SAF-IPRADIO Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
45

radioTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10 · 1 row entry · 10 columns
Open in standard view
Uses the saf variant from /opt/observium/mibs/saf.
Command help
Walk radioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SAF-IPRADIO' -M '/opt/observium/mibs/saf:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SAF-IPRADIO::radioTable' 
Radio table.
radioEntry row .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1
Entry containing objects in radio table.
Indexes
Column Syntax OID
radioIndexmandatory
A unique value for each radio.
Its value represents UNIT:
1 - for 'local';
2 - for 'remote'
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.1
radioGenStatusmandatory
A General status of each radio:
1 - 'OK';
2 - 'error'
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.2
radioSidemandatory
Side for duplex communication.
Enumerationr/w
Enumerated Values:
1high
2low
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.3
radioTxPowermandatory
Tx power of radio transmitter in dBm.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.4
radioRxLevelmandatory
Received signal level in dBm.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.5
radioDuplexShiftmandatory
Utilized duplex shift in KHz.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.6
radioLoopbackmandatory
Radio loopback on/off. To set use
loopback command.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.7
radioTxMutemandatory
Status of 'Tx mute':
1 - Tx is muted;
2 - Tx is not muted.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.8
radioTxFrequencymandatory
Tx frequency in kHz.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.9
radioRxFrequencymandatory
Rx frequency in kHz.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.10

aTPCTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11 · 1 row entry · 3 columns
Open in standard view
Uses the saf variant from /opt/observium/mibs/saf.
Command help
Walk aTPCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SAF-IPRADIO' -M '/opt/observium/mibs/saf:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SAF-IPRADIO::aTPCTable' 
ATPC table
aTPCEntry row .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1
Entry containing objects in ATPC table.
Indexes
Column Syntax OID
atpcIndexmandatory
Its value represents UNIT
1 for 'local';
2 for 'remote'.
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.1
atpcEnabledmandatory
ATPC status:
1 for 'on';
2 for 'off'.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.2
atpcTxPowerCorrectionmandatory
ATPC Tx power correction in dBm.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.3

modemTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12 · 1 row entry · 23 columns
Open in standard view
Uses the saf variant from /opt/observium/mibs/saf.
Command help
Walk modemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SAF-IPRADIO' -M '/opt/observium/mibs/saf:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SAF-IPRADIO::modemTable' 
CFIP modem table.
modemEntry row .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1
Entry containing objects in modem table.
Indexes
Column Syntax OID
modemIndexmandatory
Value represents UNIT:
1 for local;
2 for remote.
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.1
modemGeneralStatusmandatory
A General status of each modem:
1 - 'OK';
2 - 'error'
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.2
modemBandwithmandatory
Modem bandwidth set in KHz.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.3
modemE1T1Channelsmandatory
Number of E1 or T1 channels set.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.4
modemModulationmandatory
Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8…
Enumeration
Enumerated Values:
1qpsk
2psk8
3qam16
4qam32
5qam64
6qam128
7qam256
8qpsklimited
9wqpsk
10wpsk8
11wqam16
12wqam32
13wqam64
14wqam128
15wqam256
17acmqpsk
18acmpsk8
19acmqam16
20acmqam32
21acmqam64
22acmqam128
23acmqam256
25acmwqpsk
26acmwpsk8
27acmwqam16
28acmwqam32
29acmwqam64
30acmwqam128
31acmwqam256
33qam4
34qam8
40qam4limited
41wqam4
42wqam8
49acmqam4
50acmqam8
57acmwqam4
58acmwqam8
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.5
modemTotalCapacitymandatory
Total capacity set in Kbps.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.6
modemEthernetCapacitymandatory
Ethernet capacity set in Kbps.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.7
modemAcqStatusmandatory
 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.8
modemLastAcqErrormandatory
 Enumeration
Enumerated Values:
1success
2erragc
3errtiming
4errfreqsweep
5errmse
6errbit
7errservice
8errblind
9errtimeout
10errstopped
11errfatal
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.9
modemRadialMSEmandatory
Radial mean square error value *10 in dB.
Radial MSE is a method for estimating the
signal to noise ratio. ACM engine uses
normalized MSE, which is the inverse of SNR.
It is calculated by dividing the estima…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.10
modemInternalAGCgainmandatory
dBm
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.11
modemCarrierOffsetmandatory
Carrier frequency offset in Hz.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.12
modemSymbolRateTxmandatory
kHz
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.13
modemSymbolRateRxmandatory
kHz
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.14
modemLDPCdecoderStressmandatory
The load of LDPC (low-density
parity-check code) decoder.
The LDPC is monitored for the number
of errors being corrected on the input
of LDPC decoder.
LDPC stress value thresholds @ BER 1.0e-06:
- for standard se…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.15
modemACMenginemandatory
Status of ACM engine. When 'on',
value '1' is shown, when 'off' - value is '2'.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.16
modemACMmodulationMinmandatory
Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8…
Enumerationr/w
Enumerated Values:
1qpsk
2psk8
3qam16
4qam32
5qam64
6qam128
7qam256
8qpsklimited
9wqpsk
10wpsk8
11wqam16
12wqam32
13wqam64
14wqam128
15wqam256
17acmqpsk
18acmpsk8
19acmqam16
20acmqam32
21acmqam64
22acmqam128
23acmqam256
25acmwqpsk
26acmwpsk8
27acmwqam16
28acmwqam32
29acmwqam64
30acmwqam128
31acmwqam256
33qam4
34qam8
40qam4limited
41wqam4
42wqam8
49acmqam4
50acmqam8
57acmwqam4
58acmwqam8
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17
modemACMtotalCapacitymandatory
Total capacity in Kbps set by ACM.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.18
modemACMethernetCapacitymandatory
Ethernet capacity in Kbps set by ACM.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.19
modemStandardmandatory
Modem operational standard ETSI or ANSI
Enumerationr/w
Enumerated Values:
1etsi
2ansi
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20
modemE1T1ChannelMaskmandatory
E1 or T1 channel mask 0x00 - 0x0f
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.21
modemACMmodulationMaxmandatory
Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8…
Enumerationr/w
Enumerated Values:
1qpsk
2psk8
3qam16
4qam32
5qam64
6qam128
7qam256
8qpsklimited
9wqpsk
10wpsk8
11wqam16
12wqam32
13wqam64
14wqam128
15wqam256
17acmqpsk
18acmpsk8
19acmqam16
20acmqam32
21acmqam64
22acmqam128
23acmqam256
25acmwqpsk
26acmwpsk8
27acmwqam16
28acmwqam32
29acmwqam64
30acmwqam128
31acmwqam256
33qam4
34qam8
40qam4limited
41wqam4
42wqam8
49acmqam4
50acmqam8
57acmwqam4
58acmwqam8
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22
modemRowStatusmandatory
Row status - to update written data for
modemBandwith,
modemACMmodulationMin,
modemACMmodulationMax,
modemE1T1ChannelMask.
Enumerationr/w
Enumerated Values:
1active
3notReady
4undo
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.23

vlanTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the saf variant from /opt/observium/mibs/saf.
Command help
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SAF-IPRADIO' -M '/opt/observium/mibs/saf:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SAF-IPRADIO::vlanTable' 
Vlan table
vlanEntry row .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1
entry containing vlan objects
Indexes
No indexes recorded
Column Syntax OID
vlanNumbermandatory
A unique value for each vlan.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.1
vlanPortTypemandatory
VLAN port type
management, traffic or endpoint
Enumerationr/w
Enumerated Values:
1management
2none
3traffic
4endpoint
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.2
vlanPortmapmandatory
display port bindings
bitfield 111(bin)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.3
vlanFidoptional
a filtering identifier (assigned automagically)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.4
vlanCfgStatmandatory
enable/disable vlan # or clear row data
Enumerationr/w
Enumerated Values:
1enable
2disable
3clear
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.5
vlanRowStatusmandatory
Row status (execute configuration on active)
Changing any table value sets this value into
state notReady. To update row status write value
active(1) into this variable.
Enumerationr/w
Enumerated Values:
1active
3notReady
4undo
 .1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.6

e1t1StatTable

table mandatory
.1.3.6.1.4.1.7571.100.1.1.5.1.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the saf variant from /opt/observium/mibs/saf.
Command help
Walk e1t1StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SAF-IPRADIO' -M '/opt/observium/mibs/saf:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SAF-IPRADIO::e1t1StatTable' 
E1 (T1) status Table.
e1t1StatEntry row .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1
Entry containing objects in E1 (T1) table
Indexes
No indexes recorded
Column Syntax OID
e1t1LOSmandatory
if signal loss present
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.1
e1t1AISmandatory
if AIS present
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.2
e1t1ChannelNrmandatory
e1 channel number (it is not associated with interface number - ifEntry)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.3