SAMSUNG-PRINTER-EXT-MIB Table View

A table of general counters and information for ease of use of
the SCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.
          
Usage:  The ONLY valid row in the 'scmPrtBaseTable'
shall ALWAYS have an 'scmPrtBaseIndex' of one ('1').

scmPrtBaseEntry row .1.3.6.1.4.1.236.11.5.11.55.1.2.1

An entry of general counters and information for ease of use of
the SCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.

Usage: The ONLY valid row in the 'scmPrtBaseTable…

Indexes

scmPrtBaseIndex

Column	Syntax	OID
scmPrtBaseIndex A unique value used by this host system to identify this conceptual row in the 'scmPrtBaseTable'. Usage: The ONLY valid row in the 'scmPrtBaseTable' shall ALWAYS have an 'scmPrtBaseIndex' of one ('1').	SAMSUNG-GENERAL-TCOrdinal32 Constraints: range: 0-35	.1.3.6.1.4.1.236.11.5.11.55.1.2.1.1
scmPrtBaseRowStatus This object is used to display status of the ONLY valid conceptual row in the 'scmPrtBaseTable'. Usage: 'scmPrtBaseRowStatus' is 'read-only' because the ONLY valid conceptual row shall NOT be deleted.	SNMPv2-TCRowStatus Enumerated Values: 1 donothing 2 reset Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.236.11.5.11.55.1.2.1.2

A table of general information per printer.
This table augments the prtGeneralTable.

scmPrtGeneralEntry row .1.3.6.1.4.1.236.11.5.11.55.5.2.1

An entry exists in this table for each device entry in the
hostmib device table whose type is printer.

Indexes

REDLINE-E1T1-MIBe1t1SerialID

Column	Syntax	OID
scmPrtGeneralRowStatus Manages the status of this conceptual row in the scmPrtGeneralTable.	SNMPv2-TCRowStatusr/w Constraints: range: 1-4 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.236.11.5.11.55.5.2.1.1

This table logically augments the Printer MIB's prtInputTable.

scmPrtInputEntry row .1.3.6.1.4.1.236.11.5.11.55.8.2.1

Entries may exist for each entry in the prtInputTable.

Indexes

No indexes recorded

Column	Syntax	OID
scmPrtInputRowStatus Manages the status of this conceptual row in the scmPrtInputTable.	SNMPv2-TCRowStatusr/w Constraints: range: 1-128 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.1
scmPrtInputNextPrtInputIndex The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied. The value of zero indicates that auto input switching wil…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.2
scmPrtInputUseCustomSize Specifies how this input subunit determines the paper size to use. If the value is 'Off' this input subunit uses the paper size automatically sensed by the subunit. If the value is 'On' thi…	Printer-MIBPresentOnOffr/w Type Values: 1 other 3 on 4 off 5 notPresent	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.3
scmPrtInputCustDimFeedDirDecl Provides the dimension, in the feed direction, of the media in this input subunit, when the value of scmPrtInputUseCustomSize is set to 'On'. When scmPrtInputUseCustomSize is set to On, this value is copi…	SNMPv2-SMIInteger32r/w Constraints: range: 0-127	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.4
scmPrtInputCustDimXFeedDirDecl Provides the dimension, in the feed direction, of the media in this input subunit, when the value of scmPrtInputUseCustomSize is set to 'On'. When scmPrtInputUseCustomSize is set to 'On', this value is co…	SNMPv2-SMIInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.5
scmPrtInputTrayPriority The current priority of this tray. This value/mechanism is independent of scmPrtNextPrtInputIndex and scmPrtInputAliasGroup. Usage: The priority of this device, where '0' is unspecified (default), '1' i…	SNMPv2-SMIInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.6
scmPrtInputPaperSize Value of Paper size for printing. Some printer such like ML6060 or Modena have a 4 bytes data length. So, to distinguish these models we have to check model id or version.	SNMPv2-SMIInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.7
scmPrtInputPaperSizeOptions Paper size options that are available in this model. Some printer such like ML6060 or Modena have a 4 bytes data length. So, to distinguish these models we have to check model id or version.	Enumeration Enumerated Values: 1 letter 2 legal 4 a4 8 executive 16 jisB5 32 isoB5 64 com10 128 monarch 256 dl 512 c5 1024 postA6 2048 c6 4096 folio 8192 a5 16384 statement 32768 a6 65536 ledger 131072 a3 262144 jisB4 524288 jpost 1048576 jpostd 2097152 custom 4194304 letterP 8388608 a4P 16777216 jisB5P 33554432 a5P 67108864 executiveP 134217728 statementP 268435456 a3Over 536870912 b5Envelope	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.8
scmPrtInputTrayNum It can select the type of paper tray. The types of tray can be varied according to the printer model	SNMPv2-SMIInteger32r/w Constraints: range: 10-300	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.9
scmPrtInputTrayNumOptions available options of tray types	SNMPv2-SMIInteger32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.236.11.5.11.55.8.2.1.10

This table logically augments the prtOutputTable in the
Printer MIB.

scmPrtOutputEntry row .1.3.6.1.4.1.236.11.5.11.55.9.1.1

Entries may exist for each entry in the prtOutputTable.

