S5-CHASSIS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
11
Rows
11
Columns
112
s5ChasGrpTable
table.1.3.6.1.4.1.45.1.6.3.2.1
·
1 row entry
·
8 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasGrpTable'
A table that contains information about each group that can contain chassis components.
A row in the group table.
Rows can not be created or deleted via
SNMP requests. The number of entries
is determined by the physical construction
of the chassis.
Rows can not be created or deleted via
SNMP requests. The number of entries
is determined by the physical construction
of the chassis.
Indexes
| Column | Syntax | OID |
|---|---|---|
| s5ChasGrpIndxThe index of the group. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.2.1.1.1 |
| s5ChasGrpTypeThe type of the group. The group type determines the types of items that can be plugged into the positions in the group. The groups are defined under s5ChasGrpTypeVal in the Registration MIB. | ObjectIdentifier | .1.3.6.1.4.1.45.1.6.3.2.1.1.2 |
| s5ChasGrpDescrThe description of the group. If not available, the value is a zero length string. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.45.1.6.3.2.1.1.3 |
| s5ChasGrpMaxEntsThe maximum number of entries in the group. If not available, a value of -1 is returned. | Integer32 Constraints: range: -1-32767 | .1.3.6.1.4.1.45.1.6.3.2.1.1.4 |
| s5ChasGrpNumEntsThe current number of entries in the group. If not available, a value of -1 is returned. | Integer32 Constraints: range: -1-32767 | .1.3.6.1.4.1.45.1.6.3.2.1.1.5 |
| s5ChasGrpPhysChngsThe total number of physical changes (i.e., an addition or removal of a component or sub-component) that have been detected in the group since cold/warm start of the agent. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.2.1.1.6 |
| s5ChasGrpPhysLstChngThe value of sysUpTime that the last physical change (i.e., addition or removal of a module or sub-module) was detected in the group. If none have been detected since cold/warm start of the agent, then the value is zero. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.2.1.1.7 |
| s5ChasGrpEncodeFactorThe multiplication factor used in encoding the component index of a component in the group. The component index for any group should be determined in conjunction with this object for that group. A value of 1 indicates … | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.45.1.6.3.2.1.1.8 |
s5ChasComTable
table.1.3.6.1.4.1.45.1.6.3.3.1
·
1 row entry
·
30 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasComTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasComTable'
A table that contains information about each chassis level component and sub-component.
A row in the component/sub-component
table. Rows can not be created or
deleted via SNMP requests. Entries are
created and deleted when components or
sub-components are inserted or removed
from the chassis.
table. Rows can not be created or
deleted via SNMP requests. Entries are
created and deleted when components or
sub-components are inserted or removed
from the chassis.
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| s5ChasComGrpIndxThe index of the chassis level group which contains this component. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.1 | ||||||||||||||||||||||||
| s5ChasComIndxThe index of the component in the group. For example, for modules in the 'board' group, this is the slot number. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.2 | ||||||||||||||||||||||||
| s5ChasComSubIndxIf this table entry (i.e. table row) describes a component, then the value is zero. Otherwise, this table entry describes a sub-component and this is the index of the sub-component. | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.3 | ||||||||||||||||||||||||
| s5ChasComTypeThe type of component/sub-component. The values are defined under s5ChasComTypeVal in the Registration MIB. | ObjectIdentifier | .1.3.6.1.4.1.45.1.6.3.3.1.1.4 | ||||||||||||||||||||||||
| s5ChasComDescrA description of the component/sub-component. If not available, the value is a zero length string. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.45.1.6.3.3.1.1.5 | ||||||||||||||||||||||||
| s5ChasComVerThe version number of the component/sub-component. If not available, the value is a zero length string. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.6 | ||||||||||||||||||||||||
| s5ChasComSerNumThe serial number of the component/sub-component. If not available, the value is a zero length string. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.7 | ||||||||||||||||||||||||
| s5ChasComLstChngThe value of sysUpTime when it was detected that the component/sub-component was added to the chassis. If this has not occurred since the cold/warm start of the agent, then the value is zero. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.3.1.1.8 | ||||||||||||||||||||||||
| s5ChasComAdminStateThe desired state of the component/sub-component. The values that are read-only are: other(1)......currently in some other state notAvail(2)...actual value is not available The possible values that ca… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.45.1.6.3.3.1.1.9 | ||||||||||||||||||||||||
