SCTE-HMS-HE-OPTICAL-AMPLIFIER-MIB Table View

A table containing information about headend (or indoor)
fiber optic amplifiers. These amplifiers could be plug-in
modules for a chassis, stand-alone pizza-box units etc.

heOpAmpUnitEntry row .1.3.6.1.4.1.5591.1.11.1.3.1.1.1.1

Information about each Fiber Optic amplifier in
the subsystem.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
heOpAmpUnitOutputStatus The output status of the amplifier. If all the outputs of the amplifier are off then the variable value shall be off(1), else the value shall be on(2). This object must provide for the alar…	SCTE-HMS-HEADENDIDENT-MIBHeOnOffStatus Type Values: 1 off 2 on	.1.3.6.1.4.1.5591.1.11.1.3.1.1.1.1.1
heOpAmpUnitOnOffControl This variable controls the output status of the amplifer. Setting this variable to off(1) will cause all the amplifier outputs to be shut off. Setting this variable to on(2) will cause a…	SCTE-HMS-HEADENDIDENT-MIBHeOnOffControlr/w Type Values: 1 off 2 on 3 meaningless	.1.3.6.1.4.1.5591.1.11.1.3.1.1.1.1.2

A table containing information related to input Parameters
in headend (or indoor) fiber optic amplifiers. These 
amplifiers could be plug-in modules for a chassis, 
stand-alone pizza-box units etc.

heOpAmpInputEntry row .1.3.6.1.4.1.5591.1.11.1.3.1.1.2.1

Information about each Fiber Optic amplifier input in
the subsystem.

Indexes

ENTITY-MIBentPhysicalIndex heOpAmpInputIndex

Column	Syntax	OID
heOpAmpInputIndex An arbitrary value which uniquely identifies the amplifier input.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5591.1.11.1.3.1.1.2.1.1
heOpAmpInputPower Optical input power. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB (HMS026). An alarm shall be recorded as an entr…	0.1 dBmSCTE-HMS-HEADENDIDENT-MIBHeTenthdBm	.1.3.6.1.4.1.5591.1.11.1.3.1.1.2.1.2

A table containing information about amplifier laser(s).

heOpAmpLaserEntry row .1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1

A list of information about each laser in
the particular amplifier.

Indexes

ENTITY-MIBentPhysicalIndex heOpAmpLaserIndex

Column	Syntax	OID
heOpAmpLaserIndex An arbitrary value which uniquely identifies the laser.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.1
heOpAmpLaserTemp Temperature of the amplifier laser. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB (HMS026). An alar…	0.1 degrees CelsiusSCTE-HMS-HEADENDIDENT-MIBHeTenthCentigrade	.1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.2
heOpAmpLaserBiasCurrent Amplifier laser bias current in mA. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB (HMS026). An alar…	1.0 mASCTE-HMS-HEADENDIDENT-MIBHeMilliAmp	.1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.3
heOpAmpLaserOutputPower The laser output power. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB (HMS026). An alarm shall be r…	0.1 dBmSCTE-HMS-HEADENDIDENT-MIBHeTenthdBm	.1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.4
heOpAmpLaserTECCurrent Laser Thermo Electric Cooler current. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB (HMS026). An alarm shall be re…	1.0 mASCTE-HMS-HEADENDIDENT-MIBHeMilliAmp	.1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.5
heOpAmpLaserType Laser type.	SCTE-HMS-HEADENDIDENT-MIBHeLaserType	.1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.6

A table containing information about amplifier's outputs.

heOpAmpOutputEntry row .1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1

A list of information about each output in
the particular amplifier.

Indexes

ENTITY-MIBentPhysicalIndex heOpAmpOutputIndex

Column	Syntax	OID
heOpAmpOutputIndex An arbitrary value which uniquely identifies the output.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.1
heOpAmpSetOpticalOutputPower Set Amplifier Optical Output Power. The setting of this value has no effect unless the heOpAmpOutputGainType is set to constantPower(1)	0.1 dBmSCTE-HMS-HEADENDIDENT-MIBHeTenthdBmr/w	.1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.2
heOpAmpGainPerWavelength Controls constant gain per wavelength. The setting of this value has no effect unless the heOpAmpOutputGainType is set to constantGain(2)	0.1 dBmSCTE-HMS-HEADENDIDENT-MIBHeTenthdBr/w	.1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.3
heOpAmpOutputPower The output power. This could be the power from a single output or the output power from each of multiple outputs. This object must provide for the alarm management capabilities with a corresponding entry …	0.1 dBmSCTE-HMS-HEADENDIDENT-MIBHeTenthdBm	.1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.4
heOpAmpOutputGainType Controls the output gain type, which is either constant power or constant gain. When constantGain is selected, the value of heOpAmpGainPerWavelength is used to control the output of the amplifier and heOpAmpSetOpticalOu…	Enumerationr/w Enumerated Values: 1 constantPower 2 constantGain	.1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.5