SUB10SYSTEMS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
22
Rows
22
Columns
254
.1.3.6.1.4.1.39003.3.1.1.15
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitLclAlarmStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitLclAlarmStateTable'
The table listing the each active alarm the local unit.
An active alarm is where the alarm state is 'raised' at the
specific severity level.
The entries in the table correspond to the configured entries in
sub10UnitMgmtAlarmTable.
This table has a single entry per alarm where the index to the table is
the same index as the associated Alarm configuration
table sub10UnitMgmtAlarmTable.
An entry (row) in the sub10UnitLclAlarmStateTable.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| sub10UnitLclAlarmStateIndexThe sub10UnitLclAlarmStateTable index. The index represents the same index as used in sub10UnitMgmtAlarmTable. The entries in the table correspond to the configured entries in sub10UnitMgmtAlarmTable. | Sub10AlarmIndex Type Constraints: range: 1..128 | .1.3.6.1.4.1.39003.3.1.1.15.1.1 | ||||||
| sub10UnitLclAlarmStateInternal object to indicate if this alarm is currently in the raised or cleared state. | Sub10AlarmState Constraints: range: 1-256Type Values:
| .1.3.6.1.4.1.39003.3.1.1.15.1.2 | ||||||
| sub10UnitLclAlarmStateTimeThe local date and time when the last Alarm State transition occurred. This object facilitates retrieving all instances of alarms that have been raised or have changed state since a given point in time. … | Sub10DateTime Type Constraints: range: 19 | .1.3.6.1.4.1.39003.3.1.1.15.1.3 |
sub10UnitMgmtUserTable
table.1.3.6.1.4.1.39003.3.2.4.2
·
1 row entry
·
6 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtUserTable'
The table listing the users configured on the unit.
The number of user entries is sub10UnitMgmtUsersNumber.
This table is indexed by user name (sub10UnitMgmtUserName).
Multiple entries with the same sub10UnitMgmtUserName are not possible.
NB. As part of SNMPv3 support this table will be superceded by 'usmUserTable'.
An entry (row) in the sub10UnitMgmtUserTable.
If the rowStatus is set to notInService(2) then
the entry is not valid and no columnar objects are returned.
Usage is as follows:
active(1) - Entry is cre…
If the rowStatus is set to notInService(2) then
the entry is not valid and no columnar objects are returned.
Usage is as follows:
active(1) - Entry is cre…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sub10UnitMgmtUserIndexThe sub10UnitMgmtUserTable index. | Unsigned32 Constraints: range: 1-16 | .1.3.6.1.4.1.39003.3.2.4.2.1.1 | ||||||||||||
| sub10UnitMgmtUserRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.39003.3.2.4.2.1.2 | ||||||||||||
| sub10UnitMgmtUserNameThe unique user name provided by the system administrator. | OctetStringr/w Constraints: range: 1-32range: 1-256 | .1.3.6.1.4.1.39003.3.2.4.2.1.3 | ||||||||||||
| sub10UnitMgmtUserGroupThe user group provided by the system administrator. This restricts a user to certain key functions on the web GUI. | Sub10UserGroupr/w Type Values:
| .1.3.6.1.4.1.39003.3.2.4.2.1.4 | ||||||||||||
| sub10UnitMgmtUserPasswordThe unique user password provided by the system administrator. This object can be set but is not visible when read. | OctetStringr/w Constraints: range: 6-32 | .1.3.6.1.4.1.39003.3.2.4.2.1.5 | ||||||||||||
| sub10UnitMgmtUserPasswordVerifyThe unique user password provided by the system administrator use to verify the setting of sub10UnitMgmtUserPassword. This object can be set but is not visible when read. | OctetStringr/w Constraints: range: 6-32 | .1.3.6.1.4.1.39003.3.2.4.2.1.6 |
sub10UnitMgmtAlarmTable
table.1.3.6.1.4.1.39003.3.2.6.1
·
1 row entry
·
18 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmTable'
The sub10UnitMgmtAlarmTable defines the alarm configuration.
The first 'N' rows of the table is reserved for fixed alarms
defined by the manufacturer. Fixed alarms cannot be deleted or their
names changed, other attributes of a fixed alarm may be modified.
The remainder of rows are available for user defined alarms which
can be created and deleted. The index value 'N' is defined by
'sub10UnitMgmtAlarmsUserDefStart'. Any attempt to create or delete a row
in the table with an index less than value of 'sub10UnitMgmtAlarmsUserDefStart'
will be rejected.
This table is indexed by alarm index a number ranging from 1
to the maximum number of entries in the alarm table.
User defined alarm name and and alarm severity are configurable allowing multiple
entries for the same alarm to be raised at different severity levels
according to different threshold levels. A user defined alarm can be created
with the same name as a fixed alarm if required. For example the fixed alarm
'Rx Power Low' monitors the radio receive power and raises an alarm if the
value is less than a certain threshold. A user defined alarm may be created
with the same name but a less stringent threshold and a lower seveirty level.
This allows same alarms to be raised at increasing severity as the condition
causing the alarm worsens.
This table allows configuration of threshold passing behavior,
threshold values for both raising and clearing the alarms and
the perceived severity. The alarm forwarding mechanisms can
be defined for example SNMP trap, syslog and SMTP.
No validation of thresholds across different entries of the table
therefore the administrator must ensure that thresholds are correctly
set accordingly for the severity of each alarm. This is particularly
important where a single alarm name is configured to be raised at
different severity levels.
An entry (row) in the sub10UnitMgmtAlarmTable.
If the rowStatus is set to notInService(2) then
the entry is not valid and no columnar objects are returned.
