SIP-MIB Table View

This table contains SIP L3 parameters and
state variables, one entry per SIPL3 interface.

sipL3Entry row .1.3.6.1.2.1.10.31.1.1

This list contains SIP L3 parameters and
state variables.

Indexes

sipL3Index

Column	Syntax	OID
sipL3Index The value of this object identifies the SIP L3 interface for which this entry contains management information.	IfIndex	.1.3.6.1.2.1.10.31.1.1.1
sipL3ReceivedIndividualDAsdeprecated The total number of individually addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.2
sipL3ReceivedGAsdeprecated The total number of group addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.3
sipL3UnrecognizedIndividualDAsdeprecated The number of SIP Level 3 PDUs received from the remote system with invalid or unknown individual destination addresses (Destination Address Screening violations are not included). See SMDS Subscription …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.4
sipL3UnrecognizedGAsdeprecated The number of SIP Level 3 PDUs received from the remote system with invalid or unknown group addresses. (Destination Address Screening violations are not included). See SMDS Subscription MIB module.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.5
sipL3SentIndividualDAsdeprecated The number of individually addressed SIP Level 3 PDUs that have been sent by this system across the SNI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.6
sipL3SentGAsdeprecated The number of group addressed SIP L3PDUs that have been sent by this system across the SNI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.7
sipL3Errorsdeprecated The total number of SIP Level 3 PDUs received from the remote system that were discovered to have errors (including protocol processing and bit errors but excluding addressing-related errors) and were discarded. Includ…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.8
sipL3InvalidSMDSAddressTypesdeprecated The number of SIP Level 3 PDUs received from the remote system that had the Source or Destination Address_Type subfields, (the four most significant bits of the 64 bit address field), not equal to the value 1100 or 1110…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.1.1.9
sipL3VersionSupport A value which indicates the version(s) of SIP that this interface supports. The value is a sum. This sum initially takes the value zero. For each version, V, that this interface supports, 2 raised to (V…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.31.1.1.10

This table contains SIP L2PDU parameters and
state variables, one entry per SIP L2 interface.

sipL2Entry row .1.3.6.1.2.1.10.31.2.1

This list contains SIP L2 parameters and state
variables.

Indexes

sipL2Index

Column	Syntax	OID
sipL2Index The value of this object identifies the SIP interface for which this entry contains management information.	IfIndex	.1.3.6.1.2.1.10.31.2.1.1
sipL2ReceivedCounts The number of SIP Level 2 PDUs received from the remote system across the SNI. The total includes only unerrored L2PDUs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.2
sipL2SentCounts The number of SIP Level 2 PDUs that have been sent by this system across the SNI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.3
sipL2HcsOrCRCErrors The number of received SIP Level 2 PDUs that were discovered to have either a Header Check Sequence error or a Payload CRC violation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.4
sipL2PayloadLengthErrors The number of received SIP Level 2 PDUs that had Payload Length errors that fall in the following specifications: - SSM L2_PDU payload length field value less - than 28 octets or greater than 44 octets, - BOM or COM L2_…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.5
sipL2SequenceNumberErrors The number of received SIP Level 2 PDUs that had a sequence number within the L2PDU not equal to the expected sequence number of the SMDS SS receive process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.6
sipL2MidCurrentlyActiveErrors The number of received SIP Level 2 PDUs that are BOMs for which an active receive process is already started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.7
sipL2BomOrSSMsMIDErrors The number of received SIP Level 2 PDUs that are SSMs with a MID not equal to zero or are BOMs with MIDs equal to zero.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.8
sipL2EomsMIDErrors The number of received SIP Level 2 PDUs that are EOMs for which there is no active receive process for the MID (i.e., the receipt of an EOM which does not correspond to a BOM) OR the EOM has a MID equal to zero.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.2.1.9

This table contains SIP DS1 PLCP parameters and
state variables, one entry per SIP port.

sipDS1PLCPEntry row .1.3.6.1.2.1.10.31.3.1.1

This list contains SIP DS1 PLCP parameters and
state variables.

Indexes

sipDS1PLCPIndex

Column	Syntax	OID
sipDS1PLCPIndex The value of this object identifies the interface for which this entry contains management information.	IfIndex	.1.3.6.1.2.1.10.31.3.1.1.1
sipDS1PLCPSEFSs A DS1 Severely Errored Framing Second (SEFS) is a count of one-second intervals containing one or more SEF events. A Severely Errored Framing (SEF) event is declared when an error in the A1 octet and an error in the A2…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.3.1.1.2
sipDS1PLCPAlarmState This variable indicates if there is an alarm present for the DS1 PLCP. The value receivedFarEndAlarm means that the DS1 PLCP has received an incoming Yellow Signal, the value incomingLOF means that the DS1 PLCP has dec…	Enumeration Enumerated Values: 1 noAlarm 2 receivedFarEndAlarm 3 incomingLOF	.1.3.6.1.2.1.10.31.3.1.1.3
sipDS1PLCPUASs The counter associated with the number of Unavailable Seconds, as defined by TR-TSV-000773, encountered by the PLCP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.3.1.1.4

This table contains SIP DS3 PLCP parameters and
state variables, one entry per SIP port.

sipDS3PLCPEntry row .1.3.6.1.2.1.10.31.3.2.1

This list contains SIP DS3 PLCP parameters and
state variables.