| s5ChasComOperStateThe current operational state of the component. The possible values are: other(1).........some other state notAvail(2)......state not available removed(3).......component removed disabled(4)......operation disab… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.45.1.6.3.3.1.1.10 | ||||||||||||||||||||||||
| s5ChasComMaxSubsThe potential number of sub-components that can be attached to the component. A value of zero means none. A value of -1 indicates that no component information is available. The actual number of installed sub-components… | Integer32 Constraints: range: -1-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.11 | ||||||||||||||||||||||||
| s5ChasComNumSubsThe actual number of sub-components that are attached to the component. A value of zero means none. A value of -1 indicates that no component information is available. The potential number of sub-components that can be … | Integer32 Constraints: range: -1-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.12 | ||||||||||||||||||||||||
| s5ChasComRelPosThis object describes the position of each component in the unit group relative to each other. Components in the unit group are numbered in the ascending order with the uppermost component being numbered one. The valu… | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.13 | ||||||||||||||||||||||||
| s5ChasComLocationThis object provides geographic location information of a component in a system modeled as a chassis, but possibly physically implemented with geographically separate devices connected together to exchange managment inf… | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.14 | ||||||||||||||||||||||||
| s5ChasComGroupMapThis object describes the group mapping of each component in the chassis. For the components in the unit group, the value of this object should be the backplane number to which the unit is connected. The value of this… | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.15 | ||||||||||||||||||||||||
| s5ChasComBaseNumPortsThis object indicates the number of ports (of any type) contained in a component, not including any sub-components contained within the component. | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.16 | ||||||||||||||||||||||||
| s5ChasComTotalNumPortsThis object indicates the total number of ports (of any type) contained in a component, including any ports contained in sub-components contained within the component. | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.3.1.1.17 | ||||||||||||||||||||||||
| s5ChasComIpAddressThe IP address of a component. For components that do not have an IP address/stack, this value should always be 0.0.0.0. Note that for a stackable system in stack mode, this will be the standalone IP address for indivi… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.45.1.6.3.3.1.1.18 | ||||||||||||||||||||||||
| s5ChasComRunningSoftwareVerThe version number of the software image running on this component/sub-component. If not available, the value is a zero length string. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.45.1.6.3.3.1.1.19 | ||||||||||||||||||||||||
| s5ChasComIpv6AddressThe IPv6 address of a component. For components that do not have an IPv6 address/stack, this value should always be 0::0. Note that for a stackable system in stack mode, this will be the standalone IPv6 address for ind… | IPV6-TCIpv6Addressr/w Type Constraints: range: 16 | .1.3.6.1.4.1.45.1.6.3.3.1.1.20 | ||||||||||||||||||||||||
| s5ChasComIpv6NetMaskThe IPv6 netmask of a component. For components that do not have an IPv6 address/stack, this value should always be 0::0. Note that for a stackable system in stack mode, this will be the standalone IPv6 netmask for ind… | IPV6-TCIpv6AddressPrefixr/w Type Constraints: range: 0..16 | .1.3.6.1.4.1.45.1.6.3.3.1.1.21 | ||||||||||||||||||||||||
| s5ChasComIpMgmtAddressThe IP address associated with the physical dedicated management port (out of band management port) of a component. For components that do not have an IP address/stack associated with the dedicated management port, this… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.45.1.6.3.3.1.1.22 | ||||||||||||||||||||||||
| s5ChasComIpMgmtNetMaskThe IP netmask associated with the physical dedicated management port (out of band management port) of a component. For components that do not have an IP address/stack associated with the dedicated management port, this… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.45.1.6.3.3.1.1.23 | ||||||||||||||||||||||||
| s5ChasComIpMgmtGatewayThe IP address of the default gateway associated with the physical dedicated management port (out of band management port) of a component. For components that do not have an IP address/stack associated with the dedicate… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.45.1.6.3.3.1.1.24 | ||||||||||||||||||||||||
| s5ChasComIpv6MgmtAddressThe IPv6 address associated with the physical dedicated management port (out of band management port) of a component. Note that for a stackable system in stack mode, this IP address always applies to individual uni… | IPV6-TCIpv6Addressr/w Type Constraints: range: 16 | .1.3.6.1.4.1.45.1.6.3.3.1.1.25 | ||||||||||||||||||||||||