If the rowStatus is set to notInService(2) then
the entry is not valid and no columnar objects are returned.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sub10UnitMgmtAlarmIndexThe sub10UnitMgmtAlarmTable index. | Sub10AlarmIndex Type Constraints: range: 1..128 | .1.3.6.1.4.1.39003.3.2.6.1.1.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.39003.3.2.6.1.1.2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmNameThe alarm name. This is a short descriptive name for the alarm. Alarm names can be duplicated across entries in order to define the same alarm to be raised and cleared according to different thresholds and different sev… | Sub10AlarmNamer/w Type Constraints: range: 1..32 | .1.3.6.1.4.1.39003.3.2.6.1.1.3 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmSeverityThe alarm severity. This is added to each alarm as a parameter. | Sub10AlarmSeverityr/w Constraints: range: 1-256Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmMeasObjectThe measured object. This is the object name of the object in the MIB with which the alarm is associated and which the configured thresholds are compared with when deriving the state of the alarm. It is n… | Sub10MeasuredObjectr/w Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmMonitorIntvlThe interval in seconds when the measured object is to be read and compared with the raise and clear thresholds. An alarm cannot be raised or cleared quicker than the configured interval. Please also see related sub10Un… | Unsigned32r/w Constraints: range: 1-86400 | .1.3.6.1.4.1.39003.3.2.6.1.1.6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmRaiseOperType of operation which determines when an alarm is to be raised. Definition of each type is as follows: lt - Measured objects value is less than raise threshold gt - Measured objects value… | Sub10AlarmOperationr/w Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.7 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmRaiseThreshThe threshold value which the measured object's value crosses causes the alarm to be raised. The behaviour of a measured value and alarm threshold comparison is defined by the object sub10UnitMgmtAlarmThreshType. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.6.1.1.8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmClearOperType of operation which determines when an alarm is to be cleared. Definition of each type is as follows: lt - Measured objects value is less than clear threshold gt - Measured objects valu… | Sub10AlarmOperationr/w Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.9 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmClearThreshThe threshold value which the measured object's value crosses causes the alarm to be cleared. The behaviour of a measured value and alarm threshold comparison is defined by the object sub10UnitMgmtAlarmThreshType. … | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.6.1.1.10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmRaiseIntvlsThe number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the raise threshold before the alarm state is set to raised. This is intended to reduce the number… | Unsigned32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.39003.3.2.6.1.1.11 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmClearIntvlsThe number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the clear threshold before the alarm state is set to cleared. This is intended to reduce the numbe… | Unsigned32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.39003.3.2.6.1.1.12 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmTypeThe type of the alarm and defines the type of notification (trap) used to inform management entities. | Sub10AlarmTyper/w Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.13 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmSmtpAddressThe smtp mail address. If set the alarm is suitable formatted and sent to the given mail address. | OctetStringr/w Constraints: range: 0-63 | .1.3.6.1.4.1.39003.3.2.6.1.1.14 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmToSyslogIf set to 'enabled' the alarm is suitably formatted and sent to syslog. | Sub10Stater/w Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.15 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmEnabledIf set to 'enabled' the alarm is enabled. | Sub10Stater/w Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.16 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmMeasObjectValThe value of sub10UnitMgmtAlarmMeasObject formatted as a displayString which when measured by the alarm subsystem caused an alarm to be either raised or cleared. This is therefore the value of the object which was compa… | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.6.1.1.17 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| sub10UnitMgmtAlarmToSNMPIf set to 'enabled' the alarm is forwarded as an SNMP notification / trap. | Sub10Stater/w Type Values:
| .1.3.6.1.4.1.39003.3.2.6.1.1.18 |
.1.3.6.1.4.1.39003.3.2.7.5
·
1 row entry
·
4 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtSnmpTrpDstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpTrpDstTable'
The table listing the each trap destination the local unit. Each trap destination has an IpAddress and a trap community string
An entry (row) in the sub10UnitMgmtSnmpTrpDstTable.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sub10UnitMgmtSnmpTrpDstIndexThe sub10UnitMgmtSnmpTrpDstTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | Unsigned32 Constraints: range: 1-3range: 1-256 | .1.3.6.1.4.1.39003.3.2.7.5.1.1 | ||||||||||||
| sub10UnitMgmtSnmpTrpDstRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.39003.3.2.7.5.1.2 | ||||||||||||
| sub10UnitMgmtSnmpTrpDstIpAddrThe administratively assigned SNMP Trap Destination IP. | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.39003.3.2.7.5.1.3 | ||||||||||||
| sub10UnitMgmtSnmpTrpDstCommunityThe trap community name sent with each trap to this trap destination. The trap community allows for some security in the target management terminal | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.7.5.1.4 |
.1.3.6.1.4.1.39003.3.2.7.15
·
1 row entry
·
8 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtSnmpUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpUserTable'
The table of SNMPv3 User configuration.
An entry (row) in the sub10UnitMgmtSnmpUserTable.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sub10UnitMgmtSnmpUserIndexThe sub10UnitMgmtSnmpUserTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | Unsigned32 Constraints: range: 1-10 | .1.3.6.1.4.1.39003.3.2.7.15.1.1 | ||||||||||||
| sub10UnitMgmtSnmpUserRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally… | SNMPv2-TCRowStatusr/w Constraints: range: 1-256Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.39003.3.2.7.15.1.2 | ||||||||||||
| sub10UnitMgmtSnmpUserNameThe administratively assigned SNMPv3 User name. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.7.15.1.3 | ||||||||||||
| sub10UnitMgmtSnmpUserGroupThe user group type. Authentication and Privacy policies are assigned to a user group and not individual users. | Sub10UserGroupr/w Constraints: range: 1-256Type Values:
| .1.3.6.1.4.1.39003.3.2.7.15.1.4 | ||||||||||||
| sub10UnitMgmtSnmpUserAuthPwdThe unique SNMPv3 authentication protocol password provided by the system administrator. This object can be set but is not visible when read. | OctetStringr/w Constraints: range: 6-32range: 1-256 | .1.3.6.1.4.1.39003.3.2.7.15.1.5 | ||||||||||||
| sub10UnitMgmtSnmpUserAuthPwdChkThe unique SNMPv3 authentication protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserAuthPassword. This object can be set but is not visible when read. | OctetStringr/w Constraints: range: 6-32range: 1-256 | .1.3.6.1.4.1.39003.3.2.7.15.1.6 | ||||||||||||
| sub10UnitMgmtSnmpUserPrivPwdThe unique SNMPv3 privacy protocol password provided by the system administrator. This object can be set but is not visible when read. | OctetStringr/w Constraints: range: 6-32range: 1-256 | .1.3.6.1.4.1.39003.3.2.7.15.1.7 | ||||||||||||
| sub10UnitMgmtSnmpUserPrivPwdChkThe unique SNMPv3 privacy protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserPrivPassword. This object can be set but is not visible when read. | OctetStringr/w Constraints: range: 6-32range: 0-255 | .1.3.6.1.4.1.39003.3.2.7.15.1.8 |
.1.3.6.1.4.1.39003.3.2.7.16
·
1 row entry
·
4 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtSnmpAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpAccessTable'
The table of SNMPv3 Access configuration.
An entry (row) in the sub10UnitMgmtSnmpAccessTable.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sub10UnitMgmtSnmpAccessIndexThe sub10UnitMgmtSnmpAccessTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | Unsigned32 Constraints: range: 1-3 | .1.3.6.1.4.1.39003.3.2.7.16.1.1 | ||||||||||||
| sub10UnitMgmtSnmpAccessRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.39003.3.2.7.16.1.2 | ||||||||||||
| sub10UnitMgmtSnmpAccessNameThe administratively assigned SNMPv3 access name. This is used as an alias for the access address for purposes of identification. The name is not used in the SNMP protocol. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.7.16.1.3 | ||||||||||||
| sub10UnitMgmtSnmpAccessIpAddrThe administratively assigned SNMP access IP address. Only SNMP requests from this address will be serviced by the SNMP agent. | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.39003.3.2.7.16.1.4 |
.1.3.6.1.4.1.39003.3.2.7.17
·
1 row entry
·
5 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtSnmpTargetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpTargetTable'
The table of SNMPv3 Target configuration. This table defines the addresses of target SNMPv3 managers to send Notifications.
