SCTP-MIB
The MIB module for managing SCTP implementations.
Copyright (C) The Internet Society (2004). This version of
this MIB module is part of RFC 3873; see the RFC itself for
full legal notices.
- Source file
SCTP-MIB- Last revised
- Identity
sctpMIB- Base OID
1.3.6.1.2.1.104
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'SCTP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SCTP-MIB::sctpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCTP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCTP-MIB::sctpMIB'
Objects (81)
Showing 81 of 81 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.104 |
||
.1.3.6.1.2.1.104.1 |
||
.1.3.6.1.2.1.104.1.1 |
||
.1.3.6.1.2.1.104.1.1.1 |
||
.1.3.6.1.2.1.104.1.1.10 |
||
.1.3.6.1.2.1.104.1.1.11 |
||
.1.3.6.1.2.1.104.1.1.12 |
||
.1.3.6.1.2.1.104.1.1.13 |
||
.1.3.6.1.2.1.104.1.1.14 |
||
.1.3.6.1.2.1.104.1.1.15 |
||
.1.3.6.1.2.1.104.1.1.16 |
||
.1.3.6.1.2.1.104.1.1.17 |
||
.1.3.6.1.2.1.104.1.1.18 |
||
.1.3.6.1.2.1.104.1.1.2 |
||
.1.3.6.1.2.1.104.1.1.3 |
||
.1.3.6.1.2.1.104.1.1.4 |
||
.1.3.6.1.2.1.104.1.1.5 |
||
.1.3.6.1.2.1.104.1.1.6 |
||
.1.3.6.1.2.1.104.1.1.7 |
||
.1.3.6.1.2.1.104.1.1.8 |
||
.1.3.6.1.2.1.104.1.1.9 |
||
.1.3.6.1.2.1.104.1.10 |
||
.1.3.6.1.2.1.104.1.10.1 |
||
.1.3.6.1.2.1.104.1.10.1.1 |
||
.1.3.6.1.2.1.104.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.104.1.2.1 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.104.1.2.2 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.104.1.2.3 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.104.1.2.4 |
|
|
Integer32
|
.1.3.6.1.2.1.104.1.2.5 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.104.1.2.6 |
|
.1.3.6.1.2.1.104.1.2.7 |
||
.1.3.6.1.2.1.104.1.3 |
||
.1.3.6.1.2.1.104.1.3.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.104.1.3.1.1 |
|
|
Unsigned32
|
.1.3.6.1.2.1.104.1.3.1.10 |
|
.1.3.6.1.2.1.104.1.3.1.11 |
||
.1.3.6.1.2.1.104.1.3.1.12 |
||
.1.3.6.1.2.1.104.1.3.1.13 |
||
.1.3.6.1.2.1.104.1.3.1.14 |
||
.1.3.6.1.2.1.104.1.3.1.15 |
||
.1.3.6.1.2.1.104.1.3.1.16 |
||
.1.3.6.1.2.1.104.1.3.1.17 |
||
|
OctetString
|
.1.3.6.1.2.1.104.1.3.1.2 |
|
|
Unsigned32
|
.1.3.6.1.2.1.104.1.3.1.3 |
|
|
Unsigned32
|
.1.3.6.1.2.1.104.1.3.1.4 |
|
.1.3.6.1.2.1.104.1.3.1.5 |
||
.1.3.6.1.2.1.104.1.3.1.6 |
||
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.104.1.3.1.7 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.104.1.3.1.8 |
|
Unsigned32
|
.1.3.6.1.2.1.104.1.3.1.9 |
|
.1.3.6.1.2.1.104.1.4 |
||
.1.3.6.1.2.1.104.1.4.1 |
||
.1.3.6.1.2.1.104.1.4.1.1 |
||
.1.3.6.1.2.1.104.1.4.1.2 |
||
.1.3.6.1.2.1.104.1.4.1.3 |
||
.1.3.6.1.2.1.104.1.5 |
||
.1.3.6.1.2.1.104.1.5.1 |
||
.1.3.6.1.2.1.104.1.5.1.1 |
||
.1.3.6.1.2.1.104.1.5.1.2 |
||
.1.3.6.1.2.1.104.1.5.1.3 |
||
.1.3.6.1.2.1.104.1.5.1.4 |
||
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.104.1.5.1.5 |
|
.1.3.6.1.2.1.104.1.5.1.6 |
||
.1.3.6.1.2.1.104.1.5.1.7 |
||
.1.3.6.1.2.1.104.1.5.1.8 |
||
.1.3.6.1.2.1.104.1.6 |
||
.1.3.6.1.2.1.104.1.6.1 |
||
.1.3.6.1.2.1.104.1.6.1.1 |
||
.1.3.6.1.2.1.104.1.7 |
||
.1.3.6.1.2.1.104.1.7.1 |
||
.1.3.6.1.2.1.104.1.7.1.1 |
||
.1.3.6.1.2.1.104.1.8 |
||
.1.3.6.1.2.1.104.1.8.1 |
||
.1.3.6.1.2.1.104.1.8.1.1 |
||
.1.3.6.1.2.1.104.1.9 |
||
.1.3.6.1.2.1.104.1.9.1 |
||
.1.3.6.1.2.1.104.1.9.1.1 |
||
.1.3.6.1.2.1.104.2 |
||
.1.3.6.1.2.1.104.2.1 |
||
.1.3.6.1.2.1.104.2.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- SCTP-MIBrfcselected
