SLE-DEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
238

sleEthernetPortTable

table
.1.3.6.1.4.1.6296.101.2.2.1 · 1 row entry · 36 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleEthernetPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleEthernetPortTable' 
Description.
sleEthernetPortEntry row .1.3.6.1.4.1.6296.101.2.2.1.1
Description.
Indexes
Column Syntax OID
sleEthernetPortIndex
The port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.2.1.1.1
sleEthernetPortPhyIndex
The physical index of entity mib.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.1.1.2
sleEthernetPortType
The type of port.
It is not planed to made a automatic switchover between optical and electrical interfaces.
Enumeration
Enumerated Values:
0unknown
1electrical
2optical
 .1.3.6.1.4.1.6296.101.2.2.1.1.3
sleEthernetPortAdminStatus
The admin status of port.
Enumeration
Enumerated Values:
1up
2down
3notAvailable
 .1.3.6.1.4.1.6296.101.2.2.1.1.4
sleEthernetPortOperStatus
The oper status of port
Enumeration
Enumerated Values:
1up
2down
3notAvailable
 .1.3.6.1.4.1.6296.101.2.2.1.1.5
sleEthernetPortTransmissionRate
The speed of port. Unit is Mbit/s.
This configurations are only useful for electrical interfaces.
Optical - interfaces will always support 1000 MBIT/s
Integer32
Constraints:
range: 1000-1000
range: 10000-10000
range: 2500-2500
range: 100-100
range: 10-10
 .1.3.6.1.4.1.6296.101.2.2.1.1.6
sleEthernetPortDuplexMode
The duplex status of port.
Enumeration
Enumerated Values:
1full
2half
3notAvailable
 .1.3.6.1.4.1.6296.101.2.2.1.1.7
sleEthernetPortFlowControl
The flow-control mode of port.
Enumeration
Enumerated Values:
1disabled
2enabledSymetrical
3enabledAsymetrical
4enabledBoth
5notAvailable
 .1.3.6.1.4.1.6296.101.2.2.1.1.8
sleEthernetPortNegotiationMode
The Auto Negotiation mode of port.
Enumeration
Enumerated Values:
1auto
2force
3notAvailable
 .1.3.6.1.4.1.6296.101.2.2.1.1.9
sleEthernetPortJumboFrameSize
The jumbo frame's size of port.
If the value is zero, it means that it is not set up.
Integer32
Constraints:
range: 1518-12288
range: 0-0
 .1.3.6.1.4.1.6296.101.2.2.1.1.10
sleEthernetPortSfpTransceiver
Description.
Enumeration
Enumerated Values:
0unknown
1electrical
2electricalCoaxial
3opticalLongHaul
4opticalShortHaul
5optical10G
6opticalGpon
 .1.3.6.1.4.1.6296.101.2.2.1.1.11
sleEthernetPortSfpVendorName
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.1.1.12
sleEthernetPortSfpVendorPartNumber
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.1.1.13
sleEthernetPortSfpVendorRevision
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.1.1.14
sleEthernetPortSfpVendorSerialNumber
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.1.1.15
sleEthernetPortSfpDateCode
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.1.1.16
sleEthernetPortPhysicalRemoteChassis
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.1.1.17
sleEthernetPortPhysicalRemoteSlot
Description.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.1.1.18
sleEthernetPortPhysicalRemotePort
Description.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.1.1.19
sleEthernetPortPhysicalLinkDiscoveryMode
Description.
Enumeration
Enumerated Values:
1none
2manual
3automatic
 .1.3.6.1.4.1.6296.101.2.2.1.1.20
sleEthernetPortSfpTransceiverType
The type of SFP transceiver.
Enumeration
Enumerated Values:
1sfp
2gbit
3xfp
255unknown
 .1.3.6.1.4.1.6296.101.2.2.1.1.21
sleEthernetPortSfpTransceiverDetailType
The detailed-type of SFP transceiver.
Enumerationr/w
Enumerated Values:
1fiber1000Sx
2fiber1000Lx
3fiber1000Cx
4fiber1000T
5fiber100lLxLx10
6fiber100Fx
7fiberBx10
8fiberPx
9fiberOc3MmSr
10fiberOc3SmIr
11fiberOc3SmLr
12fiber1000Zx
255unknown
 .1.3.6.1.4.1.6296.101.2.2.1.1.22
sleEthernetPortSlotIndex
The slot index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.1.1.23
sleEthernetPortSlotPortIndex
The slot's port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.1.1.24
sleEthernetPortAdminTransmissionRate
The speed of port. Unit is Mbit/s.
This configurations are only useful for electrical interfaces.
Optical - interfaces will always support 1000 MBIT/s
Integer32
Constraints:
range: 10000-10000
range: 1000-1000
range: 100-100
range: 10-10
 .1.3.6.1.4.1.6296.101.2.2.1.1.25
sleEthernetPortAdminDuplexMode
The duplex status of port.
Enumeration
Enumerated Values:
1full
2half
255notAvailable
 .1.3.6.1.4.1.6296.101.2.2.1.1.26
sleEthernetPortAdminFlowControl
The flow-control mode of port.
Enumeration
Enumerated Values:
1disabled
2enableSend
3enableReceive
4enabledBoth
 .1.3.6.1.4.1.6296.101.2.2.1.1.27
sleEthernetPortAdminNegotiationMode
The Auto Negotiation mode of port.
Enumeration
Enumerated Values:
1auto
2force
255notAvailable
 .1.3.6.1.4.1.6296.101.2.2.1.1.28
sleEthernetPortAdminReason
The admin down reason of the interface.
user : by user-configuration
xllcf : by xllcf protocol
all : both user and xllcf
Enumeration
Enumerated Values:
0none
1user
2xllcf
3all
 .1.3.6.1.4.1.6296.101.2.2.1.1.29
sleEthernetPortLinkCheckTimer
The Link check internval of the interface
Integer32
Constraints:
range: 20-1000
 .1.3.6.1.4.1.6296.101.2.2.1.1.30
sleEthernetPortLinkDebounceTime
The link debounce time of the interface
Integer32
Constraints:
range: 10-5000
range: 0-0
 .1.3.6.1.4.1.6296.101.2.2.1.1.31
sleEthernetPortCpuStatisticsLimitUnicast
The CPU statistics-limit Unicast Count
( the standard unit : 1000, 10 = 1000 )
Integer32
Constraints:
range: 10-100
range: 0-0
 .1.3.6.1.4.1.6296.101.2.2.1.1.32
sleEthernetPortCpuStatisticsLimitMulticast
et CPU statistics-limit Multicast Count
( the standard unit : 1000, 10 = 1000 )
Integer32
Constraints:
range: 10-100
range: 0-0
 .1.3.6.1.4.1.6296.101.2.2.1.1.33
sleEthernetPortCpuStatisticsLimitBroadcast
Set CPU statistics-limit Broadcast Count
( the standard unit : 1000, 10 = 1000 )
Integer32
Constraints:
range: 10-100
range: 0-0
 .1.3.6.1.4.1.6296.101.2.2.1.1.34
sleEthernetPortFloodBlockBroadcastState
The Flood Block Broadcast State of the interface
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.6296.101.2.2.1.1.35
sleEthernetPortFloodBlockDlfState
The Flood Block DLF State of the interface
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.6296.101.2.2.1.1.36

