SCHLEIFENBAUER-GENERIC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
21
Rows
21
Columns
264

deviceIdentificationTable

table
.1.3.6.1.4.1.44568.1.1.2.1 · 1 row entry · 19 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceIdentificationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceIdentificationTable' 
General identification parameters.
deviceIdentificationEntry row .1.3.6.1.4.1.44568.1.1.2.1.1
General identification parameters.
Indexes
Column Syntax OID
identificationDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.2.1.1.1
idDeviceName
User configurable device name or identifier.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.2
idDeviceLocation
User configurable device location identifier.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.3
idModuleType
Device category: 0 = Daisychain Module, 1 = Gateway Module, 2 = Controller Module (SF also uses -1 to meaning no module!)
Enumeration
Enumerated Values:
0daisychain-module
1gateway-module
2controller-module
 .1.3.6.1.4.1.44568.1.1.2.1.1.4
idProduct
Product id
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.2.1.1.5
idModuleFirmware
Firmware version number.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.2.1.1.6
idMacAddress
MAC address.
OctetString
Constraints:
range: 0-18
 .1.3.6.1.4.1.44568.1.1.2.1.1.7
idBirthday
Date Of Manufacture (DOM)
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.2.1.1.8
idModuleSerialNumber
Module serial number
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.2.1.1.9
idModulePartNo
Module part number.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.2.1.1.10
idSalesOrderNumber
Sales order number
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.2.1.1.11
idSerialNumber
Serial number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.2.1.1.12
idExtraTag
The device extra info
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.13
idState
The device state info as string
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.14
idVendor
The device vendor name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.15
idId
The device unique identifier
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.16
idIpAddr
The device IP Addr
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.44568.1.1.2.1.1.17
idType
The device type. e.g. PDU, UPS, etc
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.18
idLastError
The last error message
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.2.1.1.19

deviceConfigTable

table
.1.3.6.1.4.1.44568.1.1.3.1 · 1 row entry · 13 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceConfigTable' 
A list to display device configuration.
deviceConfigEntry row .1.3.6.1.4.1.44568.1.1.3.1.1
A list to display device configuration.
Indexes
Column Syntax OID
configDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.1
configMaximumLoad
Maximum rated load of the device per phase (this value is also mentioned on the PDU profile), usually either 16A, 32A or 63A.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.2
configCustomerName
Custom 64 character name field for the customer.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.3.1.1.3
configFormFactor
Formfactor of the device.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.3.1.1.4
configLength
Length of the device in millimeter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.5
configNoBranches
The number of branches available in the PDU, can be zero if no branches are available in the configuration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.6
configNrOutlMeasured
Number of measured outlets available in the PDU. If numbering of outlets used is non-contiguous: the highest outlet number is assumed as amount of measured outlets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.7
configNoNeutral
Use neutral current measurements if available: 0 = No neutral current measurement, 1 = Use neutral current measurement.
Enumeration
Enumerated Values:
0no-neutral-current-measurement
1use-neutral-current-measurement
 .1.3.6.1.4.1.44568.1.1.3.1.1.8
configNrOutletsTotal
Total number of outlets available in the PDU, including hardwired outlets without a switchmeasure module.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.9
configNrPhases
Total number of inputs: either zero (for no input metering), one or three for a single or three phase system.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.10
configNrOutlSwitched
Total number of switched outlets available. If the numbering of outlets used is non-contiguous: the highest outlet number is assumed as amount of switched outlets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.11
configNoTotals
The number of total calculations available in the PDU, this is usually one but can be more.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.3.1.1.12
configVoltRating
Voltage rating in V for this PDU.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.44568.1.1.3.1.1.13

