SL-ENTITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
23

slEntPhysicalTable

table
.1.3.6.1.4.1.4515.1.3.6.1.1 · 1 row entry · 23 columns
Open in standard view
Uses the packetlight variant from /opt/observium/mibs/packetlight.
Command help
Walk slEntPhysicalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SL-ENTITY-MIB' -M '/opt/observium/mibs/packetlight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SL-ENTITY-MIB::slEntPhysicalTable' 
This table contains one row per physical entity.  There is
always at least one row for an 'overall' physical entity.
slEntPhysicalEntry row .1.3.6.1.4.1.4515.1.3.6.1.1.1
Information about a particular physical entity.
Indexes
Column Syntax OID
slEntPhysicalIndex
The Slot number of the entity.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.1
slEntPhysicalDescr
A textual description of physical entity. This object
should contain a string which identifies the manufacturer's
name for the physical entity, and should be set to a
distinct value for each version or model of the phy…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.2
slEntPhysicalClass
An indication of the general hardware type of the physical
entity.

An agent should set this object to the standard enumeration
value which most accurately indicates the general class of
the physical entit…
PhysicalClass
Type Values:
1other
2unknown
3chassis
4backplane
5container
6powerSupply
7fan
8sensor
9module
10port
11stack
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.3
slEntPhysicalHardwareRev
The vendor-specific hardware revision string for the
physical entity. The preferred value is the hardware
revision identifier actually printed on the component itself
(if present).

Note that if revision …
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.4
slEntPhysicalFirmwareRev
The vendor-specific firmware revision string for the
physical entity (normally the boot-revision).

Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.5
slEntPhysicalSoftwareRev
The vendor-specific software revision string for the
physical entity.

Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such info…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.6
slEntPhysicalSerialNum
The vendor-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).

On the first instantiation of an p…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.7
slEntPhysicalProtectionEntity
The value of slEntPhysicalIndex for the physical entity which
'protects' this physical entity. A value of zero indicates
this physical entity has no protecting physical
entity.
This object is not applicable should the …
PhysicalIndex
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.8
slEntPhysicalProtectState
The protection state of physical entity.
This object is not applicable should the protection be done
on a per-port basis.
In the case of Switch protection the following logic should be used:
1. If there is only one card…
Enumeration
Enumerated Values:
1working
2protecting
3noProtection
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.9
slEntPhysicalProtectMode
The protection mode of physical entity.
The default value is automatic(3)
This object is not applicable should the protection be done
on a per-port basis.
Enumerationr/w
Enumerated Values:
1lock
2force
3automatic
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.14
slEntPhysicalStatus
The physical entity status bitmap:
1 - Card is removed from the slot
2 - Communication Fault
4 - Major alarm inherited from the ports
8 - Card or port HW failure
16 - An internal SW failure detect…
Integer32
Constraints:
range: 0-1023
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.15
slEntPhysicalFailureDescription
Text that describes the last entity failure.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.16
slEntPhysicalAdminStatus
The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ifAdminStatus in the down(2)
state. As a resu…
Enumerationr/w
Enumerated Values:
1up
2down
3testing
4warmBoot
5coldBoot
7hotBoot
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.17
slEntPhysicalOperStatus
The current operational state of the interface.
If slEntPhysicalAdminStatus is down(2) then
slEntPhysicalOperStatus should be down(2).
If slEntPhysicalAdminStatus is changed to up(1)
then slEntPhysicalOperStatus sho…
Enumeration
Enumerated Values:
1up
2down
3testing
6notPresent
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.18
slEntPhysicalSysUptime
The number of timer ticks since the last reboot of the module.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.19
slEntPhysicalType
The type of the physical module.
PhysicalType
Type Values:
1powerModule
2fanModule
3switchModule
4trunkModule
5oc12Module
6gbeModule
7fcModule
8passiveModule
9trunkModuleTransponding
10oc3Module
11ds3Module
12oc48tdmModule
13transpondingModule
14edfaModule
15transponding10GModule
16trunk10GModule
17esconModule
18gbeAggModule
19esconTrunkModule
20fc2gModule
90pl16000
91pl10
92pl20
93pl100
94pl400PmPiggy
95pl400MuxPiggy
96pl400
97pl1000
98pl200
99pl400E
100unknown
800pl800
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.20
slEntPhysicalCleiCode
The Clei Code resides in the SEEP of each card.
CleiCode
Type Constraints:
range: 10
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.21
slEntPhysicalPartNumber
The card part number. This is a string of upto 12 characters.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.22
slEntPhysicalOemSerialNum
The oem-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).

On the first instantiation of an phys…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.23
slEntPhysicalProductionDate
The entity production date in the format YYYY-WW.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.24
slEntPhysicalSysTemp
Internally measured module temperature. The value 0 means -128 Celsuis.
An increment on one is equivalent to 1/256 degree,
yielding a total range of -128 to +128 Celsius.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.25
slEntPhysicalSysAlias
The module alias as given by the user.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.26
slEntPhysicalSysSubType
The subtype of the physical module.
The possibel values of this object are drived from the value of slEntPhysicalType.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.3.6.1.1.1.27