sleEthernetPortDMITable

table
.1.3.6.1.4.1.6296.101.2.2.4 · 1 row entry · 6 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleEthernetPortDMITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleEthernetPortDMITable' 
Description.
sleEthernetPortDMIEntry row .1.3.6.1.4.1.6296.101.2.2.4.1
Description.
Indexes
Column Syntax OID
sleEthernetPortDMIIndex
Port Index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.2.4.1.1
sleEthernetPortDMITemper
Internally measured module temperature.
OctetString .1.3.6.1.4.1.6296.101.2.2.4.1.2
sleEthernetPortDMIVoltage
Internally measured supply voltage in transceiver.
OctetString .1.3.6.1.4.1.6296.101.2.2.4.1.3
sleEthernetPortDMITxBias
Internally measured TX Bias Current.
OctetString .1.3.6.1.4.1.6296.101.2.2.4.1.4
sleEthernetPortDMITxPower
Measured TX output power.
OctetString .1.3.6.1.4.1.6296.101.2.2.4.1.5
sleEthernetPortDMIRxPower
Measured RX input power.
OctetString .1.3.6.1.4.1.6296.101.2.2.4.1.6

sleEthernetSFPTable

table
.1.3.6.1.4.1.6296.101.2.2.5 · 1 row entry · 22 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleEthernetSFPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleEthernetSFPTable' 
Description.
sleEthernetSFPEntry row .1.3.6.1.4.1.6296.101.2.2.5.1
Description.
Indexes
Column Syntax OID
sleEthernetSfpIndex
The SFP index.
Integer32
Constraints:
range: 1-65556
 .1.3.6.1.4.1.6296.101.2.2.5.1.1
sleEthernetSfpTransceiver
The type of SFP
Enumeration
Enumerated Values:
0unknown
1electrical
2electricalCoaxial
3opticalLongHaul
4opticalShortHaul
5optical10G
6opticalGpon
 .1.3.6.1.4.1.6296.101.2.2.5.1.2
sleEthernetSfpVendorName
The vendor name of SFP
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.3
sleEthernetSfpVendorPartNumber
The part number of SFP
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.4
sleEthernetSfpVendorRevision
The revision of SFP
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.5
sleEthernetSfpVendorSerialNumber
The serial number of SFP
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.6
sleEthernetSfpDateCode
The manufacturing date of SFP
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.7
sleEthernetSfpTransceiverType
The type of SFP transceiver.
Enumeration
Enumerated Values:
1sfp
2gbic
3xfp
255unknown
 .1.3.6.1.4.1.6296.101.2.2.5.1.8
sleEthernetSfpTransceiverDetailType
The detailed-type of SFP transceiver.
Enumerationr/w
Enumerated Values:
1fiber1000Sx
2fiber1000Lx
3fiber1000Cx
4fiber1000T
5fiber100lLxLx10
6fiber100Fx
7fiberBx10
8fiberPx
9fiberOc3MmSr
10fiberOc3SmIr
11fiberOc3SmLr
12fiber1000Zx
64base10GSR
65base10GLR
66base10GER
67base10GLRM
68base10GSW
69base10GLW
70base10GEW
71base10GEWorZW
255unknown
 .1.3.6.1.4.1.6296.101.2.2.5.1.9
sleEthernetSfpTransceiverCodes
The transceiver codes.
In case of SFP, reference SFP-8472 Rev 11.0
- Table 3.5: Transceiver codes (Address A0h)
- Table 3.5a: SONET Compliance Specifiers (A0h)
In case of XFP, reference XFP Specification Revision 4.…
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.6296.101.2.2.5.1.10
sleEthernetSfpSpeed
The speed of SFP
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.11
sleEthernetSfpLength
The length of SFP
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.5.1.12
sleEthernetSfpWaveLength
The wavelength of SFP
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.5.1.13
sleEthernetSfpMultimodeLengthOm1
The Flame rating is 62.5um(OM1). This is used only for 10G SFP module with multi-mode.
ref) 50/125 Multimode Fiber Optic
50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.5.1.14
sleEthernetSfpMultimodeLengthOm2
The Flame rating is 50um(OM2). This is used only for 10G SFP module with multi-mode.
ref) 50/125 Multimode Fiber Optic
50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/12…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.5.1.15
sleEthernetSfpMultimodeLengthOm3
The Flame rating is 50um(OM3). This is used only for 10G SFP module with multi-mode.
ref) 50/125 Multimode Fiber Optic
50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/12…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.2.5.1.16
sleEthernetSfpTransceiverDetailTypeStr
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.17
sleEthernetSfpTransceiverLengthStr
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.18
sleEthernetSfpWaveLengthStr
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.19
sleEthernetSfpConnectorType
Description.
OctetString .1.3.6.1.4.1.6296.101.2.2.5.1.20
sleEthernetSfpDdmState
The DDM state
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.6296.101.2.2.5.1.21
sleEthernetSfpNegoState
The Nego state
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.2.5.1.22