deviceSettingsTable

table
.1.3.6.1.4.1.44568.1.1.4.1 · 1 row entry · 9 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceSettingsTable' 
device e.g. PDU settings.
deviceSettingsEntry row .1.3.6.1.4.1.44568.1.1.4.1.1
device e.g. PDU configuration.
Indexes
Column Syntax OID
settingsDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.4.1.1.1
setCurrentDropDetection
Enable or disable current drop detection (0 = disabled, 1 = enabled)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.44568.1.1.4.1.1.2
setFixedOutletDelay
Minimal delay between relay switch requests in milliseconds. The minimum delay is 100ms.
100SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.4.1.1.3
setHighlight
Locate a unit. Set to '1' to switch on and to '0' to switch off this function.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.44568.1.1.4.1.1.4
setLedBrightness
LED brightness setting for the light ring of a PDU
0.01%SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.4.1.1.5
setDisableOutletSwitching
Setting this will disable all means of switching an outlet; only the powerup modes and delays will be respected (0 = disabled, 1 = enabled).
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.44568.1.1.4.1.1.6
setOutletPowerupMode
Behaviour of outlets on power-up. 0 = off, 1 = same state as at power down use default switch delay, 2 = same state, but delayed by individual delay timer, 3 = Outlets will always stay on (even at power down!)
Enumerationr/w
Enumerated Values:
0no-switching-on-powerup
1system-wide-outlet-delay
2system-wide-and-individual-outlet-delay
3no-switching-on-power-down
 .1.3.6.1.4.1.44568.1.1.4.1.1.7
setSensorChangeAlertMode
Enables the sensor channel change detection. 0 = off (default), 1 = on
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.44568.1.1.4.1.1.8
setConfigUsbMode
USB Mode. 0 = Disabled, 1 = Enabled
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.44568.1.1.4.1.1.9

deviceDaisychainTable

table
.1.3.6.1.4.1.44568.1.1.5.1 · 1 row entry · 5 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceDaisychainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceDaisychainTable' 
device e.g. daisychain values.
deviceDaisychainEntry row .1.3.6.1.4.1.44568.1.1.5.1.1
device e.g. PDU configuration.
Indexes
Column Syntax OID
daisychainDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.5.1.1.1
dChainBreakLocation
Device index of the ring break location. Can be used to determine between which devices the ring is broken.
1SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.5.1.1.2
dChainBusStatus
SPBUS network architecture configuration. 0 = open ring network, 1 = closed ring network
1Enumeration
Enumerated Values:
0open
1closed
 .1.3.6.1.4.1.44568.1.1.5.1.1.3
dChainNrUnitsFound
Result of scan command, denotes the number of devices on the SPBUS network.
1SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.5.1.1.4
dChainUnitList
List of unit addresses known to the device. Position ordered list of assigned unit addresses.
1OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.44568.1.1.5.1.1.5

deviceResetTable

table
.1.3.6.1.4.1.44568.1.1.6.1 · 1 row entry · 2 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceResetTable' 
device e.g. PDU reset values.
deviceResetEntry row .1.3.6.1.4.1.44568.1.1.6.1.1
device e.g. PDU configuration.
Indexes
Column Syntax OID
resetDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.6.1.1.1
resetRestart
Writing '1' to this register will invoke a warm restart of the device. Note that this will have no effect on outlet status!
1Enumerationr/w
Enumerated Values:
1restart
 .1.3.6.1.4.1.44568.1.1.6.1.1.2

deviceInputsTable

table
.1.3.6.1.4.1.44568.1.1.7.1 · 1 row entry · 22 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceInputsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceInputsTable' 
A list to display status of Input.
deviceInputsEntry row .1.3.6.1.4.1.44568.1.1.7.1.1
A list to display status of Input.
Indexes
Column Syntax OID
inputDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.1
inputIndex
Index of inputs.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.7.1.1.2
inputName
User configurable 64 character naming of the inputs or phases.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.7.1.1.3
inputEnergyTotal
Either the only phase in a single phase measurement; or one of the three phases in a multiphase measurement. This value is not resetable.
KWhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.4
inputEnergySubtotal
kWh subtotal register of the only phase in a single phase measurement; or one of three phases in a multiphase measurement.
KWhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.5
inputActivePower
Input power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of a phase.
0.01WSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.6
inputApparentPower
Input VA (volt-amps, in VA) 100x, MEASURED by the device using current and voltage measurements of a phase.
0.01VASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.7
inputReactivePower
Reactive power (volt-amps reactive, in VAR) 100x, MEASURED by the device.
0.01VARSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.8
inputPowerFactor
The effective power factor for each input 100x.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.9
inputActualCurrent
Actual apparent, RMS current of an input 100x.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.10
inputActualVoltage
The actual voltage per input 100x.
0.01VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.11
inputFrequency
Frequency in Hz per input 100x.
0.01HzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.12
inputApparentEnergy
The apparent accumulated energy VAh of each phase 100x.
5645VAhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.13
inputCrestFactor
The crest factor per input 100x. the ratio of peak values to the effective value.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.14
inputPeakCurrent
Input peak apparent 100x, RMS current; highest value since last reset of the peaks.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.15
inputMaxRatedAmps
Maximum rated current in A per input.
1ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.16
inputThd
Total harmonic distortion in percent per phase 100x.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.17
inputType
Type of input.
1SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.18
inputMinVoltage
RMS voltage dip; lowest value since reset of dips.
0.01VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.19
inputMaxVoltage
RMS voltage peak; highest value since reset of peaks.
0.01VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.20
inputPhase
A mapping to which phase each input is connected to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.21
inputStatusUnbalanced
The input unbalanced. 100x.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.7.1.1.22

