SAVI-MIB Table View

The table containing savi system-wide parameters.

saviObjectsSystemEntry row .1.3.6.1.2.1.4.40.1.1.1

An entry containing savi system-wide parameters for a
particular IP version.

Indexes

saviObjectsSystemIPVersion

Column	Syntax	OID
saviObjectsSystemIPVersion The IP version	INET-ADDRESS-MIBInetVersion Type Values: 0 unknown 1 ipv4 2 ipv6	.1.3.6.1.2.1.4.40.1.1.1.1
saviObjectsSystemMode IP Address Assignment Methods.	Enumerationr/w Enumerated Values: 1 savi-disable 2 savi-default 3 savi-dhcp-only 4 savi-slaac-only 5 savi-dhcp-slaac-mix 6 savi-send	.1.3.6.1.2.1.4.40.1.1.1.2
saviObjectsSystemMaxDhcpResponseTime A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.3
saviObjectsSystemDataSnoopingInterval A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.4
saviObjectsSystemMaxLeaseQueryDelay A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.5
saviObjectsSystemOffLinkDelay A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.6
saviObjectsSystemDetectionTimeout A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.7
saviObjectsSystemTentLT A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.8
saviObjectsSystemDefaultLT A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.9
saviObjectsSystemTWAIT A constant. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647).	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.1.1.10
saviObjectsSystemNotifySpoofing Spoofing log status. enable indicates that spoofing log is enabled. disable indicates that spoofing log is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.4.40.1.1.1.11
saviObjectsSystemNotifyFilter Filtering entry log status. enable indicates that filtering log is enabled. disable indicates that filtering log is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.4.40.1.1.1.12
saviObjectsSystemNotifySpoofingInterval Interval for spoofing log. 0, 5 to 3600s.	Unsigned32r/w Constraints: range: 0-0 range: 5-3600	.1.3.6.1.2.1.4.40.1.1.1.13
saviObjectsSystemNotifySpoofingNumber Number of spoofing log entries. 1 to 128.	Unsigned32r/w Constraints: range: 1-128	.1.3.6.1.2.1.4.40.1.1.1.14
saviObjectsSystemBindingCount Current binding entry count.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.4.40.1.1.1.15
saviObjectsSystemFilteringCount Current filtering entry count.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.4.40.1.1.1.16

The table containing SAVI parameters of each anchor.

saviObjectsPortEntry row .1.3.6.1.2.1.4.40.1.2.1

An entry containing SAVI running parameters of an anchor.

Indexes

saviObjectsPortIPVersion saviObjectsPortIfIndex

Column	Syntax	OID
saviObjectsPortIPVersion The IP version	INET-ADDRESS-MIBInetVersion Type Values: 0 unknown 1 ipv4 2 ipv6	.1.3.6.1.2.1.4.40.1.2.1.1
saviObjectsPortIfIndex The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.4.40.1.2.1.2
saviObjectsPortValidatingAttr An attribute defined in SAVI protocol. enable(1), the attribute is set. disable(2), the attribute is not set.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.4.40.1.2.1.3
saviObjectsPortDhcpTrustAttr An attribute defined in SAVI protocol. enable(1), the attribute is set. disable(2), the attribute is not set.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.4.40.1.2.1.4
saviObjectsPortTrustAttr An attribute defined in SAVI protocol. enable(1), the attribute is set. disable(2), the attribute is not set.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.4.40.1.2.1.5
saviObjectsPortDhcpSnoopingAttr An attribute defined in SAVI protocol. enable(1), the attribute is set. disable(2), the attribute is not set.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.4.40.1.2.1.6
saviObjectsPortDataSnoopingAttr An attribute defined in SAVI protocol. enable(1), the attribute is set. disable(2), the attribute is not set.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.4.40.1.2.1.7
saviObjectsPortFilteringNum The max filtering number of the Port.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.4.40.1.2.1.8

The table containing the state of binding
between source address and anchor.

saviObjectsBindingEntry row .1.3.6.1.2.1.4.40.1.3.1

An entry containing the state of binding between source
address and anchor.
Entries are keyed on the source IP address type,
binding type, anchor, and source IP address.

Indexes

saviObjectsBindingIpAddressType saviObjectsBindingType saviObjectsBindingIfIndex saviObjectsBindingIpAddress

Column	Syntax	OID
saviObjectsBindingIpAddressType IP address type of the binding source IP.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.4.40.1.3.1.1
saviObjectsBindingType IP address assignment methods.	Enumeration Enumerated Values: 1 manual 2 slaac 3 dhcp 4 send	.1.3.6.1.2.1.4.40.1.3.1.2
saviObjectsBindingIfIndex The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.4.40.1.3.1.3
saviObjectsBindingIpAddress The binding source IP address	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.4.40.1.3.1.4
saviObjectsBindingMacAddr The binding source mac address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.4.40.1.3.1.5
saviObjectsBindingState The state of the binding entry.	Enumerationr/w Enumerated Values: 1 nO-BIND 2 iNIT-BIND 3 bOUND 4 dETECTION 5 rECOVERY 6 vERIFY 7 tENTATIVE 8 vALID 9 tESTING-TP-LT 10 tESTING-VP 11 tESTING-VPP 12 tENTATIVE-NUD 13 tENTATIVE-DAD	.1.3.6.1.2.1.4.40.1.3.1.6
saviObjectsBindingLifetime The remaining lifetime of the entry. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647). If saviObjectsBindingType=manual, a value of 21474836…	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.4.40.1.3.1.7
saviObjectsBindingCreationtime The value of the local clock when the entry was firstly created.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.4.40.1.3.1.8
saviObjectsBindingTID The Transaction ID (TID) (refer to RFC2131 and RFC3315) of the corresponding DHCP transaction.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.4.40.1.3.1.9
saviObjectsBindingRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table. An Entry can be created or deleted only when saviObjectsBindingType=manual.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.4.40.1.3.1.10

The table containing the filtering entries.

saviObjectsFilteringEntry row .1.3.6.1.2.1.4.40.1.4.1

An entry containing the filtering parameters.
Entries are keyed on the source IP address type,
anchor, and source IP address.

Indexes

saviObjectsFilteringIpAddressType saviObjectsFilteringIfIndex saviObjectsFilteringIpAddress

Column	Syntax	OID
saviObjectsFilteringIpAddressType IP address type of the filtering source IP	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.4.40.1.4.1.1
saviObjectsFilteringIfIndex The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.4.40.1.4.1.2
saviObjectsFilteringIpAddress The filtering source IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.4.40.1.4.1.3
saviObjectsFilteringMacAddr The filtering source mac address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.4.40.1.4.1.4

The table containing count of packets dropped because of validation failure.

saviObjectsCountEntry row .1.3.6.1.2.1.4.40.1.5.1

An entry containing count of packets dropped because of validation failure for each interface.

Indexes

saviObjectsCountIPVersion saviObjectsCountIfIndex

Column	Syntax	OID
saviObjectsCountIPVersion The IP version	INET-ADDRESS-MIBInetVersion Type Values: 0 unknown 1 ipv4 2 ipv6	.1.3.6.1.2.1.4.40.1.5.1.1
saviObjectsCountIfIndex The Interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.4.40.1.5.1.2
saviObjectsCountFilterPkts Dropped packet count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.4.40.1.5.1.3
saviObjectsCountFilterOctets Dropped octet count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.4.40.1.5.1.4