An entry (row) in the sub10UnitMgmtSnmpTargetTable.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
If the rowStatus is set to notInService(2) then the entry
is not valid and no columnar objects are returned.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sub10UnitMgmtSnmpTargetIndexThe sub10UnitMgmtSnmpTargetTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | Unsigned32 Constraints: range: 1-3range: 1-256 | .1.3.6.1.4.1.39003.3.2.7.17.1.1 | ||||||||||||
| sub10UnitMgmtSnmpTargetRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.39003.3.2.7.17.1.2 | ||||||||||||
| sub10UnitMgmtSnmpTargetNameThe administratively assigned SNMPv3 target name. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.7.17.1.3 | ||||||||||||
| sub10UnitMgmtSnmpTargetIpAddrThe administratively assigned SNMP target IP address. When enabled SNMPv3 Notifications are sent to this address. | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.39003.3.2.7.17.1.4 | ||||||||||||
| sub10UnitMgmtSnmpTargetUserNameThe administratively assigned SNMPv3 target user name. The security model configured for this user is used when sending notifications to the target address. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.39003.3.2.7.17.1.5 |
.1.3.6.1.4.1.39003.3.2.9.6
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtFirmwareBankTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtFirmwareBankTable'
This tables contains information regarding the firmware banks.
An entry (row) in the sub10UnitMgmtFirmwareBankTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10UnitMgmtFirmwareBankIndexThe sub10UnitMgmtFirmwareBankTable index. | Sub10FirmwareBank Type Constraints: range: 1..3 | .1.3.6.1.4.1.39003.3.2.9.6.1.1 |
| sub10UnitMgmtFirmwareBankVersionThe firmware version currently installed in this bank. | OctetString Constraints: range: 0-15 | .1.3.6.1.4.1.39003.3.2.9.6.1.2 |
| sub10UnitMgmtFirmwareBankImageThe firmware image name currently installed in this bank. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.39003.3.2.9.6.1.3 |
sub10UnitMgmtDNSTable
table.1.3.6.1.4.1.39003.3.2.10.1
·
1 row entry
·
2 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10UnitMgmtDNSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10UnitMgmtDNSTable'
This tables defines the Domain Name Servers.
An entry (row) in the sub10UnitMgmtDNSTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10UnitMgmtDNSIndexThe sub10UnitMgmtDNSTable index. | Unsigned32 Constraints: range: 1-2 | .1.3.6.1.4.1.39003.3.2.10.1.1.1 |
| sub10UnitMgmtDNServerThe administratively assigned DNS server IP for the unit. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus p… | OctetStringr/w Constraints: range: 7-15 | .1.3.6.1.4.1.39003.3.2.10.1.1.2 |
.1.3.6.1.4.1.39003.4.2.2.8
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthMgmtVlanAllowedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthMgmtVlanAllowedTable'
This tables defines the VLANs that are allowed to pass through the ethernet
interface. The table is only used when the value of sub10EthMgmtVlanFiltering is enabled.
The table only contains an entry if the specific vlan is to be allowed to flow through the interface.
If a VLAN is not in the table then the ethernet frame is dropped.
If sub10EthMgmtVlanFiltering is enabled this table must contain at least 1 VLAN.
IMPORTANT: This object is controlled by transaction management.
Any changes to this object must be transactionally acknowledged
following a successful set thus protecting against loss of
communication with the unit. To acknowledge the transaction
set the object sub10UnitMgmtTransaction to transactionCommit(2).
An entry (row) in the sub10UnitMgmtVlanTable.
If the rowStatus is set to notInService(2) then
the entry is not valid and no columnar objects are returned.
If the rowStatus is set to notInService(2) then
the entry is not valid and no columnar objects are returned.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sub10EthMgmtVlanAllowedIndexThe sub10EthMgmtVlanTable index. | Unsigned32 Constraints: range: 1-60 | .1.3.6.1.4.1.39003.4.2.2.8.1.1 | ||||||||||||
| sub10EthMgmtVlanAllowedRowStatusThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.39003.4.2.2.8.1.2 | ||||||||||||
| sub10EthMgmtVlanAllowedIdThe vlan id which is allowed to pass through the ethernet interface. Duplicate vlan ids in multiple entries of the table with RowStatus 'active(1) are not allowed and any attempt to set a duplicate active entry will be … | Sub10VlanIdr/w Type Constraints: range: 0..4095 | .1.3.6.1.4.1.39003.4.2.2.8.1.3 |
sub10EthMgmtQoSQTable
table.1.3.6.1.4.1.39003.4.2.3.4
·
1 row entry
·
6 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthMgmtQoSQTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthMgmtQoSQTable'
This table configures the characteristics of a Quality of
Service queue. There are a fixed number of 8 queues in total
and therefore 8 entries in this table indexed 1 thru 8.
The number of queue entries in the table is given by the value
of sub10EthMgmtQoSQNumber.
An entry (row) in the sub10EthMgmtQoSQTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| sub10EthMgmtQoSQIndexThe queue number used as an index, fixed to 8 standard queues. | Unsigned32 Constraints: range: 1-8 | .1.3.6.1.4.1.39003.4.2.3.4.1.1 | ||||
| sub10EthMgmtQoSQSchedulingTypeThe scheduling discipline applied to the queue. qosSPQ - Strict Priority Queueing Queues are serviced in strict priority order. Packets on the queue are servicedd and transmitted until eith… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.39003.4.2.3.4.1.2 | ||||
| sub10EthMgmtQoSQDWRRWeightA percentage weighting factor used to calculate the quantum value used to calculate the starting transmission credit at each visit of the queue scheduler. Only for scheduling type Deficit Weighted Round Robin. sub10Eth… | Unsigned32r/w Constraints: range: 0-100 | .1.3.6.1.4.1.39003.4.2.3.4.1.3 | ||||
| sub10EthMgmtQoSQCongestionPolicyThe policy used when a queue is congested. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.39003.4.2.3.4.1.4 | ||||
| sub10EthMgmtQoSQSizeMaxThe maximum size of the queue expressed in packets. | Unsigned32 Constraints: range: 0-4294967295range: 1-256 | .1.3.6.1.4.1.39003.4.2.3.4.1.5 | ||||
| sub10EthMgmtQoSQLenThe current length of the queue expressed in packets. | Unsigned32 Constraints: range: 0-4294967295range: 0-255 | .1.3.6.1.4.1.39003.4.2.3.4.1.6 |
sub10EthMgmtQoSVlanTable
table.1.3.6.1.4.1.39003.4.2.3.6
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthMgmtQoSVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthMgmtQoSVlanTable'
This table configures the Quality of Service
Vlan to queue mapping.
Multiple Vlans may be mapped to any queue. On egress of the
ethernet interface all pkts tagged with the specific Vlan Id
are inserted onto the specified queue.
See sub10EthMgmtQoSQTable for more information on QoS
queueing.
The number of entries in the table is given by the value
of sub10EthMgmtQoSVlanNumber.
