SLAPM-MIB Table View

Defines a table to provide information on the
individually components that are mapped to
a policy rule (or old traffic profile).
          
The indexing for this table is designed to support
the use of an SNMP GET-NEXT operation using only
the remote address and remote port as a way for
a management station to retrieve the table entries
relating to a particular client.

slapmSubcomponentEntry row .1.3.6.1.3.88.1.2.3.1

Describes a particular subcomponent entry. This
table does not have an OwnerIndex as
part of its indexing since this table's contents
is intended to span multiple users.

Indexes

slapmSubcomponentRemAddress slapmSubcomponentRemPort slapmSubcomponentLocalAddress slapmSubcomponentLocalPort

Column	Syntax	OID
slapmSubcomponentRemAddress Indicate the remote address of a subcomponent. A remote address can be either an ipv4 address in which case 4 octets are required or as an ipv6 address that requires 16 octets. The value of this subident…	OctetString Constraints: range: 16-16 range: 4-4 range: 0-0	.1.3.6.1.3.88.1.2.3.1.1
slapmSubcomponentRemPort Indicate the remote port of a subcomponent. The value of this subidentifier is 0 when this entry relates to a UDP listener.	Integer32 Constraints: range: 0-65535	.1.3.6.1.3.88.1.2.3.1.2
slapmSubcomponentLocalAddress Indicate the local address of a subcomponent. A local address can be either an ipv4 address in which case 4 octets are required or as an ipv6 address that requires 16 octets.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.3.88.1.2.3.1.3
slapmSubcomponentLocalPort Indicate the local port of a subcomponent.	Integer32 Constraints: range: 0-65535	.1.3.6.1.3.88.1.2.3.1.4
slapmSubcomponentProtocol Indicate the protocol in use that identifies the type of subcomponent.	Enumeration Enumerated Values: 1 udpListener 2 tcpConnection	.1.3.6.1.3.88.1.2.3.1.5
slapmSubcomponentSystemAddress Address of a system that an Policy definition relates to. A zero length octet string can be used to indicate that only a single system is being represented. Otherwise, the length of the octet string should be 4 for an i…	OctetString Constraints: range: 16-16 range: 4-4 range: 0-0	.1.3.6.1.3.88.1.2.3.1.6
slapmSubcomponentPolicyNamedeprecated Policy name that this entry relates to. This object, along with slapmSubcomponentTrafficProfileName, have been replaced with the use of an unsigned integer index that is mapped to an slapmPolicyNameEntry …	SlapmNameType Type Constraints: range: 0..32	.1.3.6.1.3.88.1.2.3.1.7
slapmSubcomponentTrafficProfileNamedeprecated The corresponding traffic profile name. This object, along with slapmSubcomponentProfileName, have been replaced with the use of an unsigned integer index that is mapped to an slapmPolicyNameEntry to actu…	SlapmNameType Type Constraints: range: 0..32	.1.3.6.1.3.88.1.2.3.1.8
slapmSubcomponentLastActivity The date and timestamp of when this entry was last used.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.3.88.1.2.3.1.9
slapmSubcomponentInOctets The number of octets received from IP for this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.10
slapmSubcomponentOutOctets The number of octets sent to IP for this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.11
slapmSubcomponentTcpOutBufferedOctets Number of outgoing octets buffered. The value of this object is zero when the entry is not for a TCP connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.12
slapmSubcomponentTcpInBufferedOctets Number of incoming octets buffered. The value of this object is zero when the entry is not for a TCP connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.13
slapmSubcomponentTcpReXmts Number of retransmissions. The value of this object is zero when the entry is not for a TCP connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.14
slapmSubcomponentTcpRoundTripTime The amount of time that has elapsed, measured in milliseconds, from when the last TCP segment was transmitted by the TCP Stack until the ACK was received. The value of this object is zero when the entry i…	millisecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.88.1.2.3.1.15
slapmSubcomponentTcpRoundTripVariance Round trip time variance. The value of this object is zero when the entry is not for a TCP connection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.88.1.2.3.1.16
slapmSubcomponentInPdus The number of protocol related data units transferred inbound: slapmSubcomponentProtocol PDU Type udpListener(1) UDP datagrams tcpConnection(2) TCP segmen…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.17
slapmSubcomponentOutPdus The number of protocol related data units transferred outbound: slapmSubcomponentProtocol PDU Type udpListener(1) UDP datagrams tcpConnection(2) …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.18
slapmSubcomponentApplName The application name associated with this entry if known, otherwise a zero-length octet string is returned as the value of this object.	OctetString Constraints: range: 0-32	.1.3.6.1.3.88.1.2.3.1.19
slapmSubcomponentMonitorStatus The value of this object indicates when a monitored value has exceeded a threshold or isn't meeting the defined service level. Only the following SlapmStatus BITS setting can be reported here: …	SlapmStatus Type Values: 0 slaMinInRateNotAchieved 1 slaMaxInRateExceeded 2 slaMaxDelayExceeded 3 slaMinOutRateNotAchieved 4 slaMaxOutRateExceeded 5 monitorMinInRateNotAchieved 6 monitorMaxInRateExceeded 7 monitorMaxDelayExceeded 8 monitorMinOutRateNotAchieved 9 monitorMaxOutRateExceeded	.1.3.6.1.3.88.1.2.3.1.20
slapmSubcomponentMonitorIntTime The timestamp for when the last interval ended. This object only has meaning when an corresponding slapmPRMonEntry (or old slapmPolicyMonitorEntry) exists with the slapmPRMonControl (or slapmPolicyMonitor…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.3.88.1.2.3.1.21
slapmSubcomponentMonitorCurrentInRate Using the value of the corresponding slapmPRMonInterval (or slapmPolicyMonitorInterval), slapmSubcomponentStatsInOctets is divided by slapmSubcomponentMonitorInterval to determine the current in transfer rate. …	kilobits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.22
slapmSubcomponentMonitorCurrentOutRate Using the value of the corresponding slapmPRMonInterval (or slapmPolicyMonitorInterva)l, slapmSubcomponentStatsOutOctets is divided by slapmPRMonInterval (or slapmPolicyMonitorInterval) to determine the current out tran…	kilobits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.3.1.23
slapmSubcomponentPolicyRuleIndex Points to an slapmPolicyNameEntry when combined with slapmSubcomponentSystemAddress to indicate the policy naming that relates to this entry. A value of 0 for this object MUST be returned when the corresp…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.3.88.1.2.3.1.24

