interfaces
in error. See ServiceSelectorValue for details.
ServiceSelectorValue
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.1.2.1.2
fsMIEcfmExtConfigErrorListIfIndex
This object is the logicl port number of the interface.

Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable so that it indexes the
entry in the interface table…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.2.13.1.1.2.1.3
fsMIEcfmExtConfigErrorListErrorType
A vector of Boolean error conditions from 22.2.4, any of
which may be true:

0) CFMleak;
1) ConflictingVids;
2) ExcessiveLevels;
3) OverlappedLevels.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmConfigErrors
Type Values:
0cfmLeak
1conflictingVids
2excessiveLevels
3overlappedLevels
 .1.3.6.1.4.1.10876.101.2.13.1.1.2.1.4

fsMIEcfmExtMipTable

table
.1.3.6.1.4.1.10876.101.2.13.1.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIEcfmExtMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-EXT-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-EXT-MI-MIB::fsMIEcfmExtMipTable' 
The Maintenance Intermediate Point (MIP) table.
          
Each row in the table represents a different MIP. 
A MIP consists two MIP Half Functions (MHFs) on a 
single Bridge Port, an Up MHF and a Down MHF.
fsMIEcfmExtMipEntry row .1.3.6.1.4.1.10876.101.2.13.1.1.3.1
The MIP table entry
Indexes
Column Syntax OID
fsMIEcfmExtMipIfIndex
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MIP is attached.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.2.13.1.1.3.1.1
fsMIEcfmExtMipMdLevel
The Maintenance Domain Level at which MIP is configured.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.13.1.1.3.1.2
fsMIEcfmExtMipSelectorType
Type of the Primary Service Selector identifier indicated by
fsMIEcfmExtMipPrimarySelector. See textual
convention ServiceSelectorType for details.
ServiceSelectorType
Type Values:
1vlanId
2isid
3mplsTunnelLsp
4mplsPseudoWire
 .1.3.6.1.4.1.10876.101.2.13.1.1.3.1.3
fsMIEcfmExtMipPrimarySelector
Primary Service Selector identifier of a Service Instance to which
MIP is attached. See ServiceSelectorValue for details
ServiceSelectorValue
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.1.3.1.4
fsMIEcfmExtMipActive
Administrative state of the MIP. A Boolean indicating the
administrative state of the MIP. True indicates that the MIP
is to function normally, and false that it is to cease functioning.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.1.3.1.5
fsMIEcfmExtMipRowStatus
The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.2.13.1.1.3.1.6

fsMIEcfmExtDefaultMdTable

table
.1.3.6.1.4.1.10876.101.2.13.1.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIEcfmExtDefaultMdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-EXT-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-EXT-MI-MIB::fsMIEcfmExtDefaultMdTable' 
For each bridge component, the Default MD Level Managed Object
controls MHF creation for VIDs that are not attached to a
specific Maintenance Association Managed Object, and Sender ID
TLV transmission by those MHFs.
          
For each Bridge Port, and for each VLAN ID/ISID whose data can
pass through that Bridge Port, an entry in this table is
used by the algorithm in subclause 22.2.3 only if there is no
entry in the Maintenance Association table defining an MA
for the same VLAN ID/ISID and MD Level as this table's entry, and
on which MA an Up MEP is defined.  If there exists such an
MA, that MA's objects are used by the algorithm in
subclause 22.2.3 in place of this table entry's objects.  The
agent maintains the value of fsMIEcfmExtDefaultMdStatus to
indicate whether this entry is overridden by an MA.
          
When first initialized, the agent creates this table
automatically with entries for all VLAN ID/ISID,
with the default values specified for each object.
          