Conformance Groups (5)
Compliance Statements (1)
OID
.1.3.6.1.2.1.104.2.1.1The compliance statement for SNMP entities which implement
this SCTP MIB Module.
There are a number of INDEX objects that cannot be represented
in the form of OBJECT clauses in SMIv2, but for which we have
the following compliance requirements, expressed in OBJECT
clause form in this description clause:
-- OBJECT sctpAssocLocalAddrType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- It is only required to have IPv4 and IPv6 addresses without
-- zone indices.
-- The address with zone indices is required if an
-- implementation can connect multiple zones.
--
-- OBJECT sctpAssocLocalAddr
-- SYNTAX InetAddress (SIZE(4|16))
-- DESCRIPTION
-- An implementation is only required to support globally
-- unique IPv4 and IPv6 addresses.
--
-- OBJECT sctpAssocRemAddrType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- It is only required to have IPv4 and IPv6 addresses without
-- zone indices.
-- The address with zone indices is required if an
-- implementation can connect multiple zones.
--
-- OBJECT sctpAssocRemAddr
-- SYNTAX InetAddress (SIZE(4|16))
-- DESCRIPTION
-- An implementation is only required to support globally
-- unique IPv4 and IPv6 addresses.
--
this SCTP MIB Module.
There are a number of INDEX objects that cannot be represented
in the form of OBJECT clauses in SMIv2, but for which we have
the following compliance requirements, expressed in OBJECT
clause form in this description clause:
-- OBJECT sctpAssocLocalAddrType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- It is only required to have IPv4 and IPv6 addresses without
-- zone indices.
-- The address with zone indices is required if an
-- implementation can connect multiple zones.
--
-- OBJECT sctpAssocLocalAddr
-- SYNTAX InetAddress (SIZE(4|16))
-- DESCRIPTION
-- An implementation is only required to support globally
-- unique IPv4 and IPv6 addresses.
--
-- OBJECT sctpAssocRemAddrType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- It is only required to have IPv4 and IPv6 addresses without
-- zone indices.
-- The address with zone indices is required if an
-- implementation can connect multiple zones.
--
-- OBJECT sctpAssocRemAddr
-- SYNTAX InetAddress (SIZE(4|16))
-- DESCRIPTION
-- An implementation is only required to support globally
-- unique IPv4 and IPv6 addresses.
--
Required groups
| mandatory | sctpLayerParamsGroup | |
| mandatory | sctpPerAssocParamsGroup | |
| mandatory | sctpStatsGroup | |
| mandatory | sctpPerAssocStatsGroup | |
| optional | sctpInverseGroup |
Objects used in inverse lookup tables. This should be implemented, at the discretion of the implementers, for easier lookups in the association tables |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| sctpAssocRemPrimAddrType |
ipv4(1), ipv6(2)
|
It is only required to have IPv4 and IPv6 addresses without zone indices. The address with zone indices is required if an implementation can connect multiple zones. |
|
| sctpAssocRemPrimAddr | An implementation is only required to support globally unique IPv4 and globally unique IPv6 addresses. |
||
| sctpAssocState | readonly | Only the deleteTCB(9) value MAY be set by a management station at most. A read-only option is also considered to be compliant with this MIB module description. |