S5-COMMON-STATS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

s5CmSNodeTable

table mandatory

.1.3.6.1.4.1.45.1.6.5.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk s5CmSNodeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-COMMON-STATS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-COMMON-STATS-MIB::s5CmSNodeTable'

A Table of MAC addresses of active nodes, which are
detected to be connected to the concentrator.
These nodes may be directly connected to the
concentrator or may be indirectly connected via
an interconnect port, bridge or switch.  The definition
of active node is provided by s5CmSNodeStatus.
          
The object s5CmSNodeIfIndex specifies the
source that is used to detect MAC addresses.  When the
source is not an interface, the agent uses best effort to
detect entries.  These entries may, but are not required
to be, MACs from media types other than the interfaces
for the agent.
          
This table is indexed by source of the detection,
board, port, and MAC address of the node.  This 
table is indexed differently from the FindNodes
table which uses only the source of the detection
and MAC address of the node.  Note: a MAC
address could appear multiple times in this
table (on different board and port).

s5CmSNodeEntry row .1.3.6.1.4.1.45.1.6.5.1.1.1

A row in the Show Node table.
Entries can not be created or deleted via
SNMP.

Indexes

s5CmSNodeIfIndx s5CmSNodeBrdIndx s5CmSNodePortIndx s5CmSNodeMacAddr

Column Syntax OID

s5CmSNodeIfIndxmandatory

An integer value representing the source
that detected the active node. A value greater
than zero is the index of the agent's interface
in the NMM. This is the same value as ifIndex
for the interface. A value of zer…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.45.1.6.5.1.1.1.1

s5CmSNodeBrdIndxmandatory

The index of the board. This corresponds to
the index of the slot containing the board.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.45.1.6.5.1.1.1.2

s5CmSNodePortIndxmandatory

The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.45.1.6.5.1.1.1.3

s5CmSNodeMacAddrmandatory

The MAC address of the station.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.45.1.6.5.1.1.1.4

s5CmSNodeStatusmandatory

The status of the MAC address for a station.
The meaning varies depending on the media type
of the NMM reporting the status. The values are:
other(1)......unknown or other
active(2).....the station is actively sendi…

Enumeration

Enumerated Values:

1	other
2	active
3	inactive

.1.3.6.1.4.1.45.1.6.5.1.1.1.5

s5CmFNodeTable

table mandatory

.1.3.6.1.4.1.45.1.6.5.1.2 · 1 row entry · 4 columns

Open in standard view

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk s5CmFNodeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-COMMON-STATS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-COMMON-STATS-MIB::s5CmFNodeTable'

A Table of MAC addresses of active nodes, which are
detected to be connected to the concentrator.
These nodes may be directly connected to the
concentrator or may be indirectly connected via
an interconnect port, bridge or switch.  The definition
of active node is provided by s5CmSNodeStatus.
          
The object s5CmSNodeIfIndex specifies the
source that is used to detect MAC addresses.  When the
source is not an interface, the agent uses best effort to
detect entries.  These entries may, but are not required
to be, MACs from media types other than the interfaces
for the agent.
          
This table is indexed by source of the detection
and MAC address of the node.  This 
table is indexed differently from the ShowNodes
table which uses the source of the detection,
board, port, and MAC address of the node.
          
Note: The same MAC may be detected at several
locations.  The entry in this table is the last 
detected location.  In addition, more than one
MAC address could appear on the same board
and port.

s5CmFNodeEntry row .1.3.6.1.4.1.45.1.6.5.1.2.1

A row in the Find Node table.
Entries can not be created or deleted via
SNMP.

Indexes

s5CmFNodeIfIndx s5CmFNodeMacAddr

Column	Syntax	OID
s5CmFNodeIfIndxmandatory An integer value representing the source that detected the active node. A value greater than zero is the index of the agent's interface in the NMM. This is the same value as ifIndex for the interface. A value of zer…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.45.1.6.5.1.2.1.1`
s5CmFNodeMacAddrmandatory MAC address of the station.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.45.1.6.5.1.2.1.2`
s5CmFNodeBrdIndxmandatory The index of the board. This corresponds to the index of the slot containing the board. The value of zero has the special meaning that the true board index value is currently unknown. Note that the syntax of this obje…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.45.1.6.5.1.2.1.3`
s5CmFNodePortIndxmandatory The index of the port on the board. This corresponds to the index of one of the manageable ports on the board. The value of zero has the special meaning that the true port index value is currently unknown. Note that t…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.45.1.6.5.1.2.1.4`

s5CmNetAddrTable

table mandatory

.1.3.6.1.4.1.45.1.6.5.1.3 · 1 row entry · 8 columns

Open in standard view

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk s5CmNetAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-COMMON-STATS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-COMMON-STATS-MIB::s5CmNetAddrTable'

A table of network layer addresses associated
with MAC addresses of active nodes, which are
detected to be connected to the concentrator.
          
This table is indexed by the interface it was
detected, the board and port the node is connected,
the MAC address of the node and an integer index 
(enumerating multiple network addresses).
          
Note:
Only a small implementation determined number of 
network addresses are stored. The oldest one is 
discarded, so that the most recent one may be
retained.  When packet decoding is switched off
entries in the network address mapping table may
remain present for some time, but no new addresses
are added.  An network address could appear multiple
times in this table (on different board and port)
and can appear under different s5CmNetAddrNetIndx
over time.

s5CmNetAddrEntry row .1.3.6.1.4.1.45.1.6.5.1.3.1

A row in the network address mapping table.
Entries can not be created or deleted
via SNMP.

Indexes

s5CmNetAddrIfIndex s5CmNetAddrBrdIndx s5CmNetAddrPortIndx s5CmNetAddrMacAddr s5CmNetAddrNetIndx

Column Syntax OID

s5CmNetAddrIfIndexmandatory

The index of the interface on the NMM on
which the address was detected. This is the
same as the ifIndex.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.45.1.6.5.1.3.1.1

s5CmNetAddrBrdIndxmandatory

The index of the board. This corresponds to
the index of the slot containing the board.