| s5ChasComIpv6MgmtNetMaskThe IPv6 netmask associated with the physical dedicated management port (out of band management port) of a component. Note that for a stackable system in stack mode, this netmask always applies to individual units in … | IPV6-TCIpv6AddressPrefixr/w Type Constraints: range: 0..16 | .1.3.6.1.4.1.45.1.6.3.3.1.1.26 | ||||||||||||||||||||||||
| s5ChasComIpMgmtLimitThis object indicates the in-bound packet threshold rate for the management port (out of band management port). | packets per secondInteger32r/w Constraints: range: 50-10000 | .1.3.6.1.4.1.45.1.6.3.3.1.1.27 | ||||||||||||||||||||||||
| s5ChasComIpMgmtTimeoutThis object indicates the port shutdown period for the management port (out of band management port). | secondsInteger32r/w Constraints: range: 0-180 | .1.3.6.1.4.1.45.1.6.3.3.1.1.28 | ||||||||||||||||||||||||
| s5ChasComIpMgmtShutdownThis object is used to control whether the out of band management port is up or down (false for port up and true for port down). | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.45.1.6.3.3.1.1.29 | ||||||||||||||||||||||||
| s5ChasComUpTimeThe time (in hundredths of a second) since the unit was initialized. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.3.1.1.30 |
s5ChasBrdTable
table.1.3.6.1.4.1.45.1.6.3.4.1
·
1 row entry
·
10 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasBrdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasBrdTable'
A table containing information about each board that can be inserted into a slot. These include boards such as Repeater Modules and Network Management Modules.
A row in the board table. Entries can not
be created or deleted via SNMP. Entries are
created and deleted when boards are inserted
or removed from slots in the chassis.
be created or deleted via SNMP. Entries are
created and deleted when boards are inserted
or removed from slots in the chassis.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| s5ChasBrdIndxThe index of the board. This corresponds to the index of the slot containing the board. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.45.1.6.3.4.1.1.1 | ||||||||||||||||
| s5ChasBrdLedsA bit array that contains the value of the front panel LEDs and the annunciator. This is a packed bit string; each LED is encoded into 4 bits (a nibble). The first nibble is stored in the high order bits of the first oc… | OctetString | .1.3.6.1.4.1.45.1.6.3.4.1.1.2 | ||||||||||||||||
| s5ChasBrdNumAttThe total number of backplane network attachment points on the board. This may vary based on the mode of the board for FDDI. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.45.1.6.3.4.1.1.3 | ||||||||||||||||
| s5ChasBrdAttChngsThe total number of attachment changes for the board that have been detected since cold/warm start of the agent or since the board was inserted. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.4.1.1.4 | ||||||||||||||||
| s5ChasBrdAttLstChngThe value of sysUpTime when the last attachment change on the board has detected. If none have been detected since cold/warm start of the agent, then the value is zero. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.4.1.1.5 | ||||||||||||||||
| s5ChasBrdStatusDsplyThe current ASCII character display of the board. The length returned should match the length of the display. Boards with multiple displays should return the values concatenated together. Boards with no display hardware… | OctetString Constraints: range: 0-48 | .1.3.6.1.4.1.45.1.6.3.4.1.1.6 | ||||||||||||||||
| s5ChasBrdDateCodeThe date of manufacture of the board in ASCII in the format: YYYYmmdd. For example, the value for April 13, 1993 is 19930413. If not available, the value is a zero-length string. | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.45.1.6.3.4.1.1.7 | ||||||||||||||||
| s5ChasBrdCfgSrcThe source of the configuration at the last board reset. The values are: other(1)........unknown or some other value dfltJmpr(2).....default jumpers prmMem(3).......permanent memory on board brdCfg(4).......save… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.45.1.6.3.4.1.1.8 | ||||||||||||||||
| s5ChasBrdCfgChngsThe total number of configuration changes for the board that have been detected since cold/warm start of the agent or since the board was inserted. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.4.1.1.9 | ||||||||||||||||
| s5ChasBrdFanLedsA bit array that contains the value of the front panel LEDs of the fan trays. This is a packed bit string; each LED is encoded into 4 bits (a nibble). The first nibble is stored in the high order bits of the first octet… | OctetString | .1.3.6.1.4.1.45.1.6.3.4.1.1.10 |
s5ChasAttTable
table.1.3.6.1.4.1.45.1.6.3.4.2
·
1 row entry
·
7 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasAttTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasAttTable'
A table containing information about each backplane attachment point on a board. The number of entries for a board is the value of s5ChasBrdNumAtt.