An entry (row) in the sub10EthMgmtQoSVlanMappingTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10EthMgmtQoSVlanIndexThe sub10EthMgmtQoSVlanMappingTable index. | Unsigned32 Constraints: range: 1-16 | .1.3.6.1.4.1.39003.4.2.3.6.1.1 |
| sub10EthMgmtQoSVlanIdThe vlan id used as an index to the table and which is egressing through the ethernet interface and which should be placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex. | Sub10VlanIdr/w Constraints: range: 1-256 | .1.3.6.1.4.1.39003.4.2.3.6.1.2 |
| sub10EthMgmtQoSVlanQueueThe queue number which identifies the specific queue where the packets that are tagged with the Vlan Id specified in sub10EthMgmtQoSVlanId are inserted. | Sub10QoSQueuer/w Constraints: range: 0-255 | .1.3.6.1.4.1.39003.4.2.3.6.1.3 |
sub10EthMgmtQoSPCPTable
table.1.3.6.1.4.1.39003.4.2.3.8
·
1 row entry
·
2 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthMgmtQoSPCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthMgmtQoSPCPTable'
This table configures the Quality of Service Priority
Code Point (PCP) or Pbits to queue mapping.
Multiple PCPs may be mapped to the same queue but the same
PCP cannot be mapped to more than one queue. This table
has a maximum size of 8 entries with exactly 1 entry per
PCP bit.
On egress of the ethernet interface all pkts tagged with the
specific PCP bit (irrespective of its Vlan Id) is inserted
on the specified queue.
See sub10EthMgmtQoSQTable for more information on QoS
queueing.
The number of entries in the table is given by the value
of sub10EthMgmtQoSPCPMappingNumber (maximum 8).
An entry (row) in the sub10EthMgmtQoSPCPMappingTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10EthMgmtQoSPCPIndexThe sub10EthMgmtQoSPCPTable index. This represents the PCP bits priority value. sub10EthMgmtQoSPCPIndex(1)=PCPBit(0) sub10EthMgmtQoSPCPIndex(2)=PCPBit(1) sub10EthMgmtQoSPCPIndex(3)=PCPBit(2) sub10EthMgmtQ… | Unsigned32 Constraints: range: 1-8 | .1.3.6.1.4.1.39003.4.2.3.8.1.1 |
| sub10EthMgmtQoSPCPQueueThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific PCP bit sub10EthMgmtQoSPCPIndex are inserted. There are up to 8 queues. | Sub10QoSQueuer/w Constraints: range: 1-256 | .1.3.6.1.4.1.39003.4.2.3.8.1.2 |
sub10EthMgmtQoSDSCPTable
table.1.3.6.1.4.1.39003.4.2.3.10
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthMgmtQoSDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthMgmtQoSDSCPTable'
This table configures the Quality of Service Differentiated
Services Code Point (DSCP) to queue mapping.
Multiple DSCPs may be mapped to the same queue but the same
DSCP cannot be mapped to more than one queue. This table has
a maximum size of 64 with 1 entry per DSCP value.
On egress of the ethernet interface all pkts tagged with the
specific DSCP marking in the IP header will be inserted
onto the specified queue.
See sub10EthMgmtQoSQTable for more information on QoS
queueing.
The number of entries in the table is given by the value
of sub10EthMgmtQoSDSCPMappingNumber (maximum 64).
An entry (row) in the sub10EthMgmtQoSDSCPMappingTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10EthMgmtQoSDSCPIndexThe sub10EthMgmtQoSDSCPTable index. | Unsigned32 Constraints: range: 1-64 | .1.3.6.1.4.1.39003.4.2.3.10.1.1 |
| sub10EthMgmtQoSDSCPMarkingThe DSCP value used as an index to the table. This defines the DSCP value which when egressing through the ethernet interface is placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex. | Unsigned32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.39003.4.2.3.10.1.2 |
| sub10EthMgmtQoSDSCPQueueThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific DSCP marking sub10EthMgmtQoSDSCP are inserted. | Sub10QoSQueuer/w Type Constraints: range: 0..7 | .1.3.6.1.4.1.39003.4.2.3.10.1.3 |
sub10EthMgmtQoSMPLSTable
table.1.3.6.1.4.1.39003.4.2.3.12
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthMgmtQoSMPLSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthMgmtQoSMPLSTable'
This table configures the Quality of Service Multi-Protocol
Label Switching protocol (MPLS) Traffic Class (TC) to queue mapping.
Multiple MPLS TCs may be mapped to the same queue but the same
MPLS TC cannot be mapped to more than one queue. This table has
a maximum size of 64 with 1 entry per MPLS TC value.
On egress of the ethernet interface all pkts tagged with the
specific MPLS TC in the IP header will be inserted
onto the specified queue.
See sub10EthMgmtQoSQTable for more information on QoS
queueing.
The number of entries in the table is given by the value
of sub10EthMgmtQoSMPLSMappingNumber (maximum 8).
An entry (row) in the sub10EthMgmtQoSMPLSMappingTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10EthMgmtQoSMPLSIndexThe sub10EthMgmtQoSMPLSMappingTable index. | Unsigned32 Constraints: range: 1-8 | .1.3.6.1.4.1.39003.4.2.3.12.1.1 |
| sub10EthMgmtQoSMPLSTrafficClassThe MPLS Traffic Class value used as an index to the table. This defines the MPLS TC value which when egressing through the ethernet interface is placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex. | Unsigned32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.39003.4.2.3.12.1.2 |
| sub10EthMgmtQoSMPLSQueueThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific MPLS Traffic Class sub10EthMgmtQoSMPLSTrafficClass are inserted. | Sub10QoSQueuer/w Type Constraints: range: 0..7 | .1.3.6.1.4.1.39003.4.2.3.12.1.3 |
.1.3.6.1.4.1.39003.4.2.4.1
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthMgmtStatsActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthMgmtStatsActiveTable'
This table maintains an entry for each Ethernet statistic that is enabled and active.
An entry in the sub10EthMgmtStatsActiveTable.
Each entry represents an object instance of ethernet
stats and it's current state.
Each entry represents an object instance of ethernet
stats and it's current state.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| sub10EthMgmtStatsActiveIndexThe number of ethernet stats objects used as an index to this table. | Unsigned32 Constraints: range: 1-30 | .1.3.6.1.4.1.39003.4.2.4.1.1.1 | ||||
| sub10EthMgmtStatsActiveNameThe stats object name. This is the name of the ethernet stats object in the sub10EthernetStatsCurrent group. | OctetString Constraints: range: 0-32range: 0-255 | .1.3.6.1.4.1.39003.4.2.4.1.1.2 | ||||
| sub10EthMgmtStatsActiveStateIf set to 'enabled' the statistic is active. | Sub10Stater/w Type Values:
| .1.3.6.1.4.1.39003.4.2.4.1.1.3 |
.1.3.6.1.4.1.39003.4.3.3.1.2
·
1 row entry
·
38 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthStats15mHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthStats15mHistTable'
This table maintains a history of Ethernet statistics
based on 15 minute intervals. There are a maximum
of 96 intervals which represent 24 hours of data.
