SUPERMICRO-BGP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
73
Rows
73
Columns
524

fsbgp4PeerExtTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.2 · 1 row entry · 7 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4PeerExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4PeerExtTable'
BGP Peer Extension Table. The entries in the table specifies
the additional features supported for a peer by futureBGP4
Speaker in addition to the features specified as in bgpPeerTable 
(described in  stdbgp4.mib.). All entries in this table can be
configured only if fsbgp4LocalAs has be configured. This table is deprecated 
and corresponding functionality is met using the objects in fsbgp4MpePeerExtTable. If 
configured,this value overrides the values used in fsbgp4MpePeerExtTable MIB object
fsbgp4PeerExtEntry row .1.3.6.1.4.1.10876.101.1.41.2.1
Entry containing information about the additional features supported
for a peer by futureBGP4 Speaker. This object is deprecated and
corresponding functionality is met using the objects in fsbgp4MpePeerExtTable.
If con…
Column Syntax OID
The remote IP address of this entry's BGP peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.2.1.1
This object is used to create or delete a peer. If called with create
and no matching peer exists, then a new peer entry will be created. The
admin status of this newly created peer will be stop. To enable the peer
set …
Enumerationr/w
Enumerated Values:
1create
2delete
.1.3.6.1.4.1.10876.101.1.41.2.1.2
The remote autonomous system number of the Peer. The peer admin status
can be made up only if this object is configured for a valid AS number.
When OPEN message is received from this peer during the BGP Connection
estab…
Unsigned32r/w
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.10876.101.1.41.2.1.3
This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected EBGP peers are allowed.
For the internal …
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.2.1.4
This object specifies how the next hop attribute sent in the update
messages to this peer has to be generated. When the object takes the
value of self,the next Hop attribute will always be the sender Local
Address els…
Enumerationr/w
Enumerated Values:
1automatic
2self
.1.3.6.1.4.1.10876.101.1.41.2.1.5
This object specifies which address should be used as the source address
of the TCP session initiated with the Peer. By default this object takes
value as 0 and the source address of the TCP session is filled by TCP.
Th…
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.2.1.6
This object specifies whether the peer is Client peer or Non-Client
peer. By default, the peer is created as Non-Client Peer.
Enumerationr/w
Enumerated Values:
1nonClient
2client
.1.3.6.1.4.1.10876.101.1.41.2.1.7

fsbgp4MEDTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.3 · 1 row entry · 9 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MEDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MEDTable'
BGP4 MED table. This table contains the MED values that are to
be assigned to routes. This table is deprecated and the corresponding 
functionality is met using objects in fsbgp4MpeMEDTable. If configured,
this value overrides the value used in fsbgp4MpeMEDTable.
fsbgp4MEDEntry row .1.3.6.1.4.1.10876.101.1.41.3.1
Entry containing information about the MED value.
Indexes
Column Syntax OID
fsbgp4MEDIndexdeprecated
This is the index to the table. Any entry in the table can be
configured only if fsbgp4LocalAs is set.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.3.1.1
The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.10876.101.1.41.3.1.2
The remote autonomous system with which this entry is associated.
A value of zero indicates that this entry is not valid and will not
be matched for when the MED value for an update is calculated.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.3.1.3
An IP address prefix in the Network Layer Reachability Information
field in updates. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calculated.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.3.1.4
Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calcul…
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.3.1.5
Comma seperated list of AS numbers that are to
be checked against the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.3.1.6
The direction of the update with which the entry is to be associated.
Enumerationr/w
Enumerated Values:
1in
2out
.1.3.6.1.4.1.10876.101.1.41.3.1.7
fsbgp4MEDValuedeprecated
The value assigned to the MED Attribute for the route present in NLRI
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.10876.101.1.41.3.1.8
This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received.
Enumerationr/w
Enumerated Values:
1false
2true
.1.3.6.1.4.1.10876.101.1.41.3.1.9

fsbgp4LocalPrefTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.4 · 1 row entry · 9 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4LocalPrefTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4LocalPrefTable'
BGP Local Preference table.  This table contains,
the value that is to be assigned to the Local
Preference attibute.
fsbgp4LocalPrefEntry row .1.3.6.1.4.1.10876.101.1.41.4.1
Entry containing information about the connection with a BGP peer.
Column Syntax OID
This is the index to the table. Any entry in the table can be
configured only if fsbgp4LocalAs is set.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.4.1.1
The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.10876.101.1.41.4.1.2
The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the LocalPref value for an update is calculated.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.4.1.3
An IP address prefix in the Network Layer Reachability Information field.
A value of zero indicates that the entry is not valid and will not be
matched for when the Local Pref value for an update is calculated.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.4.1.4
Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not valid
and will not be matched for when the Local Pref value for an update
i…
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.4.1.5
Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.4.1.6
The direction of the update with which the entry is to be associated.
Enumerationr/w
Enumerated Values:
1in
2out
.1.3.6.1.4.1.10876.101.1.41.4.1.7
The value assigned to the LP Attribute for the route present in NLRI
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.10876.101.1.41.4.1.8
This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received.
Enumerationr/w
Enumerated Values:
1false
2true
.1.3.6.1.4.1.10876.101.1.41.4.1.9

fsbgp4UpdateFilterTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.5 · 1 row entry · 8 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4UpdateFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4UpdateFilterTable'
BGP Update Filter Table.  This table contains
Rules to filter out updates based on the AS from
which it is received, NLRI and AS through which it
had passed.
fsbgp4UpdateFilterEntry row .1.3.6.1.4.1.10876.101.1.41.5.1
Entry containing information about the updates
that are to be filtered.
Column Syntax OID
This is the index to the table. Any entry in the table can be configured
only if fsbgp4LocalAs is set.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.5.1.1
The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.10876.101.1.41.5.1.2
The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the update is checked.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.5.1.3
An IP address prefix in the Network Layer Reachability Information field.
A value of zero in this field indicates that the NLRI field may not be
matched.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.5.1.4
Length in bits of the IP address prefix
in the Network Layer Reachability
Information field. A value of zero in this field
indicates that the NLRI field may not be matched.
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.5.1.5
Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.5.1.6
The direction of the update with which the entry is to be associated.
Enumerationr/w
Enumerated Values:
1in
2out
.1.3.6.1.4.1.10876.101.1.41.5.1.7
The action to be taken when the characteristics
that are specified in the entry is matched.
Enumerationr/w
Enumerated Values:
1allow
2filter
.1.3.6.1.4.1.10876.101.1.41.5.1.8

fsbgp4AggregateTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.6 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4AggregateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4AggregateTable'
BGP Aggregate Table. The entries in the table
specifies the IP address based on which the routing
information has to be aggregated.
fsbgp4AggregateEntry row .1.3.6.1.4.1.10876.101.1.41.6.1
Entry containing information about the IP address
on which the aggregation has to be done.
Column Syntax OID
This is the index to the table.Any entry in the table can be
configured only if fsbgp4LocalAs is set.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.6.1.1
The desired state of this entry.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.10876.101.1.41.6.1.2
An IP address prefix in the Network Layer Reachability Information field.
This field is configurable only if the admin status is DOWN
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.6.1.3
Length in bits of the IP address prefix in the Network Layer Reachability
Information field. This field is configurable only if the admin status
is DOWN.
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.6.1.4
This object specifies the route update that should be sent
to the peers -
summary-only - specifies that only the summarized route
has to be advertised to peers.
All - specifies that bot…
Enumerationr/w
Enumerated Values:
1summaryOnly
2all
.1.3.6.1.4.1.10876.101.1.41.6.1.5
.1.3.6.1.4.1.10876.101.1.41.7.8 · 1 row entry · 2 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RRDMetricTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RRDMetricTable'
A table describing the configuration of metric values to 
the redistributed routes.
fsbgp4RRDMetricEntry row .1.3.6.1.4.1.10876.101.1.41.7.8.1
Information describing the configuration of single entry.
Column Syntax OID
Protocol Id for which the Metric value needs to be changed by the User.
Enumeration
Enumerated Values:
1ospf
2rip
3connected
4static
.1.3.6.1.4.1.10876.101.1.41.7.8.1.1
The Metric value to be considered instead of the default value from RTM
for the protocol specified. If the value not secified by the user,
default metric value is considered.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.41.7.8.1.2

fsbgp4ImportRouteTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.8 · 1 row entry · 7 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ImportRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ImportRouteTable'
Non-BGP routes imported into the BGP RIB can be viewed through this table.
Also allows importing a static route into BGP.After updating the RIB tree,
if there is any change in the best route selected, then the  route is 
updated to the Common Forwarding table.
fsbgp4ImportRouteEntry row .1.3.6.1.4.1.10876.101.1.41.8.1
Import Route entry.
Column Syntax OID
Prefix of the route to be imported.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.8.1.1
Prefix length of the route.
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.8.1.2
Protocol value for Non-BGP routes.
2- LOCAL,
3 - STATIC,
8 - RIP,
13 - OSPF.
Only STATIC routes (protocol 3) can be added through this table.
However all non-BGP protocol (Local, Static, RIP, OSPF) routes can
be v…
Integer32
Constraints:
range: 2-3
range: 8-8
range: 13-13
.1.3.6.1.4.1.10876.101.1.41.8.1.3
NextHop Ipaddress for the route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.8.1.4
Interface Index of the Route
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.8.1.5
Metric for the route being imported.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.8.1.6
Controls addition or deletion of route.
Enumerationr/w
Enumerated Values:
1add
2delete
.1.3.6.1.4.1.10876.101.1.41.8.1.7

fsbgp4FsmTransitionHistTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.9 · 1 row entry · 2 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4FsmTransitionHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4FsmTransitionHistTable'
Gets FSM transitions history per peer
fsbgp4FsmTransitionHistEntry row .1.3.6.1.4.1.10876.101.1.41.9.1
Fsm Hist entry.
Indexes
Column Syntax OID
fsbgp4Peerdeprecated
Peer from which FSM transition history would be read.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.9.1.1
sequence of FSM states separated by space
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.9.1.2

fsbgp4RflRouteReflectorTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.10.2 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RflRouteReflectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RflRouteReflectorTable'
BGP Route Reflector Table. This table indicates the Rfl path attributes
that are associated with specified path to a network.
fsbgp4RflRouteReflectorEntry row .1.3.6.1.4.1.10876.101.1.41.10.2.1
Entry containing information about the route reflection specific path
attributes received with a given route
Column Syntax OID
An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by fsbgp4RflPathAttrAddrPrefixLen.
Any bits beyond the length specified by fsbgp4RflPathAttrAddrPrefix…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.10.2.1.1
Length in bits of the IP address prefix in NLRI field.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.10.2.1.2
The address of the peer where the path information was learned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.10.2.1.3
The Originator-ID identifying the router that initially advertised
this destination to a Route Reflector. A value of 0.0.0.0 indicates
the absence of this attribute.
OctetString
Constraints:
range: 4-4
.1.3.6.1.4.1.10876.101.1.41.10.2.1.4
A sequence of four octet long values Cluster-IDs representing the reflection path
that the route has passed. Each four octet long value represents the ID
of a cluster that the route has traversed. A length of zero (0)
OctetString
Constraints:
range: 0-4096
.1.3.6.1.4.1.10876.101.1.41.10.2.1.5

fsbgp4RfdRtDampHistTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.11.2 · 1 row entry · 8 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RfdRtDampHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RfdRtDampHistTable'
Route damping history table.This table contains the figure-of-merit and 
the route status
fsbgp4RfdRtDampHistEntry row .1.3.6.1.4.1.10876.101.1.41.11.2.1
Entry contains route damping history
Column Syntax OID
An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by
fsbgp4PathAttrAddrPrefixLen. Any bits beyond the length specified by
bgp4PathAttrAddrPrefixLen ar…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.11.2.1.1
Length in bits of the IP address prefix in NLRI field.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.11.2.1.2
The Peer remote address of the peer where the path information was
learned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.11.2.1.3
Multiple damping histories can be present for the same destination when
the peer is switching between two alternate AS Paths.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.11.2.1.4
fsbgp4RfdRtFomdeprecated
The figure-of-merit of the route
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.11.2.1.5
The time when the route figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.11.2.1.6
The value gives the status whether the route is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.11.2.1.7
The value gives the status whether the route is feasible or unfeasible
route
Enumeration
Enumerated Values:
1none
2feasibleroute
3unfeasibleroute
.1.3.6.1.4.1.10876.101.1.41.11.2.1.8