Provides the mapping between a policy index as a
unsigned 32 bit integer and the unique name associated
with a policy rule.

slapmPolicyNameEntry row .1.3.6.1.3.88.1.2.4.1

Defines an entry in the slapmPolicyNameTable.

Indexes

slapmPolicyNameSystemAddress slapmPolicyNameIndex

Column	Syntax	OID
slapmPolicyNameSystemAddress Address of a system that an Policy rule definition relates to. A zero length octet string must be used to indicate that only a single system is being represented. Otherwise, the length of the octet strin…	OctetString Constraints: range: 16-16 range: 4-4 range: 0-0	.1.3.6.1.3.88.1.2.4.1.1
slapmPolicyNameIndex A locally arbitrary, but unique identifier associated with this table entry. This value is not expected to remain constant across reIPLs.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.3.88.1.2.4.1.2
slapmPolicyNameOfRule The unique name that identifies a policy rule definition.	SlapmPolicyRuleName Type Constraints: range: 0..1024	.1.3.6.1.3.88.1.2.4.1.3

Provides statistics on a per system and a per policy
rule basis.

slapmPolicyRuleStatsEntry row .1.3.6.1.3.88.1.2.5.1

Defines an entry in the slapmPolicyRuleStatsTable.
This table defines a set of statistics that is kept
on a per system and per policy rule basis.