deviceOutletsTable

table
.1.3.6.1.4.1.44568.1.1.8.1 · 1 row entry · 23 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceOutletsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceOutletsTable' 
A list to display status of Outlet.
deviceOutletsEntry row .1.3.6.1.4.1.44568.1.1.8.1.1
A list to display status of Outlet.
Indexes
Column Syntax OID
outletDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.1
outletIndex
An outlet index in pdu.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.8.1.1.2
outletName
User configurable naming of individual outlets.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.8.1.1.3
outletEnergyTotal
Total kWh of selected outlet. This value is not resetable.
KWhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.4
outletEnergySubtotal
kWh subtotal register of selected output.
KWhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.5
outletActivePower
Output power (in W), MEASURED by the device x100 using current, voltage, and power factor measurements of an outlet.
0.01WSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.6
outletApparentPower
Output VA (volt-amps, in VA) 100x, MEASURED by the device using current and voltage measurements of an outlet.
0.01VASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.7
outletReactivePower
Reactive power (volt-amps reactive, in VAR) 100x, MEASURED by the device.
0.01VARSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.8
outletPowerFactor
Power factor x100 per outlet.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.9
outletActualCurrent
Actual apparent 100x, RMS current per outlet.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.10
outletActualVoltage
Actual voltage on outlet 100x.
0.01VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.11
outletType
Outlet types: 0: Unknown, 1: BS, 2: C13, 3: C13 IEC Lock, 4: C19, 5: C19 IEC Lock, 6: CEE 16A 1 phase, 7: CEE 16A 3 phase, 8: CEE 32A 1 phase, 9: CEE 32A 3 phase, 10: CEE 63A 1 phase, 11: CEE 63A 3 phase, 12: COMBI IEC …
1Enumeration
Enumerated Values:
0unknown
1bs
2c13
3c13-iec-lock
4c19
5c19-iec-lock
6cee-16a-1phase
7cee-16a-3phase
8cee-32a-1phase
9cee-32a-3phase
10cee-64a-1phase
11cee-64a-3phase
12combi-iec-lock
13gst-155
14gst-183
15gst-185
16schuko
17t13
18t23
19ute
 .1.3.6.1.4.1.44568.1.1.8.1.1.12
outletPhase
A mapping to which input each outlet is connected to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.13
outletCurrentState
The state of the outlet relay(s).
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.44568.1.1.8.1.1.14
outletApparentEnergy
The apparent accumulated energy VAh of each outlet 100x.
5645VAhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.15
outletCrestFactor
The crest factor per outlet 100x. the ratio of peak values to the effective value.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.16
outletPeakCurrent
Peak apparent 100x, RMS current of an outlet; highest value since last reset of the peaks.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.17
outletMaxRatedAmps
Outlet maximum rated current in A.
1ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.18
outletThd
Total harmonic distortion per outlet 100x.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.19
outletPowerCycle
Writing '1' will cause the outlet to power cycle.
1SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.20
outletPowerCycleDelay
Outlet individual power cycle timer. This is the amount, in seconds.
1SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.21
outletSwitchDelay
Delay before an individual outlet's relay switches on at power-up, in seconds.
1SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.22
outletBranch
A mapping to which branch each outlet is connected to.
1SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.8.1.1.23

