SHELF-MIB Table View

List of led in equipment.

ledEntry row .1.3.6.1.4.1.1038.150.2.2.1

A particular led of the equipment.

Indexes

ledIndex

Column	Syntax	OID
ledIndex A unique value which identify a particular led.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.2.2.1.1
ledPosition A reference to the associated Board on the equipment.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.2.2.1.2
ledType Type of the Led.	LedType Type Values: 1 status1 2 status2 3 online 4 traffic 5 major 6 minor 7 ether 8 halfFull	.1.3.6.1.4.1.1038.150.2.2.1.3
ledStatus Status of this Led.	LedStatus Type Values: 1 unknown 2 green 3 yellow 4 orange 5 red	.1.3.6.1.4.1.1038.150.2.2.1.4

List of board in equipment.

boardEntry row .1.3.6.1.4.1.1038.150.20.2.1

A particular board of the equipment.

Indexes

boardIndex

Column	Syntax	OID
boardIndex A unique value which identify a particular slot. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to hardware. Each equipment maintain its own pool of values: ex ADR15…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.20.2.1.1
boardSlotName A DisplayString which identify the name of a particular slot. Its value is fixed at equipment design time. It is usualy related to hardware ex ADR155c : A, B, ... Fan ex ADR2500c: Fan, CCU, CTRL, PSU1, ... TRIB5, .... …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.20.2.1.2
boardExpectType A value which configure the expected type. If used, this one must be equal to one of existent boardListIndex for the considerated board. Otherwise, the value is set to 0. Known types are readable in boardListTable	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.20.2.1.3
boardInsertType When the inserted board doesn't match with the expexted board the boardMismatch failure is generated. The type of the card could be found in hardware inventory.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.20.2.1.4
boardExpectFamily Board Family corresponding to the specified expected kind. This value is send by the equipment. ex ADR155c : ex ADR2500c : CTRL, FAN, AUX, CCU, PSU, STM1 OPT, STM1 ERE, STM4 OPT, STM16 OPT, GBETH, SWITCH	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.20.2.1.5
boardInsertFamily Board Family corresponding to the type of inserted board. ex ADR155c : ex ADR2500c : CTRL, FAN, AUX, CCU, PSU, STM1 OPT, STM1 ERE, STM4 OPT, STM16 OPT, GBETH, SWITCH	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.20.2.1.6
boardActive When the value of this field is set to false, the transmission of this board stop and the board could properly be extracted	EQUIPMENT-MIBSagemBooleanr/w Type Values: 1 true 2 false	.1.3.6.1.4.1.1038.150.20.2.1.7
boardFirstPortIndex If the card is a card with physical ports, then the value is the first index of a physical interface (SPI, PPI) in the mib SDH-ETS. Else, the value is 0.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.20.2.1.8
boardProtectionType The value of this field indicates the kind of wanted card protection. The default value is NONE. if value is changed in cardP(1)then an entry is created in cardpTable. But this table has to be completed (by setting the …	ProtectionTyper/w Type Values: 0 none 1 cardp	.1.3.6.1.4.1.1038.150.20.2.1.9
boardMonitor When the value of this field is set to false, the failure detection is stopped for this board.	EQUIPMENT-MIBSagemBooleanr/w Type Values: 1 true 2 false	.1.3.6.1.4.1.1038.150.20.2.1.10
boardFailure Active failures on board	BoardFailure Type Values: 0 none 1 missing 2 mismatch 3 defective	.1.3.6.1.4.1.1038.150.20.2.1.11
boardSeverity A reference to failure severity for boards.	EQUIPMENT-MIBSeverity Type Values: 1 nonAlarmed 2 minor 3 major 4 critical 5 warning 6 invNonAlarmed 7 invMinor 8 invMajor 9 invCritical 10 invWarning	.1.3.6.1.4.1.1038.150.20.2.1.12
boardMissingSev A reference to failure severity for boards.	EQUIPMENT-MIBSeverityr/w Type Values: 1 nonAlarmed 2 minor 3 major 4 critical 5 warning 6 invNonAlarmed 7 invMinor 8 invMajor 9 invCritical 10 invWarning	.1.3.6.1.4.1.1038.150.20.2.1.13
boardMismatchSev A reference to failure severity for boards.	EQUIPMENT-MIBSeverityr/w Type Values: 1 nonAlarmed 2 minor 3 major 4 critical 5 warning 6 invNonAlarmed 7 invMinor 8 invMajor 9 invCritical 10 invWarning	.1.3.6.1.4.1.1038.150.20.2.1.14
boardDefectiveSev A reference to failure severity for boards.	EQUIPMENT-MIBSeverityr/w Type Values: 1 nonAlarmed 2 minor 3 major 4 critical 5 warning 6 invNonAlarmed 7 invMinor 8 invMajor 9 invCritical 10 invWarning	.1.3.6.1.4.1.1038.150.20.2.1.15

List of board type able to be managed by this equipment .
In order to manage a new type, just insert the board and if
the family match with a known family, this table will be
expand automaticaly with the new type inserted
          
The XX fist value defined ( with boardSlotName = Shelf = 18 for ADR2500c)
is a list all possible type of boardInsertedType.

boardListEntry row .1.3.6.1.4.1.1038.150.30.2.1

A particular boardList of the equipment.