Indexes

sipDS3PLCPIndex

Column	Syntax	OID
sipDS3PLCPIndex The value of this object identifies the interface for which this entry contains management information.	IfIndex	.1.3.6.1.2.1.10.31.3.2.1.1
sipDS3PLCPSEFSs A DS3 Severely Errored Framing Second (SEFS) is a count of one-second intervals containing one or more SEF events. A Severely Errored Framing (SEF) event is declared when an error in the A1 octet and an error in the A2…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.3.2.1.2
sipDS3PLCPAlarmState This variable indicates if there is an alarm present for the DS3 PLCP. The value receivedFarEndAlarm means that the DS3 PLCP has received an incoming Yellow Signal, the value incomingLOF means that the DS3 PLCP has dec…	Enumeration Enumerated Values: 1 noAlarm 2 receivedFarEndAlarm 3 incomingLOF	.1.3.6.1.2.1.10.31.3.2.1.3
sipDS3PLCPUASs The counter associated with the number of Unavailable Seconds, as defined by TR-TSV-000773, encountered by the PLCP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.31.3.2.1.4

The table of addressing information relevant to
this entity's IP addresses.

ipOverSMDSEntry row .1.3.6.1.2.1.10.31.4.1.1.1

The addressing information for one of this
entity's IP addresses.

Indexes

ipOverSMDSIndex ipOverSMDSAddress

Column	Syntax	OID
ipOverSMDSIndex The value of this object identifies the interface for which this entry contains management information.	IfIndex	.1.3.6.1.2.1.10.31.4.1.1.1.1
ipOverSMDSAddress The IP address to which this entry's addressing information pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.31.4.1.1.1.2
ipOverSMDSHA The SMDS Individual address of the IP station.	SMDSAddress Type Constraints: range: 8	.1.3.6.1.2.1.10.31.4.1.1.1.3
ipOverSMDSLISGA The SMDS Group Address that has been configured to identify the SMDS Subscriber-Network Interfaces (SNIs) of all members of the Logical IP Subnetwork (LIS) connected to the network supporting SMDS.	SMDSAddress Type Constraints: range: 8	.1.3.6.1.2.1.10.31.4.1.1.1.4
ipOverSMDSARPReq The SMDS address (individual or group) to which ARP Requests are to be sent.	SMDSAddress Type Constraints: range: 8	.1.3.6.1.2.1.10.31.4.1.1.1.5

A table that contains the latest occurrence of
the following syntactical SIP L3PDU errors:
          
- Destination Address Field Format Error,
The following pertains to the 60 least significant
bits of the 64 bit address field.  The 60 bits
contained in the address subfield can be used to
represent addresses up to 15 decimal digits.  Each
decimal digit shall be encoded into four bits
using Binary Coded Decimal (BCD), with the most
significant digit occurring left-most.  If not all
15 digits are required, then the remainder of this
field shall be padded on the right with bits set
to one.  An error is considered to have occurred:
a).  if the first four bits of the address
subfield are not BCD, OR b).  if the first four
bits of the address subfield are populated with
the country code value 0001, AND the 40 bits which
follow are not Binary Coded Decimal (BCD) encoded
values of the 10 digit addresses, OR the remaining
16 least significant bits are not populated with
1's, OR c).  if the address subfield is not
correct according to another numbering plan which
is dependent upon the carrier assigning the
numbers and offering SMDS.
          
- Source Address Field Format Error,
The description of this parameter is the same as
the description of the Destination Address Field
Format Error.
          
- Invalid BAsize Field Value,
An error is considered to have occurred when the
BAsize field of an SIP L3PDU contains a value less
that 32, greater than 9220 octets without the
CRC32 field present, greater than 9224 octets with
the CRC32 field present, or not equal to a
multiple of 4 octets,
- Invalid Header Extension Length Field Value,
An error is considered to have occurred when the
Header Extension Length field value is not equal
3.
          
- Invalid Header Extension - Element Length,
An error is considered to have occurred when the
Header Extension - Element Length is greater than
12.
          
- Invalid Header Extension - Version Element
Position, Length, or Value,
An error is considered to have occurred when a
Version element with Length=3, Type=0, and Value=1
does not appear first within the Header Extension,
or an element Type=0 appears somewhere other than
within the first three octets in the Header
Extension.
          