deviceBranchesTable

table
.1.3.6.1.4.1.44568.1.1.9.1 · 1 row entry · 22 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceBranchesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceBranchesTable' 
A list to display status of Branch.
deviceBranchesEntry row .1.3.6.1.4.1.44568.1.1.9.1.1
A list to display status of Outlet.
Indexes
Column Syntax OID
branchDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.1
branchIndex
A branch index in pdu.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.9.1.1.2
branchName
User configurable naming of a branch in 64 characters per branch.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.9.1.1.3
branchEnergyTotal
Branch energy total measurement in kWh. This value is not resetable. 24-bit little-endian integer.
KWhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.4
branchEnergySubtotal
Branch energy subtotal measurement in kWh. Reset to zero with [rsbmks]. 24-bit little-endian integer.
KWhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.5
branchActivePower
Branch power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of an branch.
0.01WSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.6
branchApparentPower
Branch VA (volt-amps) 100x, MEASURED by the device using current and voltage measurements of an branch.
0.01VASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.7
branchReactivePower
Reactive power (volt-amps reactive, in VAR) of a branch x100, MEASURED by the device.
0.01VARSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.8
branchPowerFactor
The effective power factor per branch 100x.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.9
branchActualCurrent
Actual apparent 100x, RMS current of a branch.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.10
branchActualVoltage
The actual voltage per branch x100.
0.01VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.11
branchType
Breaker type: 0: Unknown, 1: ETA (thermal, resettable), 2: HYMA (hydraulic magnetic), 3: MCB (thermal magnetic DIN), 4: MELT (small ceramic fuse), 5: REVOLVER (large ceramic fuse, DIN holder).
1Enumeration
Enumerated Values:
0unknown
1eta
2hyma
3mcb
4melt
5revolver
 .1.3.6.1.4.1.44568.1.1.9.1.1.12
branchPhase
A mapping to which phase (input) each branch is connected to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.13
branchState
Power state of the branch, usable for determining if a branch is currently tripped. 0 = OK, 1 = Tripped.
Enumeration
Enumerated Values:
0ok
1tripped
 .1.3.6.1.4.1.44568.1.1.9.1.1.14
branchApparentEnergy
The apparent accumulated energy VAh of each branch. 100x
5645VAhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.15
branchCrestFactor
The crest factor per branch 100x. the ratio of peak values to the effective value.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.16
branchPeakCurrent
Branch peak apparent 100x, RMS current; highest value since last reset of the peaks.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.17
branchMaxRatedAmps
Maximum rated current in A per branch (representing the breakerfuse value).
1ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.18
branchThd
Total harmonic distortion in percent per branch x100.
0.01%SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.19
branchMinVoltage
RMS voltage dip per branch; lowest value since reset of dips.
0.01VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.20
branchMaxVoltage
RMS voltage peak per branch; highest value since reset of peaks.
0.01VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.21
branchFrequency
Frequency in Hz per branch 100x.
0.01HzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.9.1.1.22