After this initialization, the writable objects in this
table need to be persistent upon reboot or restart of a
device.
fsMIEcfmExtDefaultMdEntry row .1.3.6.1.4.1.10876.101.2.13.1.2.1.1
The Default MD Level table entry.
Indexes
Column Syntax OID
fsMIEcfmExtDefaultMdPrimarySelectorType
Type of the Primary Service Selector identifier indicated by
fsMIEcfmExtDefaultMdPrimarySelector. See textual
convention ServiceSelectorType for details.
ServiceSelectorType
Type Values:
1vlanId
2isid
3mplsTunnelLsp
4mplsPseudoWire
 .1.3.6.1.4.1.10876.101.2.13.1.2.1.1.1
fsMIEcfmExtDefaultMdPrimarySelector
Primary Service Selector identifier of a Service Instance with
no MA configured. See ServiceSelectorValue for details.
ServiceSelectorValue
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.1.1.2
fsMIEcfmExtDefaultMdStatus
State of this Default MD Level table entry. True if there is
no entry in the Maintenance Association table defining an MA
for the same VLAN ID/ISID and MD Level as this table's entry, and
on which MA an Up MEP is defin…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.1.1.3
fsMIEcfmExtDefaultMdLevel
A value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for the VLAN/ISID to which this entry's objects
apply. If this object has the value -1,…
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMDLevelOrNoner/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.10876.101.2.13.1.2.1.1.4
fsMIEcfmExtDefaultMdMhfCreation
A value indicating if the Management entity can create MHFs
(MIP Half Function) for this VID/ISID at this MD Level. If this
object has the value defMHFdefer, MHF creation for this VLAN/ISID
is controlled by fsMIEcfmExt…
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMhfCreationr/w
Type Values:
1defMHFnone
2defMHFdefault
3defMHFexplicit
4defMHFdefer
 .1.3.6.1.4.1.10876.101.2.13.1.2.1.1.5
fsMIEcfmExtDefaultMdIdPermission
Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MHFs
created by the Default Maintenance Domain. If this object
has the value sendIdDefer, Sender ID TLV tran…
SUPERMICRO-ECFM-MI-MIBFsMIEcfmIdPermissionr/w
Type Values:
1sendIdNone
2sendIdChassis
3sendIdManage
4sendIdChassisManage
5sendIdDefer
 .1.3.6.1.4.1.10876.101.2.13.1.2.1.1.6

fsMIEcfmExtMaTable

table
.1.3.6.1.4.1.10876.101.2.13.1.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIEcfmExtMaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-EXT-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-EXT-MI-MIB::fsMIEcfmExtMaTable' 
The Maintenance Association table.  Each row in the table
represents an MA.  An MA is a set of MEPs, each configured
with a single service instance.
          
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs.  Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity.  The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance.  Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances.  A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.17 and 18.2).
          
This table uses two indices, first index is the index of the
Maintenance Domain table.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.
fsMIEcfmExtMaEntry row .1.3.6.1.4.1.10876.101.2.13.1.2.2.1
The MA table entry.
Indexes
Column Syntax OID
fsMIEcfmExtMaIndex
Index of the MA table fsMIEcfmExtMdMaTableNextIndex needs to
be inspected to find an available index for row-creation.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.1
fsMIEcfmExtMaPrimarySelectorType
Type of the Service Selector identifiers indicated by
fsMIEcfmExtMaPrimarySelectorOrNone. If the service instance is defined by more
than one Service Selector, this parameter also indicates the type of the
fsMIEcfmEx…
ServiceSelectorType
Type Values:
1vlanId
2isid
3mplsTunnelLsp
4mplsPseudoWire
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.2
fsMIEcfmExtMaPrimarySelectorOrNone
Service Selector identifier to which the MP is attached, or 0, if none.
If the MA is associated with more than one VID/ISID, the
fsMIEcfmVlanTable lists them.
ServiceSelectorValueOrNone
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.3
fsMIEcfmExtMaFormat
The type (and thereby format) of the Maintenance Association
Name.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.4
fsMIEcfmExtMaName
The Short Maintenance Association name. The type/format of
this object is determined by the value of the
fsMIEcfmExtMaNameType object.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMaintAssocNamer/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.5
fsMIEcfmExtMaMhfCreation
Indicates if the Management entity can create MHFs (MIP Half
Function) for this MA.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMhfCreationr/w
Type Values:
1defMHFnone
2defMHFdefault
3defMHFexplicit
4defMHFdefer
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.6
fsMIEcfmExtMaIdPermission
Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this MA.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmIdPermissionr/w
Type Values:
1sendIdNone
2sendIdChassis
3sendIdManage
4sendIdChassisManage
5sendIdDefer
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.7
fsMIEcfmExtMaCcmInterval
Interval between CCM transmissions to be used by all MEPs
in the MA.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmCcmIntervalr/w
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.8
fsMIEcfmExtMaNumberOfVids
The number of VIDs associated with the MA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.9
fsMIEcfmExtMaRowStatus
The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.10
fsMIEcfmExtMaCrosscheckStatus
The administrative status of MA Crosscheck .
This enables or disables cross checking between the list of
configured remote maintenance end points (MEPs)of a domain and
MEPs learned through continuity check messages (CC…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.2.13.1.2.2.1.11