sleEthernetSFPThresholdTable

table
.1.3.6.1.4.1.6296.101.2.2.8 · 1 row entry · 6 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleEthernetSFPThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleEthernetSFPThresholdTable' 
Description.
sleEthernetSFPThresholdEntry row .1.3.6.1.4.1.6296.101.2.2.8.1
Description.
Indexes
Column Syntax OID
sleEthernetSFPThresholdIfIndex
The index of the interface
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.2.8.1.1
sleEthernetSFPThresholdType
The Type of Threshold
Enumeration
Enumerated Values:
1temperWarning
2temperAlarm
3voltageWarning
4voltageAlarm
5txbiasWarning
6txbiasAlarm
7txpowerWarning
8txpowerAlarm
9rxpowerWarning
10rxpowerAlarm
 .1.3.6.1.4.1.6296.101.2.2.8.1.2
sleEthernetSFPThresholdSfpLow
The Threshold Low Value of Sfp
OctetString .1.3.6.1.4.1.6296.101.2.2.8.1.3
sleEthernetSFPThresholdSfpHigh
The Threshold High Value of Sfp
OctetString .1.3.6.1.4.1.6296.101.2.2.8.1.4
sleEthernetSFPThresholdSystemLow
The Threshold Low Value of System
OctetString .1.3.6.1.4.1.6296.101.2.2.8.1.5
sleEthernetSFPThresholdSystemHigh
The Threshold High Value of System
OctetString .1.3.6.1.4.1.6296.101.2.2.8.1.6

slePowerTable

table
.1.3.6.1.4.1.6296.101.2.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk slePowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::slePowerTable' 
Description.
slePowerEntry row .1.3.6.1.4.1.6296.101.2.3.1.1
Description.
Indexes
Column Syntax OID
slePowerIndex
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initializatio…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.3.1.1.1
slePowerPhyIndex
entPhysicalIndex of Power Modules (0: Internal, -1: uninstalled)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.3.1.1.2
slePowerState
Power status information.
Enumeration
Enumerated Values:
0failure
1ok
 .1.3.6.1.4.1.6296.101.2.3.1.1.3
slePowerType
Power type information.
Enumeration
Enumerated Values:
1ac
2dc
3unknown
4psu
 .1.3.6.1.4.1.6296.101.2.3.1.1.4
slePowerPSUType
The type of Power Supply Unit.(DC)
Enumeration
Enumerated Values:
1psuA
2psuS
255unknown
 .1.3.6.1.4.1.6296.101.2.3.1.1.5

sleFanModuleTable

table
.1.3.6.1.4.1.6296.101.2.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleFanModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleFanModuleTable' 
Description.
sleFanModuleEntry row .1.3.6.1.4.1.6296.101.2.4.1.1
Description.
Indexes
Column Syntax OID
sleFanModuleIndex
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.4.1.1.1
sleFanModulePhyIndex
entPhysicalIndex of FAN Modules. (0: Internal, -1: uninstalled)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.4.1.1.2
sleFanModuleUnitNum
The number of unit in FAN module
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.4.1.1.3
sleFanModuleAdminState
An administrative state of FAN module
Enumeration
Enumerated Values:
0off
1on
2auto
 .1.3.6.1.4.1.6296.101.2.4.1.1.4
sleFanModuleSpeedThreshold
Fan-speed threshold
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.4.1.1.5