Entries in this table are not created or deleted via SNMP
bu…

Indexes

slapmPolicyNameSystemAddress slapmPolicyNameIndex

Column	Syntax	OID
slapmPolicyRuleStatsOperStatus The state of a policy entry: inactive(1) - An policy entry was either defined by local system definition or discovered via a directory search …	Enumeration Enumerated Values: 1 inactive 2 active 3 deleteNeeded	.1.3.6.1.3.88.1.2.5.1.1
slapmPolicyRuleStatsActiveConns The number of active TCP connections that are affected by the corresponding policy entry.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.2
slapmPolicyRuleStatsTotalConns The number of total TCP connections that are affected by the corresponding policy entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.3
slapmPolicyRuleStatsLActivated The timestamp for when the corresponding policy entry was last activated. The value of this object serves as the discontinuity event indicator when polling entries in this table. The value of this object is updated on…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.3.88.1.2.5.1.4
slapmPolicyRuleStatsLastMapping The timestamp for when the last time that the associated policy entry was used.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.3.88.1.2.5.1.5
slapmPolicyRuleStatsInOctets The number of octets that was received by IP for an entity that map to this entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.6
slapmPolicyRuleStatsOutOctets The number of octets that was transmitted by IP for an entity that map to this entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.7
slapmPolicyRuleStatsConnLimit The limit for the number of active TCP connections that are allowed for this policy definition. A value of zero for this object implies that a connection limit has not been specified.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.8
slapmPolicyRuleStatsCountAccepts This counter is incremented when a policy action's Permission value is set to Accept and a session (TCP connection) is accepted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.9
slapmPolicyRuleStatsCountDenies This counter is incremented when a policy action's Permission value is set to Deny and a session is denied, or when a session (TCP connection) is rejected due to a policy's connection limit (slapmPolicyRuleStatsConnectL…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.10
slapmPolicyRuleStatsInDiscards This counter counts the number of in octets discarded. This occurs when an error is detected. Examples of this are buffer overflow, checksum error, or bad packet format.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.11
slapmPolicyRuleStatsOutDiscards This counter counts the number of out octets discarded. Examples of this are buffer overflow, checksum error, or bad packet format.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.12
slapmPolicyRuleStatsInPackets This counter counts the number of in packets received that relate to this policy entry from IP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.13
slapmPolicyRuleStatsOutPackets This counter counts the number of out packets sent by IP that relate to this policy entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.14
slapmPolicyRuleStatsInProOctets This counter counts the number of in octets that are determined to be within profile.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.15
slapmPolicyRuleStatsOutProOctets This counter counts the number of out octets that are determined to be within profile.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.16
slapmPolicyRuleStatsMinRate The minimum transfer rate defined for this entry.	Kilobits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.17
slapmPolicyRuleStatsMaxRate The maximum transfer rate defined for this entry.	Kilobits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.18
slapmPolicyRuleStatsMaxDelay The maximum delay defined for this entry.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.19
slapmPolicyRuleStatsTotalRsvpFlows Total number of RSVP flows that have be activated.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.20
slapmPolicyRuleStatsActRsvpFlows Current number of active RSVP flows.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.5.1.21

Provides a method of monitoring policies and their
effect at a system.

slapmPRMonEntry row .1.3.6.1.3.88.1.2.6.1

Defines an entry in the slapmPRMonTable. This
table defines which policies should be monitored on a
per policy rule basis.

An attempt to set any read-create object defined within an
slapmPRMonEntry while th…