fsbgp4RfdPeerDampHistTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.11.3 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RfdPeerDampHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RfdPeerDampHistTable'
Peer Damping history table. It contains the peer figure-of-merit and 
peer status.
fsbgp4RfdPeerDampHistEntry row .1.3.6.1.4.1.10876.101.1.41.11.3.1
Entry contains peer damping history
Column Syntax OID
The peer remote address of the peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.11.3.1.1
The current figure-of-merit of peer
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.11.3.1.2
The time when the figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.11.3.1.3
This value gives the status whether peer is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.11.3.1.4
This value gives the status whether peer is up or down
Enumeration
Enumerated Values:
1none
2peerup
3peerdown
.1.3.6.1.4.1.10876.101.1.41.11.3.1.5

fsbgp4RfdRtsReuseListTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.11.4 · 1 row entry · 8 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RfdRtsReuseListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RfdRtsReuseListTable'
Routes Reuse List Table. It contains the IP prefix and prefix length.
fsbgp4RfdRtsReuseListEntry row .1.3.6.1.4.1.10876.101.1.41.11.4.1
Entry contains routes reuse list
Column Syntax OID
An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by fsbgp4RtIPPrefixLen.
Any bits beyond the length specified by fsbgp4IPPrefixLen are
zeroed.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.11.4.1.1
Length in bits of the IP address prefix in NLRI field.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.11.4.1.2
The Peer remote address of the peer where the path information was
learned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.11.4.1.3
Multiple entries can be present in the routes reuse list for the same
destination. When the external peer is switching between two AS paths,
both paths are penalized and inserted into routes reuse list.The Reuse
List In…
Integer32
Constraints:
range: 0-10
.1.3.6.1.4.1.10876.101.1.41.11.4.1.4
The figure-of-merit of the route which is in the routes reuse list
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.11.4.1.5
The time when the route figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.11.4.1.6
The value gives the status whether the route is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.11.4.1.7
The value gives the status whether the route is feasible or unfeasible
route
Enumeration
Enumerated Values:
1none
2feasibleroute
3unfeasibleroute
.1.3.6.1.4.1.10876.101.1.41.11.4.1.8

fsbgp4RfdPeerReuseListTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.11.5 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RfdPeerReuseListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RfdPeerReuseListTable'
Peer's Reuse List Table. It contains the Peer Remote Address.
fsbgp4RfdPeerReuseListEntry row .1.3.6.1.4.1.10876.101.1.41.11.5.1
Entry contains routes reuse list
Column Syntax OID
The peer remote address of the peer which is in the peer's reuse list.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.11.5.1.1
The current figure-of-merit of peer
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.11.5.1.2
The time when the figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.11.5.1.3
This value gives the status whether peer is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.11.5.1.4
This value gives the status whether peer is up or down
Enumeration
Enumerated Values:
1none
2peerup
3peerdown
.1.3.6.1.4.1.10876.101.1.41.11.5.1.5

fsbgp4CommRouteAddCommTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.12.2 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CommRouteAddCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CommRouteAddCommTable'
This table is used to configure additive communities
for a given destination.
fsbgp4CommRouteAddCommEntry row .1.3.6.1.4.1.10876.101.1.41.12.2.1
Routes configured additive communities Table Entry
Column Syntax OID
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.12.2.1.1
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.12.2.1.2
Additive Community configured for the Route
Unsigned32
Constraints:
range: 65536-4294901759
range: 4294967041-4294967043
.1.3.6.1.4.1.10876.101.1.41.12.2.1.3
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.12.2.1.4
.1.3.6.1.4.1.10876.101.1.41.12.3 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CommRouteDeleteCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CommRouteDeleteCommTable'
This table is used to configure delete communities
for a given destination.
fsbgp4CommRouteDeleteCommEntry row .1.3.6.1.4.1.10876.101.1.41.12.3.1
Routes configured delete communities Table Entry
Column Syntax OID
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.12.3.1.1
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.12.3.1.2
Delete Community configured for the Route
Unsigned32
Constraints:
range: 65536-4294901759
range: 4294967041-4294967043
.1.3.6.1.4.1.10876.101.1.41.12.3.1.3
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.12.3.1.4
.1.3.6.1.4.1.10876.101.1.41.12.4 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CommRouteCommSetStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CommRouteCommSetStatusTable'
This table is used to configure the local policy of communities
for a given destination.
fsbgp4CommRouteCommSetStatusEntry row .1.3.6.1.4.1.10876.101.1.41.12.4.1
Routes configured delete communities Table Entry
Column Syntax OID
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.12.4.1.1
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.12.4.1.2
Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive communities
o setnone - to send without communities,
o modify - to strip delete communities in r…
Enumerationr/w
Enumerated Values:
1none
2set
3setnone
4modify
.1.3.6.1.4.1.10876.101.1.41.12.4.1.3
Row status for creating entries into this table.
This object can be set only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.12.4.1.4
.1.3.6.1.4.1.10876.101.1.41.12.5 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CommPeerSendStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CommPeerSendStatusTable'
This table is used to configure the local policy of communities
to send or not for a given peer.
fsbgp4CommPeerSendStatusEntry row .1.3.6.1.4.1.10876.101.1.41.12.5.1
Peer community Send Status Table Entry
Column Syntax OID
IP address of the Peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.12.5.1.1
Community Send status of the peer.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer.
This object can be set only if fsbgp4LocalAs is confi…
Enumerationr/w
Enumerated Values:
1none
2send
3donotsend
.1.3.6.1.4.1.10876.101.1.41.12.5.1.2
Row status for creating entries into this table. This object can be set
only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.12.5.1.3
.1.3.6.1.4.1.10876.101.1.41.12.6 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CommInFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CommInFilterTable'
This table is used to configure the incoming filter status
for a given community value
fsbgp4CommInFilterEntry row .1.3.6.1.4.1.10876.101.1.41.12.6.1
Incoming Communities Filter Table Entry
Column Syntax OID
The community value for which the input filtering
policy is to be updated
Unsigned32
Constraints:
range: 65536-4294901759
range: 4294967041-4294967043
.1.3.6.1.4.1.10876.101.1.41.12.6.1.1
Incoming filtering policy for the community.
o none - is for read-only
o accept - Accept the community value.
o deny - Deny the community value.
Enumerationr/w
Enumerated Values:
1none
2accept
3deny
.1.3.6.1.4.1.10876.101.1.41.12.6.1.2
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.12.6.1.3
.1.3.6.1.4.1.10876.101.1.41.12.7 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CommOutFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CommOutFilterTable'
This table is used to configure the outgoing filter status
for a given community value
fsbgp4CommOutFilterEntry row .1.3.6.1.4.1.10876.101.1.41.12.7.1
Outgoing Communities Filter Table Entry
Column Syntax OID
The community value for which the outgoing filtering
policy is to be updated
Unsigned32
Constraints:
range: 65536-4294901759
range: 4294967041-4294967043
.1.3.6.1.4.1.10876.101.1.41.12.7.1.1
Outgoing filtering policy for the community.
o none - is for read-only
o advertise - Advertise the community value.
o filter - Filter the community value.
Enumerationr/w
Enumerated Values:
1none
2advertise
3filter
.1.3.6.1.4.1.10876.101.1.41.12.7.1.2
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.12.7.1.3
.1.3.6.1.4.1.10876.101.1.41.12.8 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CommReceivedRouteCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CommReceivedRouteCommTable'
Received Communities table which contains the Communities 
associated with the route that is received from peer.
fsbgp4CommReceivedRouteCommEntry row .1.3.6.1.4.1.10876.101.1.41.12.8.1
Received Communities table which contains the Communities
associated with the route that is received from peer.
Column Syntax OID
fsbgp4IpNetdeprecated
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.12.8.1.1
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.12.8.1.2
The remote IP Address of peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.12.8.1.3
The Community Values received for the destination from this peer
OctetString
Constraints:
range: 0-800
.1.3.6.1.4.1.10876.101.1.41.12.8.1.4
.1.3.6.1.4.1.10876.101.1.41.13.2 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ExtCommRouteAddExtCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ExtCommRouteAddExtCommTable'
This table is used to configure additive extended communities
for a given destination.
fsbgp4ExtCommRouteAddExtCommEntry row .1.3.6.1.4.1.10876.101.1.41.13.2.1
Routes configured additive ext-communities Table Entry
Column Syntax OID
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.13.2.1.1
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.13.2.1.2
Additive Ext-Community for the destination
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.10876.101.1.41.13.2.1.3
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.13.2.1.4
.1.3.6.1.4.1.10876.101.1.41.13.3 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ExtCommRouteDeleteExtCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ExtCommRouteDeleteExtCommTable'
This table is used to configure delete extended communities
for a given destination.
fsbgp4ExtCommRouteDeleteExtCommEntry row .1.3.6.1.4.1.10876.101.1.41.13.3.1
Routes configured delete ext-communities Table Entry
Column Syntax OID
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.13.3.1.1
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.13.3.1.2
Delete Ext-Community for the destination
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.10876.101.1.41.13.3.1.3
Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.13.3.1.4
.1.3.6.1.4.1.10876.101.1.41.13.4 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ExtCommRouteExtCommSetStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ExtCommRouteExtCommSetStatusTable'
This table is used to configure the local policy of extended communities
for a given destination.
fsbgp4ExtCommRouteExtCommSetStatusEntry row .1.3.6.1.4.1.10876.101.1.41.13.4.1
Routes configured delete ext-communities Table Entry
Column Syntax OID
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.13.4.1.1
IP prefix length of the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.13.4.1.2
Ext-Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive ext-communities
o setnone - to send without ext-communities,
o modify - to strip delete ext-…
Enumerationr/w
Enumerated Values:
1none
2set
3setnone
4modify
.1.3.6.1.4.1.10876.101.1.41.13.4.1.3
Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.13.4.1.4
.1.3.6.1.4.1.10876.101.1.41.13.5 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ExtCommPeerSendStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ExtCommPeerSendStatusTable'
This table is used to configure the local policy of extended communities
to send or not for a given peer.
fsbgp4ExtCommPeerSendStatusEntry row .1.3.6.1.4.1.10876.101.1.41.13.5.1
Peer extended community Send Status Table Entry
Column Syntax OID
IP address of the Peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.13.5.1.1
Extended Community Send status of the peer.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to this peer.
This object can be set only …
Enumerationr/w
Enumerated Values:
1none
2send
3donotsend
.1.3.6.1.4.1.10876.101.1.41.13.5.1.2
Row status to create entries into this table.This object can be set only
if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.13.5.1.3
.1.3.6.1.4.1.10876.101.1.41.13.6 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ExtCommInFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ExtCommInFilterTable'
This table is used to configure the incoming filter status
for a given extended community value
fsbgp4ExtCommInFilterEntry row .1.3.6.1.4.1.10876.101.1.41.13.6.1
Incoming Extended Communities Filter Table Entry
Column Syntax OID
The extended community value for which the input filtering
policy is to be updated
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.10876.101.1.41.13.6.1.1
Incoming filtering policy for the extended community.
o none - is for read-only
o accept - Accept the extended community value.
o deny - Deny the extended community value.
Enumerationr/w
Enumerated Values:
1none
2accept
3deny
.1.3.6.1.4.1.10876.101.1.41.13.6.1.2
Row Status for creating the entries into this table.This object can be set
only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.13.6.1.3
.1.3.6.1.4.1.10876.101.1.41.13.7 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ExtCommOutFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ExtCommOutFilterTable'
This table is used to configure the outgoing filter status
for a given extended community value
fsbgp4ExtCommOutFilterEntry row .1.3.6.1.4.1.10876.101.1.41.13.7.1
Outgoing Extended Communities Filter Table Entry
Column Syntax OID
The extended community value for which the outgoing filtering
policy is to be updated
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.10876.101.1.41.13.7.1.1
Outgoing filtering policy for the extended community.
o none - is for read-only
o advertise - Advertise the extended community value.
o filter - Filter the extended community value.
Enumerationr/w
Enumerated Values:
1none
2advertise
3noadvertise
.1.3.6.1.4.1.10876.101.1.41.13.7.1.2
Row Status to create entries into this table.This object can be set
only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.13.7.1.3