A row in the attachment point table.
Entries can not be created or deleted
via SNMP. Entries are created and deleted
when boards are inserted or removed from
slots in the chassis, or the number of
attachment points is c…
Entries can not be created or deleted
via SNMP. Entries are created and deleted
when boards are inserted or removed from
slots in the chassis, or the number of
attachment points is c…
Indexes
| Column | Syntax | OID |
|---|---|---|
| s5ChasAttBrdIndxThe index of the board. This corresponds to the index of the slot containing the board. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.45.1.6.3.4.2.1.1 |
| s5ChasAttIndxThe index of the attachment point on the board. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.45.1.6.3.4.2.1.2 |
| s5ChasAttDfltAttThe default setting for the attachment point. An attachment point may be attached to a local channel, not attached to any backplane network, or attached to a media specific backplane network. (The valid choices depend o… | S5-TCS-MIBAttId Type Constraints: range: -255..255 | .1.3.6.1.4.1.45.1.6.3.4.2.1.3 |
| s5ChasAttCurAttThe current setting for the attachment point. The slot position of the board, the setting of the backplane divider switch(es), and the mode setting affect which backplane networks are valid values. Also, some boards may… | S5-TCS-MIBAttIdr/w Type Constraints: range: -255..255 | .1.3.6.1.4.1.45.1.6.3.4.2.1.4 |
| s5ChasAttChngsThe total number of attachment changes for the attachment point that have been detected since cold/warm start of the agent. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.4.2.1.5 |
| s5ChasAttLstChngThe value of sysUpTime when the last attachment change for the attachment point was detected. If none have been detected since cold/warm start of the agent, then the value is zero. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.4.2.1.6 |
| s5ChasAttClusterConnCapabilityA bit array that contains the bit map representing all available backplane segment and local segment connections for the cluster. One bit is also reserved to indicate if the cluster has an isolate capability. … | OctetString Constraints: range: 8-8 | .1.3.6.1.4.1.45.1.6.3.4.2.1.7 |
s5ChasLocChanTable
table.1.3.6.1.4.1.45.1.6.3.4.3
·
1 row entry
·
3 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasLocChanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasLocChanTable'
A table containing information about each 'dual mode' local channel on a board.
A row in the local channel table.
Entries can not be created or deleted
via SNMP. Entries are added or removed
by adding or removing a board that has
a 'dual mode' local channel from a slot
in the chassis.
Entries can not be created or deleted
via SNMP. Entries are added or removed
by adding or removing a board that has
a 'dual mode' local channel from a slot
in the chassis.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| s5ChasLocChanBrdIndxThe index of the board. This corresponds to the index of the slot containing the board. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.45.1.6.3.4.3.1.1 | ||||||
| s5ChasLocChanIndxThe index of the local channel. | S5-TCS-MIBLocChan Type Constraints: range: 0..255 | .1.3.6.1.4.1.45.1.6.3.4.3.1.2 | ||||||
| s5ChasLocChanBkplModeIndicates the attachment/isolation mode of a local channel to a backplane channel. The values that are read/write are: connected(2)......connect local chan N to bkpl N notConnected(3)...disconnect local chan N from … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.45.1.6.3.4.3.1.3 |
s5ChasStoreTable
table.1.3.6.1.4.1.45.1.6.3.5.1
·
1 row entry
·
11 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasStoreTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasStoreTable'
A table listing the storage areas on each component/sub-component in the chassis. The number is determined by the components in the chassis which have manageable storage areas. Examples of storage areas include RAM(main memory), FLASH, ROM, EEPROM, etc. This does not include disk drives.