fsMIEcfmExtMepTable

table
.1.3.6.1.4.1.10876.101.2.13.1.2.3 · 1 row entry · 46 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIEcfmExtMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-EXT-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-EXT-MI-MIB::fsMIEcfmExtMepTable' 
The Maintenance Association End Point (MEP) table.
          
Each row in the table represents a different MEP.  A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses.  It is an end point of a
single Maintenance Association, and is an endpoint of a
separate Maintenance Entity for each of the other MEPs in
the same Maintenance Association (802.1ag clause 3.18).
          
This table uses three indices. The first two indices are the
indices of the Maintenance Domain and MA tables, the reason
being that a MEP is always related to an MA and Maintenance
Domain.
          
The Transmit Loopback table.  Entries in this table are
created/removed at the same time than entries in the MEP
table are created/removed.
          
The MEP table also stores all the managed objects for sending
LBM and LTM.
          
*LBM Managed objects
          
LBM Managed objects in the MEP table 
enables the management entity to initiate
transmission of Loopback messages.  It will signal the MEP
that it should transmit some number of Loopback messages
and detect the detection (or lack thereof) of the
corresponding Loopback messages.
          
Steps to use entries in this table:
          
1) Wait for fsMIEcfmExtMepTransmitLbmStatus value to be
   'ready'.  To do this do this sequence:
   a. an SNMP GET for both SnmpSetSerialNo and
      fsMIEcfmExtMepTransmitLbmStatus objects (in same SNMP
      PDU).
   b. Check if value for fsMIEcfmExtMepTransmitLbmStatus is
      'ready'
      - if not, wait x seconds, go to step a above.
      - if yes, save the value of SnmpSetSerialNo and go
        to step 2) below
2) Change fsMIEcfmExtMepTransmitLbmStatus value from 'ready' to
   'notReady' to ensure no other management entity will use
   the service. In order to not disturb a possible other NMS
   do this by sending an SNMP SET for both SnmpSetSerialNo 
   and fsMIEcfmExtMepTransmitLbmStatus objects (in same SNMP
   PDU,  and make sure SNmpSetSerialNo is the first varBind).
   For the SnmpSetSerialNo varBind, use the value that you
   obtained in step 1)a.. This ensures that two cooperating
   NMSes will not step on each others toes.
3) Setup the different data to be sent (number of messages,
   optional TLVs,...).
4) Record the current values of fsMIEcfmExtMepLbrIn,
   fsMIEcfmExtMepLbrInOutOfOrder, and fsMIEcfmExtMepLbrBadMsdu.
6) Change fsMIEcfmExtMepTransmitLbmStatus value from 'notReady'
   to 'transmit' to initiate transmission of Loopback
   messages.
7) Check the value of fsMIEcfmExtMepTransmitLbmResultOK to
   find out if the operation was successfully initiated or
   not.
8) Monitor the value of fsMIEcfmExtMepTransmitLbmMessages.
   When it reaches 0, the last LBM has been transmitted.
   Wait an additional 5 seconds to ensure that all LBRs have
   been returned.
9) Compare fsMIEcfmExtMepLbrIn, fsMIEcfmExtMepLbrInOutOfOrder,
   and fsMIEcfmExtMepLbrBadMsdu to their old values from step
   4, above, to get the results of the test.
10) Change the fsMIEcfmExtMepTransmitLbmStatus value back to
   'ready' to allow other management entities to use the
   table.
          