deviceTotalsTable

table
.1.3.6.1.4.1.44568.1.1.10.1 · 1 row entry · 16 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceTotalsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceTotalsTable' 
A list to display status of totals.
deviceTotalsEntry row .1.3.6.1.4.1.44568.1.1.10.1.1
A list to display status of totals.
Indexes
Column Syntax OID
totalDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.1
totalIndex
A total index in pdu.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.10.1.1.2
totalEnergy
Total energy measurement in kWh. This value is not resetable.
KWhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.3
totalActivePower
Totals power (in W) 100x, sum of phases.
0.01WSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.4
totalApparentPower
Totals VA (volt-amps, in VA) 100x, sum of phases.
0.01VASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.5
totalReactivePower
Totals reactive power (volt-amps reactive, in VAR) 100x, sum of phases.
0.01VARSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.6
totalActualCurrent
System total actual apparent 100x, RMS current.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.7
totalApparentEnergy
The total apparent energy in VAh 100x. This value is not resetable.
5645VAhSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.8
totalPeakCurrent
System total peak apparent 100x, RMS current; highest value since last reset of the peaks.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.9
totalNeutralPeak
Peak neutral current 100x.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.10
totalNeutralCurrent
Neutral current measurement 100x. This is the sum of the neutral measurents channels: (only in three phase configs, one channel for all except 63A, then there will be two).
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.11
totalOvervoltageProtect
Overvoltage protection module measurement (0 = OK, 1 = Overvoltage detected).
1Enumeration
Enumerated Values:
0ok
1overvoltage
 .1.3.6.1.4.1.44568.1.1.10.1.1.12
totalResidualAcCurrent
AC residual current measurement 100x.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.13
totalResidualPeak
Peak residual current 100x.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.14
totalResidualCurrent
Residual current measurement 100x.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.15
totalResidualDcCurrent
DC residual current measurement 100x.
0.01ASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.10.1.1.16

deviceSensorsTable

table
.1.3.6.1.4.1.44568.1.1.11.1 · 1 row entry · 9 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceSensorsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceSensorsTable' 
A list to display status of Sensors.
deviceSensorsEntry row .1.3.6.1.4.1.44568.1.1.11.1.1
A list to display status of Sensor.
Indexes
Column Syntax OID
sensorDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.11.1.1.1
sensorIndex
A port index in pdu.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.11.1.1.2
sensorName
The sensor port name.
OctetStringr/w
Constraints:
range: 0-36
 .1.3.6.1.4.1.44568.1.1.11.1.1.3
sensorValue
The sensor value 10x. E.g. a temperature of 25.7 C is passed as 257.
0.1SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.44568.1.1.11.1.1.4
sensorType
The sensor type string.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.11.1.1.5
sensorSerialNumber
Serial number of the sensor.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.44568.1.1.11.1.1.6
sensorSource
Source of the sensor.
Enumeration
Enumerated Values:
0internal
1usb1
2usb2
 .1.3.6.1.4.1.44568.1.1.11.1.1.7
sensorState
State of the sensor.
Enumeration
Enumerated Values:
0normal
1disconnected
2timeout
3configError
4genericError
 .1.3.6.1.4.1.44568.1.1.11.1.1.8
sensorUnit
Sensor measurement unit.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.11.1.1.9

deviceDigitalInputsTable

table
.1.3.6.1.4.1.44568.1.1.40.1 · 1 row entry · 7 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceDigitalInputsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceDigitalInputsTable' 
A list to display status of Digital Input.
deviceDigitalInputsEntry row .1.3.6.1.4.1.44568.1.1.40.1.1
A list to display status of Digital Input.
Indexes
Column Syntax OID
digitalInputDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.40.1.1.1
digitalInputIndex
A port index in pdu.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.40.1.1.2
digitalInputName
The digital input name.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.40.1.1.3
digitalInputSerialNumber
Serial number of the digital input.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.44568.1.1.40.1.1.6
digitalInputSource
Source of the digital input.
Enumeration
Enumerated Values:
0internal
1usb1
2usb2
 .1.3.6.1.4.1.44568.1.1.40.1.1.7
digitalInputState
State of the digital input.
Enumeration
Enumerated Values:
0normal
1disconnected
2timeout
3configError
4genericError
 .1.3.6.1.4.1.44568.1.1.40.1.1.8
digitalInputValue
The digital input state
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.44568.1.1.40.1.1.9

deviceDigitalOutputsTable

table
.1.3.6.1.4.1.44568.1.1.50.1 · 1 row entry · 7 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk deviceDigitalOutputsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::deviceDigitalOutputsTable' 
A list to display status of Digital Output.
deviceDigitalOutputsEntry row .1.3.6.1.4.1.44568.1.1.50.1.1
A list to display status of Digital Output.
Indexes
Column Syntax OID
digitalOutputDeviceIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.50.1.1.1
digitalOutputIndex
Digital Output index in pdu.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.50.1.1.2
digitalOutputName
The digital output port name.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.50.1.1.3
digitalOutputSerialNumber
Serial number of the digital output.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.44568.1.1.50.1.1.6
digitalOutputSource
Source of the digital output.
Enumeration
Enumerated Values:
0internal
1usb1
2usb2
 .1.3.6.1.4.1.44568.1.1.50.1.1.7
digitalOutputState
State of the digital output.
Enumeration
Enumerated Values:
0normal
1disconnected
2timeout
3configError
4genericError
 .1.3.6.1.4.1.44568.1.1.50.1.1.8
digitalOutputValue
The digital outlet switch state.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.44568.1.1.50.1.1.9

