SAVEPOWER-MIB Table View

This table contains one row for every power block that
controls a group of physical ports.

hpicfSavepowerEntry row .1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1

Information about Savepower table.

Indexes

hpicfSavepowerBlockID

Column	Syntax	OID
hpicfSavepowerBlockID The index that is used to access the power block entry table.	SavepowerBlockIndex	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.1
hpicfSavepowerControl This indicates if the power to the block is powerOn (1) or powerOff (2).	SavepowerControlr/w Type Values: 1 powerOn 2 powerOff	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.2
hpicfSavepowerBlockPorts This indicates the port-range associated to the hpisfSavepowerBlockID.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.3

This table contains a row for different entities and
shows the admin status and operational status of the
 power and LED for that entity.

hpicfSavepowerGreenFeaturesEntry row .1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1

Information about SavepowerGreenFeatures table.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpicfSavepowerEntityPowerAdminStatus The truth value indicates the configured status of the entity power.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.1
hpicfSavepowerEntityPowerOperStatus This indicates the operational status of the entity as powerOn(1) if turned on or powerOff(2) if turned off.	SavepowerControl Type Values: 1 powerOn 2 powerOff	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.2
hpicfSavepowerEntityLEDAdminStatus The truth value indicates the configured status of the entity's LED power status.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.3
hpicfSavepowerEntityLEDOperStatus This indicates if the operational status of the entity's LED power is powerOn (1) or powerOff (2).	SavepowerControl Type Values: 1 powerOn 2 powerOff	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.4

This table contains a row for every port for which
the PHY will be put to auto low power mode or normal
 power mode and contains the admin status and operational status of the PHY .

hpicfSavepowerPHYEntry row .1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1

Information about PHY power status for ports.

Indexes

hpicfSavepowerSlotNum hpicfSavepowerPortNum

Column	Syntax	OID
hpicfSavepowerSlotNum This value serves as an index to identify the slot no. for the PHY.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.1
hpicfSavepowerPortNum This value serves as an index to identify the port no. for the PHY.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.2
hpicfSavepowerPHYAdminStatus The truth value indicates the configured status of the auto low power mode for the PHY.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.3
hpicfSavepowerPHYOperStatus This indicates if the operational status of the PHY power is auto low power mode i.e. powerOff(2) or normal power mode i.e. or powerOn(1).	SavepowerControl Type Values: 1 powerOn 2 powerOff	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.4

This table contains a row for every member in a 
stack setup or for a standalone device or for 
every slot in a chassis, for which the PHY will 
be put to auto low power mode or normal power mode 
and contains the admin status and operational 
status of the PHY .

hpicfSavepowerEntPHYEntry row .1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1

Information about PHY power status.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpicfSavepowerEntPHYAdminStatus The truth value indicates the configured status of the auto low power mode for the PHY. True indicates PHY is in low power mode.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1.1
hpicfSavepowerEntPHYOperStatus This indicates if the operational status of the PHY power is auto low power mode i.e. powerOff(2) or normal power mode i.e. powerOn(1).	SavepowerControl Type Values: 1 powerOn 2 powerOff	.1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1.2