*LTM Managed objects
The LTM Managed objects in the MEP table are used in a manner
similar to that described for LBM transmission, above.  Upon
successfully initiating the transmission, the variables
fsMIEcfmExtMepTransmitLtmSeqNumber and
fsMIEcfmExtMepTransmitLtmEgressIdentifier return the information
required to recover the results of the LTM from the
fsMIEcfmLtrTable.
fsMIEcfmExtMepEntry row .1.3.6.1.4.1.10876.101.2.13.1.2.3.1
The MEP table entry
Indexes
Column Syntax OID
fsMIEcfmExtMepIdentifier
Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
association End Point (3.19).
…
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMepId
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.1
fsMIEcfmExtMepIfIndex
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.

Upon a restart of the system, the system SHAL…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.2
fsMIEcfmExtMepDirection
The direction in which the MEP faces on the Bridge port.

For MEPs that are created over the MPLS TP networks, always the
direction is allowed as Down.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMpDirectionr/w
Type Values:
1down
2up
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.3
fsMIEcfmExtMepPrimaryVidOrIsid
An integer indicating the Primary VID/ISID of the MEP, always
one of the VIDs/ISID assigned to the MEP's MA. The value 0
indicates that either the Primary VID/ISID is that of the
MEP's MA, or that the MEP's MA is assoc…
Unsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.4
fsMIEcfmExtMepActive
Administrative state of the MEP

A Boolean indicating the administrative state of the MEP.

True indicates that the MEP is to function normally, and
false that it is to cease functioning.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.5
fsMIEcfmExtMepFngState
Current state of the MEP Fault Notification Generator
State Machine.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmFngState
Type Values:
1fngReset
2fngDefect
3fngReportDefect
4fngDefectReported
5fngDefectClearing
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.6
fsMIEcfmExtMepCciEnabled
If set to true, the MEP will generate CCM messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.7
fsMIEcfmExtMepCcmLtmPriority
The priority value for CCMs and LTMs transmitted by the MEP.
Default Value in the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default va…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.8
fsMIEcfmExtMepMacAddress
MAC address of the MEP.

For MEPs that do not posses a MAC address this value will be all zeroes.
Such an MEP will be present in the MPLS TP networks.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.9
fsMIEcfmExtMepLowPrDef
An integer value specifying the lowest priority defect
that is allowed to generate fault alarm.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmLowestAlarmPrir/w
Type Values:
1allDef
2macRemErrXcon
3remErrXcon
4errXcon
5xcon
6noXcon
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.10
fsMIEcfmExtMepFngAlarmTime
The time that defects must be present before a Fault Alarm is
issued (fngAlarmTime. 20.33.3) (default 2.5s).
Integer32r/w
Constraints:
range: 250-1000
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.11
fsMIEcfmExtMepFngResetTime
The time that defects must be absent before re-enabling a
Fault Alarm (fngResetTime, 20.33.4) (default 10s).
Integer32r/w
Constraints:
range: 250-1000
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.12
fsMIEcfmExtMepHighestPrDefect
The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmHighestDefectPri
Type Values:
0none
1defRDICCM
2defMACstatus
3defRemoteCCM
4defErrorCCM
5defXconCCM
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.13
fsMIEcfmExtMepDefects
A vector of Boolean error conditions from Table 20-1, any of
which may be true:

