S5-ETHERNET-TRAP-MIB

        5000 Ethernet Trap MIB
        
Copyright 1993-2009 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
        
This Specification is supplied 'AS IS,' and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.

Imported Objects

s5EnRedPortCompanionBrdNum, s5EnRedPortCompanionPortNum, s5EnRedPortRemoteOperStatus, s5EnRedPortRedundMode, s5EnRedPortOperStatusS5-ETH-REDUNDANT-LINKS-MIB
s5EnPortPartStatus, s5EnPortJabberStatus, s5EnPortLinkStatusS5-ETHERNET-COMMON-MIB
s5EthTrapS5-ROOT-MIB
s5SbsViolationStatusBrdIndx, s5SbsViolationStatusPortIndx, s5SbsViolationStatusMACAddress, s5SbsMgmViolationType, s5SbsMgmViolationIpAddressS5-SWITCH-BAYSECURE-MIB
MODULE-IDENTITY, NOTIFICATION-TYPESNMPv2-SMI

Objects

s5EthernetTrapMib .1.3.6.1.4.1.45.1.6.2.1.0

Notifications/Traps

NameOIDDescription
s5EtrSbsMacTableFull.1.3.6.1.4.1.45.1.6.2.1.0.1
This trap is sent when the mac-security address table
is filled.
s5EtrNewRedPortFailure






.1.3.6.1.4.1.45.1.6.2.1.0.10
A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
  s5EnRedPortOperStatus.........The status of the port.
              The value will distinguish between a
              local fault, a remote fault, and a
              missing board.
  s5EnRedPortCompanionBrdNum....The index of the slot
              containing the board of the other port
              in the redundant pair.
  s5EnRedPortCompanionPortNum...The index of the other
              port in the redundant pair.
  s5EnPortPartStatus, s5EnPortLinkStatus and
  s5EnPortJabberStatus..........These values may help
              determine the cause of the local fault.
s5EtrNewRedBadRemCfgDetected


.1.3.6.1.4.1.45.1.6.2.1.0.11
This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
  s5EnRedPortRemoteOperStatus.....The value of the
              received signal from the remote port.
  s5EnRedPortRedundMode...the redundancy mode of the port.
s5EtrMacAddressTablesThresholdReached.1.3.6.1.4.1.45.1.6.2.1.0.12
A s5EtrMacAddressTablesThresholdReached trap signifies that 
the MAC address tables threshold is reached.
s5EtrSbsMacTableClearedForPort


.1.3.6.1.4.1.45.1.6.2.1.0.2
This trap is sent when the mac-security address table
is cleared for a particular port.
s5EtrSbsMacTableCleared.1.3.6.1.4.1.45.1.6.2.1.0.3
This trap is sent when the mac-security address table
is cleared for all ports.
s5EtrSbsMacRemoved



.1.3.6.1.4.1.45.1.6.2.1.0.4
This trap is sent when a mac address is removed from the
mac-security address table.
s5EtrNewSbsMacAccessViolation



.1.3.6.1.4.1.45.1.6.2.1.0.5
This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected. 
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
                         a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
                         a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
                                    this violation
s5EtrNewMgmAccessViolation


.1.3.6.1.4.1.45.1.6.2.1.0.6
This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected. 
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet 
                        access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address.
s5EtrNewPortManualPart


.1.3.6.1.4.1.45.1.6.2.1.0.7
A port was manually partitioned (wrapped). This
trap is sent once when the port is initially 
partitioned. The following values are
returned:
  s5EnPortPartStatus.....the partition status
    of the port, with the instance identifying
    the board and the port.
  s5EnPortJabberStatus...the jabber status of
    the DTE(s) connected to the port, with the
    instance identifying the board and the port.
s5EtrNewPortAutoPart


.1.3.6.1.4.1.45.1.6.2.1.0.8
A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
  s5EnPortPartStatus.....the partition status
    of the port, with the instance identifying
    the board and the port.
  s5EnPortJabberStatus...the jabber status of
    the DTE(s) connected to the port, with the
    instance identifying the board and the port.
s5EtrNewPortDteJabbering

.1.3.6.1.4.1.45.1.6.2.1.0.9
An ethernet DTE started jabbering.  This trap
is sent only once when the condition is first
detected. The following values are returned:
  s5EnPortJabberStatus...the jabber status of
    the DTE(s) connected to the port, with the
    instance identifying the board and the port.
s5EtrPortAutoPart


.1.3.6.1.4.1.45.1.6.2.1.1
A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
  s5EnPortPartStatus.....the partition status
    of the port, with the instance identifying
    the board and the port.
  s5EnPortJabberStatus...the jabber status of
    the DTE(s) connected to the port, with the
    instance identifying the board and the port.
s5EtrPortDteJabbering

.1.3.6.1.4.1.45.1.6.2.1.2
An ethernet DTE started jabbering.  This trap
is sent only once when the condition is first
detected. The following values are returned:
  s5EnPortJabberStatus...the jabber status of
    the DTE(s) connected to the port, with the
    instance identifying the board and the port.
s5EtrRedPortFailure






.1.3.6.1.4.1.45.1.6.2.1.3
A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
  s5EnRedPortOperStatus.........The status of the port.
              The value will distinguish between a
              local fault, a remote fault, and a
              missing board.
  s5EnRedPortCompanionBrdNum....The index of the slot
              containing the board of the other port
              in the redundant pair.
  s5EnRedPortCompanionPortNum...The index of the other
              port in the redundant pair.
  s5EnPortPartStatus, s5EnPortLinkStatus and
  s5EnPortJabberStatus..........These values may help
              determine the cause of the local fault.
s5EtrRedBadRemCfgDetected


.1.3.6.1.4.1.45.1.6.2.1.4
This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
  s5EnRedPortRemoteOperStatus.....The value of the
              received signal from the remote port.
  s5EnRedPortRedundMode...the redundancy mode of the port.
s5EtrSbsMacAccessViolation



.1.3.6.1.4.1.45.1.6.2.1.5
This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected. 
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
                         a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
                         a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
                                    this violation
s5EtrMgmAccessViolation


.1.3.6.1.4.1.45.1.6.2.1.6
This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected. 
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet 
                        access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address.
s5EtrPortManualPart


.1.3.6.1.4.1.45.1.6.2.1.7
A port was manually partitioned (wrapped). This
trap is sent once when the port is initially 
partitioned. The following values are
returned:
  s5EnPortPartStatus.....the partition status
    of the port, with the instance identifying
    the board and the port.
  s5EnPortJabberStatus...the jabber status of
    the DTE(s) connected to the port, with the
    instance identifying the board and the port.