This table along with the 1m and 1d tables provide a
history of the performance of the radio interface. This
information may then be post processed and used as a
troubleshooting tool.
An entry in the table represents a 15 minute interval
where each interval is synchronised to the clock on the
hour. There are up to 96 intervals starting at 1. The
number of valid entries in the table is given by the value
of sub10EthStats15mHistIntvls of which the minimum
is 0 and the maximum is 96 therefore providing
up to a maximum of 24 hours of 15 minute interval data.
The first entry indexed by 1 represents the most recent
completed 15 minute interval. At the end of each interval
all entries of 'index' are copied into entry 'index+1'. If the
number of valid intervals is 96 then the least recent interval
entry is summarised into 24 hour stats and then discarded.
An entry in the sub10EthStats15mHistTable.
Each entry represents 15 minute of performance
management data where the first entry with index=1
is the most recent 15 minute interval and the last
entry with index=n (up to 9…
Each entry represents 15 minute of performance
management data where the first entry with index=1
is the most recent 15 minute interval and the last
entry with index=n (up to 9…
| Column | Syntax | OID |
|---|---|---|
| sub10EthStats15mHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least recent 15 minute interval). | Unsigned32 Constraints: range: 1-96range: 0-255 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.1 |
| sub10EthStats15mHistTimeThe local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same sub10EthStats15mHistIntvl table index are relevant. | Sub10DateTimer/w Type Constraints: range: 19 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.2 |
| sub10EthStats15mHistRxOctetsThe number of octets received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.3 |
| sub10EthStats15mHistRxGoodFrmsThe number of good frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c66… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.4 |
| sub10EthStats15mHistRxBcastFrmsThe number of broadcast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produc… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.5 |
| sub10EthStats15mHistRxMcastFrmsThe number of multicast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produc… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.6 |
| sub10EthStats15mHistRxPauseFrmsThe number of Pause frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c6… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.7 |
| sub10EthStats15mHistRxCRCErrsThe number of CRC errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.8 |
| sub10EthStats15mHistRxAlignErrsThe number of Alignment coding errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com.… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.9 |
| sub10EthStats15mHistRxOversizedThe number of Oversized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produc… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.10 |
| sub10EthStats15mHistRxJabberFrmsThe number of Jabber frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.11 |
| sub10EthStats15mHistRxUndersizedThe number of Undersized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produ… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.12 |
| sub10EthStats15mHistRxFragmentsThe number of frame fragments received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.13 |
| sub10EthStats15mHistRxSOFOvrnsThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations since the last power cycle / reset of the unit. For more infor… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.14 |
| sub10EthStats15mHistTxOctetsThe number of octets transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667x… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.15 |
| sub10EthStats15mHistTxGoodFrmsThe number of ethernet frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Prod… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.16 |
| sub10EthStats15mHistTxBcastFrmsThe number of broadcast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Pro… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.17 |
| sub10EthStats15mHistTxMcastFrmsThe number of multicast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Pro… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.18 |
| sub10EthStats15mHistTxPauseFrmsThe number of Pause frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.19 |
| sub10EthStats15mHistTxDeferredThe number of Deferred frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Prod… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.20 |
| sub10EthStats15mHistTxCollsnThe number of Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Pro… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.21 |
| sub10EthStats15mHistTxSnglCollsnThe number of Single Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.c… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.22 |
| sub10EthStats15mHistTxMlplCollsnThe number of Multiple Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.23 |
| sub10EthStats15mHistTxExsvCollsnThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentati… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.24 |
| sub10EthStats15mHistTxLtCollsnThe number of Late Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.25 |
| sub10EthStats15mHistTxCSenseErrsThe number of Carrier Sense Errored frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.26 |
| sub10EthStats15mHistPkts64OctetsThe total number of 64-byte frames received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.27 |
| sub10EthStats15mHistPkts65T127The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical document… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.28 |
| sub10EthStats15mHistPkts128T255The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documen… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.29 |
| sub10EthStats15mHistPkts256T511The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documen… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.30 |
| sub10EthStats15mHistPkts512T1023The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical docume… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.31 |
| sub10EthStats15mHistPkts1024TMaxThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to onli… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.32 |
| sub10EthStats15mHistRxMbpsMinThe minimum Rx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.33 |
| sub10EthStats15mHistRxMbpsMaxThe maximum Rx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.34 |
| sub10EthStats15mHistRxMbpsAvgThe average Rx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.35 |
| sub10EthStats15mHistTxMbpsMinThe minimum Tx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.36 |
| sub10EthStats15mHistTxMbpsMaxThe maximum Tx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.37 |
| sub10EthStats15mHistTxMbpsAvgThe average Tx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.1.2.1.38 |
sub10EthStats1dHistTable
table.1.3.6.1.4.1.39003.4.3.3.2.2
·
1 row entry
·
38 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10EthStats1dHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10EthStats1dHistTable'
This table maintains a history of Radio statistics
based on 1 day intervals. There are a maximum
of 30 intervals which represent 30 days of data.
This table along with the 1m and 15m tables provide a
history of the performance of the radio interface. This
information may then be post processed and used as a
troubleshooting tool.
An entry in the table represents a 1 day interval
where each interval is synchronised to the clock on the
hour. There are up to 30 intervals starting at 1. The
number of valid entries in the table is given by the value
of sub10EthStats1dHistIntvls of which the minimum
is 0 and the maximum is 30 therefore providing
up to a maximum of 30 days of 1 day interval data.
The first entry indexed by 1 represents the most recent
completed 1 day interval. At the end of each interval
all entries of 'index' are copied into entry 'index+1'. If the
number of valid intervals is 30 then the least recent interval
entry is discarded.
An entry in the sub10EthStats1dHistTable.