A row in the table of storage areas.
The entries can not be created or
deleted via SNMP requests. Only those
components/sub-components that have
storage areas that are installed are
present. Storage areas that are on
co…
The entries can not be created or
deleted via SNMP requests. Only those
components/sub-components that have
storage areas that are installed are
present. Storage areas that are on
co…
| Column | Syntax | OID |
|---|---|---|
| s5ChasStoreGrpIndxThe index of the chassis level group which contains the component or sub-component containing the storage area. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.5.1.1.1 |
| s5ChasStoreComIndxThe index of the component or the component which contains the sub-component containing the storage area. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.5.1.1.2 |
| s5ChasStoreSubIndxIf the storage area is on a component, then the value zero. Otherwise, the storage area is on a sub-component and this is the index of the sub-component. | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.5.1.1.3 |
| s5ChasStoreIndxThe index of the storage area on the component or sub-component. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.45.1.6.3.5.1.1.4 |
| s5ChasStoreTypeThe storage area type on the containing component/sub-component. The values are defined under the .0 branch of the value of s5ChasComType for the component/sub-component containing the storage area in the Registration M… | ObjectIdentifier | .1.3.6.1.4.1.45.1.6.3.5.1.1.5 |
| s5ChasStoreCurSizeThe current size of the storage area in bytes. A value of zero means the storage area is not installed or not usable. A value of -1 indicates that the size is unknown (or unavailable). | Integer32 Constraints: range: -1-2147483647 | .1.3.6.1.4.1.45.1.6.3.5.1.1.6 |
| s5ChasStoreCntntVerThe version of the contents (i.e., the code or data) of the storage area in the form 'major.minor.maintenance[letters]'. If not known or not available, then the value is a zero length string. If multiple contents are st… | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.45.1.6.3.5.1.1.7 |
| s5ChasStoreFilenameName of the image file to be downloaded or uploaded when the s5AgInfoFileAction object is set to upload or download an image. When the object is not used, the value is a zero-length string. | OctetStringr/w Constraints: range: 0-255 | .1.3.6.1.4.1.45.1.6.3.5.1.1.8 |
| s5ChasStoreUsedSizeThe current size of the storage area that is currently in use, measured in bytes. A value of zero means the storage area is not in use. A value of -1 means the size is unknown (or unavailable). | Integer32 Constraints: range: -1-2147483647 | .1.3.6.1.4.1.45.1.6.3.5.1.1.9 |
| s5ChasStoreDescriptionA string describing the storage area. When the object is not used, the value is a zero-length string. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.45.1.6.3.5.1.1.10 |
| s5ChasStoreAgeA counter of the number of writes performed on this storage area which for areas residing in flash memory is an indication of the flash memory age. This number is the maximum number of writes for any of the access units… | Integer32 Constraints: range: -1-2147483647 | .1.3.6.1.4.1.45.1.6.3.5.1.1.11 |
s5ChasTmpSnrTable
table.1.3.6.1.4.1.45.1.6.3.7.1
·
1 row entry
·
5 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasTmpSnrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasTmpSnrTable'
A table that contains temperature sensor values.
A row in the s5ChasTmpSnrTable. Rows
in this table will exist for each existing
row in the s5ChasComTable which represents
a temperature sensor. The values of the
indices of the row in this table will be
equal to thos…
in this table will exist for each existing
row in the s5ChasComTable which represents
a temperature sensor. The values of the
indices of the row in this table will be
equal to thos…
| Column | Syntax | OID |
|---|---|---|
| s5ChasTmpSnrGrpIndxThe index of the chassis level group which contains this component, corresponds to s5ChasComGrpIndx. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.7.1.1.1 |
| s5ChasTmpSnrIndxThe index of the component in the group. Corresponds to s5ChasComIndx. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.7.1.1.2 |
| s5ChasTmpSnrSubIndxSub-component index. Corresponds to s5ChasComSubIndx. | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.7.1.1.3 |
s5ChasTmpSnrValuedeprecated The current temperature value of the temperaturesensor. This is measured in units of a half degree centigrade, e.g. a value of 121 indicates a temperature of 60.5 degrees C. This object is deprecated be… | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.45.1.6.3.7.1.1.4 |
| s5ChasTmpSnrTmpValueThe current temperature value of the temperature sensor. This is measured in units of a half degree centigrade, e.g. a value of 121 indicates a temperature of 60.5 degrees C. | Integer32 Constraints: range: -32768-32767 | .1.3.6.1.4.1.45.1.6.3.7.1.1.5 |
s5ChasUtilTable
table.1.3.6.1.4.1.45.1.6.3.8.1
·
1 row entry
·
13 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasUtilTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasUtilTable'
A table that contains CPU and memory utilization information.
