SL-VCG-MIB Table View

The table containing status information on the relationships
between the VCG and STS sub-layers of network interfaces.

vcgStackStatusEntry row .1.3.6.1.4.1.4515.1.1.10.1.1.1.1

Information on a particular relationship between two
sub-layers, specifying that one sub-layer runs on
'top' of the other sub-layer.
Each sub-layer corresponds to a conceptual row in the ifTable.
The rows in the table…

Indexes

vcgStackLinkIndex vcgStackStsIndex

Column	Syntax	OID
vcgStackLinkIndex The value of the VCG link ifIndex corresponding to the higher-layer of the relationship. The structure of the VCG link ifIndex is: Slot=0, Port=trunk port number Type=219 Path=GID.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.1
vcgStackStsIndex The value of the STS ifIndex corresponding to the lower-layer of the relationship. The structure of the STS ifIndex is: Slot=0 Port=trunk port Type=50 Path=1st sts number in the sonet path.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.2
vcgStackPathWidth The width of the path	Enumerationr/w Enumerated Values: 1 vtWidth45STS1 3 vtWidth155STS3 11 vtWidth15VC11 12 vtWidth2VC12	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.3
vcgStackSts1Mapping In the case of sdh sts1 path there are two possibilities for mapping: 1. c3->vc3->tu3->tug3-x3->vc4->au4->aug1 ::tu3(1) 2. c3->vc3->au3-x3->aug1 ::au3(2) 3. Otherwise ::na(3)	Enumerationr/w Enumerated Values: 1 tu3 2 au3 3 na	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.4
vcgStackTxSequenceNumber The tx sequence number of this path.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.5
vcgStackLcasStatusOper The oper status of the relationship between two sub-layers. This value is determined by the Admin status and the Source State and the Sink State of the vcat member.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.6
vcgStackLcasStatusAdmin The admin status of the vcat member. This is relevant only for PL-20. For PL-100 all members are active.	Enumerationr/w Enumerated Values: 1 active 2 nonActive	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.7
vcgStackLcasSourceState The Lcas Source State of the Vcat member.	Enumerationr/w Enumerated Values: 1 norm 2 dnu 3 add 4 idle	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.8
vcgStackLcasSinkState The Lcas Sink State of the Vcat member.	Enumerationr/w Enumerated Values: 1 ok 2 fail 3 idle	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.9
vcgStackStatusRow The row status of the relationship between two sub-layers.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.10

A table that contains, one entry for each Vcg interface in the,
configuration and service parameters of the Vcg Channel.

vcgLinkConfigEntry row .1.3.6.1.4.1.4515.1.1.10.1.1.2.1

An entry containing the result configuration and service parameters
of a Vcg Channel.
A new entry is created each when an entry is added to the vcgChannelConfigTable
with a new VCG-if index.
An entry is automaticaly del…

Indexes

vcgLinkConfigIndex

Column	Syntax	OID
vcgLinkConfigIndex The ifIndex of the VCG link. This index is composed of: Slot=0, Port=trunk port number, Type=219, Path=group id.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.1
vcgLinkConfigType The type of the vcat group as configured by the NMS.	VcgLinkTyper/w Type Values: 1 framed 2 transparent 3 pos	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.2
vcgLinkConfigLcasSupport Should this channel support the LCAS protocol. Configured by the NMS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.3
vcgLinkConfigExtensionSupport Should this channel support the GFP extension. Configured by the NMS. This field should be true if there aremore than one channel on the same VCG.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.4
vcgLinkConfigResetPmCounters Setting this variable to 1 will cause the current interval VCG PM counters of the Channel to be initialized to zero (0).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.5
vcgLinkConfigValidIntervals The number of previous near end intervals for which data was collected.	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.6
vcgLinkConfigLcasHoldOfTime The number of milli-seconds to wait before the Lcas make a transition from Good state to Bad state.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.7
vcgLinkConfigLcasWaitToRestoreTime The number of milli-seconds to wait before the Lcas make a transition from Bad state to Good state.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.8
vcgLinkConfigStackApplyChanges Writing to this object applies the changes done to the vcgStackStatusTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.9

The VCG current table contains various statistics
being collected for the current 15 minute
interval.

vcgLinkCurrentEntry row .1.3.6.1.4.1.4515.1.1.10.1.2.1.1

An entry in the VCG Current table.

Indexes

vcgLinkCurrentIndex

Column	Syntax	OID
vcgLinkCurrentIndex The index value which uniquely identifies the VCG interface to which this entry is applicable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4515.1.1.10.1.2.1.1.1
vcgLinkCurrentRxVcatSyncLossSeconds The number of seconds a VCAT sync loss was detected during this interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.1.10.1.2.1.1.2
vcgLinkCurrentRxLcasCrcErrors The number of Received Lcas messages with CRC error.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.1.10.1.2.1.1.3

The VCG current table contains various statistics
being collected for the current 15 minute
interval.

vcgLinkIntervalEntry row .1.3.6.1.4.1.4515.1.1.10.1.2.2.1

An entry in the VCG Interval table.

Indexes

vcgLinkIntervalIndex vcgLinkIntervalNumber

Column	Syntax	OID
vcgLinkIntervalIndex The index value which uniquely identifies the VCG interface to which this entry is applicable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.1
vcgLinkIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.2
vcgLinkIntervalRxVcatSyncLossSeconds The number of seconds a VCAT sync loss was detected during this interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.3
vcgLinkIntervalRxLcasCrcErrors The number of Lcas messages with CRC error occurences during the interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.4

The Link day table contains various statistics
being collected for the pervious 24 hours.
interval.

vcgLinkDayEntry row .1.3.6.1.4.1.4515.1.1.10.1.2.3.1

An entry in the Link Day table.

Indexes

vcgLinkDayIndex vcgLinkDayNumber

Column	Syntax	OID
vcgLinkDayIndex The index value which uniquely identifies the Link interface to which this entry is applicable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.1
vcgLinkDayNumber A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval i…	Integer32 Constraints: range: 1-33	.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.2
vcgLinkDayRxVcatSyncLossSeconds The number of seconds a VCAT sync loss was detected during this interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.3
vcgLinkDayRxLcasCrcErrors The number of Lcas messages with CRC error occurences during the interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.4