SL-SECU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
14

slSecuSelectTable

table
.1.3.6.1.4.1.4515.1.3.24.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the packetlight variant from /opt/observium/mibs/packetlight.
Command help
Walk slSecuSelectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SL-SECU-MIB' -M '/opt/observium/mibs/packetlight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SL-SECU-MIB::slSecuSelectTable' 
The security protocol selection table.
slSecuSelectEntry row .1.3.6.1.4.1.4515.1.3.24.2.1.1
An entry in the security selection table.
Indexes
Column Syntax OID
slSecuSelectType
The secutity protocol type
SlSecuType
Type Values:
1telnet
2ssh
3http
4https
5icmp
6snmp
7ftp
8tftp
9tl1
10tl1ssh
11wl
 .1.3.6.1.4.1.4515.1.3.24.2.1.1.1
slSecuSelectPort
The corresponding port number of the protocol.
Port number 0 is used when not applicable/available.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.3.24.2.1.1.2
slSecuSelectEnable
True - Enables the firewall for the corresponding protocol.
False - Dsables the firewall for the corresponding protocol.
When enabled the firewall blocks the protocol.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4515.1.3.24.2.1.1.3

slSecuWlTable

table
.1.3.6.1.4.1.4515.1.3.24.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the packetlight variant from /opt/observium/mibs/packetlight.
Command help
Walk slSecuWlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SL-SECU-MIB' -M '/opt/observium/mibs/packetlight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SL-SECU-MIB::slSecuWlTable' 
This white list table.
slSecuWlEntry row .1.3.6.1.4.1.4515.1.3.24.3.1.1
A particular IP address.
Indexes
Column Syntax OID
slSecuWlIp
The IP address to allow
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4515.1.3.24.3.1.1.1
slSecuWlMask
Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the slSecuWlIp field.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4515.1.3.24.3.1.1.2
slSecuWlStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4515.1.3.24.3.1.1.3

slSecuEncryptionTable

table
.1.3.6.1.4.1.4515.1.3.24.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the packetlight variant from /opt/observium/mibs/packetlight.
Command help
Walk slSecuEncryptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SL-SECU-MIB' -M '/opt/observium/mibs/packetlight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SL-SECU-MIB::slSecuEncryptionTable' 
The encryption table. This table has an entry per transponder.
slSecuEncryptionEntry row .1.3.6.1.4.1.4515.1.3.24.4.1.1
This entry is used to control the necryption per transponder.
Indexes
Column Syntax OID
slSecuEncryptionIfIndex
The Interface Index of the uplink port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.1
slSecuEncryptionEnable
Enable/Disable the encryption on this uplink.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.2
slSecuEncryptionStatus
The state of the encryption finite state machine.
Enumeration
Enumerated Values:
1init
2exchange
3kdf
4active
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.3
slSecuEncryptionForceInit
Writing this valiable forces init to the encryption state machine.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.4
slSecuEncryptionPreShared
The pre-shared secret.
Either the pre-shared key, or the shared secret to avoid Mitm when using DH public key exchange.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.5
slSecuEncryptionKeyExchangePeriod
The Key Exchage Period, specified in minutes.
The value 0 means to perform the key exchange only once at link establishment.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.6
slSecuEncryptionLock
Lock/Unlock the encrypted service for this uplink.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.7
slSecuEncryptionProtectedStatus
The protected port state of the encryption finite state machine.
Enumeration
Enumerated Values:
1init
2exchange
3kdf
4active
 .1.3.6.1.4.1.4515.1.3.24.4.1.1.8