DefRDICCM(1)
DefMACstatus(2)
DefRemoteCCM(3)
DefErrorCCM(4)
DefXconCCM(5)
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMepDefects
Type Values:
0bUnUsedBit
1bDefRDICCM
2bDefMACstatus
3bDefRemoteCCM
4bDefErrorCCM
5bDefXconCCM
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.14
fsMIEcfmExtMepErrorCcmLastFailure
The last-received CCM that triggered an DefErrorCCM fault.
OctetString
Constraints:
range: 1-1522
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.15
fsMIEcfmExtMepXconCcmLastFailure
The last-received CCM that triggered a DefXconCCM fault.
OctetString
Constraints:
range: 1-1522
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.16
fsMIEcfmExtMepCcmSequenceErrors
The total number of out-of-sequence CCMs received from all
remote MEPs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.17
fsMIEcfmExtMepCciSentCcms
Total number of Continuity Check messages transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.18
fsMIEcfmExtMepNextLbmTransId
Next sequence number/transaction identifier to be sent in a
Loopback message. This sequence number can be zero because
it wraps around.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.19
fsMIEcfmExtMepLbrIn
Total number of valid, in-order Loopback Replies received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.20
fsMIEcfmExtMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies
received.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.21
fsMIEcfmExtMepLbrBadMsdu
(optional) The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.22
fsMIEcfmExtMepLtmNextSeqNumber
Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.23
fsMIEcfmExtMepUnexpLtrIn
The total number of unexpected LTRs received (20.39.1).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.24
fsMIEcfmExtMepLbrOut
Total number of Loopback Replies transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.25
fsMIEcfmExtMepTransmitLbmStatus
A Enumerated value set to 'transmit'to initiate LBM transmission.
Set to 'ready' or 'notReady' by the MEP Loopback Initiator State Machine.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmTransmitStatusr/w
Type Values:
0ready
1notReady
2transmit
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.26
fsMIEcfmExtMepTransmitLbmDestMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIEcfmExtMepTransmitLbmDestIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.27
fsMIEcfmExtMepTransmitLbmDestMepId
The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the column
fsMIEcfmExtMepTransmitLbmDestIsMep…
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.28
fsMIEcfmExtMepTransmitLbmDestIsMepId
True indicates that MEPID of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.

For MEPs residing o…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.29
fsMIEcfmExtMepTransmitLbmMessages
The number of Loopback messages to be transmitted.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.30
fsMIEcfmExtMepTransmitLbmDataTlv
An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.31
fsMIEcfmExtMepTransmitLbmVlanIsidPriority
Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.

The default value is CCM priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.32
fsMIEcfmExtMepTransmitLbmVlanIsidDropEnable
Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.

For more information about VLAN Drop Enable, please check
IEEE 802.1ad.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.33
fsMIEcfmExtMepTransmitLbmResultOK
Indicates the result of the operation:

- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
be sent.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.34
fsMIEcfmExtMepTransmitLbmSeqNumber
The Loopback Transaction Identifier
(fsMIEcfmExtMepNextLbmTransId) of the first LBM (to be) sent.
The value returned is undefined if
fsMIEcfmExtMepTransmitLbmResultOK is false.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.35
fsMIEcfmExtMepTransmitLtmStatus
A Enumerated value set to 'transmit' to initiate LTM transmission.
Set to 'ready' or 'notReady' by the MEP Linktrace Initiator State
Machine.
SUPERMICRO-ECFM-MI-MIBFsMIEcfmTransmitStatusr/w
Type Values:
0ready
1notReady
2transmit
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.36
fsMIEcfmExtMepTransmitLtmFlags
The flags field for LTMs transmitted by the MEP.
Bitsr/w
Enumerated Values:
0useFDBonly
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.37
fsMIEcfmExtMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIEcfmExtMepTransmitLtmTargetIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.38
fsMIEcfmExtMepTransmitLtmTargetMepId
An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
f…
SUPERMICRO-ECFM-MI-MIBFsMIEcfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.39
fsMIEcfmExtMepTransmitLtmTargetIsMepId
True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.40
fsMIEcfmExtMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each Linktrace Responder that
handles the LTM. The value received in the …
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.41
fsMIEcfmExtMepTransmitLtmResult
Indicates the result of the operation:

- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.42
fsMIEcfmExtMepTransmitLtmSeqNumber
The LTM Transaction Identifier
(fsMIEcfmExtMepLtmNextSeqNumber) of the LTM sent.
The value returned is undefined if
fsMIEcfmExtMepTransmitLtmResult is false.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.43
fsMIEcfmExtMepTransmitLtmEgressIdentifier
Identifies the MEP Linktrace Initiator that is originating,
or the Linktrace Responder that is forwarding, this LTM.
The low-order six octets contain a 48-bit IEEE MAC address
unique to the system in which the MEP Linkt…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.44
fsMIEcfmExtMepRowStatus
The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.45
fsMIEcfmExtMepCcmOffload
The administrative MEP CCMOffloading status.
when value 'enabled' (1) is set The CCM Offloading starts for
the MEP in the system.when value 'disabled' (2) is set then
CCMOffloading will disabled for the MEP in system.…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.2.13.1.2.3.1.46