Indexes

boardListIndex

Column	Syntax	OID
boardListIndex A unique value.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.30.2.1.1
boardListSlot A reference to the corresponding Slot.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.30.2.1.2
boardListType In order to manage a new type, just insert the board and if the family match with a known family, this table will be expand automaticaly with the new type inserted. ex ADR155c : ex ADR2500c: 4S1.1, S4.1, L16.2, SWITCH, …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.30.2.1.3

List of software inventory used

softInventoryEntry row .1.3.6.1.4.1.1038.150.40.2.1

A particular boardList of the equipment.

Indexes

softInventoryIndex

Column	Syntax	OID
softInventoryIndex A unique value.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.40.2.1.1
softInventoryBoard A reference to the corresponding Slot. This variable is needed because some boards have their owns Applicative and Boot codes.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.40.2.1.2
softInventoryType Indication of type software	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.40.2.1.3
softInventoryCode Indication of version code	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.40.2.1.4
softInventoryExt Indication of extension code. This one is not mandatory.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.40.2.1.5

List of hardware inventory in equipment. 
A hardware inventory is a description associed to a 
particular card

hardInventoryEntry row .1.3.6.1.4.1.1038.150.50.2.1

A particular tInv of the equipment.

Indexes

hardInventoryIndex

Column	Syntax	OID
hardInventoryIndex Index of the inventory entry that corresponds to a particular slot	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.50.2.1.1
hardInventoryBoard Family of card inserted in the slot	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.50.2.1.2
hardInventoryDescr The content of the inventory: a textual description	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.50.2.1.3

List of synchronous physical interface in equipment.

laserEntry row .1.3.6.1.4.1.1038.150.100.2.1

A particular synchronous physical interface of the equipment.

Indexes

laserIndex

Column	Syntax	OID
laserIndex	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.100.2.1.1
laserTxEnable Enable(true) or disable(false) the laser output of the interface.	EQUIPMENT-MIBSagemBooleanr/w Type Values: 1 true 2 false	.1.3.6.1.4.1.1038.150.100.2.1.2
laserALSEnable Automatic Laser Shutdown enable(true) or disable(false). When enabled, this function cuts the laser output when a los is detected on input signal.	EQUIPMENT-MIBSagemBooleanr/w Type Values: 1 true 2 false	.1.3.6.1.4.1.1038.150.100.2.1.3
laserALSRestart2s Operator command to start a one shot emission during 2s.	EQUIPMENT-MIBSagemBooleanr/w Type Values: 1 true 2 false	.1.3.6.1.4.1.1038.150.100.2.1.4
laserALSRestart90s Operator command to start a one shot emission during 90s.	EQUIPMENT-MIBSagemBooleanr/w Type Values: 1 true 2 false	.1.3.6.1.4.1.1038.150.100.2.1.5

List of EOW port in equipment.

eowEntry row .1.3.6.1.4.1.1038.150.120.2.1

A particular EOW port of the equipment.

Indexes

eowIndex

Column	Syntax	OID
eowIndex A unique value which identify a particular EOW port. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.120.2.1.1
eowName A text string which identifies the particular entry among the EOW port entries.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1038.150.120.2.1.2
eowSrcType A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection.	EOWTyper/w Type Values: 1 rsE1 2 rsF1 3 rsOther 4 msE2 5 aux	.1.3.6.1.4.1.1038.150.120.2.1.6
eowSrcPtr A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.120.2.1.7
eowSinkType A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection.	EOWTyper/w Type Values: 1 rsE1 2 rsF1 3 rsOther 4 msE2 5 aux	.1.3.6.1.4.1.1038.150.120.2.1.8
eowSinkPtr A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1038.150.120.2.1.9
eowClockMode Select the direction of the two external synchronisation lines.	EOWClockModer/w Type Values: 0 codirectionnal 1 contradirSlave 2 contradirMaster	.1.3.6.1.4.1.1038.150.120.2.1.10