dcStatusTable

table
.1.3.6.1.4.1.44568.1.1.100.1 · 1 row entry · 16 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk dcStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::dcStatusTable' 
A list to display status of Data center.
dcStatusEntry row .1.3.6.1.4.1.44568.1.1.100.1.1
A list to display status of Data Center.
Indexes
Column Syntax OID
dcStatusIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.100.1.1.1
dcStatusName
The datacenter name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.100.1.1.2
dcStatusState
The datacenter state .e.g normal, etc.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.100.1.1.3
dcStatusKwhTotal
The data center KWhTotal.
KWhInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.4
dcStatusPowerWatts
The datacenter power Watt. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.5
dcStatusPowerVA
The daracenter power VA. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.6
dcStatusCurrent
The data center current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.7
dcStatusVoltage
The data center Voltage. 100x.
0.01VInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.8
dcStatusTemp
The temperature. 10x.
0.1CInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.9
dcStatusHumidity
The humidity. 10x.
0.1%Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.10
dcStatusRcmCurrent
The residual current in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.11
dcStatusRcmCurrentAc
The residual current AC component in mA
Integer32
Constraints:
range: 0-512
 .1.3.6.1.4.1.44568.1.1.100.1.1.12
dcStatusRcmCurrentDc
The residual current DC component in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.13
dcStatusL1
The data center L1current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.14
dcStatusL2
The data center L2 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.15
dcStatusL3
The data center L3 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.100.1.1.16

roomStatusTable

table
.1.3.6.1.4.1.44568.1.1.110.1 · 1 row entry · 17 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk roomStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::roomStatusTable' 
A list to display status of rooms.
roomStatusEntry row .1.3.6.1.4.1.44568.1.1.110.1.1
A list to display status of a room.
Indexes
Column Syntax OID
roomStatusIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.110.1.1.1
roomStatusName
The room name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.110.1.1.2
roomStatusState
The room statee.g. normal, degraded
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.110.1.1.3
roomDcStatusName
The datacenter name in which this room is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.110.1.1.4
roomStatusKwhTotal
The room KWhTotal.
KWhInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.5
roomStatusPowerWatts
The room power Watt. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.6
roomStatusPowerVA
The room power VA. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.7
roomStatusCurrent
The room current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.8
roomStatusVoltage
The room Voltage. 100x.
0.01VInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.9
roomStatusTemp
The temperature. 10x.
0.1CInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.10
roomStatusHumidity
The humidity. 10x.
0.1%Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.11
roomStatusRcmCurrent
The residual current in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.12
roomStatusRcmCurrentAc
The residual current AC component in mA
Integer32
Constraints:
range: 0-512
 .1.3.6.1.4.1.44568.1.1.110.1.1.13
roomStatusRcmCurrentDc
The residual current DC component in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.14
roomStatusL1
The room L1current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.15
roomStatusL2
The room L2 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.16
roomStatusL3
The room L3 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.110.1.1.17