Each entry represents 1 day of performance
management data where the first entry with index=1
is the most recent 1 day interval and the last
entry with index=n (up to 30) is the…
Each entry represents 1 day of performance
management data where the first entry with index=1
is the most recent 1 day interval and the last
entry with index=n (up to 30) is the…
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10EthStats1dHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least recent 15 minute interval). | Unsigned32 Constraints: range: 1-96 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.1 |
| sub10EthStats1dHistTimeThe local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10EthStats1dHistIntvl table index are relevant. | Sub10DateTimer/w Type Constraints: range: 19 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.2 |
| sub10EthStats1dHistRxOctetsThe number of octets received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.3 |
| sub10EthStats1dHistRxGoodFrmsThe number of good frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c66… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.4 |
| sub10EthStats1dHistRxBcastFrmsThe number of broadcast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produc… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.5 |
| sub10EthStats1dHistRxMcastFrmsThe number of multicast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produc… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.6 |
| sub10EthStats1dHistRxPauseFrmsThe number of Pause frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c6… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.7 |
| sub10EthStats1dHistRxCRCErrsThe number of CRC errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.8 |
| sub10EthStats1dHistRxAlignErrsThe number of Alignment coding errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com.… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.9 |
| sub10EthStats1dHistRxOversizedThe number of Oversized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produc… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.10 |
| sub10EthStats1dHistRxJabberFrmsThe number of Jabber frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.11 |
| sub10EthStats1dHistRxUndersizedThe number of Undersized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Produ… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.12 |
| sub10EthStats1dHistRxFragmentsThe number of frame fragments received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.13 |
| sub10EthStats1dHistRxSOFOvrnsThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations since the last power cycle / reset of the unit. For more infor… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.14 |
| sub10EthStats1dHistTxOctetsThe number of octets transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667x… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.15 |
| sub10EthStats1dHistTxGoodFrmsThe number of ethernet frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Prod… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.16 |
| sub10EthStats1dHistTxBcastFrmsThe number of broadcast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Pro… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.17 |
| sub10EthStats1dHistTxMcastFrmsThe number of multicast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Pro… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.18 |
| sub10EthStats1dHistTxPauseFrmsThe number of Pause frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.19 |
| sub10EthStats1dHistTxDeferredThe number of Deferred frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Prod… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.20 |
| sub10EthStats1dHistTxCollsnThe number of Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Pro… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.21 |
| sub10EthStats1dHistTxSnglCollsnThe number of Single Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.c… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.22 |
| sub10EthStats1dHistTxMlplCollsnThe number of Multiple Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.23 |
| sub10EthStats1dHistTxExsvCollsnThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentati… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.24 |
| sub10EthStats1dHistTxLtCollsnThe number of Late Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.25 |
| sub10EthStats1dHistTxCSenseErrsThe number of Carrier Sense Errored frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.26 |
| sub10EthStats1dHistPkts64OctetsThe total number of 64-byte frames received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.27 |
| sub10EthStats1dHistPkts65T127The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical document… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.28 |
| sub10EthStats1dHistPkts128T255The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documen… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.29 |
| sub10EthStats1dHistPkts256T511The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documen… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.30 |
| sub10EthStats1dHistPkts512T1023The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical docume… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.31 |
| sub10EthStats1dHistPkts1024TMaxThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to onli… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.32 |
| sub10EthStats1dHistRxMbpsMinThe minimum Rx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.33 |
| sub10EthStats1dHistRxMbpsMaxThe maximum Rx throughput in Mbps in this 15 minute interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.34 |
| sub10EthStats1dHistRxMbpsAvgThe average Rx throughput in Mbps in this 1 day interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.35 |
| sub10EthStats1dHistTxMbpsMinThe minimum Tx throughput in Mbps in this 1 day interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.36 |
| sub10EthStats1dHistTxMbpsMaxThe maximum Tx throughput in Mbps in this 1 day interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.37 |
| sub10EthStats1dHistTxMbpsAvgThe average Tx throughput in Mbps in this 1 day interval. | Sub10ThroughputMbps Type Constraints: range: 0..32 | .1.3.6.1.4.1.39003.4.3.3.2.2.1.38 |
.1.3.6.1.4.1.39003.5.2.9.4
·
1 row entry
·
3 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10RadioMgmtStatsActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10RadioMgmtStatsActiveTable'
This table maintains an entry for each Radio statistic that is enabled and active.
An entry in the sub10RadioMgmtStatsActiveTable.
Each entry represents an object instance of Radio
stats and it's current state.
Each entry represents an object instance of Radio
stats and it's current state.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| sub10RadioMgmtStatsActiveIndexThe number of Radio stats objects used as an index to this table. | Unsigned32 Constraints: range: 1-29 | .1.3.6.1.4.1.39003.5.2.9.4.1.1 | ||||
| sub10RadioMgmtStatsActiveNameThe stats object name. This is the name of the ethernet stats object in the sub10RadioStatsCurrent group. | OctetString Constraints: range: 0-22 | .1.3.6.1.4.1.39003.5.2.9.4.1.2 | ||||
| sub10RadioMgmtStatsActiveStateIf set to 'enabled' the statistic is active. | Sub10Stater/w Type Values:
| .1.3.6.1.4.1.39003.5.2.9.4.1.3 |
.1.3.6.1.4.1.39003.5.3.3.1.2
·
1 row entry
·
33 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10RadioStats1mHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10RadioStats1mHistTable'
This table maintains a history of Radio statistics
based on 1 minute intervals. There are a maximum
of 60 intervals which represent 1 hour of data.
This table along with the 15m and 1d tables provide a
history of the performance of the radio interface. This
information may then be post processed and used as a
troubleshooting tool.
An entry in the table represents a 1 minute interval
where each interval is synchronised to the clock on the
hour. There are up to 60 intervals starting at 1. The
number of valid entries in the table is given by the value
of sub10RadioStats1mHistIntvls of which the minimum
is 0 and the maximum is 60 therefore providing
up to a maximum of 60 minutes of 1 minute interval data.
The first entry indexed by 1 represents the most recent
completed 1 minute interval. At the end of each interval
all entries of 'index' are copied into entry 'index+1'. If the
number of valid intervals is at least 15 then these 15 intervals
are summarised into 15 minutes stats. At the end of a 60 minute
period the least recent interval is discarded to accomodate
the next minute interval.
An entry in the sub10RadioStats1mHistTable.