sleFanUnitTable

table
.1.3.6.1.4.1.6296.101.2.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleFanUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleFanUnitTable' 
Description.
sleFanUnitEntry row .1.3.6.1.4.1.6296.101.2.5.1.1
Description.
Indexes
Column Syntax OID
sleFanUnitIndex
A unique number in FAN module
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.5.1.1.1
sleFanUnitOperState
An operational state of FAN unit
Enumeration
Enumerated Values:
0failure
1ok
2stop
 .1.3.6.1.4.1.6296.101.2.5.1.1.2
sleFanUnitSpeed
Speed of FAN unit
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.5.1.1.3

sleTemperatureTable

table
.1.3.6.1.4.1.6296.101.2.6.1 · 1 row entry · 11 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleTemperatureTable' 
Description.
sleTemperatureEntry row .1.3.6.1.4.1.6296.101.2.6.1.1
Description.
Indexes
Column Syntax OID
sleTemperatureIndex
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.6.1.1.1
sleTemperatureState
Temperature status information
Enumeration
Enumerated Values:
0failure
1ok
2others
 .1.3.6.1.4.1.6296.101.2.6.1.1.2
sleTemperatureValue
The value of temperature sensor. (unit: C)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.6.1.1.3
sleTemperatureHighThreshold
The High threshold of temperature.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.6.1.1.4
sleTemperatureLowThreshold
The Low threshold of temperature.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.6.1.1.5
sleTemperatureWarnHighThreshold
The High threshold of temperature.
Integer32
Constraints:
range: -40-100
 .1.3.6.1.4.1.6296.101.2.6.1.1.6
sleTemperatureWarnLowThreshold
The Low threshold of temperature.
Integer32
Constraints:
range: -40-100
 .1.3.6.1.4.1.6296.101.2.6.1.1.7
sleTemperatureWarnDuration
Duration-time units by the 5 sec.
0: Clear threshold.
Integer32
Constraints:
range: 0-300
 .1.3.6.1.4.1.6296.101.2.6.1.1.8
sleTemperatureAlarmHighThreshold
The High threshold of temperature.
Integer32
Constraints:
range: -40-100
 .1.3.6.1.4.1.6296.101.2.6.1.1.9
sleTemperatureAlarmLowThreshold
The Low threshold of temperature.
Integer32
Constraints:
range: -40-100
 .1.3.6.1.4.1.6296.101.2.6.1.1.10
sleTemperatureAlarmDuration
Duration-time units by the 5 sec.
0: Clear threshold.
Integer32
Constraints:
range: 0-300
 .1.3.6.1.4.1.6296.101.2.6.1.1.11

sleBatteryTable

table
.1.3.6.1.4.1.6296.101.2.7.1 · 1 row entry · 25 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleBatteryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleBatteryTable' 
Description.
sleBatteryEntry row .1.3.6.1.4.1.6296.101.2.7.1.1
Description.
Indexes
Column Syntax OID
sleBatteryIndex
The index of battery charger.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.6296.101.2.7.1.1.1
sleOperationPowerType
Power Type.
Enumeration
Enumerated Values:
0ac
1rbu
 .1.3.6.1.4.1.6296.101.2.7.1.1.2
sleOperationPowerInfo
Operation Power Info.
OctetString .1.3.6.1.4.1.6296.101.2.7.1.1.3
slePSUACPowerState
Power State.
Enumeration
Enumerated Values:
0ok
1fault
 .1.3.6.1.4.1.6296.101.2.7.1.1.4
slePSUTemperture
Temperture.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.5
slePSUTempThreshold
Temperture Threshold.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.6
slePSUOutVoltage
Voltage.
OctetString .1.3.6.1.4.1.6296.101.2.7.1.1.7
slePSUOverTemp
Description.
Enumeration
Enumerated Values:
0normal
1over
 .1.3.6.1.4.1.6296.101.2.7.1.1.8
slePSUFirmwareVer
The firmware version of battery charger for communication to system.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.9
sleRBUEquipState
Equipment State.
Enumeration
Enumerated Values:
0equipped
1empty
 .1.3.6.1.4.1.6296.101.2.7.1.1.10
sleRBUModeStaus
Description.
OctetString .1.3.6.1.4.1.6296.101.2.7.1.1.11
sleRBUTemperature1
Description.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.12
sleRBUTemperature2
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.13
sleRBUTempLowThreshold
RBU Low Temperature Threshold.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.14
sleRBUOutVoltage
RBU Out Voltage.
OctetString .1.3.6.1.4.1.6296.101.2.7.1.1.15
sleRBUChargeCurrent
Current Charge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.16
sleRBURemainCapacity
Remain Capacity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.17
sleRBUOverTemp
The state of Temperature over.
Enumeration
Enumerated Values:
0normal
1over
2under
 .1.3.6.1.4.1.6296.101.2.7.1.1.18
sleBatteryLow
Battery state.
Enumeration
Enumerated Values:
0normal
1low
2notAvailable
 .1.3.6.1.4.1.6296.101.2.7.1.1.19
sleRBUTempHighThreshold
RBU High Temperature Threshold.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.20
sleRBUBTStatus
Description.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6296.101.2.7.1.1.21
sleRBUBTThreshold
Description.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.22
sleRBURechargeVoltage
Description.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.23
sleBatteryCellStatus
Description.
Enumeration
Enumerated Values:
1ok
2failure
 .1.3.6.1.4.1.6296.101.2.7.1.1.24
sleBPSUACHardwareVer
Description.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.7.1.1.25