aisleStatusTable

table
.1.3.6.1.4.1.44568.1.1.120.1 · 1 row entry · 18 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk aisleStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::aisleStatusTable' 
A list to display status of aisle.
aisleStatusEntry row .1.3.6.1.4.1.44568.1.1.120.1.1
A list to display status of an aisle.
Indexes
Column Syntax OID
aisleStatusIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.120.1.1.1
aisleStatusName
The aisle name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.120.1.1.2
aisleStatusState
The aisle statee.g. normal, degraded
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.120.1.1.3
aisleDcStatusName
The datacenter name in which this room is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.120.1.1.4
aisleRoomStatusName
The room name in which this aisle is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.120.1.1.5
aisleStatusKwhTotal
The aisle KWhTotal.
KWhInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.6
aisleStatusPowerWatts
The aisle power Watt. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.7
aisleStatusPowerVA
The aisle power VA. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.8
aisleStatusCurrent
The aisle current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.9
aisleStatusVoltage
The aisle Voltage. 100x.
0.01VInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.10
aisleStatusTemp
The aisle temperature. 10x.
0.1CInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.11
aisleStatusHumidity
The aisle humidity. 10x.
0.1%Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.12
aisleStatusRcmCurrent
The residual current in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.13
aisleStatusRcmCurrentAc
The residual current AC component in mA
Integer32
Constraints:
range: 0-512
 .1.3.6.1.4.1.44568.1.1.120.1.1.14
aisleStatusRcmCurrentDc
The residual current DC component in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.15
aisleStatusL1
The aisle L1current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.16
aisleStatusL2
The aisle L2 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.17
aisleStatusL3
The aisle L3 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.120.1.1.18

rackStatusTable

table
.1.3.6.1.4.1.44568.1.1.130.1 · 1 row entry · 19 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk rackStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::rackStatusTable' 
A list to display status of rack.
rackStatusEntry row .1.3.6.1.4.1.44568.1.1.130.1.1
A list to display status of an rack.
Indexes
Column Syntax OID
rackStatusIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.130.1.1.1
rackStatusName
The rack name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.130.1.1.2
rackStatusState
The rack state.g. normal, degraded
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.130.1.1.3
rackDcStatusName
The datacenter name in which this room is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.130.1.1.4
rackRoomStatusName
The room name in which this aisle is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.130.1.1.5
rackAisleStatusName
The room name in which this aisle is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.130.1.1.6
rackStatusKwhTotal
The rack KWhTotal.
KWhInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.7
rackStatusPowerWatts
The rack power Watt. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.8
rackStatusPowerVA
The rack power VA. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.9
rackStatusCurrent
The rack current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.10
rackStatusVoltage
The rack Voltage. 100x.
0.01VInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.11
rackStatusTemp
The rack temperature. 10x.
0.1CInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.12
rackStatusHumidity
The rack humidity. 10x.
0.1%Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.13
rackStatusRcmCurrent
The residual current in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.14
rackStatusRcmCurrentAc
The residual current AC component in mA
Integer32
Constraints:
range: 0-512
 .1.3.6.1.4.1.44568.1.1.130.1.1.15
rackStatusRcmCurrentDc
The residual current DC component in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.16
rackStatusL1
The rack L1current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.17
rackStatusL2
The rack L2 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.18
rackStatusL3
The rack L3 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.130.1.1.19

rackDeviceStatusTable

table
.1.3.6.1.4.1.44568.1.1.140.1 · 1 row entry · 21 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk rackDeviceStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::rackDeviceStatusTable' 
A list to display status of rackDevice.
rackDeviceStatusEntry row .1.3.6.1.4.1.44568.1.1.140.1.1
A list to display status of a rackDevice.
Indexes
Column Syntax OID
rackDeviceStatusIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.140.1.1.1
rackDeviceStatusName
The rack device name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.140.1.1.2
rackDeviceStatusState
The rackDevice state.g. normal, degraded
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.140.1.1.3
rackDeviceDcStatusName
The datacenter name in which this rack Device is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.140.1.1.4
rackDeviceRoomStatusName
The rackDevice in tha rack inroom name in which this aisle is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.140.1.1.5
rackDeviceAisleStatusName
The rackDevice in tha rack inroom name in which this aisle is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.140.1.1.6
rackDeviceRackStatusName
The rackDevice in tha rack inroom name in which this aisle is
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.140.1.1.7
rackDeviceStatusKwhTotal
The aisle KWhTotal.
KWhInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.8
rackDeviceStatusPowerWatts
The aisle power Watt. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.9
rackDeviceStatusPowerVA
The aisle power VA. 100x.
0.01WInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.10
rackDeviceStatusCurrent
The aisle current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.11
rackDeviceStatusVoltage
The aisle Voltage. 100x.
0.01VInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.12
rackDeviceStatusTemp
The aisle temperature. 10x.
0.1CInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.13
rackDeviceStatusHumidity
The aisle humidity. 10x.
0.1%Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.14
rackDeviceStatusSwitchState
The port switch state.
Enumeration
Enumerated Values:
1off
2on
3mixed
 .1.3.6.1.4.1.44568.1.1.140.1.1.15
rackDeviceStatusRcmCurrent
The residual current in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.16
rackDeviceStatusRcmCurrentAc
The residual current AC component in mA
Integer32
Constraints:
range: 0-512
 .1.3.6.1.4.1.44568.1.1.140.1.1.17
rackDeviceStatusRcmCurrentDc
The residual current DC component in mA
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.18
rackDeviceStatusL1
The rack device L1 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.19
rackDeviceStatusL2
The rack device L2 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.20
rackDeviceStatusL3
The rack device L3 current. 100x.
0.01AInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.140.1.1.21