A row in the s5ChasUtilTable. Rows
in this table will exist for each existing
row in the s5ChasComTable which represents
any chassis component for which CPU and/or
memory utilization values are available.
The values of…
in this table will exist for each existing
row in the s5ChasComTable which represents
any chassis component for which CPU and/or
memory utilization values are available.
The values of…
| Column | Syntax | OID |
|---|---|---|
| s5ChasUtilGrpIndxThe index of the chassis level group which contains this component, corresponds to s5ChasComGrpIndx. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.8.1.1.1 |
| s5ChasUtilIndxThe index of the component in the group. Corresponds to s5ChasComIndx. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.8.1.1.2 |
| s5ChasUtilSubIndxSub-component index. Corresponds to s5ChasComSubIndx. | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.8.1.1.3 |
| s5ChasUtilTotalCPUUsageThis object returns the percentage of time the CPU has been busy since system initialization. | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.4 |
| s5ChasUtilCPUUsageLast1MinuteThis object returns the percentage of time the CPU has been busy over the last 1 minute. | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.5 |
| s5ChasUtilCPUUsageLast10MinutesThis object returns the percentage of time the CPU has been busy over the last 10 minutes. | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.6 |
| s5ChasUtilCPUUsageLast1HourThis object returns the percentage of time the CPU has been busy over the last 1 hour. | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.7 |
| s5ChasUtilCPUUsageLast24HoursThis object returns the percentage of time the CPU has been busy over the last 24 hours. | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.8 |
| s5ChasUtilMemoryAvailableThis object returns the percentage of dynamic memory that is currently free. This is measured as a percentage of the memory the was available immediately after system initialization. | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.9 |
| s5ChasUtilMemoryMinAvailableThis object returns the lowest percentage of dynamic memory that has been free since system initialization. This is a 'low-water mark' for memory utilization, and is essentially the lowest value of s5ChasUtilMemoryUsage… | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.10 |
| s5ChasUtilCPUUsageLast10SecondsThis object returns the percentage of time the CPU has been busy over the last 10 seconds. | Unsigned32 Constraints: range: 0-100 | .1.3.6.1.4.1.45.1.6.3.8.1.1.11 |
| s5ChasUtilMemoryTotalMBThis object returns the total RAM of unit. | MegaBytesUnsigned32 Constraints: range: 0-1024 | .1.3.6.1.4.1.45.1.6.3.8.1.1.12 |
| s5ChasUtilMemoryAvailableMBThis object returns the available RAM of unit. | MegaBytesUnsigned32 Constraints: range: 0-1024 | .1.3.6.1.4.1.45.1.6.3.8.1.1.13 |
s5ChasPsRpsuTable
table.1.3.6.1.4.1.45.1.6.3.9.1
·
1 row entry
·
5 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasPsRpsuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasPsRpsuTable'
A table that contains extended information on RPSU power supply components.