fsbgp4PeerLinkBwTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.13.8 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4PeerLinkBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4PeerLinkBwTable'
This table is used to configure the link bandwidths for a given peer
fsbgp4PeerLinkBwEntry row .1.3.6.1.4.1.10876.101.1.41.13.8.1
Peer Link Bandwidth Table Entry
Column Syntax OID
IP address of the Peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.13.8.1.1
Link Bandwidth in bytes per second.This object can be set only if
fsbgp4LocalAs is configured.
Unsigned32r/w
Constraints:
range: 7000-4294967295
.1.3.6.1.4.1.10876.101.1.41.13.8.1.2
Row Status to create entries into this table.
This object can be set only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.13.8.1.3
.1.3.6.1.4.1.10876.101.1.41.13.9 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4ExtCommReceivedRouteExtCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4ExtCommReceivedRouteExtCommTable'
Received Extended Communities table which contains the Extended 
Communities associated with the route that is received from peer.
fsbgp4ExtCommReceivedRouteExtCommEntry row .1.3.6.1.4.1.10876.101.1.41.13.9.1
Received extended communities table Entry
Column Syntax OID
IP address of the destination
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.13.9.1.1
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.13.9.1.2
The remote IP Address of peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.13.9.1.3
The ExtCommunity Values received for the destination from this peer
OctetString
Constraints:
range: 0-800
.1.3.6.1.4.1.10876.101.1.41.13.9.1.4

fsbgp4CapSupportedCapsTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.14.2 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CapSupportedCapsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CapSupportedCapsTable'
Supported Capabilities Table. This table contains, the capabilities
that are supported for particular peer
fsbgp4CapSupportedCapsEntry row .1.3.6.1.4.1.10876.101.1.41.14.2.1
Entry contains supported Capabilites
Column Syntax OID
The remote IP Address of Peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.14.2.1.1
BGP-4 Capability Advertisement Capability Code that is supported for
peer.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.14.2.1.2
Multiple instances of a given Capability may be supported
by a BGP speaker. This variable is used to index them.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.10876.101.1.41.14.2.1.3
The length of the supported Capability data
Integer32r/w
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.2.1.4
The value of the supported Capability
OctetStringr/w
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.2.1.5
The variable displays the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.14.2.1.6
.1.3.6.1.4.1.10876.101.1.41.14.3 · 1 row entry · 2 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4StrictCapabilityMatchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4StrictCapabilityMatchTable'
Strict Capability Match table.If the Strict Capability Match is enabled 
for particular peer, the BGP session will be established only if peer 
supports all the Capabilites that are supported by the speaker for 
that peer.If enabled and the capabilities do not match strictly,then
the BGP session is terminated, without any attempt to auto re-peer.
If disabled, BGP session is established with common capabilities,if 
present.
fsbgp4StrictCapabilityMatchEntry row .1.3.6.1.4.1.10876.101.1.41.14.3.1
Entry contains Strict Capability Match
Column Syntax OID
The remote IP Address of Peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.14.3.1.1
This value gives whether Strict Capability Match is enabled or
disabled for particular peer
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.41.14.3.1.2

fsbgp4CapsAnnouncedTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.14.4 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CapsAnnouncedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CapsAnnouncedTable'
This Announced Capabilities table contains the capabilities that are 
announced to the peer.
fsbgp4CapsAnnouncedEntry row .1.3.6.1.4.1.10876.101.1.41.14.4.1
Entry contains the Capabilities that are announced to peer
Column Syntax OID
The remote IP Address of BGP Peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.14.4.1.1
BGP-4 Capability Advertisement Capability Code that is announced to peer.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.14.4.1.2
Multiple instances of a given capability may be announced
to peer. This variable is used to index them.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.10876.101.1.41.14.4.1.3
The length of the Capability data of announced Capability
Integer32
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.4.1.4
The value of announced Capability
OctetString
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.4.1.5

fsbgp4CapReceivedCapsTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.14.5 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CapReceivedCapsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CapReceivedCapsTable'
Received Capabilities table which contains the Capabilities that are
received from peer.
fsbgp4CapReceivedCapsEntry row .1.3.6.1.4.1.10876.101.1.41.14.5.1
Entry contains the received Capabilities
Column Syntax OID
The remote IP Address of peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.14.5.1.1
BGP-4 Capability Advertisement Capability Code that is received from peer.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.14.5.1.2
Multiple instances of a given Capability may be received from
peer. This variable is used to index them.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.10876.101.1.41.14.5.1.3
The length of Capability data received from peer
Integer32
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.5.1.4
The value of Capability received from peer
OctetString
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.5.1.5

fsbgp4CapAcceptedCapsTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.14.6 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4CapAcceptedCapsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4CapAcceptedCapsTable'
Accepted Capabilities table which contains the Capabilities that are
received from peer and accepted by the speaker.
fsbgp4CapAcceptedCapsEntry row .1.3.6.1.4.1.10876.101.1.41.14.6.1
Entry contains the accepted Capabilities
Column Syntax OID
The remote IP Address of peer
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.14.6.1.1
BGP-4 Capability Advertisement Capability Code that is received from peer
and supported by speaker.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.14.6.1.2
Multiple instances of a given Capability may be received from
peer and accepted by speaker. This variable is used to index them.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.10876.101.1.41.14.6.1.3
The length of accepted Capability data
Integer32
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.6.1.4
The value of accepted Capability
OctetString
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.14.6.1.5
.1.3.6.1.4.1.10876.101.1.41.15.2 · 1 row entry · 2 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgpAscConfedPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgpAscConfedPeerTable'
BGP peer confederation table, this table contains information 
about the Member-ASs of the confederation
fsbgpAscConfedPeerEntry row .1.3.6.1.4.1.10876.101.1.41.15.2.1
Entry containing information about a member-AS of the confederation.
Column Syntax OID
The local AS number of member-AS,
a value of zero indicates the absence of this value
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.10876.101.1.41.15.2.1.1
This object is used to enable or disable the member-AS.
Use disable, if member-AS entry needs to disabled,
Use enable, if member-AS entry needs to be enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.15.2.1.2

fsbgp4RtRefreshInboundTable

table deprecated
.1.3.6.1.4.1.10876.101.1.41.16.2 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RtRefreshInboundTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RtRefreshInboundTable'
Route Refresh Inbound Table
fsbgp4RtRefreshInboundEntry row .1.3.6.1.4.1.10876.101.1.41.16.2.1
Entry corresponds to Route Refresh Inbound.
Column Syntax OID
Address Family Identifier of the peer remote address
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.16.2.1.1
The IP address of the peeri for which the Route Refresh request has to
be issued.
OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.10876.101.1.41.16.2.1.2
Setting this object triggers the sending of the Route Refresh message
to the peer. This object will be cleared once the Route Refresh message
is sent to the peer. Route-Refresh message support is a default feature
If no…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.10876.101.1.41.16.2.1.3
.1.3.6.1.4.1.10876.101.1.41.16.3 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4RtRefreshStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4RtRefreshStatisticsTable'
Route Refresh Statistics Table
fsbgp4RtRefreshStatisticsEntry row .1.3.6.1.4.1.10876.101.1.41.16.3.1
Entry gives the statistics of Route Refresh.
Column Syntax OID
Address Family Identifier of the peer remote address.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.16.3.1.1
The IP address of the peer for which the Route Refresh Statistics has
to be read.
OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.10876.101.1.41.16.3.1.2
The number of Route Refresh messages sent to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.16.3.1.3
The number of Route Refresh messages that could not be
transmitted to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.16.3.1.4
The number of Route Refresh messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.16.3.1.5
The number of invalid Route Refresh messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.16.3.1.6
.1.3.6.1.4.1.10876.101.1.41.17.1 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4TCPMD5AuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4TCPMD5AuthTable'
TCP MD5 Authientication Table
fsbgp4TCPMD5AuthEntry row .1.3.6.1.4.1.10876.101.1.41.17.1.1
Entry corresponds to the TCP MD5 authentication password.
Column Syntax OID
Address Family Identifier of the peer remote address.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.17.1.1.1
The IP address of the peer for which the TCP MD5 Authentication
Password has to be set.
to be read.
OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.10876.101.1.41.17.1.1.2
The TCP MD5 Authentication Password that has to be sent with all TCP
packets originated from the peer.
OctetStringr/w
Constraints:
range: 1-80
.1.3.6.1.4.1.10876.101.1.41.17.1.1.3
This object indicates whether TCP MD5 password needs to be set/reset
for the peer. This object needs to be set before the object
fsbgp4TCPMD5AuthPassword can be set.
Enumerationr/w
Enumerated Values:
1set
2clear
.1.3.6.1.4.1.10876.101.1.41.17.1.1.4
.1.3.6.1.4.1.10876.101.1.41.18.2 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4SoftReconfigOutboundTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4SoftReconfigOutboundTable'
Soft Reconfig outbound Table
fsbgp4SoftReconfigOutboundEntry row .1.3.6.1.4.1.10876.101.1.41.18.2.1
Entry corresponds to Soft Reconfig outbound.
Column Syntax OID
Address Family Identifier of the peer remote address
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.18.2.1.1
The IP address of the peer for which the outbound soft-reconfig has to
be performed.
OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.10876.101.1.41.18.2.1.2
Setting this object triggers the outbound soft-reconfig process for the peer. This object value is cleared once the soft-reconfig process is
completed.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.10876.101.1.41.18.2.1.3
.1.3.6.1.4.1.10876.101.1.41.19 · 1 row entry · 45 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeBgpPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeBgpPeerTable'
BGP peer table.  This table contains, one entry per BGP peer,
information about the connections with BGP peers.
fsbgp4MpeBgpPeerEntry row .1.3.6.1.4.1.10876.101.1.41.19.1
Entry containing information about the connection with a BGP peer.
Column Syntax OID
Type of the remote peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.19.1.1
The BGP Identifier of this entry's BGP peer.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.19.1.2
The BGP peer connection state.
Enumeration
Enumerated Values:
1idle
2connect
3active
4opensent
5openconfirm
6established
.1.3.6.1.4.1.10876.101.1.41.19.1.3
The desired state of the BGP connection. A transition from
'stop' to 'start' will cause the BGP Start Event to be generated.
A transition from 'start' to 'stop' will cause the BGP Stop
Event to be generated. This para…
Enumerationr/w
Enumerated Values:
1stop
2start
3auto-start
.1.3.6.1.4.1.10876.101.1.41.19.1.4
The negotiated version of BGP running between the two peers.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.41.19.1.5
The local IP address of this entry's BGP connection.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.19.1.6
The local port for the TCP connection between the BGP peers.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.7
The remote IP address of this entry's BGP peer.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.19.1.8
The remote port for the TCP connection between the BGP peers.
Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort,
bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropriate
reference to the standard MIB TCP c…
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.9
The remote autonomous system number.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.10
The number of BGP UPDATE messages received on this connection.
This object should be initialized to zero (0) when the connection
is established.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.11
The number of BGP UPDATE messages transmitted on this connection.
This object should be initialized to zero (0) when the connection
is established.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.12
The total number of messages received from the remote peer on this
connection. This object should be initialized to zero when the
connection is established.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.13
The total number of messages transmitted to the remote peer on
this connection. This object should be initialized to zero when
the connection is established.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.14
The last error code and subcode seen by this peer on this connection.
If no error has occurred, this field is zero. Otherwise, the first
byte of this two byte OCTET STRING contains the error code, and the
second byte c…
OctetString
Constraints:
range: 2-2
.1.3.6.1.4.1.10876.101.1.41.19.1.15
The total number of times the BGP FSM transitioned into the
established state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.16
This timer indicates how long (in seconds) this peer has been in the
Established state or how long since this peer was last in the
Established state. It is set to zero when a new peer is configured
or the router is boo…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.17
Time interval in seconds for the ConnectRetry timer. The suggested
value for this timer is 120 seconds.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.18
Time interval in seconds for the Hold Timer established with the
peer. The value of this object is calculated by this BGP speaker
by using the smaller of the value in bgpPeerHoldTimeConfigured and
the Hold Time receive…
Integer32
Constraints:
range: 0-0
range: 3-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.19
Time interval in seconds for the KeepAlive timer established with
the peer. The value of this object is calculated by this BGP
speaker such that, when compared with bgpPeerHoldTime, it has the
same proportion as what b…
Integer32
Constraints:
range: 0-21845
.1.3.6.1.4.1.10876.101.1.41.19.1.20
Time interval in seconds for the Hold Time configured for this
BGP speaker with this peer. This value is placed in an OPEN
message sent to this peer by this BGP speaker, and is compared
with the Hold Time field in an O…
Integer32r/w
Constraints:
range: 0-0
range: 3-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.21
Time interval in seconds for the
KeepAlive timer configured for this BGP
speaker with this peer. The value of this
object will only determine the
KEEPALIVE messages' frequency relative to
the value specified in
bgpPeer…
Integer32r/w
Constraints:
range: 0-21845
.1.3.6.1.4.1.10876.101.1.41.19.1.22
Time interval in seconds for the
MinASOriginationInterval timer.
The suggested value for this timer is 15
seconds.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.23
Time interval in seconds for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30
seconds.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.24
Elapsed time in seconds since the last BGP
UPDATE message was received from the peer.
Each time bgpPeerInUpdates is incremented,
the value of this object is set to zero
(0).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.19.1.25
This object indicates that whether the End-Of-RIB marker sent to peer or not
Enumeration
Enumerated Values:
0none
1true
2false
.1.3.6.1.4.1.10876.101.1.41.19.1.26
This object indicates that whether the End-Of-RIB marker received from peer or not
Enumeration
Enumerated Values:
0none
1true
2false
.1.3.6.1.4.1.10876.101.1.41.19.1.27
This object indicates whether the peer BGP speaker is restarting speaker or receiving speaker or not having GR capability
Enumeration
Enumerated Values:
1restarting
2receiving
3none
.1.3.6.1.4.1.10876.101.1.41.19.1.28
This is the time (in seconds) received from peer through GR capability of open message. This is used in receiving speaker to make sure that the restarting speaker restarted within this interval
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.10876.101.1.41.19.1.29
This MIB object specifies whether BGP session with the associated peer
can be started automatically. This object when set to 'disabled',
requires manual start for initiating BGP session with the peer via
MIB object 'fsb…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.19.1.30
This MIB object specifies whether a BGP connection needs to be
automatically stopped after a TCP connect-retry count value specified
by MIB object 'fsbgp4mpePeerTcpConnectRetryCnt'. The resources
allocated for the BGP p…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.19.1.31
IdleHoldTime specifies the length of time the BGP peer is held in the
Idle state prior to allowing the next automatic restart.
The IdleHoldTime is configured only when the
fsbgp4mpePeerAllowAutomaticStart is Enabled or …
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.32
The DampPeerOscillations option specifies that the implementation
engages additional logic to damp the oscillations of BGP peers in
the face of series of automatic start and automatic stop operations
in the IDLE state.T…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.19.1.33
This MIB object allows configuration option to enable/disable delay
in sending of OPEN messages to the BGP peer for a specific time period
(DelayOpenTime). The delay allows the remote BGP Peer to send the first
OPEN mes…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.19.1.34
The DelayOpen time specifies the amount of time the BGP Peer should
delay in sending the OPEN message to the remote peer. If the
fsbgp4mpePeerDelayOpen option is enabled, the DelayOpen time can bei
configured. The defau…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.19.1.35
BGP speaker imposes a locally-configured, upper bound on the number of
address prefixes the speaker is willing to accept from a neighbor. The
default value is calculated as the following:

fsbgp4MaxNoofRo…
Integer32r/w
Constraints:
range: 1-5000
.1.3.6.1.4.1.10876.101.1.41.19.1.36
This counter denotes the Maximum number of times the BGP Peer has
tried to issue a TCP-Connect with its neighboring peers.
The default value for the counter is set as 5.
Integer32r/w
Constraints:
range: 1-50
.1.3.6.1.4.1.10876.101.1.41.19.1.37
This counter denotes the number of times the BGP Peer has tried to
issue a TCP-Connect with its neighboring peers. It is an internal value.
It increments for each Autostop event. If the
'fsbgp4mpePeerTcpCurrentConnectRe…
Integer32
Constraints:
range: 1-50
.1.3.6.1.4.1.10876.101.1.41.19.1.38
This MIB object specifies the PeerDamped Status. If it is enabled, it
denotes that the peer is in damped state. If it is disabled, it
denotes that either the peer has recovered from the damped state or not
entered into …
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.19.1.39
This object indicates whether peer-session is TCP MD5/TCP-AO
authenticated or not. If no session is established yet, its value is
no-session
Enumeration
Enumerated Values:
1no-session
2authenticatedMd5
3unauthenticated
4authenticatedTcpAo
.1.3.6.1.4.1.10876.101.1.41.19.1.40
Key id of the MKT which is used by the TCP session of the peer,
this field will be valid only when value of
fsbgp4mpePeerSessionAuthStatus is authenticated-tcp-ao
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.19.1.41
Discard packet for the peer, if packets are received with TCP-AO
and no matching MKT is found, default value is accept
Enumerationr/w
Enumerated Values:
1accept
2discard
.1.3.6.1.4.1.10876.101.1.41.19.1.42
Accept ICMPv4 type 3 & ICMPv6 type 1 messages for the TCP-AO
authenticated peer, default value is ignore
Enumerationr/w
Enumerated Values:
1accept
2ignore
.1.3.6.1.4.1.10876.101.1.41.19.1.43
This object is used to configure the IP Prefix list name in IN direction for this peer entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.19.1.44
This object is used to configure the IP Prefix list name in OUT direction for this peer entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.19.1.45
.1.3.6.1.4.1.10876.101.1.41.20 · 1 row entry · 24 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeBgp4PathAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeBgp4PathAttrTable'
The BGP-4 Received Path Attribute Table
contains information about paths to
destination networks received from all
BGP4 peers.
fsbgp4MpeBgp4PathAttrEntry row .1.3.6.1.4.1.10876.101.1.41.20.1
Information about a path to a network.
Column Syntax OID
The AFI of the prefix
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.20.1.1
The SAFI of the prefix
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.20.1.2
The AFI of the peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.20.1.3
The IP address of the peer where the path
information was learned.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.20.1.4
Length in bits of the IP address prefix
in the Network Layer Reachability
Information field.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.20.1.5
An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
bgp4PathAttrIpAddrPrefixLen.
Any bits beyond the length specified by…
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.20.1.6
The ultimate origin of the path
information.
Enumeration
Enumerated Values:
1igp
2egp
3incomplete
.1.3.6.1.4.1.10876.101.1.41.20.1.7
The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs, traversed by a
OctetString
Constraints:
range: 2-255
.1.3.6.1.4.1.10876.101.1.41.20.1.8
The address of the border router that
should be used for the destination network.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.20.1.9
This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system. A value of -1
indicates the absence of this attribute.
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.10876.101.1.41.20.1.10
The originating BGP4 speaker's degree of
preference for an advertised route. A
value of -1 indicates the absence of this
attribute.
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.10876.101.1.41.20.1.11
Whether or not the local system has
selected a less specific route without
selecting a more specific route.
Enumeration
Enumerated Values:
1lessSpecificRrouteNotSelected
2lessSpecificRouteSelected
.1.3.6.1.4.1.10876.101.1.41.20.1.12
The AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.20.1.13
The IP address of the last BGP4 speaker
that performed route aggregation. A value
of 0.0.0.0 indicates the absence of this
attribute.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.41.20.1.14
The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route. A value of -1 indicates the
absence of this attribute.
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.10876.101.1.41.20.1.15
An indication of whether or not this route
was chosen as the best BGP4 route.
Enumeration
Enumerated Values:
1nonbest
2best
3stale
.1.3.6.1.4.1.10876.101.1.41.20.1.16
The community values received for this destinatin
from the peer
OctetString
Constraints:
range: 0-800
.1.3.6.1.4.1.10876.101.1.41.20.1.17
The Originator-ID identifying the router that initially
advertised this destination to a Route Reflector.
A value of 0.0.0.0 indicates the absence of this attribute
OctetString
Constraints:
range: 4-4
.1.3.6.1.4.1.10876.101.1.41.20.1.18
A sequence of four octet long values Cluster-IDs representing
the reflection path that the route has passed. Each four octet
long value represents the ID of a cluster that the route has
traversed. A length of zero (0) i…
OctetString
Constraints:
range: 0-4096
.1.3.6.1.4.1.10876.101.1.41.20.1.19
The extended community values received for this
destinatin from the peer
OctetString
Constraints:
range: 0-800
.1.3.6.1.4.1.10876.101.1.41.20.1.20
One or more path attributes not understood
by this BGP4 speaker. Size zero (0)
indicates the absence of such
attribute(s). Octets beyond the maximum
size, if any, are not recorded by this
object.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.20.1.21
MPLS Label received for this destination from the peer
OctetString
Constraints:
range: 0-24
.1.3.6.1.4.1.10876.101.1.41.20.1.22
The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs, traversed by a
OctetString
Constraints:
range: 2-255
.1.3.6.1.4.1.10876.101.1.41.20.1.23
The 4 Byte AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.20.1.24
.1.3.6.1.4.1.10876.101.1.41.21 · 1 row entry · 22 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpePeerExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpePeerExtTable'
BGP Peer Extension Table. The entries in the table specifies
the additional features supported for a peer by futureBGP4
Speaker in addition to the features specified as in bgpPeerTable
(described in  stdbgp4.mib.). All entries in this table can be
configured only if fsbgp4LocalAs has be configured.
fsbgp4MpePeerExtEntry row .1.3.6.1.4.1.10876.101.1.41.21.1
Entry containing information about the additional features supported
for a peer by futureBGP4 Speaker.
Column Syntax OID
The Type of the remote peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.21.1.1
The remote IP address of this entry's BGP peer.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.21.1.2
This object is used to create or delete a peer. If called with create
and no matching peer exists, then a new peer entry will be created. The
admin status of this newly created peer will be stop. To enable the peer
set …
Enumerationr/w
Enumerated Values:
1create
2delete
.1.3.6.1.4.1.10876.101.1.41.21.1.3
The remote autonomous system number of the Peer. The peer admin status
can be made up only if this object is configured for a valid AS number.
When OPEN message is received from this peer during the BGP Connection
estab…
Unsigned32r/w
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.10876.101.1.41.21.1.4
This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected EBGP peers are allowed.
For the internal …
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.21.1.5
This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected and seperated by a maximum hop limit as configured by this
object. For the in…
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.10876.101.1.41.21.1.6
This object specifies how the next hop attribute sent in the update
messages to this peer has to be generated. When the object takes the
value of self,the next Hop attribute will always be the sender Local
Address els…
Enumerationr/w
Enumerated Values:
1automatic
2self
.1.3.6.1.4.1.10876.101.1.41.21.1.7
This object specifies whether the peer is Client peer or Non-Client
peer. By default, the peer is created as Non-Client Peer.
Enumerationr/w
Enumerated Values:
1nonClient
2client
.1.3.6.1.4.1.10876.101.1.41.21.1.8
This object configures the tcp window size on the sender side.
Integer32r/w
Constraints:
range: 4096-65536
.1.3.6.1.4.1.10876.101.1.41.21.1.9
This object configures the tcp window size on the receiver side.
Integer32r/w
Constraints:
range: 4096-65536
.1.3.6.1.4.1.10876.101.1.41.21.1.10
This object specifies which address should be used as the source address
of the TCP session initiated with the Peer. By default this object takes
value as 0 and the source address of the TCP session is filled by TCP.
Th…
InetAddressr/w
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.21.1.11
This object specifies the remote peer's network address. TCP connection is
established using the peer's remote-address. If the peer's remote-address
is a IPv4 address, the peer's network address carries the IPv6 network…
InetAddressr/w
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.21.1.12
This object specifies the gateway router's address that will be used as
nexthop in the routes advertised to the peer. This ensures that the
traffic coming from this peer is routed through this gateway.
InetAddressr/w
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.21.1.13
Community Send status of the peer.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer.
Enumerationr/w
Enumerated Values:
1none
2send
3donotsend
.1.3.6.1.4.1.10876.101.1.41.21.1.14
Extended Community Send status of the peer.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to this peer.
Enumerationr/w
Enumerated Values:
1none
2send
3donotsend
.1.3.6.1.4.1.10876.101.1.41.21.1.15
This object is used to set a peer connection to be passive, that means
the speaker will not initiate the session with that peer instead it
waits for the remote peer to initiate the session
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.21.1.16
If this object is set to enable/disable the advertisement of the default
route to the peer. This object overrides the global default
route configuration (fsbgp4DefaultOriginate) and always send a default
route to the pe…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.21.1.17
This object is set to activate the corresponding MP Capability.
If any of MP Capability is activate, then this capability should
be negotiated while establishing session with this neighbor.
Any get on this object will r…
Enumerationr/w
Enumerated Values:
1ipv4unicast
2ipv6unicast
8vpnv4unicast
.1.3.6.1.4.1.10876.101.1.41.21.1.18
This object is set to deactivate the corresponding MP Capability.
If any of MP Capability is deactivate, then this capability should
not be negotiated while establishing session with this neighbor.
Any get on this objec…
Enumerationr/w
Enumerated Values:
1ipv4unicast
2ipv6unicast
8vpnv4unicast
.1.3.6.1.4.1.10876.101.1.41.21.1.19
Denotes the VRF associated with the CE peer. If the Vrf Name
is not configured, the peer will be normal peer.
with respect to this VRF.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.10876.101.1.41.21.1.20
This variable is used to inform whether the PE can receive Route
Targets from CE, or PE can send Route Targets(RT) to CE router.
By default sending RT to CE and receiving RT from CE are disabled.
Enumerationr/w
Enumerated Values:
1send
2donotsend
.1.3.6.1.4.1.10876.101.1.41.21.1.21
Site Of Origin for the site connected CE peer
OctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.10876.101.1.41.21.1.22
.1.3.6.1.4.1.10876.101.1.41.22 · 1 row entry · 12 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeMEDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeMEDTable'
BGP4 MED table. This table contains the MED values that are to
be assigned to routes.
fsbgp4MpeMEDEntry row .1.3.6.1.4.1.10876.101.1.41.22.1
Entry containing information about the MED value.
Column Syntax OID
This is the index to the table. Any entry in the table can be
configured only if fsbgp4LocalAs is set.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.22.1.1
The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.10876.101.1.41.22.1.2
The remote autonomous system with which this entry is associated.
A value of zero indicates that this entry is not valid and will not
be matched for when the MED value for an update is calculated.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.22.1.3
Type of IP address prefix in the Network Layer Reachability Information
field in updates. This field needs to be set before setting the object
fsbgp4mpeMEDIPAddrPrefix.
InetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.22.1.4
Type of IP address prefix in the Network Layer Reachability Information
field in updates. This field needs to be set before setting the object
fsbgp4mpeMEDIPAddrPrefix.
BgpSafir/w
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.22.1.5
An IP address prefix in the Network Layer Reachability Information
field in updates. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calculated.
InetAddressr/w
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.22.1.6
Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calcul…
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.22.1.7
Comma seperated list of AS numbers that are to
be checked against the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.22.1.8
The direction of the update with which the entry is to be associated.
Enumerationr/w
Enumerated Values:
1in
2out
.1.3.6.1.4.1.10876.101.1.41.22.1.9
The value assigned to the MED Attribute for the route present in NLRI
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.10876.101.1.41.22.1.10
This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received.
Enumerationr/w
Enumerated Values:
1false
2true
.1.3.6.1.4.1.10876.101.1.41.22.1.11
The human-readable name of the VPN.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.10876.101.1.41.22.1.12
.1.3.6.1.4.1.10876.101.1.41.23 · 1 row entry · 12 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeLocalPrefTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeLocalPrefTable'
BGP Local Preference table.  This table contains,
the value that is to be assigned to the Local
Preference attibute.
fsbgp4MpeLocalPrefEntry row .1.3.6.1.4.1.10876.101.1.41.23.1
Entry containing information about the connection with a BGP peer.
Column Syntax OID
This is the index to the table. Any entry in the table can be
configured only if fsbgp4mpeLocalAs is set.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.23.1.1
The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.10876.101.1.41.23.1.2
The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the LocalPref value for an update is calculated.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.23.1.3
Type of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set before setting the object
fsbgp4mpeLocalPrefIPAddrPrefix.
InetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.23.1.4
Sub-sequent address family of IP address prefix in the
Network Layer Reachability Information field.This field needs to be set
before setting the object fsbgp4mpeLocalPrefIPAddrPrefix.
BgpSafir/w
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.23.1.5
An IP address prefix in the Network Layer Reachability Information field.
A value of zero indicates that the entry is not valid and will not be
matched for when the Local Pref value for an update is calculated.
InetAddressr/w
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.23.1.6
Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not valid
and will not be matched for when the Local Pref value for an update
i…
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.23.1.7
Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.23.1.8
The direction of the update with which the entry is to be associated.
Enumerationr/w
Enumerated Values:
1in
2out
.1.3.6.1.4.1.10876.101.1.41.23.1.9
The value assigned to the LP Attribute for the route present in NLRI
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.10876.101.1.41.23.1.10
This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received.
Enumerationr/w
Enumerated Values:
1false
2true
.1.3.6.1.4.1.10876.101.1.41.23.1.11
The human-readable name of the VPN.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.10876.101.1.41.23.1.12
.1.3.6.1.4.1.10876.101.1.41.24 · 1 row entry · 11 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeUpdateFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeUpdateFilterTable'
BGP Update Filter Table.  This table contains
Rules to filter out updates based on the AS from
which it is received, NLRI and AS through which it
had passed.
fsbgp4MpeUpdateFilterEntry row .1.3.6.1.4.1.10876.101.1.41.24.1
Entry containing information about the updates
that are to be filtered.
Column Syntax OID
This is the index to the table. Any entry in the table can be configured
only if fsbgp4LocalAs is set.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.10876.101.1.41.24.1.1
The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.10876.101.1.41.24.1.2
The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the update is checked.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.24.1.3
Type of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set, before setting the object
fsbgp4mpeUpdateFilterIPAddrPrefix.
InetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.24.1.4
SAFI of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set, before setting the object
fsbgp4mpeUpdateFilterIPAddrPrefix.
BgpSafir/w
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.24.1.5
An IP address prefix in the Network Layer Reachability Information field.
A value of zero in this field indicates that the NLRI field may not be
matched.
InetAddressr/w
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.24.1.6
Length in bits of the IP address prefix
in the Network Layer Reachability
Information field. A value of zero in this field
indicates that the NLRI field may not be matched.
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.24.1.7
Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.24.1.8
The direction of the update with which the entry is to be associated.
Enumerationr/w
Enumerated Values:
1in
2out
.1.3.6.1.4.1.10876.101.1.41.24.1.9
The action to be taken when the characteristics
that are specified in the entry is matched.
Enumerationr/w
Enumerated Values:
1allow
2filter
.1.3.6.1.4.1.10876.101.1.41.24.1.10
The human-readable name of the VPN.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.10876.101.1.41.24.1.11
.1.3.6.1.4.1.10876.101.1.41.25 · 1 row entry · 12 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeAggregateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeAggregateTable'
BGP Aggregate Table. The entries in the table
specifies the IP address based on which the routing
information has to be aggregated.
fsbgp4MpeAggregateEntry row .1.3.6.1.4.1.10876.101.1.41.25.1
Entry containing information about the IP address
on which the aggregation has to be done.
Column Syntax OID
This is the index to the table.Any entry in the table can be
configured only if fsbgp4LocalAs is set.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.41.25.1.1
The desired state of this entry. When the adminstatus is set to up,
the aggregate entry will be made active and the aggregate route
will be formed for this entry. When the adminstatus is set to down,
the aggregate rout…
Enumerationr/w
Enumerated Values:
1up
2down
3invalid
.1.3.6.1.4.1.10876.101.1.41.25.1.2
Type of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set before setting the object
fsbgp4mpeAggregateIPAddrPrefix.
InetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.25.1.3
SAFI of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set before setting the object
fsbgp4mpeAggregateIPAddrPrefix..
[Note] SAFI for Carrying Label (4) can't be set. The …
BgpSafir/w
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.25.1.4
An IP address prefix in the Network Layer Reachability Information field.
This field is configurable only if the admin status is DOWN
InetAddressr/w
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.25.1.5
Length in bits of the IP address prefix in the Network Layer Reachability
Information field. This field is configurable only if the admin status
is DOWN.
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.25.1.6
This object specifies the route update that should be sent
to the peers -
summary-only - specifies that only the summarized route
has to be advertised to peers.
All - specifies that bot…
Enumerationr/w
Enumerated Values:
1summaryOnly
2all
.1.3.6.1.4.1.10876.101.1.41.25.1.7
The human-readable name of the VPN.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.10876.101.1.41.25.1.8
Enables/Disables the autonomous system set path information.
It is an optional parameter
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.25.1.9
The human-readable name for adverise route-map. The route map contains
the rules for advertising the routes while aggregation. When we use
advertise-map, only advertise-map influences the creation of aggregate
entry. In…
OctetStringr/w
Constraints:
range: 1-20
.1.3.6.1.4.1.10876.101.1.41.25.1.10
The human-readable name for suppress route-map. The route map contains
the rules for suppressing the routes while aggregation. when we use
suppress-map configuration along with (summaryonly option set for)
fsbgp4mpeAggr…
OctetStringr/w
Constraints:
range: 1-20
.1.3.6.1.4.1.10876.101.1.41.25.1.11
The human-readable name for attribute route-map. The route map contains
the rules for setting the attributes the aggregated route. When
attribute-map and advertise-map along with fsbgp4mpeAggregateAsSet (enable)
and oth…
OctetStringr/w
Constraints:
range: 1-20
.1.3.6.1.4.1.10876.101.1.41.25.1.12
.1.3.6.1.4.1.10876.101.1.41.26 · 1 row entry · 10 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeImportRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeImportRouteTable'
Non-BGP routes imported into the BGP RIB can be viewed through this table.
Also allows importing a static route into BGP.After updating the RIB tree,
if there is any change in the best route selected, then the  route is 
updated to the Common Forwarding table.
fsbgp4MpeImportRouteEntry row .1.3.6.1.4.1.10876.101.1.41.26.1
Import Route entry.
Column Syntax OID
Type of Prefix of the route to be imported.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.26.1.1
SAFI of Prefix of the route to be imported. Only UNICAST (1) is allowed
right now. Route can be imported into VRF by providing SAFI (1) and
VRF name.
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.26.1.2
Prefix of the route to be imported.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.26.1.3
Prefix length of the route.
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.26.1.4
Protocol value for Non-BGP routes.
2- LOCAL,
3 - STATIC,
8 - RIP,
13 - OSPF.
Only STATIC routes (protocol 3) can be added through this table.
However all non-BGP protocol (Local, Static, RIP, OSPF) routes can
be v…
Integer32
Constraints:
range: 2-3
range: 8-8
range: 13-13
.1.3.6.1.4.1.10876.101.1.41.26.1.5
NextHop Ipaddress for the route.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.26.1.6
Interface Index of the Route
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.26.1.7
Metric for the route being imported.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.26.1.8
Vrf in which the route should be imported. If the rotueis to be installed
in default VRF, the value should be NULL string
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.10876.101.1.41.26.1.9
Controls addition or deletion of route.
Enumerationr/w
Enumerated Values:
1add
2delete
.1.3.6.1.4.1.10876.101.1.41.26.1.10
.1.3.6.1.4.1.10876.101.1.41.27 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeFsmTransitionHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeFsmTransitionHistTable'
Gets FSM transitions history per peer
fsbgp4MpeFsmTransitionHistEntry row .1.3.6.1.4.1.10876.101.1.41.27.1
Fsm Hist entry.
Column Syntax OID
Type of Peer from which FSM transition history would be read.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.27.1.1
Peer from which FSM transition history would be read.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.27.1.2
sequence of FSM states separated by space
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.27.1.3
.1.3.6.1.4.1.10876.101.1.41.28.1 · 1 row entry · 13 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeRfdRtDampHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeRfdRtDampHistTable'
Route damping history table.This table contains the figure-of-merit and 
the route status
fsbgp4MpeRfdRtDampHistEntry row .1.3.6.1.4.1.10876.101.1.41.28.1.1
Entry contains route damping history
Column Syntax OID
AFI of the route
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.28.1.1.1
SAFI of the route
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.28.1.1.2
An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by
fsbgp4mpePathAttrAddrPrefixLen. Any bits beyond the length specified by
bgp4PathAttrAddrPrefixLen…
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.28.1.1.3
Length in bits of the IP address prefix in NLRI field.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.28.1.1.4
AFI of the peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.28.1.1.5
The Peer remote address of the peer where the path information was
learned.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.28.1.1.6
The figure-of-merit of the route
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.28.1.1.7
The time when the route figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.28.1.1.8
The value gives the status whether the route is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.28.1.1.9
The value gives the status whether the route is feasible or unfeasible
route
Enumeration
Enumerated Values:
1none
2feasibleroute
3unfeasibleroute
.1.3.6.1.4.1.10876.101.1.41.28.1.1.10
This value gives the number of times the route being flapped
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.41.28.1.1.11
The time calculated for a route, from when a route is being flapped for
first time, time in seconds
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.28.1.1.12
The time after which a route can be reused again after it moves to
suppressed state from unsuppressed state, time in seconds
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.28.1.1.13
.1.3.6.1.4.1.10876.101.1.41.28.2 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeRfdPeerDampHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeRfdPeerDampHistTable'
Peer Damping history table. It contains the peer figure-of-merit and 
peer status.
fsbgp4MpeRfdPeerDampHistEntry row .1.3.6.1.4.1.10876.101.1.41.28.2.1
Entry contains peer damping history
Column Syntax OID
AFI of the remote peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.28.2.1.1
The peer remote address of the peer.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.28.2.1.2
The current figure-of-merit of peer
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.28.2.1.3
The time when the figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.28.2.1.4
This value gives the status whether peer is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.28.2.1.5
This value gives the status whether peer is up or down
Enumeration
Enumerated Values:
1none
2peerup
3peerdown
.1.3.6.1.4.1.10876.101.1.41.28.2.1.6
.1.3.6.1.4.1.10876.101.1.41.28.3 · 1 row entry · 10 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeRfdRtsReuseListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeRfdRtsReuseListTable'
Routes Reuse List Table. It contains the IP prefix and prefix length.
fsbgp4MpeRfdRtsReuseListEntry row .1.3.6.1.4.1.10876.101.1.41.28.3.1
Entry contains routes reuse list
Column Syntax OID
AFI of the route
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.28.3.1.1
AFI of the route
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.28.3.1.2
An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by fsbgp4RtIPPrefixLen.
Any bits beyond the length specified by fsbgp4IPPrefixLen are
zeroed.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.28.3.1.3
Length in bits of the IP address prefix in NLRI field.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.41.28.3.1.4
AFI of the remote peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.28.3.1.5
The Peer remote address of the peer where the path information was
learned.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.28.3.1.6
The figure-of-merit of the route which is in the routes reuse list
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.28.3.1.7
The time when the route figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.28.3.1.8
The value gives the status whether the route is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.28.3.1.9
The value gives the status whether the route is feasible or unfeasible
route
Enumeration
Enumerated Values:
1none
2feasibleroute
3unfeasibleroute
.1.3.6.1.4.1.10876.101.1.41.28.3.1.10
.1.3.6.1.4.1.10876.101.1.41.28.4 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeRfdPeerReuseListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeRfdPeerReuseListTable'
Peer's Reuse List Table. It contains the Peer Remote Address.
fsbgp4MpeRfdPeerReuseListEntry row .1.3.6.1.4.1.10876.101.1.41.28.4.1
Entry contains routes reuse list
Column Syntax OID
AFI of the peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.28.4.1.1
The peer remote address of the peer which is in the peer's reuse list.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.28.4.1.2
The current figure-of-merit of peer
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.28.4.1.3
The time when the figure-of-merit was updated.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.28.4.1.4
This value gives the status whether peer is suppressed or not
Enumeration
Enumerated Values:
1none
2suppressed
3unsuppressed
.1.3.6.1.4.1.10876.101.1.41.28.4.1.5
This value gives the status whether peer is up or down
Enumeration
Enumerated Values:
1none
2peerup
3peerdown
.1.3.6.1.4.1.10876.101.1.41.28.4.1.6
.1.3.6.1.4.1.10876.101.1.41.29.1 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeCommRouteAddCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeCommRouteAddCommTable'
This table is used to configure additive communities
for a given destination.
fsbgp4MpeCommRouteAddCommEntry row .1.3.6.1.4.1.10876.101.1.41.29.1.1
Routes configured additive communities Table Entry
Column Syntax OID
AFI of IP address of the destination
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.29.1.1.1
SAFI of IP address of the destination
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.29.1.1.2
IP address of the destination
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.29.1.1.3
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.29.1.1.4
Additive Community configured for the Route
Unsigned32
Constraints:
range: 65536-4294901759
range: 4294967041-4294967043
.1.3.6.1.4.1.10876.101.1.41.29.1.1.5
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.29.1.1.6
.1.3.6.1.4.1.10876.101.1.41.29.2 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeCommRouteDeleteCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeCommRouteDeleteCommTable'
This table is used to configure delete communities
for a given destination.
fsbgp4MpeCommRouteDeleteCommEntry row .1.3.6.1.4.1.10876.101.1.41.29.2.1
Routes configured delete communities Table Entry
Column Syntax OID