sleBatteryBackupTable

table
.1.3.6.1.4.1.6296.101.2.7.4 · 1 row entry · 1 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleBatteryBackupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleBatteryBackupTable' 
Description.
sleBatteryBackupEntry row .1.3.6.1.4.1.6296.101.2.7.4.1
Description.
Indexes
Column Syntax OID
sleBatteryBackupFile
Description.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.6296.101.2.7.4.1.1

sleClockModuleTable

table
.1.3.6.1.4.1.6296.101.2.10.1 · 1 row entry · 5 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleClockModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleClockModuleTable' 
Description.
sleClockModuleEntry row .1.3.6.1.4.1.6296.101.2.10.1.1
Description.
Indexes
Column Syntax OID
sleClockModuleIndex
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.10.1.1.1
sleClockModuleBoardId
Indication of the board identifier.
Enumeration
Enumerated Values:
1sfuA
2sfuB
 .1.3.6.1.4.1.6296.101.2.10.1.1.2
sleClockModuleInstallStatus
The install status of clock module.
Enumeration
Enumerated Values:
0removed
1installed
 .1.3.6.1.4.1.6296.101.2.10.1.1.3
sleClockModuleInitStatus
The initialization status of clock module.
Enumeration
Enumerated Values:
0failure
1ok
 .1.3.6.1.4.1.6296.101.2.10.1.1.4
sleClockModuleOPMode
The CM operating mode
Enumerationr/w
Enumerated Values:
1freerun
2holdover
3locked
4prelocked2
5prelocked
6lostphase
255unknown
 .1.3.6.1.4.1.6296.101.2.10.1.1.5

sleSlotSystemInfoTable

table
.1.3.6.1.4.1.6296.101.2.11.1.1 · 1 row entry · 33 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleSlotSystemInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleSlotSystemInfoTable' 
Description.
sleSlotSystemInfoEntry row .1.3.6.1.4.1.6296.101.2.11.1.1.1
Description.
Indexes
Column Syntax OID
sleSlotSystemIndex
The system slot index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.1
sleSlotSystemUptime
The time since the network management portion of the system was last re-initialized.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.2
sleSlotSystemModelName
The model name.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.3
sleSlotSystemSerialNumber
The serial number
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.4
sleSlotSystemHWVersion
The H/W version.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.5
sleSlotSystemBLVersion
The boot loader??s S/W version.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.6
sleSlotSystemSWCompatibility
The system compatibility.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.7
sleSlotSystemOSVersion
The version information of current os.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.8
sleSlotSystemMacAddress
The system??s MAC address.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.9
sleSlotSystemCPULoadAll
The CPU all load for 5/60/600 second. (unit: 0.01%)
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.10
sleSlotSystemCPULoadInterrupt
The CPU interrupt load for 5/60/600 second. (unit: 0.01%)
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.11
sleSlotSystemMemoryTotal
The total memory size (unit: kb)
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.12
sleSlotSystemMemoryFree
The freed memory size (unit: kb)
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.13
sleSlotSystemMemoryShared
The shared memory size (unit: kb)
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.14
sleSlotSystemMemoryBuffers
The buffer size (unit: kb)
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.15
sleSlotSystemMemoryCached
The cached memory size (unit: kb)
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.16
sleSlotSystemMemorySwapTotal
The total swap memory size (unit: kb)
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.17
sleSlotSystemMemorySwapFree
The freed swap memory size (unit: kb)
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.18
sleSlotSystemBootReason
The system slot boot reason.
Enumeration
Enumerated Values:
1powerBoot
2powerBootByLocal
3hwResetBySW
4hardWdogByLocal
5hwRebootByMate
6hwRebootBySwitchover
10swReboot
11swRebootByLocal
12swRebootBySFU
13swRebootBySwitchover
14swRebootByPanic
20watchdog
21watchdogByLocal
30swWatchdog
31swWatchdogByCpuOver
32swWatchdogByMemoryLow
255error
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.19
sleSlotSystemBootTime
The system slot boot time.
The time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds.
1 secondSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.20
sleSlotSystemVoltage
The system slot voltage.
0.1 vSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.21
sleSlotSystemPowerLevelStatus
PCB Power level status.
Enumeration
Enumerated Values:
1good
2bad
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.22
sleSlotSystemInfoLEDStatus
The LED status of each slot.
Bits
Enumerated Values:
0pwr
1run
2critical
3major
4minor
5error
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.23
sleSlotSystemInfoPackageVersion
The applied package revision.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.24
sleSlotSystemInfoManufacturer
Ths manufacturer name and country.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.25
sleSlotSystemInfoManufactureDate
Ths manufacture date.
OctetString .1.3.6.1.4.1.6296.101.2.11.1.1.1.26
sleSlotSystemCPULoadHighThreshold
The high threshold of CPU load (70:default)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.27
sleSlotSystemCPULoadHighThresholdTimer
The high threshold timer of CPU load (sec) (60:default)
Enumeration
Enumerated Values:
1timerInverval5
2timerInverval60
3timerInverval600
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.28
sleSlotSystemCPULoadLowThreshold
The low threshold of CPU load (30:default)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.29
sleSlotSystemCPULoadLowThresholdTimer
The low threshold timer of CPU load (sec) (60:default)
Enumeration
Enumerated Values:
1timerInverval5
2timerInverval60
3timerInverval600
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.30
sleSlotSystemCPULoadCurrent
The CPU load currnet value (only used for trap)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.31
sleSlotSystemCPUOverallStatus
The CPU Overall status for SFU & IU
Enumeration
Enumerated Values:
1good
2bad
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.32
sleSlotSystemTemperOverallStatus
The Temperature Overall status for SFU & IU
Enumeration
Enumerated Values:
1good
2bad
 .1.3.6.1.4.1.6296.101.2.11.1.1.1.33