A row in the s5ChasPsRpsuTable. Rows
in this table will exist for each existing
row in the s5ChasComTable which represents
any RPSU power supply. The values of the
indices of a row in this table will be equal
to those…
in this table will exist for each existing
row in the s5ChasComTable which represents
any RPSU power supply. The values of the
indices of a row in this table will be equal
to those…
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| s5ChasPsRpsuGrpIndxThe index of the chassis level group which contains this component, corresponds to s5ChasComGrpIndx. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.9.1.1.1 | ||||||
| s5ChasPsRpsuIndxThe index of the component in the group. Corresponds to s5ChasComIndx. | Integer32 Constraints: range: 1-32767 | .1.3.6.1.4.1.45.1.6.3.9.1.1.2 | ||||||
| s5ChasPsRpsuSubIndxSub-component index. Corresponds to s5ChasComSubIndx. | Integer32 Constraints: range: 0-32767 | .1.3.6.1.4.1.45.1.6.3.9.1.1.3 | ||||||
| s5ChasPsRpsuTypeThis object returns the specific type of RPSU. It can be set to indicate to the system the type of installed RPSU in cases where the RPSU type cannot be automatically detected. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.45.1.6.3.9.1.1.4 | ||||||
| s5ChasPsRpsuSourceConfigThis object is used to specify how a particular RPSU should be used by the system, as follows: ups(1) Indicates that the RPSU should be used only as an uninterruptible power source for devi… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.45.1.6.3.9.1.1.5 |
s5ChasPsuInfoTable
table.1.3.6.1.4.1.45.1.6.3.9.2
·
1 row entry
·
8 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasPsuInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasPsuInfoTable'
A table that contains information about the power supply units that are plugged into the switch.
A row in the s5ChasPsuInfoTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| s5ChasPsuInfoPsuIdThe power supply ID. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.45.1.6.3.9.2.1.1 |
| s5ChasPsuInfoOrderCodeThe order code for the power supply. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.9.2.1.2 |
| s5ChasPsuInfoOrderCodeRevThe order code revision for the power supply. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.9.2.1.3 |
| s5ChasPsuInfoDescriptionA short description for the power supply. It should be similar to one of the following: AC-DC-12V-250W AC-DC-56V1400W-F2B | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.9.2.1.4 |
| s5ChasPsuInfoSerialNumberThe serial number for the power supply. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.9.2.1.5 |
| s5ChasPsuInfoSuppPartNumThe unique part number, given by the supplier/manufacturer. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.9.2.1.6 |
| s5ChasPsuInfoModelRevisionThe model revision for the power supply. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.9.2.1.7 |
| s5ChasPsuInfoManufacturerThe name of the manufacturer of the power supply. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.9.2.1.8 |
s5ChasGbicInfoTable
table.1.3.6.1.4.1.45.1.6.3.12.1
·
1 row entry
·
12 columns
Uses the nortel variant from
Command help
/opt/observium/mibs/nortel.
Walk s5ChasGbicInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'S5-CHASSIS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'S5-CHASSIS-MIB::s5ChasGbicInfoTable'
A table that contains information about pluggable ports.
A row in the s5ChasGbicInfoTable.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| s5ChasGbicInfoIfIndexA unique value, greater than zero, for each interface. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.45.1.6.3.12.1.1.1 | ||||||
| s5ChasGbicInfoGbicTypeThe type of pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.2 | ||||||
| s5ChasGbicInfoWavelengthThe wavelength value measured in nanometers for the pluggable part. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.45.1.6.3.12.1.1.3 | ||||||
| s5ChasGbicInfoVendorNameThe name of the vendor of the pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.4 | ||||||
| s5ChasGbicInfoVendorOuiThe Organizationally Unique Identifier (OUI) of the pluggable part. | OctetString Constraints: range: 3-3 | .1.3.6.1.4.1.45.1.6.3.12.1.1.5 | ||||||
| s5ChasGbicInfoVendorPartNoThe vendor part number of the pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.6 | ||||||
| s5ChasGbicInfoVendorRevisionThe vendor revision of the pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.7 | ||||||
| s5ChasGbicInfoVendorSerialThe vendor serial number for the pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.8 | ||||||
| s5ChasGbicInfoHwOptionsThe hardware options supported by the pluggable part. | Bits Enumerated Values:
| .1.3.6.1.4.1.45.1.6.3.12.1.1.9 | ||||||
| s5ChasGbicInfoDateCodeThe manufacturing date of the pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.10 | ||||||
| s5ChasGbicInfoCleiCodeThe Common Language Equipment Identification Code of the pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.11 | ||||||
| s5ChasGbicInfoProductCodeThe product code of the pluggable part. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.45.1.6.3.12.1.1.12 |