AFI of IP address of the destination
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.29.2.1.1
SAFI of IP address of the destination
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.29.2.1.2
IP address of the destination
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.29.2.1.3
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.29.2.1.4
Delete Community configured for the Route
Unsigned32
Constraints:
range: 65536-4294901759
range: 4294967041-4294967043
.1.3.6.1.4.1.10876.101.1.41.29.2.1.5
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.29.2.1.6
.1.3.6.1.4.1.10876.101.1.41.29.3 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeCommRouteCommSetStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeCommRouteCommSetStatusTable'
This table is used to configure the local policy of communities
for a given destination.
fsbgp4MpeCommRouteCommSetStatusEntry row .1.3.6.1.4.1.10876.101.1.41.29.3.1
Routes configured delete communities Table Entry
Column Syntax OID
AFI of IP address of the destination
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.29.3.1.1
SAFI of IP address of the destination
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.29.3.1.2
IP address of the destination
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.29.3.1.3
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.29.3.1.4
Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive communities
o setnone - to send without communities,
o modify - to strip delete communities in r…
Enumerationr/w
Enumerated Values:
1none
2set
3setnone
4modify
.1.3.6.1.4.1.10876.101.1.41.29.3.1.5
Row status for creating entries into this table.
This object can be set only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.29.3.1.6
.1.3.6.1.4.1.10876.101.1.41.30.1 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeExtCommRouteAddExtCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeExtCommRouteAddExtCommTable'
This table is used to configure additive extended communities
for a given destination.
fsbgp4MpeExtCommRouteAddExtCommEntry row .1.3.6.1.4.1.10876.101.1.41.30.1.1
Routes configured additive ext-communities Table Entry
Column Syntax OID
AFI of IP address of the destination
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.30.1.1.1
AFI of IP address of the destination
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.30.1.1.2
IP address of the destination
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.30.1.1.3
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.30.1.1.4
Additive Ext-Community for the destination
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.10876.101.1.41.30.1.1.5
Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.30.1.1.6
.1.3.6.1.4.1.10876.101.1.41.30.2 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeExtCommRouteDeleteExtCommTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeExtCommRouteDeleteExtCommTable'
This table is used to configure delete extended communities
for a given destination.
fsbgp4MpeExtCommRouteDeleteExtCommEntry row .1.3.6.1.4.1.10876.101.1.41.30.2.1
Routes configured delete ext-communities Table Entry
Column Syntax OID
AFI of IP address of the destination
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.30.2.1.1
SAFI of IP address of the destination
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.30.2.1.2
IP address of the destination
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.30.2.1.3
IP prefix length for the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.30.2.1.4
Delete Ext-Community for the destination
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.10876.101.1.41.30.2.1.5
Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.30.2.1.6
.1.3.6.1.4.1.10876.101.1.41.30.3 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeExtCommRouteExtCommSetStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeExtCommRouteExtCommSetStatusTable'
This table is used to configure the local policy of extended communities
for a given destination.
fsbgp4MpeExtCommRouteExtCommSetStatusEntry row .1.3.6.1.4.1.10876.101.1.41.30.3.1
Routes configured delete ext-communities Table Entry
Column Syntax OID
AFI of IP address of the destination
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.30.3.1.1
SAFI of IP address of the destination
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.30.3.1.2
IP address of the destination
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.30.3.1.3
IP prefix length of the destination
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.10876.101.1.41.30.3.1.4
Ext-Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive ext-communities
o setnone - to send without ext-communities,
o modify - to strip delete ext-…
Enumerationr/w
Enumerated Values:
1none
2set
3setnone
4modify
.1.3.6.1.4.1.10876.101.1.41.30.3.1.5
Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.30.3.1.6
.1.3.6.1.4.1.10876.101.1.41.30.4 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpePeerLinkBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpePeerLinkBwTable'
This table is used to configure the link bandwidths for a given peer
fsbgp4MpePeerLinkBwEntry row .1.3.6.1.4.1.10876.101.1.41.30.4.1
Peer Link Bandwidth Table Entry
Column Syntax OID
AFI of IP address of the Peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.30.4.1.1
IP address of the Peer
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.30.4.1.2
Link Bandwidth in bytes per second.This object can be set only if
fsbgp4LocalAs is configured.
Unsigned32r/w
Constraints:
range: 7000-4294967295
.1.3.6.1.4.1.10876.101.1.41.30.4.1.3
Row Status to create entries into this table.
This object can be set only if fsbgp4LocalAs is configured.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.30.4.1.4
.1.3.6.1.4.1.10876.101.1.41.31.1 · 1 row entry · 10 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeCapSupportedCapsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeCapSupportedCapsTable'
Supported Capabilities Table. This table contains, the capabilities
that are supported for particular peer
fsbgp4MpeCapSupportedCapsEntry row .1.3.6.1.4.1.10876.101.1.41.31.1.1
Entry contains supported Capabilites
Column Syntax OID
The remote IP Address of Peer
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.31.1.1.1
The remote IP Address of Peer
OctetString
Constraints:
range: 4-16
.1.3.6.1.4.1.10876.101.1.41.31.1.1.2
BGP-4 Capability Advertisement Capability Code that is supported for
peer.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.31.1.1.3
The length of the supported Capability data. Currently the
max size is set as 16. Update the BGP_MAX_CAP_DATA_SIZE in
inc/system.size file or BGP_DEF_MAX_CAP_DATA_SIZE in
inc/size.h to increase this MAX value.
Integer32
Constraints:
range: 0-251
.1.3.6.1.4.1.10876.101.1.41.31.1.1.5
The value of the supported Capability
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.10876.101.1.41.31.1.1.6
The variable displays the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.31.1.1.7
The variable displays the status whether the capability is
announced to the peer or not.
Enumeration
Enumerated Values:
1announced
2notAnnounced
.1.3.6.1.4.1.10876.101.1.41.31.1.1.8
The variable displays the status whether the capability is
received from the peer or not.
Enumeration
Enumerated Values:
1received
2notReceived
.1.3.6.1.4.1.10876.101.1.41.31.1.1.9
The variable displays the status whether the capability is
Negotiated to the peer or not.
Enumeration
Enumerated Values:
1negotiated
2notNegotiated
.1.3.6.1.4.1.10876.101.1.41.31.1.1.10
The variable displays the status whether the capability is
enabled by default or through configuration
Enumeration
Enumerated Values:
1configured
2automatic
.1.3.6.1.4.1.10876.101.1.41.31.1.1.11
.1.3.6.1.4.1.10876.101.1.41.32.1 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeRtRefreshInboundTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeRtRefreshInboundTable'
Route Refresh Inbound Table
fsbgp4MpeRtRefreshInboundEntry row .1.3.6.1.4.1.10876.101.1.41.32.1.1
Entry corresponds to Route Refresh Inbound.
Column Syntax OID
Address Family Identifier of the peer remote address
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.32.1.1.1
The IP address of the peer for which the Route Refresh request has to
be issued.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.32.1.1.2
The AFI for which the Route-Refresh message is to be sent
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.32.1.1.3
The SAFI for which the Route-Refresh message is to be sent
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.32.1.1.4
Setting this object triggers the sending of the Route Refresh message
to the peer. This object will be cleared once the Route Refresh message
is sent to the peer. Route-Refresh message support is a default feature
If no…
Enumerationr/w
Enumerated Values:
1true
.1.3.6.1.4.1.10876.101.1.41.32.1.1.5
Setting this object triggers the sending of the ORF entris in the
Route Refresh message to the peer. This object will be cleared once
the ORF message is sent to the peer. Get operation of this object will always return …
Enumerationr/w
Enumerated Values:
1true
.1.3.6.1.4.1.10876.101.1.41.32.1.1.6
.1.3.6.1.4.1.10876.101.1.41.32.2 · 1 row entry · 8 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeRtRefreshStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeRtRefreshStatisticsTable'
Route Refresh Statistics Table
fsbgp4MpeRtRefreshStatisticsEntry row .1.3.6.1.4.1.10876.101.1.41.32.2.1
Entry gives the statistics of Route Refresh.
Column Syntax OID
Address Family Identifier of the peer remote address.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.32.2.1.1
The IP address of the peer for which the Route Refresh Statistics has
to be read.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.32.2.1.2
AFI for for which the Route Refresh Statistics has
to be read.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.32.2.1.3
SAFI for for which the Route Refresh Statistics has
to be read.
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.32.2.1.4
The number of Route Refresh messages sent to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.32.2.1.5
The number of Route Refresh messages that could not be
transmitted to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.32.2.1.6
The number of Route Refresh messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.32.2.1.7
The number of invalid Route Refresh messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.32.2.1.8
.1.3.6.1.4.1.10876.101.1.41.33.1 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpeSoftReconfigOutboundTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpeSoftReconfigOutboundTable'
Soft Reconfig outbound Table
fsbgp4MpeSoftReconfigOutboundEntry row .1.3.6.1.4.1.10876.101.1.41.33.1.1
Entry corresponds to Soft Reconfig outbound.
Column Syntax OID
Address Family Identifier of the peer remote address
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.33.1.1.1
The IP address of the peer for which the outbound soft-reconfig has to
be performed.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.33.1.1.2
AFI for which the outbound soft-reconfig has to
be performed.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.33.1.1.3
SAFI for which the outbound soft-reconfig has to
be performed.
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.33.1.1.4
Setting this object triggers the outbound soft-reconfig process for the peer. This object value is cleared once the soft-reconfig process is
completed.
Enumerationr/w
Enumerated Values:
1true
.1.3.6.1.4.1.10876.101.1.41.33.1.1.5
.1.3.6.1.4.1.10876.101.1.41.34 · 1 row entry · 12 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MpePrefixCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MpePrefixCountersTable'
Additional per-peer, per AFI/SAFI counters for prefixes
fsbgp4MpePrefixCountersEntry row .1.3.6.1.4.1.10876.101.1.41.34.1
Entry containing information about a bgp-peer's prefix
counters.
Column Syntax OID
The type of the remote address of peer.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.34.1.1
The remote address of the peer.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.34.1.2
The AFI index of the per-peer, per prefix counters
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.34.1.3
The SAFI index of the per-peer, per prefix counters
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.34.1.4
Total number of discrete prefixes received from this peer. The
value in fsbgp4MpePrefixCountersPrefixesReceived will be greater
than or equal to what is in fsbgp4MpePrefixCountersInPrefixes,
since it will reflect prefi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.5
Total number of prefixes which the local BGP speaker
has announced to this peer. The value for
fsbgp4MpePrefixCountersPrefixesSent will be greater than or equal to
fsbgp4MpePrefixCountersOutPrefixes, since it reflect…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.6
Total number of prefixes withdrawn by this peer. Specifically,
this is the total number of withdrawn-routes which have
been received in UPDATE messages from this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.7
Total number of prefixes which have been reported as
withdrawn by the local BGP speaker to the peer in
locally generated UPDATE messages to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.8
The number of prefixes received from a peer and are
stored in the Adj-Ribs-In for that peer.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.9
The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are eligible to become active
in the Loc-Rib.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.10
The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are NOT eligible to become active
in the Loc-Rib.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.11
The number of prefixes for a peer that are installed
in that peer's Adj-Ribs-Out.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.34.1.12
.1.3.6.1.4.1.10876.101.1.41.35.1 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MplsVpnVrfRouteTargetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MplsVpnVrfRouteTargetTable'
This table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN.
fsbgp4MplsVpnVrfRouteTargetEntry row .1.3.6.1.4.1.10876.101.1.41.35.1.1
An entry in this table is created by an LSR (PE router)
for each route target configured for a VRF supporting
a MPLS/BGP VPN instance. The indexing provides an
ordering per-VRF instance.
Column Syntax OID
The human-readable name of this VPN. This MAY be equivalent to the
RFC2685 VPN-ID, but may also vary. If it is set to the VPN ID, it MUST
be equivalent to the value of mplsVpnVrfVpnId. It is strongly
recommended that …
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.10876.101.1.41.35.1.1.1
The route target type. If set to both means, the route target will be
assigned as import target and export target.
Enumeration
Enumerated Values:
1import
2export
3both
.1.3.6.1.4.1.10876.101.1.41.35.1.1.2
The route target distribution policy.
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.10876.101.1.41.35.1.1.3
Row status for this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.35.1.1.4
.1.3.6.1.4.1.10876.101.1.41.35.2 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MplsVpnVrfRedistributeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MplsVpnVrfRedistributeTable'
This table specifies per-VRF ipv4 redistribution.
fsbgp4MplsVpnVrfRedistributeEntry row .1.3.6.1.4.1.10876.101.1.41.35.2.1
An entry in this table is created by an LSR (PE router)
for a VRF supporting a MPLS/BGP VPN instance. The indexing
provides an ordering per-VRF instance.
Column Syntax OID
Address Family Identifier of VPN VRF redistribution and it takes only ipv4
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.35.2.1.1
Subsequent Address Family Identifier of VPN VRF redistribution and
it takes only vpnv4
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.35.2.1.2
The bit mask of source protocols from which routes are
imported to BGP.(LSB corresponds to Bit 0)