sleSlotStatusInfoTable

table
.1.3.6.1.4.1.6296.101.2.11.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleSlotStatusInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleSlotStatusInfoTable' 
Description.
sleSlotStatusInfoEntry row .1.3.6.1.4.1.6296.101.2.11.2.1.1
Description.
Indexes
Column Syntax OID
sleSlotStatusPlan
Planning status of slot.
Enumeration
Enumerated Values:
1notPlanned
2planned
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.1
sleSlotStatusPlanCardType
Planning card type status of slot.
Enumeration
Enumerated Values:
1unknown
2siuGE12
3siuEPON12
4siuGPON4
5niuGE12
6sfu
7v5548gGE12
8siuGPON4r
9niuGE8
10siuGE4
11niu10GPlus
12iu10GE
13iuGE6
14iuGE4
15siuTDM
16siuGE24
17siuFE48
18niu10GE2
19siu10GE48
20siuGE10
21niu10Ge2Plus
22iuGT4
23iuGT6
24iuTDM6
25siuGE6
26siuGE8
27siuGT6
28niuGE2
29niuGE4
30iuGEPON4
31iu10GE8
32iuGEPON8
33iu10GEPON8
34iuGE8
35siu10GEPON8
36niu10GE4
37sfu10GE4
38siuGPON16
39iu10GE4
40siuGT24
41iu10GE2
42cwdm
43iuGT8
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.2
sleSlotStatusCurrentInstall
Currently installation status of slot.
Enumeration
Enumerated Values:
1notInstalled
2installed
3failed
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.3
sleSlotStatusCurrentInstallCardType
Currently installation card type status of slot.
Enumeration
Enumerated Values:
1unknown
2siuGE12
3siuEPON12
4siuGPON4
5niuGE12
6sfu
7v5548gGE12
8siuGPON4r
9niuGE8
10siuGE4
11niu10GPlus
12iuGE10
13iuGE6
14iuGE4
15siuTDM
16siuGE24
17siuFE48
18niu10GE2
19siu10GE48
20siuGE10
21niu10Ge2Plus
22iuGT4
23iuGT6
24iuTDM6
25siuGE6
26siuGE8
27siuGT6
28niuGE2
29niuGE4
30iuGEPON4
31iu10GE8
32iuGEPON8
33iu10GEPON8
34iuGE8
35siu10GEPON8
36niu10GE4
37sfu10GE4
38siuGPON16
39iu10GE4
40siuGT24
41iu10GE2
42cwdm
43iuGT8
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.4
sleSlotStatusCardOperation
Currently operation status of slot.
Enumeration
Enumerated Values:
1disable
2init
3enable
4enableActive
5enableStandby
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.5
sleSlotStatusLock
Lock status of slot.
Enumeration
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.6
sleSlotStatusUpgradeMode
Upgrade mode status of slot.
Enumeration
Enumerated Values:
1manual
2auto
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.7
sleSlotStatusActionEvent
Event of slot. (accessible-for-notify)
Enumeration
Enumerated Values:
1uninstallAction
2installAction
3noPlanningAction
4planningAction
5lockAction
6unlockAction
7matchedEvent
8unMatchedEvent
9bootEndEvent
10configEndEvent
11configFailEvent
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.8
sleSlotStatusState
Status of slot. (accessible-for-notify)
Enumeration
Enumerated Values:
1default
2planningWait
3installWait
4operationReady
5actionBootReady
6actionConfig
7actionEnableReady
8actionEnable
9actionEnableLock
10actionDisable
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.9
sleSlotStatusPower
Currently power status of slot.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.10
sleSlotStatusSerialNumber
The serial number
OctetString .1.3.6.1.4.1.6296.101.2.11.2.1.1.11
sleSlotStatusHealthState
The slot health status
Enumeration
Enumerated Values:
0well
1warning
2timeout
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.12
sleslotStatusOverallState
The slot overrall status
Enumeration
Enumerated Values:
0good
1bad
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.13
sleslotStatusSyncState
The slot sync status
Enumeration
Enumerated Values:
0none
1disable
2process
3done
 .1.3.6.1.4.1.6296.101.2.11.2.1.1.14