Each entry represents 1 minute of performance
management data where the first entry with index=1
is the most recent 1 minute interval and the last
entry with index=n (up to 60…
Each entry represents 1 minute of performance
management data where the first entry with index=1
is the most recent 1 minute interval and the last
entry with index=n (up to 60…
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10RadioStats1mHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 minute interval) and have a maximum value of 60 (the least recent 1 minute interval). | Unsigned32 Constraints: range: 1-60 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.1 |
| sub10RadioStats1mHistTimeThe local system time when this 1m history entry was created. This represents the end of the 1 minute interval for which the associated stats with the same sub10RadioStats1mHistIntvl table index are relevant. | Sub10DateTimer/w Type Constraints: range: 19 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.2 |
| sub10RadioStats1mHistTxPowerMinThe minimum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.3 |
| sub10RadioStats1mHistTxPowerMaxThe maximum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.4 |
| sub10RadioStats1mHistTxPowerAvgThe average value that the transmit power of the local radio link has reached in this minute interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.5 |
| sub10RadioStats1mHistRxPowerMinThe minimum value that the receive power of the local radio link has reached in this minute interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.6 |
| sub10RadioStats1mHistRxPowerMaxThe maximum value that the receive power of the local radio link has reached in this minute interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.7 |
| sub10RadioStats1mHistRxPowerAvgThe average value that the receive power of the local radio link has reached in this minute interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.8 |
| sub10RadioStats1mHistVectErrMinThe minimum value that the vector error of the local radio link has reached in this minute interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.9 |
| sub10RadioStats1mHistVectErrMaxThe maximum value that the vector error of the local radio link has reached in this minute interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.10 |
| sub10RadioStats1mHistVectErrAvgThe average value that the vector error of the local radio link has reached in this minute interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.11 |
| sub10RadioStats1mHistLnkLossMinThe minimum value that the link loss of the local radio link has reached in this minute interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.12 |
| sub10RadioStats1mHistLnkLossMaxThe maximum value that the link loss of the local radio link has reached in this minute interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.13 |
| sub10RadioStats1mHistLnkLossAvgThe average value that the link loss of the local radio link has reached in this minute interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.14 |
| sub10RadioStats1mHistMWUTempMinThe minimum MWU temperature measured in this minute interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.15 |
| sub10RadioStats1mHistMWUTempMaxThe maximum MWU temperature measured in this minute interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.16 |
| sub10RadioStats1mHistMWUTempAvgThe average MWU temperature measured in this minute interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.17 |
| sub10RadioStats1mHistRxFrmsThe number of Airside frames received over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.22 |
| sub10RadioStats1mHistTxFrmsThe number of Airside frames transmitted over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.23 |
| sub10RadioStats1mHistRxPktsThe number of Ethernet packets received over the Radio interface in this minute. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.24 |
| sub10RadioStats1mHistTxPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this minute. This does not include packets originating from the management sub-system. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.25 |
| sub10RadioStats1mHistRxMgmtPktsThe number of Ethernet packets received over the Radio interface in this minute and which are destined for the management sub-system on this unit. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.26 |
| sub10RadioStats1mHistTxMgmtPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this minute. This does not include packets originating from the Ethernet interface. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.27 |
| sub10RadioStats1mHistRxBadFrmsThe count of bad frames detected on the receive side of the Radio interface in this minute. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.28 |
| sub10RadioStats1mHistQPSKTo8PSKThe number transitions of Modulation Mode configuration from QPSK to 8PSK in the last 1 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.29 |
| sub10RadioStats1mHist8PSKToQPSKThe number transitions of Modulation Mode configuration from 8PSK to QPSK in the last 1 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.30 |
| sub10RadioStats1mHistAFERMinThe minimum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.31 |
| sub10RadioStats1mHistAFERMaxThe maximum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.32 |
| sub10RadioStats1mHistAFERAvgThe average AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.33 |
| sub10RadioStats1mHistRxQPSKThe time in seconds that the Rx Modulation Mode was QPSK in the last 1 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.34 |
| sub10RadioStats1mHistRx8PSKThe time in seconds that the Rx Modulation Mode was 8PSK in the last 1 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.35 |
| sub10RadioStats1mHistTxQPSKThe time in seconds that the Tx Modulation Mode was QPSK in the last 1 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.36 |
| sub10RadioStats1mHistTx8PSKThe time in seconds that the Tx Modulation Mode was 8PSK in the last 1 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.1.2.1.37 |
.1.3.6.1.4.1.39003.5.3.3.2.2
·
1 row entry
·
33 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10RadioStats15mHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10RadioStats15mHistTable'
This table maintains a history of Radio statistics
based on 15 minute intervals. There are a maximum
of 96 intervals which represent 24 hours of data.
This table along with the 1m and 1d tables provide a
history of the performance of the radio interface. This
information may then be post processed and used as a
troubleshooting tool.
An entry in the table represents a 15 minute interval
where each interval is synchronised to the clock on the
hour. There are up to 96 intervals starting at 1. The
number of valid entries in the table is given by the value
of sub10RadioStats15mHistIntvls of which the minimum
is 0 and the maximum is 96 therefore providing
up to a maximum of 24 hours of 15 minute interval data.
The first entry indexed by 1 represents the most recent
completed 15 minute interval. At the end of each interval
all entries of 'index' are copied into entry 'index+1'. If the
number of valid intervals is 96 then the least recent interval
entry is summarised into 24 hour stats and then discarded.
An entry in the sub10RadioStats15mHistTable.
Each entry represents 15 minutes performance
management data where the first entry with index=1
is the most recent 15 minute interval and the last
entry with index=n (up to 9…
Each entry represents 15 minutes performance
management data where the first entry with index=1
is the most recent 15 minute interval and the last
entry with index=n (up to 9…
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10RadioStats15mHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least recent 15 minute interval). | Unsigned32 Constraints: range: 1-96 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.1 |
| sub10RadioStats15mHistTimeThe local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same sub10RadioStats15mHistIntvl table index are relevant. | Sub10DateTimer/w Type Constraints: range: 19 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.2 |
| sub10RadioStats15mHistTxPowerMinThe minimum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.3 |
| sub10RadioStats15mHistTxPowerMaxThe maximum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.4 |
| sub10RadioStats15mHistTxPowerAvgThe average value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.5 |
| sub10RadioStats15mHistRxPowerMinThe minimum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.6 |
| sub10RadioStats15mHistRxPowerMaxThe maximum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.7 |
| sub10RadioStats15mHistRxPowerAvgThe average value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.8 |
| sub10RadioStats15mHistVectErrMinThe minimum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.9 |
| sub10RadioStats15mHistVectErrMaxThe maximum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.10 |
| sub10RadioStats15mHistVectErrAvgThe average value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.11 |
| sub10RadioStats15mHistLnkLossMinThe minimum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.12 |
| sub10RadioStats15mHistLnkLossMaxThe maximum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.13 |
| sub10RadioStats15mHistLnkLossAvgThe average value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.14 |
| sub10RadioStats15mHistMWUTempMinThe minimum MWU temperature measured in this 15 minute interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.15 |
| sub10RadioStats15mHistMWUTempMaxThe maximum MWU temperature measured in this 15 minute interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.16 |
| sub10RadioStats15mHistMWUTempAvgThe average MWU temperature measured in this 15 minute interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.17 |
| sub10RadioStats15mHistRxFrmsThe number of Airside frames received over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.22 |
| sub10RadioStats15mHistTxFrmsThe number of Airside frames transmitted over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.23 |
| sub10RadioStats15mHistRxPktsThe number of Ethernet packets received over the Radio interface in this 15 minutes. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.24 |
| sub10RadioStats15mHistTxPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this 15 minutes. This does not include packets originating from the management sub-system. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.25 |
| sub10RadioStats15mHistRxMgmtPktsThe number of Ethernet packets received over the Radio interface in this 15 minutes and which are destined for the management sub-system on this unit. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.26 |
| sub10RadioStats15mHistTxMgmtPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this 15 minutes. This does not include packets originating from the Ethernet interface. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.27 |
| sub10RadioStats15mHistRxBadFrmsThe count of bad frames detected on the receive side of the Radio interface in this 15 minutes. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.28 |
| sub10RadioStats15mHistQPSKTo8PSKThe number transitions of Modulation Mode configuration from QPSK to 8PSK in the last 15 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.29 |
| sub10RadioStats15mHist8PSKToQPSKThe number transitions of Modulation Mode configuration from 8PSK to QPSK in the last 15 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.30 |
| sub10RadioStats15mHistAFERMinThe minimum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.31 |
| sub10RadioStats15mHistAFERMaxThe maximum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.32 |
| sub10RadioStats15mHistAFERAvgThe average AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.33 |
| sub10RadioStats15mHistRxQPSKThe time in seconds that the Rx Modulation Mode was QPSK in the last 15 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.34 |
| sub10RadioStats15mHistRx8PSKThe time in seconds that the Rx Modulation Mode was 8PSK in the last 15 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.35 |
| sub10RadioStats15mHistTxQPSKThe time in seconds that the Tx Modulation Mode was QPSK in the last 15 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.36 |
| sub10RadioStats15mHistTx8PSKThe time in seconds that the Tx Modulation Mode was 8PSK in the last 15 minute interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.2.2.1.37 |
.1.3.6.1.4.1.39003.5.3.3.3.2
·
1 row entry
·
33 columns
Uses the fastback variant from
Command help
/opt/observium/mibs/fastback.