Bit 1, if set, indicates that direct routes can be
redistributed into BGP. (value = 2)

Bit…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.41.35.2.1.3
.1.3.6.1.4.1.10876.101.1.41.35.3 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4MplsVpnRRRouteTargetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4MplsVpnRRRouteTargetTable'
This table specifies Route Reflector Import Route Target set.
If the speaker is a route reflector, the import targets that are 
received from client peer, will be mainitained in a set. When there are
no more routes assoiciated with a particular import route target,
then some delay (few hours) will be allowed before deleting that route
target from the set. This table gives the information about the route
targets in the set, and the no.of routes associated individually and the
time after which it will be deleted from the set
fsbgp4MplsVpnRRRouteTargetEntry row .1.3.6.1.4.1.10876.101.1.41.35.3.1
An entry in this table is created whenever a new import route target
is received along with a route from client peers.
The index to the table is the import route target in the set itself.
Column Syntax OID
The import route target in the set.
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.10876.101.1.41.35.3.1.1
The no.of routes received/associated with this route target. i.e no.of
routes that are received with this import route target from client peers
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.41.35.3.1.2
The time after which the import route target will be removed from the set.
A value of zero indicates, it is not to be deleted. When this value is
a positive number, then the above mib object should be having a value of 0
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.41.35.3.1.3
.1.3.6.1.4.1.10876.101.1.41.36.1 · 1 row entry · 4 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsBgp4DistInOutRouteMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsBgp4DistInOutRouteMapTable'
A table describing the configuration of filtering for route map.
fsBgp4DistInOutRouteMapEntry row .1.3.6.1.4.1.10876.101.1.41.36.1.1
Information describing the filtering configuration of single entry.
Column Syntax OID
Route map name.
OctetString
Constraints:
range: 1-20
.1.3.6.1.4.1.10876.101.1.41.36.1.1.1
Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out
Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.10876.101.1.41.36.1.1.2
Distance value ( this will be unused for distribute list )
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.10876.101.1.41.36.1.1.3
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.36.1.1.4
.1.3.6.1.4.1.10876.101.1.41.39.1 · 1 row entry · 5 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsBgp4NeighborRouteMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsBgp4NeighborRouteMapTable'
A table describing the configuration of route map on a neighbour.
fsBgp4NeighborRouteMapEntry row .1.3.6.1.4.1.10876.101.1.41.39.1.1
Information describing the routemap configuration of single entry.
Column Syntax OID
Adress type of the Neighbor.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.39.1.1.1
IpAddress of the Neighbor.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.39.1.1.2
Direction of route map to indicate the route map is for in or out.
In direction routemap is to apply the routemap rules for incoming routes from
the peer.Out direction routemap is to apply the routemap for on the
adver…
Enumeration
Enumerated Values:
1in
2out
.1.3.6.1.4.1.10876.101.1.41.39.1.1.3
Route map name.
OctetStringr/w
Constraints:
range: 1-20
.1.3.6.1.4.1.10876.101.1.41.39.1.1.4
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.39.1.1.5
.1.3.6.1.4.1.10876.101.1.41.40 · 1 row entry · 36 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsBgp4PeerGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsBgp4PeerGroupTable'
A table for configuring the bgp peer groups. Configuring
a property for the peer group copies it to all the peers 
present in the peer group.
fsBgp4PeerGroupEntry row .1.3.6.1.4.1.10876.101.1.41.40.1
An entry describing the bgp peer group.
Column Syntax OID
The group name for this peer group entry.
OctetString
Constraints:
range: 1-20
.1.3.6.1.4.1.10876.101.1.41.40.1.1
The address type of the peers added to this peer group.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.40.1.2
The remote autonomous system number for this peer group.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.41.40.1.3
Time interval (in seconds) for the Hold Time configured for this
BGP speaker with all the peers configured for this group.
This value is placed in an OPEN message sent to the peers
by this BGP speaker. This value mus…
Integer32r/w
Constraints:
range: 0-0
range: 3-65535
.1.3.6.1.4.1.10876.101.1.41.40.1.4
Time interval (in seconds) for the KeepAlive timer configured for this
BGP speaker with all the peers configured in this group. The value
of this object will only determine the KEEPALIVE messages frequency
relative t…
Integer32r/w
Constraints:
range: 0-21845
.1.3.6.1.4.1.10876.101.1.41.40.1.5
Time interval in seconds for the ConnectRetry timer for the peers
in this group. The suggested value for this timer is 120 seconds.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.40.1.6
Time interval (in seconds) for the MinASOriginationInterval
timer for all peers configured in this group.
The suggested value for this timer is 15 seconds.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.40.1.7
Time interval (in seconds) for the MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30 seconds for EBGP connections
and 5 seconds for IBGP connections.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.40.1.8
This MIB object specifies whether BGP session with the peers in the
peer group can be started automatically. This object when set to
'disabled', requires manual start for initiating BGP session with the peer via
MIB o…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.40.1.9
This MIB object specifies whether BGP session with the peers in the
peer group need to be automatically stopped after a TCP connect-retry
count value specified by 'fsBgp4PeerGroupTcpConnectRetryCnt'.
The resources allo…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.40.1.10
IdleHoldTime specifies the length of time the BGP peers in this
peer group is held in Idle state prior to allowing the next
automatic restart. The IdleHoldTime is configured only when the
fsBgp4PeerGroupAllowAutomaticS…
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.41.40.1.11
The DampPeerOscillations option specifies that the implementation
engages additional logic to damp the oscillations of BGP peers in
the face of series of automatic start and automatic stop operations
in the IDLE state.T…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.40.1.12
This MIB object allows configuration option to enable/disable delay
in sending of OPEN messages to the BGP peers for a specific time period
(DelayOpenTime). The delay allows the remote BGP Peers to send the first
OPEN m…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.40.1.13
The DelayOpen time specifies the amount of time the BGP Peers should
delay in sending the OPEN message to the remote peers. If the
fsBgp4PeerGroupDelayOpen option is enabled, the DelayOpen time can be
configured. The de…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.41.40.1.14
BGP speaker imposes a locally-configured, upper bound on the number of
address prefixes the speaker is willing to accept from a neighbor. The
default value is calculated as the following:
fsbgp4MaxNoofRoutes / fsbgp4Max…
Integer32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.41.40.1.15
This counter denotes the Maximum number of times the BGP Peers have
tried to issue a TCP-Connect with its neighboring peers.
The default value for the counter is set as 5.
Integer32r/w
Constraints:
range: 1-50
.1.3.6.1.4.1.10876.101.1.41.40.1.16
This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected EBGP peers are allowed.
The configuration…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.40.1.17
This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected and seperated by a maximum hop limit as configured by this
object. The configu…
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.10876.101.1.41.40.1.18
This object specifies how the next hop attribute sent in the update
messages to the peers in this peer group. When the object takes the
value of self,the next Hop attribute will always be the sender Local
Address else …
Enumerationr/w
Enumerated Values:
1automatic
2self
.1.3.6.1.4.1.10876.101.1.41.40.1.19
This object specifies whether the peers in this peer group are
Client peers or Non-Client peers. By default, the peers are
created as Non-Client Peer.
Enumerationr/w
Enumerated Values:
1nonClient
2client
.1.3.6.1.4.1.10876.101.1.41.40.1.20
This object configures the tcp window size on the sender side
for all the peers in this peer group.
Integer32r/w
Constraints:
range: 4096-65536
.1.3.6.1.4.1.10876.101.1.41.40.1.21
This object configures the tcp window size on the receiver side
for all the peers in this peer group.
Integer32r/w
Constraints:
range: 4096-65536
.1.3.6.1.4.1.10876.101.1.41.40.1.22
Community Send status for the peers in this peer group.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer.
Enumerationr/w
Enumerated Values:
1none
2send
3donotsend
.1.3.6.1.4.1.10876.101.1.41.40.1.23
Extended Community Send status for the peers in this peer group.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to this peer.
Enumerationr/w
Enumerated Values:
1none
2send
3donotsend
.1.3.6.1.4.1.10876.101.1.41.40.1.24
This object is used to set the peers in this group to be active,
that means the speaker will not initiate the session with the peers