sleSlotNosInfoTable

table
.1.3.6.1.4.1.6296.101.2.11.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleSlotNosInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleSlotNosInfoTable' 
Description.
sleSlotNosInfoEntry row .1.3.6.1.4.1.6296.101.2.11.3.1.1
Description.
Indexes
Column Syntax OID
sleSlotNosVersion
NOS version of slot.
OctetString .1.3.6.1.4.1.6296.101.2.11.3.1.1.1
sleSlotNosRevision
NOS revision of slot.
OctetString .1.3.6.1.4.1.6296.101.2.11.3.1.1.2
sleSlotNosSize
NOS size of slot.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.3.1.1.3
sleSlotNosUpgradeStatus
NOS upgrade status of slot.
Enumeration
Enumerated Values:
1upgradeIdle
2upgradeStart
3upgradeDone
4upgradeFail
 .1.3.6.1.4.1.6296.101.2.11.3.1.1.4
sleSlotNosStbVersion
Stand by NOS version of slot
OctetString .1.3.6.1.4.1.6296.101.2.11.3.1.1.5
sleSlotNosStbRevision
Stand by NOS revision of slot.
OctetString .1.3.6.1.4.1.6296.101.2.11.3.1.1.6
sleSlotNosStbSize
Stand by NOS size of slot.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.3.1.1.7

sleSlotPowerMonTable

table
.1.3.6.1.4.1.6296.101.2.11.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleSlotPowerMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleSlotPowerMonTable' 
The Power-Monitoring table.
sleSlotPowerMonEntry row .1.3.6.1.4.1.6296.101.2.11.5.1.1
The Power-Monitoring entry.
Indexes
Column Syntax OID
sleSlotPowerMonIndex
The physical index of power-monitoring object.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6296.101.2.11.5.1.1.1
sleSlotPowerMonStatus
The monitoring status of power-monitoring object.
Enumeration
Enumerated Values:
1unknown
2good
3bad
4over
5under
6overUnder
 .1.3.6.1.4.1.6296.101.2.11.5.1.1.2
sleSlotPowerMonVoltage
The voltage value of power-monitoring object.
value 10000(1000v) indicate that FUSE.
0.1vSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.2.11.5.1.1.3

sleSlotProtectionIUTable

table
.1.3.6.1.4.1.6296.101.2.11.7.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleSlotProtectionIUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleSlotProtectionIUTable' 
Description.
sleSlotProtectionIUEntry row .1.3.6.1.4.1.6296.101.2.11.7.2.1.1
Description.
Indexes
No indexes recorded
Column Syntax OID
sleSlotProtectionIUTemperHighThresh
The Slot temperature High-threshold of overtemperature alarm
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.11.7.2.1.1.1
sleSlotProtectionIUTemperLowThresh
The Slot temperature Low-threshold of overtemperature alarm
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.11.7.2.1.1.2
sleSlotProtectionIUPowerThresh
The Slot temperature threshold of overtemperature power shutdown.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.11.7.2.1.1.3
sleSlotProtectionIUTemper
The Slot temperature.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.11.7.2.1.1.4
sleSlotProtectionIUTemper2
The Slot temperature2.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.11.7.2.1.1.5

sleRfPortTable

table
.1.3.6.1.4.1.6296.101.2.12.4 · 1 row entry · 3 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleRfPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleRfPortTable' 
Description.
sleRfPortEntry row .1.3.6.1.4.1.6296.101.2.12.4.1
Description.
Indexes
Column Syntax OID
sleRfPortIndex
The RF port index.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.6296.101.2.12.4.1.1
sleRfPortAdminStatus
The RF port adminStatus.
Enumerationr/w
Enumerated Values:
1enable
2disable
255na
 .1.3.6.1.4.1.6296.101.2.12.4.1.2
sleRfPortOperStatus
The RF port operStatus.
Enumerationr/w
Enumerated Values:
1enable
2disable
255na
 .1.3.6.1.4.1.6296.101.2.12.4.1.3

sleEMTable

table
.1.3.6.1.4.1.6296.101.2.13.1 · 1 row entry · 4 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleEMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleEMTable' 
Description.
sleEMEntry row .1.3.6.1.4.1.6296.101.2.13.1.1
Description.
Indexes
Column Syntax OID
sleEMInputIndex
The environment monitoring input index(1-4).
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.6296.101.2.13.1.1.1
sleEMAlarmString
The alarm string
OctetString .1.3.6.1.4.1.6296.101.2.13.1.1.2
sleEMAlarmSeverity
The alarm severity.
Enumeration
Enumerated Values:
0none
1critical
2major
3minor
4warning
5intermediate
 .1.3.6.1.4.1.6296.101.2.13.1.1.3
sleEMmode
The environment monitoring mode.(default:normal-close)
Enumeration
Enumerated Values:
0normalClose
1normalOpen
 .1.3.6.1.4.1.6296.101.2.13.1.1.4

sleBypassOptionConnectivityTable

table
.1.3.6.1.4.1.6296.101.2.14.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleBypassOptionConnectivityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleBypassOptionConnectivityTable' 
The connectivity option of bypass
sleBypassOptionConnectivityEntry row .1.3.6.1.4.1.6296.101.2.14.2.1.1
Description.
Indexes
Column Syntax OID
sleBypassOptionConnectivityAddress
The target IP address of bypass health-checking
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6296.101.2.14.2.1.1.1
sleBypassOptionConnectivityPort
The target port of bypass health-checking.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.14.2.1.1.2