Indexes

No indexes recorded

Column	Syntax	OID
scmPrtOutputRowStatus Manages the status of this conceptual row in the scmPrtOutputTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.1
scmPrtOutputNextIndex The value of prtOutputIndex corresponding to the output subunit which will be used when this output subunit is filled. A value of zero(0) indicates that auto output switching will not occur when this output subunit is f…	SNMPv2-SMIInteger32r/w Constraints: range: 1-4	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.2
scmPrtOutputPassword This object is used as the password for an Output Tray, e.g. an output mailbox. It is the value that must be entered to open the output tray.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.3
scmPrtOutputOffsetStackingType This object further refines the type of offset stacking from that specified by the object prtOutputOffsetStacking in the Printer MIB.	SAMSUNG-PRINTER-EXT-TCScmPrtOutputOffsetStackingTyper/w Type Values: 1 other 2 unknown 3 notSpecified 4 noOffset 5 offsetOnJob 6 offsetOnJobandCopy	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.4
scmPrtOutputTrayTimeoutSupport Determines whether the printer should wait before sending the printed output to another output destination when the selected or default destination is full. 'On' indicates that would should wait as speci…	Printer-MIBPresentOnOffr/w Type Values: 1 other 3 on 4 off 5 notPresent	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.5
scmPrtOutputTrayTimeout Determines how long the printer should wait before sending the printed output to another output destination when the selected or default destination is full. A value of (0) implies 'other'…	SecondsSAMSUNG-GENERAL-TCCardinal32r/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.6
scmPrtOutputFinishier This object declares the printer output finishier.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.51
scmPrtOutputFinishierOptions This object declares the printer output finishier option. options 1. staple 2. punch	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.236.11.5.11.55.9.1.1.52

This table logically augments Printer MIB's prtChannelTable.

scmPrtChannelEntry row .1.3.6.1.4.1.236.11.5.11.55.14.2.1

An entry exists corresponding to each entry in the
prtChannelTable.

Indexes

No indexes recorded

Column	Syntax	OID
scmPrtChannelRowStatus Manages the status of this conceptual row in the scmPrtChannelTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.236.11.5.11.55.14.2.1.1
scmPrtChannelEOJTimeout Defines the number of seconds that the channel waits before timing out. For example, this may be used for the parallel channel. The value zero means infinite or no timeout on the channel.	SecondsSAMSUNG-GENERAL-TCCardinal32r/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.236.11.5.11.55.14.2.1.2

This table logically augments the Printer MIB's
prtInterpreterTable.

scmPrtInterpreterEntry row .1.3.6.1.4.1.236.11.5.11.55.15.2.1

An entry exists corresponding to each entry in the
prtInterpreterTable.

Indexes

No indexes recorded

Column	Syntax	OID
scmPrtInterpRowStatus Manages the status of this conceptual row in the scmPrtInterpreterTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.236.11.5.11.55.15.2.1.1
scmPrtInterpJobCopiesDefault This defines the default number of job copies to be printed by this interpreter. If set incorrectly, this object may cause difficulties at customer sites. Agent developers should consider making this obj…	SAMSUNG-GENERAL-TCOrdinal32r/w Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.236.11.5.11.55.15.2.1.9
scmPrtInterpLineTerm Enables adding a Carriage Return after every Line Feed. The value 'On' indicates that a Carriage Return will be added after every Line Feed. Usage example: This is a useful feature when p…	Printer-MIBPresentOnOffr/w Type Values: 1 other 3 on 4 off 5 notPresent	.1.3.6.1.4.1.236.11.5.11.55.15.2.1.33
scmPrtInterpProcessBarcodes Specifies whether the 'extra' barcode processing within the interpreter should be used.	Printer-MIBPresentOnOffr/w Type Values: 1 other 3 on 4 off 5 notPresent	.1.3.6.1.4.1.236.11.5.11.55.15.2.1.54
scmPrtInterpOrientation It determines the direction of the print image on the page. The first two kinds of options are portrait(tall) and landscape(wide). reversePortrait is 180 degrees rotation of portrait. reverseLandscape is 180 degrees rot…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.236.11.5.11.55.15.2.1.60
scmPrtInterpOrientationOptions available options in orientation	Enumeration Enumerated Values: 1 portrait 2 landscape 4 reverseLandscape 8 reversePortrait	.1.3.6.1.4.1.236.11.5.11.55.15.2.1.61