- Invalid Header Extension - Carrier Selection
Element Position, Length, Value or Format,
An error is considered to have occurred when a
Carrier Selection element does not appear second
within the Header Extension, if the Element Type
does not equal 1, the Element Length does not
equal 4, 6, or 8, the Element Value field is not
four BCD encoded decimal digits used in specifying
the Carrier Identification Code (CIC), or the
identified CIC code is invalid.
          
- Header Extension PAD Error
          
An error is considered to have occurred when the
Header Extension PAD is 9 octets in length, or if
the Header Extension PAD is greater than zero
          
octets in length and the Header Extension PAD does
not follow all Header Extension elements or does
not begin with at least one octet of all zeros.
          
- BEtag Mismatch Error,
An error is considered to have occurred when the
Beginning-End Tags in the SIP L3PDU header and
trailer are not equal.
          
- BAsize Field not equal to Length Field Error,
An error is considered to have occurred when the
value of the BAsize Field does not equal the value
of the Length Field.
          
- Incorrect Length Error, and
          
An error is considered to have occurred when the
the Length field value is not equal to the portion
of the SIP L3PDU which extends from the
Destination Address field up to and including the
CRC32 field (if present) or up to and including
the PAD field (if the CRC32 field is not present).
As an optional check, an error is considered to
have occurred when the length of a partially
received SIP L3PDU exceeds the BAsize value.
          
- MRI Timeout Error.
          
An error is considered to have occurred when the
elapsed time between receipt of BOM and
corresponding EOM exceeds the value of the MRI
(Message Receive Interval) for a particular
transport signal format.
          
An entry is indexed by interface number and error
type, and contains Source Address, Destination
Address and a timestamp. All these errors are
counted in the sipL3Errors counter.  When
sipL3PDUErrorTimeStamp is equal to zero, the
SipL3PDUErrorEntry does not contain any valid
information.

sipL3PDUErrorEntry row .1.3.6.1.2.1.10.31.6.1.1

An entry in the service disagreement table.

Indexes

sipL3PDUErrorIndex sipL3PDUErrorType

Column	Syntax	OID
sipL3PDUErrorIndex The value of this object identifies the interface for which this entry contains management information.	IfIndex	.1.3.6.1.2.1.10.31.6.1.1.1
sipL3PDUErrorType The type of error.	Enumeration Enumerated Values: 1 erroredDAFieldFormat 2 erroredSAFieldFormat 3 invalidBAsizeFieldValue 4 invalidHdrExtLength 5 invalidHdrExtElementLength 6 invalidHdrExtVersionElementPositionLenthOrValue 7 invalidHdrExtCarSelectElementPositionLenghtValueOrFormat 8 hePADError 9 beTagMismatch 10 baSizeFieldNotEqualToLengthField 11 incorrectLength 12 mriTimeout	.1.3.6.1.2.1.10.31.6.1.1.2
sipL3PDUErrorSA A rejected SMDS source address.	SMDSAddress Type Constraints: range: 8	.1.3.6.1.2.1.10.31.6.1.1.3
sipL3PDUErrorDA A rejected SMDS destination address.	SMDSAddress Type Constraints: range: 8	.1.3.6.1.2.1.10.31.6.1.1.4
sipL3PDUErrorTimeStamp The timestamp for the service disagreement. The timestamp contains the value of sysUpTime at the latest occurrence of this type of service disagreement. See textual description under sipL3PDUErrorTable for boundary co…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.31.6.1.1.5

The DXI table.

sipDxiEntry row .1.3.6.1.2.1.36.1.1.1

An entry in the DXI table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
sipDxiCrc The value of this object indicates the type of Frame Checksum used by DXI. Current choices include CCITT CRC16 or CRC32.	Enumeration Enumerated Values: 1 crc16 2 crc32	.1.3.6.1.2.1.36.1.1.1.1
sipDxiOutDiscards The number of outbound frames discarded because of congestion.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.36.1.1.1.2
sipDxiInErrors The number of inbound frames discarded because of errors such as frame checksum (CRC) violations, non-integral number of octets, address and control field violations, and frame size errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.36.1.1.1.3
sipDxiInAborts The number of inbound frames discarded because of an abort bit sequence (1111111) received before closing flag.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.36.1.1.1.4
sipDxiInTestFrames The number of unerrored, inbound Test frames received (generally as part of Heart Beat Poll procedure).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.36.1.1.1.5
sipDxiOutTestFrames The number of unerrored, outbound Test frames sent (generally as part of Heart Beat Poll procedure).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.36.1.1.1.6
sipDxiHbpNoAcks The number of Heart Beat Poll (HBP) No Ack timeouts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.36.1.1.1.7