sleBypassOptionPingTable

table
.1.3.6.1.4.1.6296.101.2.14.2.4 · 1 row entry · 6 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleBypassOptionPingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleBypassOptionPingTable' 
Description.
sleBypassOptionPingEntry row .1.3.6.1.4.1.6296.101.2.14.2.4.1
Description.
Indexes
Column Syntax OID
sleBypassOptionPingAddress
The target IP address of bypass ping health checking
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6296.101.2.14.2.4.1.1
sleBypassOptionPingTransInterval
The ping transaction interval
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.14.2.4.1.2
sleBypassOptionPingTranNumber
The ping transaction request number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.14.2.4.1.3
sleBypassOptionPingReqInterval
The ping request interval
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.14.2.4.1.4
sleBypassOptionPingReqTimeout
The ping request timeout
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.14.2.4.1.5
sleBypassOptionPingLossThresh
The ping loss threshold
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6296.101.2.14.2.4.1.6

sleBypassOptionLinkMonitorTable

table
.1.3.6.1.4.1.6296.101.2.14.2.7 · 1 row entry · 2 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleBypassOptionLinkMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleBypassOptionLinkMonitorTable' 
Description.
sleBypassOptionLinkMonitorEntry row .1.3.6.1.4.1.6296.101.2.14.2.7.1
Description.
Indexes
Column Syntax OID
sleBypassOptionLinkMonitorPort
The port of bypass link health-checking
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.2.14.2.7.1.1
sleBypassOptionLinkMonitorPortStatus
The port status of bypass link health-checking
Enumeration
Enumerated Values:
1enable
 .1.3.6.1.4.1.6296.101.2.14.2.7.1.2

sleHFCTable

table
.1.3.6.1.4.1.6296.101.2.15.1 · 1 row entry · 34 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleHFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-DEVICE-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-DEVICE-MIB::sleHFCTable' 
Description.
sleHFCEntry row .1.3.6.1.4.1.6296.101.2.15.1.1
Description.
Indexes
Column Syntax OID
sleHFCOptic1550OTX
HFC Optic 1550 OTX value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.1
sleHFCOptic1550OTXAlarm
HFC Optic 1550 OTX alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.2
sleHFCOpticUpstreamOTX
HFC Optic Upstream OTX value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.3
sleHFCOpticUpstreamOTXAlarm
HFC Optic Upstream OTX alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.4
sleHFCOpticDownstreamORX
HFC Optic Downstream ORX value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.5
sleHFCOpticDownstreamORXAlarm
HFC Optic Downstream ORX alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.6
sleHFCEDFA1OTX
HFC EDFA1 OTX value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.7
sleHFCEDFA1OTXAlarm
HFC EDFA1 OTX alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.8
sleHFCEDFA1ORX
HFC EDFA1 ORX value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.9
sleHFCEDFA1ORXAlarm
HFC EDFA1 ORX alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.10
sleHFCEDFA1LD1Current
HFC EDFA1 LD1 Current value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.11
sleHFCEDFA1LD1CurrentAlarm
HFC EDFA1 LD1 Current alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.12
sleHFCEDFA1LD2Current
HFC EDFA1 LD2 Current value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.13
sleHFCEDFA1LD2CurrentAlarm
HFC EDFA1 LD2 Current alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.14
sleHFCEDFA1LD1Temp
HFC EDFA1 LD1 Temp value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.15
sleHFCEDFA1LD1TempAlarm
HFC EDFA1 LD1 Temp alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.16
sleHFCEDFA1LD2Temp
HFC EDFA1 LD2 Temp value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.17
sleHFCEDFA1LD2TempAlarm
HFC EDFA1 LD2 Temp alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.18
sleHFCEDFA1CaseTemp
HFC EDFA1 Case Temp value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.19
sleHFCEDFA1CaseTempAlarm
HFC EDFA1 Case Temp alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.20
sleHFCEDFA2OTX
HFC EDFA2 OTX value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.21
sleHFCEDFA2OTXAarm
HFC EDFA2 OTX alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.22
sleHFCEDFA2ORX
HFC EDFA2 ORX value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.23
sleHFCEDFA2ORXAlarm
HFC EDFA2 ORX alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.24
sleHFCEDFA2LD1Current
HFC EDFA2 LD1 Current value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.25
sleHFCEDFA2LD1CurrentAlarm
HFC EDFA2 LD1 Current alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.26
sleHFCEDFA2LD2Current
HFC EDFA2 LD2 Current value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.27
sleHFCEDFA2LD2CurrentAlarm
HFC EDFA2 LD2 Current alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.28
sleHFCEDFA2LD1Temp
HFC EDFA2 LD1 Temp value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.29
sleHFCEDFA2LD1TempAlarm
HFC EDFA2 LD1 Temp alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.30
sleHFCEDFA2LD2Temp
HFC EDFA2 LD2 Temp value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.31
sleHFCEDFA2LD2TempAlarm
HFC EDFA2 LD2 Temp alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.32
sleHFCEDFA2CaseTemp
HFC EDFA2 Case Temp value.
OctetString .1.3.6.1.4.1.6296.101.2.15.1.1.33
sleHFCEDFA2CaseTempAlarm
HFC EDFA2 Case Temp alarm status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.6296.101.2.15.1.1.34