Walk sub10RadioStats1dHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUB10SYSTEMS-MIB' -M '/opt/observium/mibs/fastback:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUB10SYSTEMS-MIB::sub10RadioStats1dHistTable'
This table maintains a history of Radio statistics
based on 1 day intervals. There are a maximum
of 30 intervals which represent 30 days of data.
This table along with the 1m and 15m tables provide a
history of the performance of the radio interface. This
information may then be post processed and used as a
troubleshooting tool.
An entry in the table represents a 1 day interval
where each interval is synchronised to the clock on the
hour. There are up to 30 intervals starting at 1. The
number of valid entries in the table is given by the value
of sub10RadioStats1dHistIntvls of which the minimum
is 0 and the maximum is 30 therefore providing
up to a maximum of 30 days of 1 day interval data.
The first entry indexed by 1 represents the most recent
completed 1 day interval. At the end of each interval
all entries of 'index' are copied into entry 'index+1'. If the
number of valid intervals is 30 then the least recent interval
entry is discarded.
An entry in the sub10RadioStats1dHistTable.
Each entry represents 1 day of performance
management data where the first entry with index=1
is the most recent 1 day interval and the last
entry with index=n (up to 30) is t…
Each entry represents 1 day of performance
management data where the first entry with index=1
is the most recent 1 day interval and the last
entry with index=n (up to 30) is t…
Indexes
| Column | Syntax | OID |
|---|---|---|
| sub10RadioStats1dHistIntvlThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 day interval) and have a maximum value of 24 (the least recent 1 day interval). | Unsigned32 Constraints: range: 1-30 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.1 |
| sub10RadioStats1dHistTimeThe local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10RadioStats1dHistIntvl table index are relevant. | Sub10DateTimer/w Type Constraints: range: 19 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.2 |
| sub10RadioStats1dHistTxPowerMinThe minimum value that the transmit power of the local radio link has reached in this day interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.3 |
| sub10RadioStats1dHistTxPowerMaxThe maximum value that the transmit power of the local radio link has reached in this day interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.4 |
| sub10RadioStats1dHistTxPowerAvgThe average value that the transmit power of the local radio link has reached in this day interval, measured in dBm. | dBmInteger32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.5 |
| sub10RadioStats1dHistRxPowerMinThe minimum value that the receive power of the local radio link has reached in this day interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.6 |
| sub10RadioStats1dHistRxPowerMaxThe maximum value that the receive power of the local radio link has reached in this day interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.7 |
| sub10RadioStats1dHistRxPowerAvgThe average value that the receive power of the local radio link has reached in this day interval, measured in dBm. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.8 |
| sub10RadioStats1dHistVectErrMinThe minimum value that the vector error of the local radio link has reached in this day interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.9 |
| sub10RadioStats1dHistVectErrMaxThe maximum value that the vector error of the local radio link has reached in this day interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.10 |
| sub10RadioStats1dHistVectErrAvgThe average value that the vector error of the local radio link has reached in this day interval, measured in dB. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.11 |
| sub10RadioStats1dHistLnkLossMinThe minimum value that the link loss of the local radio link has reached in this day interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.12 |
| sub10RadioStats1dHistLnkLossMaxThe maximum value that the link loss of the local radio link has reached in this day interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.13 |
| sub10RadioStats1dHistLnkLossAvgThe average value that the link loss of the local radio link has reached in this day interval, measured in dB. | dBmOctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.14 |
| sub10RadioStats1dHistMWUTempMinThe minimum MWU temperature measured in this day interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.15 |
| sub10RadioStats1dHistMWUTempMaxThe maximum MWU temperature measured in this day interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.16 |
| sub10RadioStats1dHistMWUTempAvgThe average MWU temperature measured in this day interval. | Integer32 Constraints: range: -100-100 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.17 |
| sub10RadioStats1dHistRxFrmsThe number of Airside frames received over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.22 |
| sub10RadioStats1dHistTxFrmsThe number of Airside frames transmitted over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.23 |
| sub10RadioStats1dHistRxPktsThe number of Ethernet packets received over the Radio interface in this day interval. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.24 |
| sub10RadioStats1dHistTxPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this day interval. This does not include packets originating from the management sub-system. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.25 |
| sub10RadioStats1dHistRxMgmtPktsThe number of Ethernet packets received over the Radio interface in this day interval and which are destined for the management sub-system on this unit. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.26 |
| sub10RadioStats1dHistTxMgmtPktsThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this day interval. This does not include packets originating from the Ethernet interface. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.27 |
| sub10RadioStats1dHistRxBadFrmsThe count of bad frames detected on the receive side of the Radio interface in this day interval. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.28 |
| sub10RadioStats1dHistQPSKTo8PSKThe number transitions of Modulation Mode configuration from QPSK to 8PSK in the last 1 day interval. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.29 |
| sub10RadioStats1dHist8PSKToQPSKThe number transitions of Modulation Mode configuration from 8PSK to QPSK in the last 1 day interval. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.30 |
| sub10RadioStats1dHistAFERMinThe minimum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.31 |
| sub10RadioStats1dHistAFERMaxThe maximum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.32 |
| sub10RadioStats1dHistAFERAvgThe average AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.33 |
| sub10RadioStats1dHistRxQPSKThe time in seconds that the Rx Modulation Mode was QPSK in the last 1 day interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.34 |
| sub10RadioStats1dHistRx8PSKThe time in seconds that the Rx Modulation Mode was 8PSK in the last 1 day interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.35 |
| sub10RadioStats1dHistTxQPSKThe time in seconds that the Tx Modulation Mode was QPSK in the last 1 day interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.36 |
| sub10RadioStats1dHistTx8PSKThe time in seconds that the Tx Modulation Mode was 8PSK in the last 1 day interval. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.39003.5.3.3.3.2.1.37 |