Indexes

slapmPRMonOwnerIndex slapmPRMonSystemAddress slapmPRMonIndex

Column	Syntax	OID
slapmPRMonOwnerIndex To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entri…	OctetString Constraints: range: 0-16	.1.3.6.1.3.88.1.2.6.1.1
slapmPRMonSystemAddress Address of a system that an Policy definition relates to. A zero length octet string can be used to indicate that only a single system is being represented. Otherwise, the length of the octet string should be 4 for an i…	OctetString Constraints: range: 16-16 range: 4-4 range: 0-0	.1.3.6.1.3.88.1.2.6.1.2
slapmPRMonIndex An slapmPolicyNameTable index, slapmPolicyNameIndex, that points to the unique name associated with a policy rule definition.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.3
slapmPRMonControl The value of this object determines the type and level of monitoring that is applied to a policy rule. The value of this object can't be changed once the table entry that it is a part of is activated via a slapmPRMonRo…	Bitsr/w Enumerated Values: 0 monitorMinRate 1 monitorMaxRate 2 monitorMaxDelay 3 enableAggregateTraps 4 enableSubcomponentTraps 5 monitorSubcomponents	.1.3.6.1.3.88.1.2.6.1.4
slapmPRMonStatus The value of this object indicates when a monitored value has not meet a threshold or isn't meeting the defined service level. The SlapmStatus TEXTUAL-CONVENTION defines two levels of not meeting a threshold. The firs…	SlapmStatus Type Values: 0 slaMinInRateNotAchieved 1 slaMaxInRateExceeded 2 slaMaxDelayExceeded 3 slaMinOutRateNotAchieved 4 slaMaxOutRateExceeded 5 monitorMinInRateNotAchieved 6 monitorMaxInRateExceeded 7 monitorMaxDelayExceeded 8 monitorMinOutRateNotAchieved 9 monitorMaxOutRateExceeded	.1.3.6.1.3.88.1.2.6.1.5
slapmPRMonInterval The number of seconds that defines the sample period.	secondsUnsigned32r/w Constraints: range: 15-86400	.1.3.6.1.3.88.1.2.6.1.6
slapmPRMonIntTime The timestamp for when the last interval ended.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.3.88.1.2.6.1.7
slapmPRMonCurrentInRate Using the value of the corresponding slapmPRMonInterval, slapmPolicyRuleStatsInOctets is sampled and then divided by slapmPRMonInterval to determine the current in transfer rate.	kilobits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.8
slapmPRMonCurrentOutRate Using the value of the corresponding slapmPolicyMonInterval, slapmPolicyRuleStatsOutOctets is sampled and then divided by slapmPRMonInterval to determine the current out transfer rate.	kilobits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.9
slapmPRMonMinRateLow The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored minimum transfer rate has not been meet. A slapmPolicyRuleMonNotOkay notification is not generated again …	kilobits per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.10
slapmPRMonMinRateHigh The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored minimum transfer rate has increased to an acceptable level. A value of zero for this object is returned when…	kilobits per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.11
slapmPRMonMaxRateHigh The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored maximum transfer rate has been exceeded. A slapmPolicyRuleNotOkay notification is not generated again for…	kilobits per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.12
slapmPRMonMaxRateLow The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored maximum transfer rate has fallen to an acceptable level. A value of zero for this object is returned when th…	kilobits per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.13
slapmPRMonMaxDelayHigh The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored maximum delay rate has been exceeded. A slapmPolicyRuleMonNotOkay notification is not generated again for…	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.14
slapmPRMonMaxDelayLow The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored maximum delay rate has fallen to an acceptable level. A value of zero for this object is returned when the s…	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.15
slapmPRMonMinInRateNotAchieves The number of times that a minimum transfer in rate was not achieved.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.16
slapmPRMonMaxInRateExceeds The number of times that a maximum transfer in rate was exceeded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.17
slapmPRMonMaxDelayExceeds The number of times that a maximum delay in rate was exceeded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.18
slapmPRMonMinOutRateNotAchieves The number of times that a minimum transfer out rate was not achieved.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.19
slapmPRMonMaxOutRateExceeds The number of times that a maximum transfer out rate was exceeded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.20
slapmPRMonCurrentDelayRate The current delay rate for this entry. This is calculated by taking the average of the TCP round trip times for all associating slapmSubcomponentTable entries within a interval.	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.88.1.2.6.1.21
slapmPRMonRowStatus This object allows entries to be created and deleted in the slapmPRMonTable. An entry in this table is deleted by setting this object to destroy(6). Removal of an corresponding (same policy index) …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.3.88.1.2.6.1.22