instead it waits for the remote peers to initiate the session
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.40.1.25
This object is used to enable/disable the advertisement
of the default route to all the peers in this peer group.
This object overrides the global default route configuration
(fsbgp4DefaultOriginate) and always send a …
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.10876.101.1.41.40.1.26
This object is set to activate the corresponding MP Capability.
If any of MP Capability is activated, then this capability should
be negotiated while establishing session with the peers in this group.
Any get on this ob…
Enumerationr/w
Enumerated Values:
1ipv4unicast
2ipv6unicast
.1.3.6.1.4.1.10876.101.1.41.40.1.27
This object is set to deactivate the corresponding MP Capability.
If any of MP Capability is deactivated, then this capability should
not be negotiated while establishing session with the peers in this group.
Any get on…
Enumerationr/w
Enumerated Values:
1ipv4unicast
2ipv6unicast
.1.3.6.1.4.1.10876.101.1.41.40.1.28
This object is used to configure the in routemap for this peer group entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.40.1.29
This object is used to configure the out routemap for this peer group entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.40.1.30
This object is used to create the peer group or delete the group.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.40.1.31
This object is used to configure the IP Prefix list name in IN direction for this peer group entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.40.1.32
This object is used to configure the IP Prefix list name in OUT direction for this peer group entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.10876.101.1.41.40.1.33
This object is used to configure the ORF type supported for this peer group entry.
This object should be set before enabling the ORF mode fsBgp4PeerGroupOrfCapMode.
Now the Address Prefix ORF type (value 64) is only sup…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.40.1.34
This object is used to configure the ORF Capability mode supported for this peer group entry.
If it is set to ZERO, then the both ORF modes will be disabled
Enumerationr/w
Enumerated Values:
0disable
1receive
2send
3both
.1.3.6.1.4.1.10876.101.1.41.40.1.35
This object is to trigger the ORF messages to the peers associated with this peer group entry.
Once the ORF messags are transmitted, this object will be cleared.
Get operation of this object will always return ZERO.
Enumerationr/w
Enumerated Values:
1true
.1.3.6.1.4.1.10876.101.1.41.40.1.36
.1.3.6.1.4.1.10876.101.1.41.41 · 1 row entry · 3 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsBgp4PeerGroupListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsBgp4PeerGroupListTable'
A table for adding/removing the bgp peers to a peer group.
fsBgp4PeerGroupListEntry row .1.3.6.1.4.1.10876.101.1.41.41.1
An entry describing the bgp peer group list.
Column Syntax OID
This object specifies the address type of the BGP peer entry
added to this peer group entry
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.41.1.1
This object specifies the remote address of the BGP peer entry
added to this peer group entry
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.41.1.2
This object is used to add or remove the bgp peer specified through
fsBgp4PeerAddress to this bgp peer group entry.
Enumerationr/w
Enumerated Values:
1add
2delete
.1.3.6.1.4.1.10876.101.1.41.41.1.3
.1.3.6.1.4.1.10876.101.1.41.42.1 · 1 row entry · 6 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4TCPMKTAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4TCPMKTAuthTable'
TCP MKT Authentication Table, used for configuring MKT for TCP-AO 
authentication, supported algorithms HMAC-SHA-1 and AES-128-CMAC
fsbgp4TCPMKTAuthEntry row .1.3.6.1.4.1.10876.101.1.41.42.1.1
Entry corresponds to the TCP MKT parameters
Column Syntax OID
Send KeyID of the MKT. This object value is used to fill the key-id
field in the TCP-AO option in the TCP header
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.42.1.1.1
Receive Key-id of the MKT. Receive Key-id of the MKT.
The MKT that is ready at the sender to
be used to authenticate received segments is indicated to the
peer by filling the receive key id of the MKT in the RNExtKey…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.42.1.1.2
Master Key corresponding to the MKT
OctetStringr/w
Constraints:
range: 1-80
.1.3.6.1.4.1.10876.101.1.41.42.1.1.3
Algorithm used for TCP-AO MAC or KDF calculation, allowed
algorithms are HMAC-SHA-1 & AES-128-CMAC,
default value is HMAC-SHA-1
Enumerationr/w
Enumerated Values:
1hmacSha1
2aes128Cmac
.1.3.6.1.4.1.10876.101.1.41.42.1.1.4
Exclude TCP options other than TCP-AO during MAC calculation,
if fsMIBgp4TCPMKTAuthTcpOptExc is not set TCP-AO MAC will
be calculated on tcp segment including all other TCP options
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.10876.101.1.41.42.1.1.5
This variable represents the status of the MKT entry, can
have values allowed for RowStatus, eg. createAndGo, destroy etc
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.10876.101.1.41.42.1.1.6
.1.3.6.1.4.1.10876.101.1.41.43.1 · 1 row entry · 8 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsbgp4TCPAOAuthPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsbgp4TCPAOAuthPeerTable'
TCP-AO Peer config Table
fsbgp4TCPAOAuthPeerEntry row .1.3.6.1.4.1.10876.101.1.41.43.1.1
Entry corresponds to the TCP-AO configs for peer,
Support for associating one keyId(MKT) per peer is available at
present. If a new keyId/MKT is associated with a peer which
already has one associated keyId/MKT, exist…
Column Syntax OID
The IP address type of the peer IP address
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.43.1.1.1
The IP address of this the peer for which TCP-AO config is done
OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.10876.101.1.41.43.1.1.2
Key id of the MKT which need to be associated with the peer
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.41.43.1.1.3
While doing a write on the object(snmpset) the value
'set(1)' will associate the MKT with KeyId mentioned
in the index to the peer
'clear(2)' will clear/dissociate the keyId mentioned
in the ind…
Enumerationr/w
Enumerated Values:
1set
2clear
.1.3.6.1.4.1.10876.101.1.41.43.1.1.4
The date & time the router will start accepting packets that have
been created with the MKT specified by the key-id
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.10876.101.1.41.43.1.1.5
The date & time the router will start using the MKT specified
by the key-id for packets generation
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.10876.101.1.41.43.1.1.6
The date & time the router will stop using the MKT specified by
the key-id for packets generation.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.10876.101.1.41.43.1.1.7
The date & time the router will stop accepting packets that have
been created with the MKT specified by the key-id.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.10876.101.1.41.43.1.1.8
.1.3.6.1.4.1.10876.101.1.41.44 · 1 row entry · 11 columns
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsBgp4ORFListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-BGP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-BGP-MIB::fsBgp4ORFListTable'
A table for adding/removing Ooutbound Route Filter entries received from the peer
fsBgp4ORFListEntry row .1.3.6.1.4.1.10876.101.1.41.44.1
An entry describing the bgp ORF list.
Column Syntax OID
This object specifies the address type of the BGP peer
asspciated with this ORF entry
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.44.1.1
This object specifies the remote address of the BGP peer associated
with this ORF entry
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.44.1.2
This object specifies the type of IP address prefix in the ORF entry.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.10876.101.1.41.44.1.3
This object specifies the Sub-sequent address family of
IP address prefix in the ORF entry.
BgpSafi
Type Values:
0unknown
1unicast
4labelledIpv4
128vpnv4
.1.3.6.1.4.1.10876.101.1.41.44.1.4
This object specifies the type of the ORF entry.
Currently it supports only Address-Prefix based ORF type (64)
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.44.1.5
This object specifies the sequential order in which a route should be
matched against an ORF entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.41.44.1.6
This object specifies the IP address prefix for which the ORF rule was specified.
InetAddress
Type Constraints:
range: 0..40
.1.3.6.1.4.1.10876.101.1.41.44.1.7
This object specifies the length of the IP address prefix length in bits which will be
considered when matching a route with the ORF entry.
Unsigned32
Constraints:
range: 0-128
.1.3.6.1.4.1.10876.101.1.41.44.1.8
This object specifies the minimum prefix-length in bits for a IP address prefix.
Any route with prefix-length equal to or greater than this length will be
considered as a match, if fsBgp4ORFMaxLength is not specified.
I…
Unsigned32
Constraints:
range: 0-128
.1.3.6.1.4.1.10876.101.1.41.44.1.9
This object specifies the maximum prefix-length in bits for a IP address prefix.
Any route with prefix-length equal to or less than this length will be
considered as a match, if fsBgp4ORFMinLength is not specified.
If i…
Unsigned32
Constraints:
range: 0-128
.1.3.6.1.4.1.10876.101.1.41.44.1.10
This object specifies the action to be taken for a particular route
if it matches with the ORF rules defined in this particular ORF entry.
If it is PERMIT, then the matched route will be advertised to the peer.
Else if …
Enumeration
Enumerated Values:
0permit
1deny
.1.3.6.1.4.1.10876.101.1.41.44.1.11