rackDeviceConfigTable

table
.1.3.6.1.4.1.44568.1.1.141.1 · 1 row entry · 2 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk rackDeviceConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::rackDeviceConfigTable' 
A list to change status of RackDevice switch.
rackDeviceConfigEntry row .1.3.6.1.4.1.44568.1.1.141.1.1
A list to edit status of Switch.
Indexes
Column Syntax OID
rackDeviceConfigPduIndex
A unique value for each group.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.141.1.1.1
rackDeviceConfigSwitchState
The rack Device switch state.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.44568.1.1.141.1.1.2

currentUserStatusTable

table
.1.3.6.1.4.1.44568.1.1.600.1 · 1 row entry · 3 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk currentUserStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::currentUserStatusTable' 
A list to display of current logged in users.
currentUserStatusEntry row .1.3.6.1.4.1.44568.1.1.600.1.1
A list to display status of Inlet.
Indexes
Column Syntax OID
currentUserStatusIndex
A unique value for each PDU. Its value
ranges between 1 and the value of pduCount.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.600.1.1.1
currentUserStatusName
The logged in user name.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.600.1.1.2
currentUserStatusRole
The role of this user
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.600.1.1.3

warningsTable

table
.1.3.6.1.4.1.44568.1.1.700.1 · 1 row entry · 7 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk warningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::warningsTable' 
A list to display of current warnings.
warningsEntry row .1.3.6.1.4.1.44568.1.1.700.1.1
A list to display warnings.
Indexes
Column Syntax OID
warningsIndex
A unique value for each warning
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.700.1.1.1
warningsTopLevelType
This is a group or sensor
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.700.1.1.2
warningsTopLevelName
This is the group or device name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.700.1.1.3
warningsPortType
This is i, o s for device.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.700.1.1.4
warningsPortIndex
This is zero based port index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.700.1.1.5
warningsPortVariable
voltage, Current, etc.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.700.1.1.6
warningsValue
The value exceeding warning limit. 100x
0.01Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.700.1.1.7

criticalsTable

table
.1.3.6.1.4.1.44568.1.1.800.1 · 1 row entry · 7 columns
Open in standard view
Uses the schleifenbauer variant from /opt/observium/mibs/schleifenbauer.
Command help
Walk criticalsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCHLEIFENBAUER-GENERIC-MIB' -M '/opt/observium/mibs/schleifenbauer:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCHLEIFENBAUER-GENERIC-MIB::criticalsTable' 
A list to display of current criticals.
criticalsEntry row .1.3.6.1.4.1.44568.1.1.800.1.1
A list to display warnings.
Indexes
Column Syntax OID
criticalsIndex
A unique value for each critical
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.44568.1.1.800.1.1.1
criticalsTopLevelType
This is a group type or sensor
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.800.1.1.2
criticalsTopLevelName
This is the group or device name
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.800.1.1.3
criticalsPortType
This is i, o s for device.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.800.1.1.4
criticalsPortIndex
This is zero based port index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.800.1.1.5
criticalsPortVariable
voltage, Current, etc.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.44568.1.1.800.1.1.6
criticalsValue
The value exceeding critical limit. 100x
0.01Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.44568.1.1.800.1.1.7